Optimization of CO fermentation by Clostridium carboxidivorans in batch reactors: Effects of the medium composition.

OBJECTIVES: The objective of this study was to investigate the effects of medium composition on CO fermentation by Clostridium carboxidivorans. The focus was to reduce the medium cost preserving acceptable levels of solvent production. METHODS: Yeast extract (YE) concentration was set in the range of 0-3 g/L. Different reducing agents were investigated, including cysteine-HCl 0.6 g/L, pure cysteine 0.6 g/L, sodium sulphide (Na2S) 0.6 g/L, cysteine-sodium sulphide 0.6 g/L and cysteine-sodium sulphide 0.72 g/L. The concentration of the metal solution was decreased down to 25 % of the standard value. Fermentation tests were also carried out with and without tungsten or selenium. RESULTS: The results demonstrated that under optimized conditions, namely yeast extract (YE) concentration set at 1 g/L, pure cysteine as the reducing agent and trace metal concentration reduced to 75 % of the standard value, reasonable solvent production was achieved in less than 150 h. Under these operating conditions, the production levels were found to be 1.39 g/L of ethanol and 0.27 g/L of butanol. Furthermore, the study revealed that selenium was not necessary for C. carboxidivorans fermentation, whereas the presence of tungsten played a crucial role in both cell growth and solvent production. CONCLUSIONS: The optimization of the medium composition in CO fermentation by Clostridium carboxidivorans is crucial for cost-effective solvent production. Tuning the yeast extract (YE) concentration, using pure cysteine as the reducing agent and reducing trace metal concentration contribute to reasonable solvent production within a relatively short fermentation period. Tungsten is essential for cell growth and solvent production, while selenium is not required.

Continuous H-B-E fermentation by Clostridium carboxidivorans: CO vs syngas.

Leveraging renewable carbon-based resources for energy and chemical production is a promising approach to decrease reliance on fossil fuels. This entails a thermo/biotechnological procedure wherein bacteria, notably Clostridia, ferment syngas, converting CO or CO2 + H2 into Hexanol, Butanol and Ethanol (H-B-E fermentation). This work reports of Clostridium carboxidivorans performance in a stirred tank reactor continuously operated with respect to the gas and the cell/liquid phases. The primary objective was to assess acid and solvent production at pH 5.6 by feeding pure CO or synthetic syngas under gas flow differential conditions. Fermentation tests were conducted at four different dilution rates (DL) of the fresh medium in the range 0.034-0.25 h-1. The fermentation pathways of C. carboxidivorans were found to be nearly identical for both CO and syngas, with consistent growth and metabolite production at pH 5.6 within a range of dilution rates. Wash-out conditions were observed at a DL of 0.25 h-1 regardless of the carbon source. Ethanol was the predominant solvent produced, but a shift towards butanol production was observed with CO as the substrate and towards hexanol production with synthetic syngas. In particular, the maximum cell concentration (0.5 gDM/L) was obtained with pure CO at DL 0.05 h-1; the highest solvent productivity (60 mg/L*h of total solvent) was obtained at DL 0.17 h-1 by using synthetic syngas as C-source. The findings highlight the importance of substrate composition and operating conditions in syngas fermentation processes. These insights contribute to the optimization of syngas fermentation processes for biofuel and chemical production.