Dual Role of Mo6 S8 in Polysulfide Conversion and Shuttle for Mg-S Batteries.

Magnesium-Sulfur batteries are one of most appealing options among the post-lithium battery systems due to its potentially high energy density, safe and sustainable electrode materials. The major practical challenges are originated from the soluble magnesium polysulfide intermediates and their shuttling between the electrodes, which cause high overpotentials, low sulfur utilization, and poor Coulombic efficiency. Herein, a functional Mo6 S8 modified separator is designed to effectively address these issues. Both the experimental results and density functional theory calculations show that the electrochemically active Mo6 S8 layer has a superior adsorption capability of polysulfides and simultaneously acts as a mediator to accelerate the polysulfide conversion kinetics. Remarkably, the magnesium-sulfur cell assembled with the functional separator delivers a high specific energy density (942.9 mA h g-1 in the 1st cycle) and can be cycled at 0.2 C for 200 cycles with a Coulombic efficiency of 96%. This work demonstrates a new design concept toward high-performance metal-sulfur batteries.

Element-specific investigations of ultrafast dynamics in photoexcited Cu2ZnSnS4 nanoparticles in solution.

Ultrafast, light-induced dynamics in copper-zinc-tin-sulfide (CZTS) photovoltaic nanoparticles are investigated through a combination of optical and x-ray transient absorption spectroscopy. Laser-pump, x-ray-probe spectroscopy on a colloidal CZTS nanoparticle ink yields element-specificity, which reveals a rapid photo-induced shift of electron density away from Cu-sites, affecting the molecular orbital occupation and structure of CZTS. We observe the formation of a stable charge-separated and thermally excited structure, which persists for nanoseconds and involves an increased charge density at the Zn sites. Combined with density functional theory calculations, the results provide new insight into the structural and electronic dynamics of CZTS absorbers for solar cells.

Multi-Electron Reactions Enabled by Anion-Based Redox Chemistry for High-Energy Multivalent Rechargeable Batteries.

The development of multivalent metal (such as Mg and Ca) based battery systems is hindered by lack of suitable cathode chemistry that shows reversible multi-electron redox reactions. Cationic redox centres in the classical cathodes can only afford stepwise single-electron transfer, which are not ideal for multivalent-ion storage. The charge imbalance during multivalent ion insertion might lead to an additional kinetic barrier for ion mobility. Therefore, multivalent battery cathodes only exhibit slope-like voltage profiles with insertion/extraction redox of less than one electron. Taking VS4 as a model material, reversible two-electron redox with cationic-anionic contributions is verified in both rechargeable Mg batteries (RMBs) and rechargeable Ca batteries (RCBs). The corresponding cells exhibit high capacities of >300 mAh g-1 at a current density of 100 mA g-1 in both RMBs and RCBs, resulting in a high energy density of >300 Wh kg-1 for RMBs and >500 Wh kg-1 for RCBs. Mechanistic studies reveal a unique redox activity mainly at anionic sulfides moieties and fast Mg2+ ion diffusion kinetics enabled by the soft structure and flexible electron configuration of VS4 .

A Protocol for Fast Prediction of Electronic and Optical Properties of Donor-Acceptor Polymers Using Density Functional Theory and the Tight-Binding Method.

The ability of donor-acceptor (D-A) type polymers to control the positions of the highest occupied (HOMO) and lowest unoccupied (LUMO) molecular orbitals makes them a popular choice for organic solar cell applications. The alternating D-A pattern in a monomer leads to a weak electronic coupling between the constituent monomers within the polymer chain. Exploiting the weak electronic coupling characteristics, we developed a method to efficiently calculate (1) the electronic properties and (2) the optical gap of such polymer chains. The electronic properties (HOMO and LUMO energies, ionization potential, electron affinity, and quasiparticle gap of an oligomer of any length up to an infinitely long polymer) of the D-A polymers are predicted by combining density functional theory calculation results and a tight-binding model. The weak electronic coupling implies that the optical gap of the polymer is size-independent, and thus, it can be calculated using a monomer. We validated the methods using a set of 104 polymers by checking the consistency where the electronic gap of a polymer is larger than the optical gap. Furthermore, we establish relationships between the results obtained from more accurate, yet slower methods (i.e., B3LYP functional, singlet-ΔSCF) with those obtained from the faster counterparts (i.e., BLYP functional, triplet-ΔSCF). Leveraging the found relationships, we propose a way in which the electronic and optical properties of the polymers can be calculated efficiently while retaining high accuracy. The use of the tight-binding model combined with the approach to estimate more accurate results based on less expensive simulations is crucial in the applications where a large volume of computations needs to be carried out efficiently with sufficiently high accuracy, such as high-throughput computational screening or training a machine-learning model.

Quantization of Hall Resistance at the Metallic Interface between an Oxide Insulator and SrTiO_{3}.

The two-dimensional metal forming at the interface between an oxide insulator and SrTiO_{3} provides new opportunities for oxide electronics. However, the quantum Hall effect, one of the most fascinating effects of electrons confined in two dimensions, remains underexplored at these complex oxide heterointerfaces. Here, we report the experimental observation of quantized Hall resistance in a SrTiO_{3} heterointerface based on the modulation-doped amorphous-LaAlO_{3}/SrTiO_{3} heterostructure, which exhibits both high electron mobility exceeding 10,000 cm^{2}/V s and low carrier density on the order of ∼10^{12} cm^{-2}. Along with unambiguous Shubnikov-de Haas oscillations, the spacing of the quantized Hall resistance suggests that the interface is comprised of a single quantum well with ten parallel conducting two-dimensional sub-bands. This provides new insight into the electronic structure of conducting oxide interfaces and represents an important step towards designing and understanding advanced oxide devices.

Orbital-free effective embedding potential at nuclear cusps.

A strategy to construct approximants to the kinetic-energy-functional dependent component (v(t)[rho(A),rho(B)](r)) of the effective potential in one-electron equations for orbitals embedded in a frozen-density environment [Eqs. (20) and (21) in Wesolowski and Warshel, J. Phys. Chem. 97, (1993) 8050] is proposed. In order to improve the local behavior of the orbital-free effective embedding potential near nuclei in the environment, the exact behavior of v(t)[rho(A),rho(B)](r) at rho(A)-->0 and integralrho(B)dr=2 is taken into account. As a result, the properties depending on the quality of this potential are invariably improved compared to the ones obtained using conventional approximants which violated the considered exact condition. The approximants obtained following the proposed strategy and especially the simplest one constructed in this work are nondecomposable, i.e., cannot be used to obtain the analytic expression for the functional of the total kinetic energy.