RESUMEN
The primary challenge facing silicon-based electronics, crucial for modern technological progress, is difficulty in dimensional scaling. This stems from a severe deterioration of transistor performance due to carrier scattering when silicon thickness is reduced below a few nanometres. Atomically thin two-dimensional (2D) semiconductors still maintain their electrical characteristics even at sub-nanometre scales and offer the potential for monolithic three-dimensional (3D) integration. Here we explore a strategic shift aimed at addressing the scaling bottleneck of silicon by adopting 2D semiconductors as new channel materials. Examining both academic and industrial viewpoints, we delve into the latest trends in channel materials, the integration of metal contacts and gate dielectrics, and offer insights into the emerging landscape of industrializing 2D semiconductor-based transistors for monolithic 3D integration.
RESUMEN
Negative-differential-resistance (NDR) devices offer a promising pathway for developing future computing technologies characterized by exceptionally low energy consumption, especially multivalued logic computing. Nevertheless, conventional approaches aimed at attaining the NDR phenomenon involve intricate junction configurations and/or external doping processes in the channel region, impeding the progress of NDR devices to the circuit and system levels. Here, an NDR device is presented that incorporates a channel without junctions. The NDR phenomenon is achieved by introducing a metal-insulator-semiconductor capacitor to a portion of the channel area. This approach establishes partial potential barrier and well that effectively restrict the movement of hole and electron carriers within specific voltage ranges. Consequently, this facilitates the implementation of both a ternary inverter and a ternary static-random-access-memory, which are essential components in the development of multivalued logic computing technology.
RESUMEN
Three-dimensional (3D) hetero-integration technology is poised to revolutionize the field of electronics by stacking functional layers vertically, thereby creating novel 3D circuity architectures with high integration density and unparalleled multifunctionality. However, the conventional 3D integration technique involves complex wafer processing and intricate interlayer wiring. Here we demonstrate monolithic 3D integration of two-dimensional, material-based artificial intelligence (AI)-processing hardware with ultimate integrability and multifunctionality. A total of six layers of transistor and memristor arrays were vertically integrated into a 3D nanosystem to perform AI tasks, by peeling and stacking of AI processing layers made from bottom-up synthesized two-dimensional materials. This fully monolithic-3D-integrated AI system substantially reduces processing time, voltage drops, latency and footprint due to its densely packed AI processing layers with dense interlayer connectivity. The successful demonstration of this monolithic-3D-integrated AI system will not only provide a material-level solution for hetero-integration of electronics, but also pave the way for unprecedented multifunctional computing hardware with ultimate parallelism.
RESUMEN
The concept of remote epitaxy involves a two-dimensional van der Waals layer covering the substrate surface, which still enable adatoms to follow the atomic motif of the underlying substrate. The mode of growth must be carefully defined as defects, e.g., pinholes, in two-dimensional materials can allow direct epitaxy from the substrate, which, in combination with lateral epitaxial overgrowth, could also form an epilayer. Here, we show several unique cases that can only be observed for remote epitaxy, distinguishable from other two-dimensional material-based epitaxy mechanisms. We first grow BaTiO3 on patterned graphene to establish a condition for minimizing epitaxial lateral overgrowth. By observing entire nanometer-scale nuclei grown aligned to the substrate on pinhole-free graphene confirmed by high-resolution scanning transmission electron microscopy, we visually confirm that remote epitaxy is operative at the atomic scale. Macroscopically, we also show variations in the density of GaN microcrystal arrays that depend on the ionicity of substrates and the number of graphene layers.
RESUMEN
Two-dimensional (2D) materials and their heterostructures show a promising path for next-generation electronics1-3. Nevertheless, 2D-based electronics have not been commercialized, owing mainly to three critical challenges: i) precise kinetic control of layer-by-layer 2D material growth, ii) maintaining a single domain during the growth, and iii) wafer-scale controllability of layer numbers and crystallinity. Here we introduce a deterministic, confined-growth technique that can tackle these three issues simultaneously, thus obtaining wafer-scale single-domain 2D monolayer arrays and their heterostructures on arbitrary substrates. We geometrically confine the growth of the first set of nuclei by defining a selective growth area via patterning SiO2 masks on two-inch substrates. Owing to substantial reduction of the growth duration at the micrometre-scale SiO2 trenches, we obtain wafer-scale single-domain monolayer WSe2 arrays on the arbitrary substrates by filling the trenches via short growth of the first set of nuclei, before the second set of nuclei is introduced, thus without requiring epitaxial seeding. Further growth of transition metal dichalcogenides with the same principle yields the formation of single-domain MoS2/WSe2 heterostructures. Our achievement will lay a strong foundation for 2D materials to fit into industrial settings.
RESUMEN
Recent advances in flexible and stretchable electronics have led to a surge of electronic skin (e-skin)-based health monitoring platforms. Conventional wireless e-skins rely on rigid integrated circuit chips that compromise the overall flexibility and consume considerable power. Chip-less wireless e-skins based on inductor-capacitor resonators are limited to mechanical sensors with low sensitivities. We report a chip-less wireless e-skin based on surface acoustic wave sensors made of freestanding ultrathin single-crystalline piezoelectric gallium nitride membranes. Surface acoustic wave-based e-skin offers highly sensitive, low-power, and long-term sensing of strain, ultraviolet light, and ion concentrations in sweat. We demonstrate weeklong monitoring of pulse. These results present routes to inexpensive and versatile low-power, high-sensitivity platforms for wireless health monitoring devices.
Asunto(s)
Monitoreo Fisiológico , Tecnología de Sensores Remotos , Dispositivos Electrónicos Vestibles , Humanos , Monitoreo Fisiológico/instrumentación , Pulso Arterial , Tecnología de Sensores Remotos/instrumentación , Semiconductores , Sudor/químicaRESUMEN
Electronic skins (e-skins)-electronic sensors mechanically compliant to human skin-have long been developed as an ideal electronic platform for noninvasive human health monitoring. For reliable physical health monitoring, the interface between the e-skin and human skin must be conformal and intact consistently. However, conventional e-skins cannot perfectly permeate sweat in normal day-to-day activities, resulting in degradation of the intimate interface over time and impeding stable physical sensing. Here, we present a sweat pore-inspired perforated e-skin that can effectively suppress sweat accumulation and allow inorganic sensors to obtain physical health information without malfunctioning. The auxetic dumbbell through-hole patterns in perforated e-skins lead to synergistic effects on physical properties including mechanical reliability, conformability, areal mass density, and adhesion to the skin. The perforated e-skin allows one to laminate onto the skin with consistent homeostasis, enabling multiple inorganic sensors on the skin to reliably monitor the wearer's health over a period of weeks.
RESUMEN
Free-standing crystalline membranes are highly desirable owing to recent developments in heterogeneous integration of dissimilar materials. Van der Waals (vdW) epitaxy enables the release of crystalline membranes from their substrates. However, suppressed nucleation density due to low surface energy has been a challenge for crystallization; reactive materials synthesis environments can induce detrimental damage to vdW surfaces, often leading to failures in membrane release. This work demonstrates a novel platform based on graphitized SiC for fabricating high-quality free-standing membranes. After mechanically removing epitaxial graphene on a graphitized SiC wafer, the quasi-two-dimensional graphene buffer layer (GBL) surface remains intact for epitaxial growth. The reduced vdW gap between the epilayer and substrate enhances epitaxial interaction, promoting remote epitaxy. Significantly improved nucleation and convergent quality of GaN are achieved on the GBL, resulting in the best quality GaN ever grown on two-dimensional materials. The GBL surface exhibits excellent resistance to harsh growth environments, enabling substrate reuse by repeated growth and exfoliation.
Asunto(s)
Grafito , Cristalización , SemiconductoresRESUMEN
A memristor1 has been proposed as an artificial synapse for emerging neuromorphic computing applications2,3. To train a neural network in memristor arrays, changes in weight values in the form of device conductance should be distinct and uniform3. An electrochemical metallization (ECM) memory4,5, typically based on silicon (Si), has demonstrated a good analogue switching capability6,7 owing to the high mobility of metal ions in the Si switching medium8. However, the large stochasticity of the ion movement results in switching variability. Here we demonstrate a Si memristor with alloyed conduction channels that shows a stable and controllable device operation, which enables the large-scale implementation of crossbar arrays. The conduction channel is formed by conventional silver (Ag) as a primary mobile metal alloyed with silicidable copper (Cu) that stabilizes switching. In an optimal alloying ratio, Cu effectively regulates the Ag movement, which contributes to a substantial improvement in the spatial/temporal switching uniformity, a stable data retention over a large conductance range and a substantially enhanced programmed symmetry in analogue conductance states. This alloyed memristor allows the fabrication of large-scale crossbar arrays that feature a high device yield and accurate analogue programming capability. Thus, our discovery of an alloyed memristor is a key step paving the way beyond von Neumann computing.
Asunto(s)
Aleaciones/química , Conductividad Eléctrica , Redes Neurales de la Computación , Electrodos , Cinética , Silicio/química , TermodinámicaRESUMEN
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMEN
PURPOSE: The purpose of this study is to compare the progression rate of bone union and clinical outcomes of opening wedge high tibial osteotomy (OWHTO) using allogenous bone chip or tri-calcium phosphate (TCP) granule as bone graft materials. The hypothesis was that the bone union progression in OWHTOs using TCP granule grafts would be comparable to that of OWHTOs using allogenous bone chip grafts. METHODS: Between 2011 and 2013, 54 patients who had undergone OWHTO for genu varum and osteoarthritis were randomized to one of the two groups at five centres. TCP granule was used to fill the defect in 27 patients and lyophilized allogenous bone chip was used in the other 27 patients. The degree of bone union was classified on a five-point scale and evaluated using plain radiographs of the knee at 6 weeks, 3 months, 6 months, and 12 months postoperatively. Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score, pain Visual Analogue Scale (VAS) score and complications were also evaluated. RESULTS: The highest degree of bone union observed at 6 and 12 months postoperatively was grade 4, and the number of cases of union progression at each time-point was not significantly different between the two groups (p > 0.05). WOMAC and pain VAS scores also showed no differences between the two groups. No complications were observed during the 12-month period following OWHTO in either group. CONCLUSION: OWHTO using TCP granule bone substitute showed similar bone union rates and clinical outcomes compared to allogenous bone chip grafts. TCP granule can be used as bone substitutes instead of allogenous bone chip grafts in OWHTO. LEVEL OF EVIDENCE: Level 1.
Asunto(s)
Fosfatos de Calcio/química , Genu Varum/cirugía , Articulación de la Rodilla/cirugía , Osteoartritis de la Rodilla/cirugía , Osteotomía/métodos , Tibia/cirugía , Adulto , Anciano , Sustitutos de Huesos , Trasplante Óseo , Progresión de la Enfermedad , Femenino , Humanos , Rodilla , Masculino , Persona de Mediana Edad , Periodo Posoperatorio , Estudios Prospectivos , Radiografía , Trasplante Homólogo , Cicatrización de HeridasRESUMEN
Although flakes of two-dimensional (2D) heterostructures at the micrometer scale can be formed with adhesive-tape exfoliation methods, isolation of 2D flakes into monolayers is extremely time consuming because it is a trial-and-error process. Controlling the number of 2D layers through direct growth also presents difficulty because of the high nucleation barrier on 2D materials. We demonstrate a layer-resolved 2D material splitting technique that permits high-throughput production of multiple monolayers of wafer-scale (5-centimeter diameter) 2D materials by splitting single stacks of thick 2D materials grown on a single wafer. Wafer-scale uniformity of hexagonal boron nitride, tungsten disulfide, tungsten diselenide, molybdenum disulfide, and molybdenum diselenide monolayers was verified by photoluminescence response and by substantial retention of electronic conductivity. We fabricated wafer-scale van der Waals heterostructures, including field-effect transistors, with single-atom thickness resolution.
RESUMEN
The transparency of two-dimensional (2D) materials to intermolecular interactions of crystalline materials has been an unresolved topic. Here we report that remote atomic interaction through 2D materials is governed by the binding nature, that is, the polarity of atomic bonds, both in the underlying substrates and in 2D material interlayers. Although the potential field from covalent-bonded materials is screened by a monolayer of graphene, that from ionic-bonded materials is strong enough to penetrate through a few layers of graphene. Such field penetration is substantially attenuated by 2D hexagonal boron nitride, which itself has polarization in its atomic bonds. Based on the control of transparency, modulated by the nature of materials as well as interlayer thickness, various types of single-crystalline materials across the periodic table can be epitaxially grown on 2D material-coated substrates. The epitaxial films can subsequently be released as free-standing membranes, which provides unique opportunities for the heterointegration of arbitrary single-crystalline thin films in functional applications.
RESUMEN
BACKGROUND: Although two-stage exchange arthroplasty is considered a treatment of choice for chronic features of fungal PJI (periprosthetic joint infection), there is no consensus for local use of antifungal agent. The purpose of this study was to evaluate the efficacy of antifungal-impregnated cement spacer (AICS). METHODS: Nine patients who were diagnosed and treated for chronic fungal PJI after TKA in a single center from January 2001 to December 2016 were enrolled. Two-stage exchange arthroplasty was performed. During the 1st stage resection arthroplasty, AICS was inserted for all patients. Systemic antifungal medication was used during the interval between the two stage operations. RESULTS: The average duration from the initial symptom to fungal PJI diagnosis was 20â¯months (range, five to 72â¯months). Average erythrocyte sedimentation rate and C-reactive protein level at diagnosis were 56â¯mm/h (range, 30 to 89â¯mm/h) and 2.25â¯mg/dl (range, 0.11 to 3.97â¯mg/dl), respectively. Fungal PJI was confirmed by open debridement tissue culture in three cases (33%). The average number of operations before final exchange arthroplasty was 2.7 times (range, one to five times). Average duration of antifungal agent use confirmed by sensitivity test was seven months (range, four to 15â¯months). Mean interval between the two stage operations was six months (range, 1.5 to 15â¯months). After two-stage exchange arthroplasty, no patient had recurrent fungal infection during a mean follow-up of 66â¯months (range, 24 to 144â¯months). CONCLUSION: Two-stage exchange arthroplasty with AICS is a very effective strategy with excellent outcomes. LEVEL OF EVIDENCE: Case series, IV.
Asunto(s)
Antifúngicos/administración & dosificación , Artritis Infecciosa/prevención & control , Artroplastia de Reemplazo de Rodilla/efectos adversos , Candidiasis/prevención & control , Prótesis de la Rodilla/efectos adversos , Infecciones Relacionadas con Prótesis/prevención & control , Anciano , Anciano de 80 o más Años , Antibacterianos/uso terapéutico , Artritis Infecciosa/etiología , Artritis Infecciosa/microbiología , Cementos para Huesos , Candida parapsilosis , Candidiasis/etiología , Desbridamiento , Femenino , Humanos , Masculino , Persona de Mediana Edad , Infecciones Relacionadas con Prótesis/etiología , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
STUDY DESIGN: A retrospective review of prospectively collected radiographic and clinical data. OBJECTIVE: This study aims to investigate the relationship between cage subsidence and bone mineral density (BMD), and to reveal the clinical implications of cage subsidence. SUMMARY OF BACKGROUND DATA: Posterior lumbar interbody fusion (PLIF) has become one of the standard treatment modality for lumbar degenerative disease. However, cage subsidence might result in recurrent foraminal stenosis and deteriorate the clinical results. Furthermore, numbers of osteoporosis patients who underwent PLIF are increasing. Therefore, the information on the correlations between cage subsidence, BMD, and clinical results will be of great significance. MATERIALS AND METHODS: A total 139 segments was included in this retrospective study. We examined functional rating index (Visual Analogue Scale for pain, Oswestry Disability Index, Short Form-36 score) preoperatively, and investigated their changes after postoperative 1 year. Correlation between cage subsidence and clinical scores was investigated. Plain anteroposterior and lateral radiograph were taken preoperatively and postoperatively and during follow-up. Preoperative BMD and subsidence measured by postoperative 1 year 3-dimensional computed tomography were achieved and their correlation was assessed. RESULTS: All postoperative clinical scores improved significantly compared with preoperative ones (pain Visual Analogue Scale: 7.34-2.89, Oswestry Disability Index: 25.34-15.86, Short Form-36: 26.45-16.46, all P<0.001). BMD showed significant weak correlation with subsidence (r=-0.285, P<0.001). Severe osteoporotic segments (T score <-3.0) had more risk to develop severe subsidence (>3 mm) compared with the segments in which T score were higher than -3.0 (P=0.012), and its odds ratio was 8.44. Subsidence had no significant correlation with all clinical scores. CONCLUSIONS: This study revealed that cage subsidence is relevant to BMD. However, it was demonstrated that subsidence is not related to the clinical deterioration. Therefore, PLIF procedure which is conducted carefully can be a good surgical option to treat lumbar degenerative disease for osteoporotic patients.
Asunto(s)
Densidad Ósea , Vértebras Lumbares/fisiopatología , Vértebras Lumbares/cirugía , Fusión Vertebral/métodos , Anciano , Femenino , Humanos , Vértebras Lumbares/diagnóstico por imagen , Masculino , Osteoporosis/cirugía , Dimensión del Dolor , Cuidados Posoperatorios , Tomografía Computarizada por Rayos X , Resultado del Tratamiento , Escala Visual AnalógicaRESUMEN
BACKGROUND: Bioactive glass-ceramics have the ability to directly bind to bones and have been widely used as bone graft substitutes due to their high osteoconductivity and biocompatibility. CaO-SiO2-P2O5-B2O3 glass-ceramics are known to have good osteoconductivity and are used as bone graft extenders. METHODS: This study aimed to evaluate the effects of the resorbing properties of glass-ceramics in bone fusion after producing and analyzing three types of CaO-SiO2-P2O5-B2O3 glass-ceramics with high osteoconductivity that had enhanced resorption by having an increased B2O3 content. The three types of CaO-SiO2-P2O5-B2O3 glass-ceramics with B2O3 contents of 8.0, 9.0, and 9.5 weight % were designated and grouped as P20B80, P10B90, and P5B95, respectively. Glass-ceramic types were tested for fusion rates and bone formation by employing the lumbar 5-6 intertransverse process fusion model in 51 New Zealand male rabbits. Bioactivity was assessed by soaking in simulated body fluid (SBF). RESULTS: In vitro study results showed sufficient hydroxycarbonate apatite layer formation occurred for P20B80 in1 day, for P10B90 in 3 days, and for P5B95 in 5 days after soaking in SBF. For the rabbit lumbar spine posterolateral fusion model, the autograft group recorded a 100% fusion rate with levels significantly higher than those of P20B80 (29.4%), P10B90 (0%), and P5B95 (14.3%), with high resorbing properties. Resorbing property differences among the three glass-ceramic groups were not significant. Histological results showed new bone formation confirming osteoconductivity in all three types of glass-ceramics. Radiomorphometric results also confirmed the resorbing properties of the three glass-ceramic types. CONCLUSIONS: The high resorbing properties and osteoconductivity of porous glass-ceramics can be advantageous as no glass-ceramics remain in the body. However, their relatively fast rate of resorption in the body negatively affects their role as an osteoconductive scaffold as glass-ceramics are resorbed before bony fusion.
Asunto(s)
Sustitutos de Huesos/uso terapéutico , Cerámica/uso terapéutico , Región Lumbosacra/cirugía , Fusión Vertebral/métodos , Animales , Resorción Ósea , Sustitutos de Huesos/efectos adversos , Cerámica/efectos adversos , Conductividad Eléctrica , Masculino , ConejosRESUMEN
BACKGROUND: In cervical anterior approach, transverse skin incision is preferred due to cosmetic reasons. Precise skin incision is required to reach the surgery segment while minimizing soft tissue injury. Skin incision site is frequently identified using C-arm fluoroscopy or the carotid tubercle. Accordingly, this study was conducted to investigate the efficacy of skin incision using the carotid tubercle as a marker. METHODS: This study was retrospectively conducted on 114 patients who underwent anterior cervical surgery by the same surgeon from April 2004 to June 2012. The rate of the appropriate insertion of K-wire, which was inserted into the disc after anterior approach, into the surgery segment was compared between 62 patients where skin incision site was identified using C-arm fluoroscopy before skin incision and 52 patients where skin incision site was identified using carotid tubercle palpitation before surgery. RESULTS: The needle was shown to have been inserted into the planned site in 106 patients out of the total 114 patients. The appropriate insertion of the needle was shown in 59 patients of group I (95.2%) and in 47 patients of group II (90.4%). Although the success rate was higher in group I than group II, it was statistically insignificant. The success rate of one-segment surgery was shown to be 89.7% in group I and 82.6% in group II. Although the success rate was higher in group I than group II, it was statistically insignificant. The success rate of two-segment surgery was shown to be 100% in group I, and 96.4% in group II due to one case of the failure at C3-4 and C5-6. The success rate of three- and four-segment surgeries was shown to be 100% in both groups. CONCLUSIONS: The identification of skin incision site via carotid tubercle palpation was useful for surgeries involving two or more segments. Furthermore, it could be useful for one-segment surgery if surgical site is identified using vertebral body or soft tissues such as longus collis rather than insertion into the disc.
Asunto(s)
Vértebras Cervicales/anatomía & histología , Vértebras Cervicales/cirugía , Fluoroscopía/métodos , Palpación/métodos , Adulto , Puntos Anatómicos de Referencia/anatomía & histología , Puntos Anatómicos de Referencia/diagnóstico por imagen , Vértebras Cervicales/diagnóstico por imagen , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios RetrospectivosRESUMEN
BACKGROUND: Inflammation related hematological parameters vary greatly depending on patients. It is not well known how much increase of which parameter warrants suspicion of postoperative infection. This study proposes to identify the normal range and the predictive factors for postoperative infection by conducting a time series analysis of the hematological parameters of patients after the spinal posterior fusion. METHODS: A retrospective study was done with 608 patients who underwent spinal posterior fusion with pedicle screw fixation. Laboratory assessment including the leucocyte, neutrophil, C-reactive protein (CRP), and erythrocyte sedimentation rate (ESR) of patients for 2 weeks after operation. The patients were divided into the one-level fusion group (group I), the two-level fusion group (group II), the three or multi-level fusion or reoperation group (group III), and the postoperative infection group (group IV). Blood was drawn before breakfast prior to the operation, and then 2-3 days, 4-7 days, 8-11 days, and 12-14 days after the operation. The leucocyte count, neutrophil count, CRP, and ESR were measured. RESULTS: From 4-7 days after the operation, the CRP and neutrophil count of group IV were significantly higher than those of group I and II, and from 8-11 days after operation, the CRP and neutrophil counts were significantly higher than those of all groups. Twelve to fourteen days after the operation, the neutrophil count of group IV was significantly higher than that of group I and II, while the neutrophil count of group III was also higher than that of group I. The lower limit of the 95% confidence interval (CI) of the CRP and neutrophil count group IV was greater than the upper limit of the 95% CI of group I and II. The ESR of group IV was significantly higher than that of group I and III. CONCLUSIONS: If the postoperative CRP and neutrophil counts are high, or if the CRP begins to rise again 8 days after the operation, the likelihood of infection increases, but caution must be exercised in interpreting the results. If the hematological parameters are higher than the lower limit of the 95% CI of the postoperative infection group, infection must be strongly suspected.