RESUMEN
Layered or chain materials have received significant research attention owing to their interesting physical properties, which can dramatically change when the material is thinned from bulk (three-dimensional) to thin two-dimensional sheet or one-dimensional (1D) chain form. Materials with the stoichiometry AX2 with A = Si or Ge and X = S or Se form an especially intriguing semiconducting class. For example, bulk silicon dichalcogenides (SiX2) consist of 1D chains held together by van der Waals forces. Although this structural configuration has the potential to reveal interesting physical phenomena within the 1D limit, obtaining SiX2 single chains has been challenging. We here examine experimentally and theoretically SiX2 materials in the low chain number limit. Carbon nanotubes serve as growth templates and stabilize and protect the structures, and atomic-resolution scanning transmission electron microscopy directly identifies the atomic structure. Two distinct chain structures are observed for SiX2. SixGe1-xS2(1-y)Se2y quaternary alloy chains are also synthesized and characterized, demonstrating tunable semiconducting properties at the atomic-chain level. Density functional theory calculations reveal that the band gap of these alloy chains can be widely tuned through composition engineering. This work offers the possibilities for synthesizing and controlling semiconductor compositions at the single-chain limit to tailor material properties.
RESUMEN
Monolayer transition metal dichalcogenides (TMDs) have emerged as highly promising candidates for optoelectronic applications due to their direct band gap and strong light-matter interactions. However, exfoliated TMDs have demonstrated optical characteristics that fall short of expectations, primarily because of significant defects and associated doping in the synthesized TMD crystals. Here, we report the improvement of optical properties in monolayer TMDs of MoS2, MoSe2, WS2, and WSe2, by hBN-encapsulation annealing. Monolayer WSe2 showed 2000% enhanced photoluminescence quantum yield (PLQY) and 1000% increased lifetime after encapsulation annealing at 1000 °C, which are attributed to dominant radiative recombination of excitons through dedoping of monolayer TMDs. Furthermore, after encapsulation annealing, the transport characteristics of monolayer WS2 changed from n-type to ambipolar, along with an enhanced hole transport, which also support dedoping of annealed TMDs. This work provides an innovative approach to elevate the optical grade of monolayer TMDs, enabling the fabrication of high-performance optoelectronic devices.
RESUMEN
The development of photostimulated-motion artificial reflex arcs - a neural circuit inspired by light-driven motion reflexes - holds significant promises for advancements in robotic perception, navigation, and motion control. However, the fabrication of such systems, especially those that accommodate multiple actions and exhibit gradient responses, remains challenging. Here, a gradient-responsive photostimulated-motion artificial reflex arc is developed by integrating a programmable and tunable photoreceptor based on folded MoS2 at different twist angles. The twisted folded bilayer MoS2 used as photoreceptors can be customized via the transfer technique using patternable paraffin, where the twist angle and fold-line could be controlled. The photoluminescence (PL) intensity is 3.7 times higher at a twist angle of 29° compared to that at 0°, showing a monotonically decreasing indirect bandgap. Through tunable interlayer carrier transport, photoreceptors fabricated using folded bilayer MoS2 at different twist angles demonstrate gradient response time, enabling the photostimulated-motion artificial reflex arc for multiaction responses. They are transformed to digital command flow and studied via machine learning to control the gestures of a robotic hand, showing a prototype of photostimulated gradient-responsive artificial reflex arcs for the first time. This work provides a unique idea for developing intelligent soft robots and next-generation human-computer interfaces.
RESUMEN
Background and objectives: This study investigates the effects of chest mobilization and breathing exercises on respiratory function, trunk stability, and endurance in chronic stroke patients who have contracted coronavirus disease (COVID-19). Materials and Methods: Thirty inpatients of a tertiary hospital in South Korea, who had a history of COVID-19 and were diagnosed with stroke within the last 6 months, were randomly assigned to either chest mobilization exercise with breathing exercise (CMEBE) or conservative physical therapy with breathing exercise (CPTBE) groups. The respiratory function, trunk stability, and endurance were measured at baseline and 6 weeks after the interventions. Results: Both CMEBE and CPTBE groups showed improvements in respiratory function, trunk stability, and endurance after the intervention (p < 0.05). However, the CMEBE group showed significantly greater improvements in forced expiratory volume in 1 s (p < 0.05), trunk stability (p < 0.05), and endurance (p < 0.05) than the CPTBE group. No significant intergroup difference was observed in forced vital capacity and peak expiratory flow. Conclusions: The combination of chest mobilization and breathing exercises improved respiratory muscle mobility and endurance, stabilized the trunk, and enhanced balance and the transfer of weight. The findings suggest that this intervention could be beneficial in improving respiratory function and endurance in stroke patients.
Asunto(s)
COVID-19 , Coronavirus , Accidente Cerebrovascular , Humanos , Ejercicios Respiratorios , Respiración , Accidente Cerebrovascular/complicaciones , Accidente Cerebrovascular/terapiaRESUMEN
Magnetic materials in reduced dimensions are not only excellent platforms for fundamental studies of magnetism, but they play crucial roles in technological advances. The discovery of intrinsic magnetism in monolayer 2D van der Waals systems has sparked enormous interest, but the single-chain limit of 1D magnetic van der Waals materials has been largely unexplored. This paper reports on a family of 1D magnetic van der Waals materials with composition MX3 (M = Cr, V, and X = Cl, Br, I), prepared in fully-isolated fashion within the protective cores of carbon nanotubes. Atomic-resolution scanning transmission electron microscopy identifies unique structures that differ from the well-known 2D honeycomb lattice MX3 structure. Density functional theory calculations reveal charge-driven reversible magnetic phase transitions.
RESUMEN
Neuroelectrical signals transmitted onto the skin tend to decay to an extremely weak level, making them highly susceptible to interference from the environment and body movement. Meanwhile, for comprehensively understanding cognitive nerve conduction, multimodal sensing of neural signals, such as magnetic resonance imaging (MRI) and functional near-infrared spectroscopy (fNIRS), is highly required. Previous metal or polymer conductors cannot either provide a seamless on-skin feature for accurate sensing of neuroelectrical signals or be compatible with multimodal imaging techniques without opto- and magnet- artifacts. Herein, a ≈20 nm thick MXene film that is able to simultaneously detect electrophysiological signals and perform imaging by MRI and fNIRS with high fidelity is reported. The ultrathin film is made of crosslinked Ti3 C2 Tx film via poly (3,4-ethylene dioxythiophene): polystyrene sulfonate (PEDOT: PSS), showing a record high electroconductivity and transparency combination (11 000 S cm-1 @89%). Among them, PEDOT: PSS not only plays a cross-linking role to stabilize MXene film but also shortens the interlayer distance for effective charge transfer and high transparency. Thus, it can achieve a low interfacial impedance with skin or neural surfaces for accurate recording of electrophysiological signals with low motion artifacts. Besides, the high transparency originating from the ultrathin feature leads to good compatibility with fNIRS and MRI without optical and magnetic artifacts, enabling multimodal cognitive neural monitoring during prolonged use.
Asunto(s)
Artefactos , Imanes , Movimiento (Física) , MovimientoRESUMEN
Graphene, with superior electrical tunabilities, has arisen as a multifunctional insertion layer in vertically stacked devices. Although the role of graphene inserted in metal-semiconductor junctions has been well investigated in quasi-static charge transport regime, the implication of graphene insertion at ultrahigh frequencies has rarely been considered. Here, we demonstrate the diode operation of vertical Pt/n-MoSe2/graphene/Au assemblies at ~200-GHz cutoff frequency (fC). The electric charge modulation by the inserted graphene becomes essentially frozen above a few GHz frequencies due to graphene quantum capacitance-induced delay, so that the Ohmic graphene/MoSe2 junction may be transformed to a pinning-free Schottky junction. Our diodes exhibit much lower total capacitance than devices without graphene insertion, deriving an order of magnitude higher fC, which clearly demonstrates the merit of graphene at high frequencies.
RESUMEN
Elemental phosphorus exhibits fascinating structural varieties and versatile properties. The unique nature of phosphorus bonds can lead to the formation of extremely complex structures, and detailed structural information on some phosphorus polymorphs is yet to be investigated. In this study, we investigated an unidentified crystalline phase of phosphorus, type-II red phosphorus (RP), by combining state-of-the-art structural characterization techniques. Electron diffraction tomography, atomic-resolution scanning transmission electron microscopy (STEM), powder X-ray diffraction, and Raman spectroscopy were concurrently used to elucidate the hidden structural motifs and their packing in type-II RP. Electron diffraction tomography, performed using individual crystalline nanowires, was used to identify a triclinic unit cell with volume of 5330â Å3 , which is the largest unit cell for elemental phosphorus crystals up to now and contains approximately 250 phosphorus atoms. Atomic-resolution STEM imaging, which was performed along different crystal-zone axes, confirmed that the twisted wavy tubular motif is the basic building block of type-II RP. Our study discovered and presented a new variation of building blocks in phosphorus, and it provides insights to clarify the complexities observed in phosphorus as well as other relevant systems.
RESUMEN
The packing and connectivity of tetrahedral units are central themes in the structural and electronic properties of a host of solids. Here, we report one-dimensional (1D) chains of GeX2 (X = S or Se) with modification of the tetrahedral connectivity at the single-chain limit. Precise tuning of the edge- and corner-sharing modes between GeX2 blocks is achieved by diameter-dependent 1D confinement inside a carbon nanotube. Atomic-resolution scanning transmission electron microscopy directly confirms the existence of two distinct types of GeX2 chains. Density functional theory calculations corroborate the diameter-dependent stability of the system and reveal an intriguing electronic structure that sensitively depends on tetrahedral connectivity and composition. GeS2(1-x)Se2x compound chains are also realized, which demonstrate the tunability of the system's semiconducting properties through composition engineering.
RESUMEN
Background and Objectives: Common problems in people with COVID-19 include decreased respiratory strength and function. We investigated the effects of thoracic mobilization and respiratory muscle endurance training (TMRT) and lower limb ergometer (LE) training on diaphragm thickness and respiratory function in patients with a history of COVID-19. Materials and Methods: In total, 30 patients were randomly divided into a TMRT training group and an LE training group. The TMRT group performed thoracic mobilization and respiratory muscle endurance training for 30 min three times a week for 8 weeks. The LE group performed lower limb ergometer training for 30 min three times a week for 8 weeks. The participants' diaphragm thickness was measured via rehabilitative ultrasound image (RUSI) and a respiratory function test was conducted using a MicroQuark spirometer. These parameters were measured before the intervention and 8 weeks after the intervention. Results: There was a significant difference (p < 0.05) between the results obtained before and after training in both groups. Right diaphragm thickness at rest, diaphragm thickness during contraction, and respiratory function were significantly more improved in the TMRT group than in the LE group (p < 0.05). Conclusions: In this study, we confirmed the effects of TMRT training on diaphragm thickness and respiratory function in patients with a history of COVID-19.
Asunto(s)
COVID-19 , Entrenamiento Aeróbico , Humanos , Diafragma/diagnóstico por imagen , Diafragma/fisiología , Músculos Respiratorios/fisiología , Respiración , Fuerza Muscular/fisiologíaRESUMEN
The shaping of matter into desired nanometric structures with on-demand functionalities can enhance the miniaturization of devices in nanotechnology. Herein, strong light-matter interaction was used as an optical lithographic tool to tailor two-dimensional (2D) matter into nanoscale architectures. We transformed 2D black phosphorus (BP) into ultrafine, well-defined, beyond-diffraction-limit nanostructures of ten times smaller size and a hundred times smaller spacing than the incident, femtosecond-pulsed light wavelength. Consequently, nanoribbons and nanocubes/cuboids scaling tens of nanometers were formed by the structured ablation along the extremely confined periodic light fields originating from modulation instability, the tailoring process of which was visualized in real time via light-coupled in situ transmission electron microscopy. The current findings on the controllable nanoscale shaping of BP will enable exotic physical phenomena and further advance the optical lithographic techniques for 2D materials.
RESUMEN
Understanding the phase transition mechanisms in two-dimensional (2D) materials is a key to precisely tailor their properties at the nanoscale. Molybdenum ditelluride (MoTe2) exhibits multiple phases at room temperature, making it a promising candidate for phase-change applications. Here, we fabricate lateral 2H-Td interfaces with laser irradiation and probe their phase transitions from micro- to atomic scales with in situ heating in the transmission electron microscope (TEM). By encapsulating the MoTe2 with graphene protection layers, we create an in situ reaction cell compatible with atomic resolution imaging. We find that the Td-to-2H phase transition initiates at phase boundaries at low temperatures (200-225 °C) and propagates anisotropically along the b-axis in a layer-by-layer fashion. We also demonstrate a fully reversible 2H-Td-2H phase transition cycle, which generates a coherent 2H lattice containing inversion domain boundaries. Our results provide insights on fabricating 2D heterophase devices with atomically sharp and coherent interfaces.
RESUMEN
Transition metal dichalcogenides exhibit phase transitions through atomic migration when triggered by various stimuli, such as strain, doping, and annealing. However, since atomically thin 2D materials are easily damaged and evaporated from these strategies, studies on the crystal structure and composition of transformed 2D phases are limited. Here, the phase and composition change behavior of laser-irradiated molybdenum ditelluride (MoTe2 ) in various stacked geometry are investigated, and the stable laser-induced phase patterning in hexagonal boron nitride (hBN)-encapsulated MoTe2 is demonstrated. When air-exposed or single-side passivated 2H-MoTe2 are irradiated by a laser, MoTe2 is transformed into Te or Mo3 Te4 due to the highly accumulated heat and atomic evaporation. Conversely, hBN-encapsulated 2H-MoTe2 transformed into a 1T' phase without evaporation or structural degradation, enabling stable phase transitions in desired regions. The laser-induced phase transition shows layer number dependence; thinner MoTe2 has a higher phase transition temperature. From the stable phase patterning method, the low contact resistivity of 1.13 kΩ µm in 2H-MoTe2 field-effect transistors with 1T' contacts from the seamless heterophase junction geometry is achieved. This study paves an effective way to fabricate monolithic 2D electronic devices with laterally stitched phases and provides insights into phase and compositional changes in 2D materials.
RESUMEN
Two-dimensional crystals' edge structures not only influence their overall properties but also dictate their formation due to edge-mediated synthesis and etching processes. Edges must be carefully examined because they often display complex, unexpected features at the atomic scale, such as reconstruction, functionalization, and uncontrolled contamination. Here, we examine atomic-scale edge structures and uncover reconstruction behavior in bilayer phosphorene. We use in situ transmission electron microscopy (TEM) of phosphorene/graphene specimens at elevated temperatures to minimize surface contamination and reduce e-beam damage, allowing us to observe intrinsic edge configurations. The bilayer zigzag (ZZ) edge was found to be the most stable edge configuration under e-beam irradiation. Through first-principles calculations and TEM image analysis under various tilting and defocus conditions, we find that bilayer ZZ edges undergo edge reconstruction and so acquire closed, self-passivated edge configurations. The extremely low formation energy of the closed bilayer ZZ edge and its high stability against e-beam irradiation are confirmed by first-principles calculations. Moreover, we fabricate bilayer phosphorene nanoribbons with atomically sharp closed ZZ edges. The identified bilayer ZZ edges will aid in the fundamental understanding of the synthesis, degradation, reconstruction, and applications of phosphorene and related structures.
RESUMEN
BACKGROUND: Problems with motor functions, balance and gait ability commonly occur in stroke patients and cause asymmetric posture imbalance and gait patterns. OBJECTIVE: We examined the effects of gait training (GT) combined with portable functional electrical stimulation (FES) on motor functions, balance and gait ability of stroke patients. METHODS: A single blind, randomized control trial was conducted with 34 post stroke patients who were randomly allocated to two groups: 1) FES + GT group (n= 17) and the placebo FES + GT (PLBO + GT) group (n= 17). All interventions were given for 30 minutes, 5 days a week for 4 weeks. Fugl-Meyer assessment (FMA) was used to measure motor function of lower extremity. Performance oriented mobility assessment (POMA) was used to balance and gait ability. OptoGait was used to analyze gait ability. RESULTS: Both groups showed significant improvements in motor function, balance and gait ability. The FES + GT group showed significantly greater improvement in motor function, balance and gait abilities after four weeks compared to the PLBO + GT group. CONCLUSION: It was found that the gait training applied with FES is effective in improving the motor function, balance and gait abilities of stroke patients.
Asunto(s)
Terapia por Estimulación Eléctrica , Rehabilitación de Accidente Cerebrovascular , Accidente Cerebrovascular , Humanos , Método Simple Ciego , Marcha/fisiología , Accidente Cerebrovascular/complicaciones , Estimulación Eléctrica , Resultado del TratamientoRESUMEN
Scanning transmission electron microscopy (STEM) is an indispensable tool for atomic-resolution structural analysis for a wide range of materials. The conventional analysis of STEM images is an extensive hands-on process, which limits efficient handling of high-throughput data. Here, we apply a fully convolutional network (FCN) for identification of important structural features of two-dimensional crystals. ResUNet, a type of FCN, is utilized in identifying sulfur vacancies and polymorph types of MoS2 from atomic resolution STEM images. Efficient models are achieved based on training with simulated images in the presence of different levels of noise, aberrations, and carbon contamination. The accuracy of the FCN models toward extensive experimental STEM images is comparable to that of careful hands-on analysis. Our work provides a guideline on best practices to train a deep learning model for STEM image analysis and demonstrates FCN's application for efficient processing of a large volume of STEM data.
Asunto(s)
Aprendizaje Profundo , Procesamiento de Imagen Asistido por Computador/métodos , Microscopía Electrónica de Transmisión de Rastreo , Molibdeno/químicaRESUMEN
Transition metal dichalcogenides have attracted renewed interest for use as thermoelectric materials owing to their tunable bandgap, moderate Seebeck coefficient, and low thermal conductivity. However, their thermoelectric parameters such as Seebeck coefficient, electrical conductivity, and thermal conductivity are interdependent, which is a drawback. Therefore, it is necessary to find a way to adjust one of these parameters without affecting the other parameters. In this study, we investigated the effect of helium ion irradiation on MoSe2 thin films with the objective of controlling the Seebeck coefficient and electrical conductivity. At the optimal irradiation dose of 1015 cm-2, we observed multiple enhancements of the power factor resulting from an increase in the electrical conductivity, with slight suppression of the Seebeck coefficient. Raman spectroscopy, X-ray diffraction, and transmission electron microscopy analyses revealed that irradiation-induced selenium vacancies played an important role in changing the thermoelectric properties of MoSe2 thin films. These results suggest that helium ion irradiation is a promising method to significantly improve the thermoelectric properties of two-dimensional transition metal dichalcogenides. Effect of He+ irradiation on thermoelectric properties of MoSe2 thin films.
RESUMEN
2D crystals can serve as templates for the realization of new van der Waals (vdW) heterostructures via controlled assembly of low-dimensional functional components. Among available 2D crystals, black phosphorus (BP) is unique due to its puckered atomic surface topography, which may lead to strong epitaxial phenomena through guided vdW assembly. Here, it is demonstrated that a BP template can induce highly oriented assembly of C60 molecular crystals. Transmission electron microscopy and theoretical analysis of the C60 /BP vdW heterostructure clearly confirm that the BP template results in oriented C60 assembly with higher-order commensurism. Lateral and vertical devices with C60 /BP junctions are fabricated via a lithography-free clean process, which allows one to investigate the ideal electrical properties of pristine C60 /BP junctions. Effective tuning of the C60 /BP junction barrier from 0.2 to 0.5 eV and maximum on-current density higher than 104 mA cm-2 are achieved with graphite/C60 /BP vertical vdW transistors. Due to the formation of high-quality C60 film and the semitransparent graphite top-electrode, the vertical transistors show high photoresponsivities up to ≈100 A W-1 as well as a fast response time under visible light illumination.
RESUMEN
Controllable and scalable fabrication is the precondition for realizing the large number of superior electronic and catalytic applications of MoS2. Here, we report a new type of synergistic additives, ammonium salts, for chemical vapor deposition (CVD) growth of MoS2. On the basis of the catalysis of ammonium salts, we can achieve layer and shape-controlled MoS2 domains and centimeter-scale MoS2 films. Compared to frequently used alkali metal ions as the catalysts, ammonium salts are decomposed completely at low temperature (below 513 °C), resulting in clean and nondestructive as-grown substrates. Thus, MoS2 electronic devices can be directly fabricated on them, and the redundant transfer step is no longer needed. This method can also promote the direct growth of MoS2 on the conductive substrate and boost the improvement of hydrogen evolution reaction (HER) performance. The ammonium salt-mediated CVD method will pave a new way for MoS2 toward real applications in modern electronics and catalysis.
RESUMEN
The family of group IV-VI monochalcogenides has an atomically puckered layered structure, and their atomic bond configuration suggests the possibility for the realization of various polymorphs. Here, we report the synthesis of the first hexagonal polymorph from the family of group IV-VI monochalcogenides, which is conventionally orthorhombic. Recently predicted four-atomic-thick hexagonal GeSe, so-called γ-GeSe, is synthesized and clearly identified by complementary structural characterizations, including elemental analysis, electron diffraction, high-resolution transmission electron microscopy imaging, and polarized Raman spectroscopy. The electrical and optical measurements indicate that synthesized γ-GeSe exhibits high electrical conductivity of 3 × 105 S/m, which is comparable to those of other two-dimensional layered semimetallic crystals. Moreover, γ-GeSe can be directly grown on h-BN substrates, demonstrating a bottom-up approach for constructing vertical van der Waals heterostructures incorporating γ-GeSe. The newly identified crystal symmetry of γ-GeSe warrants further studies on various physical properties of γ-GeSe.