Endothelium-Inspired Hemocompatible Silicone Surfaces: An Elegant Balance between Antifouling Properties and Endothelial Cell Selectivity.

To address the adverse reactions caused by the implantation of blood-contacting materials, researchers have developed different strategies, of which mimicking multiple key features of endothelial cells is the most effective. However, simultaneously immobilizing multiple chemical components on a single material surface and maintaining the effects of individual components are challenging. In this work, endothelium-mimicking silicone surfaces were developed by incorporating the antifouling polymer poly(oligo(ethylene glycol) methacrylate), the glycosaminoglycan analog poly(sodium 4-vinyl-benzenesulfonate) and a nitric oxide catalyst (selenocystamine dihydrochloride). Through the rational regulation of multiple chemical components, the surfaces harmoniously resisted nonspecific protein adsorption, platelet adhesion and activation and smooth muscle cell hyperproliferation while promoting endothelial cell proliferation and migration. The coculture experiment with HUVECs and HUVSMCs showed that the optimum selectivity of HUVECs/HUVSMCs was ∼1.7. This work contributes insight into the control of antifouling properties and endothelial selectivity, providing a new avenue for the development of blood-contacting materials.

Spatially Confined π-Complexation within Pore-Space-Partitioned Metal-Organic Frameworks for Enhanced Light Hydrocarbon Separation and Purification.

Ultramicroporous metal-organic frameworks (MOFs) are demonstrated to be advantageous for the separation and purification of light hydrocarbons such as C2H2, C2H4, and CH4. The introduction of transition metal sites with strong π-complexation affinity into MOFs is more effective than other adsorption sites for the selective adsorption of π-electron-rich unsaturated hydrocarbon gases from their mixtures. However, lower coordination numbers make it challenging to produce robust MOFs directly utilizing metal ions with π-coordination activity, such as Cu+, Ag+, and Pd2+. Herein, a series of novel π-complexing MOFs (SNNU-33s) with a pore size of 4.6 Å are precisely constructed by cleverly introducing symmetrically matched C3-type [Cu(pyz)3] (pyz = pyrazine) coordinated fragments into 1D hexagonal channels of MIL-88 prototype frameworks. Benifit from the spatial confinement combined with π-complex-active Cu+ of [Cu(pyz)3], pore-space-partitioned SNNU-33 MOFs all present excellent C2H2/CH4, C2H4/CH4, and CO2/CH4 separation ability. Notably, the optimized SNNU-33b adsorbent demonstrates top-level IAST selectivity values for C2H2/CH4 (597.4) and C2H4/CH4 (69.8), as well as excellent breakthrough performance. Theoretical calculations further reveal that such benchmark light hydrocarbon separation and purification ability is mainly ascribed to the extra-strong binding affinity between Cu+ and π-electron donor molecules via a spatially confined π-complexation process.

METTL4-mediated N6-methyladenine DNA modification regulates thermotolerance in Arabidopsis thaliana.

DNA N6-methyladenine (6 mA) is an evolutionarily conserved DNA modification in procaryotes and eukaryotes. The DNA 6 mA methylation is tightly controlled by 6 mA regulatory proteins. DNA N6-adenine methyltransferase 1 (DAMT-1) has been identified as a DNA 6 mA methyltransferase in animals. In plants, DNA 6 mA methylation has been found, however, the DNA 6 mA methyltransferases and their function in plants are largely unknown. In our study, we find METTL4 is a DNA 6 mA methyltransferase in Arabidopsis thaliana. Both in vitro and in vivo evidences support the DNA 6 mA methyltransferase activity of METTL4. mettl4 mutant is hypersensitive to heat stress, suggesting DNA 6 mA methylation plays important role in heat stress adaption. RNA-seq and 6 mA IP-qPCR analysis show that METTL4 participates in heat stress tolerance by regulating expression of heat responsive genes. Our study find METTL4 is a plant DNA 6 mA methyltransferase and illustrates its function in regulating heat stress response.

Trace Sample Proteome Quantification by Data-Dependent Acquisition without Dynamic Exclusion.

Despite continuous technological improvements in sample preparation, mass-spectrometry-based proteomics for trace samples faces the challenges of sensitivity, quantification accuracy, and reproducibility. Herein, we explored the applicability of turboDDA (a method that uses data-dependent acquisition without dynamic exclusion) for quantitative proteomics of trace samples. After systematic optimization of acquisition parameters, we compared the performance of turboDDA with that of data-dependent acquisition with dynamic exclusion (DEDDA). By benchmarking the analysis of trace unlabeled human cell digests, turboDDA showed substantially better sensitivity in comparison with DEDDA, whether for unfractionated or high pH fractionated samples. Furthermore, through designing an iTRAQ-labeled three-proteome model (i.e., tryptic digest of protein lysates from yeast, human, and E. coli) to document the interference effect, we evaluated the quantification interference, accuracy, reproducibility of iTRAQ labeled trace samples, and the impact of PIF (precursor intensity fraction) cutoff for different approaches (turboDDA and DEDDA). The results showed that improved quantification accuracy and reproducibility could be achieved by turboDDA, while a more stringent PIF cutoff resulted in more accurate quantification but less peptide identification for both approaches. Finally, the turboDDA strategy was applied to the differential analysis of limited amounts of human lung cancer cell samples, showing great promise in trace proteomics sample analysis.

A multifunctional bio-patch crosslinked with glutaraldehyde for enhanced mechanical performance, anti-coagulation properties, and anti-calcification properties.

Bio-patches for the treatment of valvular disease have been evaluated in clinical trials. It has been shown that failure of these devices, occurring within a few years of implantation, may be due to cytotoxicity, immune response, calcification and thrombosis. Some of these effects may be due to the glutaraldehyde crosslinking process used in the preparation of the materials. A number of studies have focused on strategies to control calcification, while others have concentrated on the prevention of micro-thrombus formation. In the present work, we have introduced amino-terminated poly(ethylene glycol) (NH2-PEG-NH2) as an intermolecular bridge, which not only eliminates free aldehyde groups to prevent calcification, but also introduces sites for the attachment of anticoagulant molecules. Furthermore, PEG, itself a hydrophilic polymer with good biocompatibility, may effectively prevent protein adsorption in the early stages of blood contact leading to thrombus formation. After further covalent attachment of heparin, modified bovine pericardium (BP) showed strong anti-calcification (calcium content: 39.3 ± 3.1 µg mg-1) and anti-coagulation properties (partial thromboplastin time: >300 s). The biocompatibility and mechanical properties, important for clinical use, were also improved by modification. The strategy used in this work includes new ideas and technologies for the improvement of valve products used in the clinic.

Protective effect of soy isolate protein against streptozotocin induced gestational diabetes mellitus via TLR4/MyD88/NF-κB signaling pathway.

BACKGROUND: Gestational diabetes mellitus (GDM) is a serious complication of pregnancy that is characterized by high blood sugar levels that occur due to insulin resistance and dysfunction in glucose metabolism during pregnancy. It usually develops in the second or third trimester of pregnancy and affects about 7 % of all pregnancies worldwide. In this experimental study, we scrutinized the GDM protective effect of soy isolate protein against streptozotocin (STZ) induced GDM in rats and explore the underlying mechanism. MATERIAL AND METHODS: Sprague-Dawley (SD) rats were used in this experimental study. A 55 mg/kg intraperitoneal injection of streptozotocin (STZ) was administered to induce diabetes in female rats, followed by oral administration of soy isolate protein for 18 days. Body weight, glucose levels, and insulin were measured at different time intervals (0, 9, and 18 days). Lipid profiles, antioxidant levels, inflammatory cytokines, apoptosis parameters, and mRNA expression were also assessed. Pancreatic and liver tissues were collected for histopathological examination during the experimental study. RESULTS: Soy isolate protein significantly (P < 0.001) reduced the glucose level and enhanced the insulin level and body weight. Soy isolate protein remarkably decreased the placental weight and increased the fetal weight. Soy isolate protein significantly (P < 0.001) decreased the HbA1c, hepatic glycogen, serum C-peptide and increased the level of free fatty acid. Soy isolate protein significantly (P < 0.001) altered the level of lipid, antioxidant and inflammatory cytokines. Soy isolate protein significantly (P < 0.001) improved the level of adiponectin, visfatin and suppressed the level of leptin and ICAM-1. Soy isolate protein significantly (P < 0.001) altered the mRNA expression and also restored the alteration of histopathology. CONCLUSION: Based on the result, soy isolate protein exhibited the GDM protective effect against the STZ induced GDM in rats via alteration of TLR4/MyD88/NF-κB signaling pathway.

Regulating cell behavior via regional patterned distribution of heparin-like polymers.

Molecular patterning on biomaterial surfaces is an effective strategy to regulate biomaterial properties. Among the specific molecules, due to their biological functions, such as regulating cell behavior, heparin-like polymers (HLPs) have attracted much attention. In this study, HLP-distributed regional patterned surfaces (300 µm diameter circular array) were prepared by the combination of visible light-induced graft polymerization, transfer imprinting, and self-assembly to regulate the behavior of human umbilical vein endothelial cells (HUVECs) and human umbilical vein smooth muscle cells (HUVSMCs). The introduction of the regional pattern on HLP-modified surfaces enhanced the promotion effect of sulfonate-containing polymer (pSS) and sulfonate-, and glyco-containing copolymer (pS-co-pM), and slightly weakened the inhibition effect of glyco-containing polymer (pMAG) on the growth of HUVECs and HUVSMCs. Compared with flat surfaces, it was found that the unmodified regional patterned surfaces inhibit the spreading of HUVECs and HUVSMCs, while significantly promoting the spreading of HUVECs and HUVSMCs on all the HLP-distributed regional patterned surfaces. The patterned surface modified with pS-co-pM had the highest average spread area of HUVECs (∼10,554 µm2), which was 193 % higher than that of the unmodified flat surface. This trend was somewhat related to surface VEGF adsorption. The combination of regional divisive patterns and different HLP distributions enriched the potential of further exploring the influences of HLP chemical distributions and complex surface environments on cell-material interactions.

Development of a Mixed Multinuclear Cluster Strategy in Metal-Organic Frameworks for Methane Purification and Storage.

Metal-organic frameworks (MOFs) have attracted extensive attention in methane (CH4) purification and storage. Specially, multinuclear cluster-based MOFs usually have prominent performance because of large cluster size and abundant open metal sites. However, compared to diverse combinations of organic linkers, one MOF with two or more multinuclear clusters is difficult to achieve. In this paper, we demonstrate a mixed multinuclear cluster strategy, which successfully led to three new heterometallic MOFs (SNNU-328-330) with the same common H3TATB [2,4,6-tris(4-carboxyphenyl)-1,3,5-triazine] tritopic linker and six types of multinuclear clusters ([YCd(COO)4(µ2-H2O)], [YCd2(COO)8], [In3(COO)6(µ3-OH)], [In3Eu2(COO)9(µ3-OH)3(µ4-O)], [Y9(COO)12(µ3-OH)14] and [Y2Cd8(COO)16(µ2-H2O)4(µ3-OH)8]). Three MOF adsorbents all show great potentials to remove the impurities (CO2 and C2-hydrocarbons) in natural gas and show prominent high-pressure methane storage capacity. Among them, the ideal adsorbed solution theory separation ratios of equimolar C2H2/CH4, C2H4/CH4, C2H6/CH4, and CO2/CH4 at 298 K for SNNU-328 reach to 29.7-16.0, 19.1-8.2, 33.2-10.3, and 74.3-8.5, which have surpassed many famous MOF adsorbents. Dynamic breakthrough experiments conducted at 273 and 298 K showed that SNNU-330 can separate CH4 from C2H2/CH4, C2H4/CH4, C2H6/CH4, and CO2/CH4 mixtures with the breakthrough interval times of about 48.2, 17.9, 37.2, and 17.1 min g-1 (273 K, 1 bar, v/v = 50/50, 2 mL min-1), respectively. Remarkably, SNNU-329 exhibits extremely high methane storage performance at 298 K with the total uptake and working capacity of 192 cm3 cm-3 (95 bar) and 171 cm3 cm-3 (65 bar) due to the synergistic effects of high surface area, suitable pore sizes, and multiple open metal sites.

Effect of Structural Elements of Heparin-Mimicking Polymers on Vascular Cell Distribution and Functions: Chemically Homogeneous or Heterogeneous?

Heparin-mimicking polymers (HMPs) are artificially synthesized alternatives to heparin with comparable regulatory effects on protein adsorption and cell behavior. By introducing two major structural elements of HMPs (sulfonate- and glyco-containing units) to different areas of material surfaces, heterogeneous surfaces patterned with different HMPs and homogeneous surfaces patterned with the same HMPs can be obtained. In this work, heterogeneous HMP-patterned poly(dimethylsiloxane) (PDMS) surfaces with sulfonate-containing polySS (pS) and glyco-containing polyMAG (pM) distributed in circular patterns (with a diameter of 300 µm) were prepared (S-M and M-S). Specifically, pS and pM were distributed inside and outside the circles on S-M, respectively, and exchanged their distribution on M-S. Homogeneous HMP-patterned silicone surfaces (SM-SM) where sulfonate- and glyco-containing poly(SS-co-MAG) (pSM) were distributed uniformly were prepared. Vascular cells showed interestingly different behaviors between chemically homogeneous and heterogeneous surfaces. They tended to grow in the sulfonate-modified area on S-M and M-S and were distributed uniformly on SM-SM. Compared with M-S, S-M showed a better promoting effect on the growth of vascular cells. Among all the samples, SM-SM exhibited the highest proliferation density and an optimum spreading state of vascular cells, as well as the highest human umbilical vein endothelial cell (HUVEC) viability (∼99%) and relatively low human umbilical vein smooth muscle cell (HUVSMC) viability (∼72%). By heterogeneous or homogeneous patterning with different structural elements of HMPs, the modified silicone surfaces spatially guided vascular cell distribution and functions. This strategy provides a new surface engineering approach to the study of cell-HMP interactions.

Auricularia auricular Adsorbs Aflatoxin B1 and Ameliorates Aflatoxin B1-Induced Liver Damage in Sprague Dawley Rats.

Aflatoxin B1 (AFB1), as a class I carcinogen, poses a substantial health risk to individuals. Contamination of food sources, particularly grains and nuts, with Aspergillus flavus (A. flavus) contributes to the prevalence of AFB1. The impact of global warming has spurred research into the development of AFB1 prevention technologies. While edible fungi have shown potential in detoxifying AFB1, there is a scarcity of literature on the application of Auricularia auricular (A. auricular) in this context. This study aimed to investigate the ability and underlying mechanism of A. auricular mycelia to adsorb aflatoxin B1, as well as evaluate its protective effects on the AFB1-induced liver damage in SD rats. Additionally, the effects of temperature, time, pH, and reaction ratio on the adsorption rate were examined. Combining thermodynamic and kinetic data, the adsorption process was characterized as a complex mechanism primarily driven by chemical adsorption. In SD rats, the A. auricular mycelia exhibited alleviation of AFB1-induced liver damage. The protective effects on the liver attributed to A. auricular mycelia may involve a reduction in AFB1 adsorption in the intestine, mitigation of oxidative stress, and augmentation of second-phase detoxification enzyme activity. The adsorption method for AFB1 not only ensures safety and non-toxicity, but also represents a dietary regulation strategy for achieving effective defense against AFB1.

PERK/ATF3-Reduced ER Stress on high potassium environment in the suppression of tumor ferroptosis.

Potassium (K+) is a vital intracellular cation. In the human body, it regulates membrane potential, electrical excitation, protein synthesis, and cell death. Recent studies revealed that dying cancer cells release potassium into the tumor microenvironment (TME), thereby influencing cell survival-related events. Several investigations reported that potassium channels and high potassium levels influence apoptosis. Increasing extracellular potassium and inhibiting K+ efflux channels significantly block the apoptotic machinery. However, it is unknown whether a high-potassium environment also affects other types of cell death such as ferroptosis. In the present study, cell counting kit (CCK-8), colony formation ability, and 5-ethynyl-2'-deoxyuridine (EdU) assays demonstrated that a high-potassium environment reverses erastin-induced ferroptosis. RNA sequencing (RNA-Seq) and Kyoto Encyclopedia of Genes and Genomes (KEGG) and gene ontology (GO) analyses indicated that high potassium levels attenuated the unfolded protein response that is characteristic of endoplasmic reticulum (ER) stress. The ER transmembrane proteins PRKR-like ER kinase (PERK), inositol-requiring enzyme 1α (IRE1α), and activating transcription factor 6 (ATF6) are recognized as ER stress sensors. Here, the PERK blocker GSK2606414 significantly rescued ferroptosis. The present work also disclosed that the ER-related gene activating transcription factor 3 (ATF3) played a vital role in regulating ferroptosis in a high-potassium environment. The foregoing results revealed the roles of potassium and the TME in cancer cell ferroptosis and provided a potential clinical therapeutic strategy for cancer.

A Phase III Clinical Trial Evaluating the Efficacy of Yinghua Tablet in the Treatment of Sequelae of Pelvic Inflammatory Disease.

Objective: To evaluate the efficacy and safety of the Yinghua tablet in treating sequelae of pelvic inflammatory diseases (PID) that manifest as the syndrome of dampness-heat stasis. Methods: The experimental group enrolled 360 cases, while the control group enrolled 120 cases. The experimental group took Yinghua tablets three times a day, three tablets each time, and the control group took Fuyankang tablets three times a day, three tablets each time. The treatment course was six weeks. Before treatment, at three weeks and six weeks of treatment, the patients were scored for TCM syndrome, clinical symptoms and, signs, and adverse events during treatment were recorded. Results: The experimental group included 340 cases, and the control group finally included 114 cases. After six weeks of treatment, statistically significant differences were observed between the two groups in the treatment effect, recovery rate, markedly effective rate, and total effective rate (P < .05). The two groups had no significant difference in the effective rate of local signs (P > .05). However, the two groups had a significant difference in the total effective rate (P < .05). Before and after treatment, traditional Chinese medicine (TCM) symptoms score, symptom sign score, and local sign score were statistically significant (P < .05). The incidence of adverse events (AEs) after taking Yinghua Tablets was 3.61% (13 times), of which the incidence of adverse events related to study drugs was 0.28% (1 case). The AEs of Fuyankang Tablets were 1.67% (2 times), of which the incidence of adverse events related to study drugs was 1.67% (2 cases). There was no significant difference in the incidence of AEs between the two groups as compared to Fisher (P = .3767), indicating that no serious AEs occurred in either group. Conclusions: Yinghua tablet was effective and safe in treating sequelae of pelvic inflammatory diseases.

High-Performance Turn-On Fluorescent Metal-Organic Framework for Detecting Trace Water in Organic Solvents Based on the Excited-State Intramolecular Proton Transfer Mechanism.

Simple, fast, and sensitive detection of trace water in organic solvents is an urgent requirement for chemical industries. Herein, combining the unusual excited-state intramolecular proton transfer (ESIPT) mechanism with the effective strategy of pore space partition, for the first time, we construct a powerful fluorescent metal-organic framework (SNNU-301) probe with excellent water stability. The SNNU-301 probe shows a remarkable performance for turn-on ESIPT-based fluorescence response to water in nine common organic solvents, exhibiting wide linear ranges, low limit of detection values, and ultrafast response, especially in dimethyl sulfoxide (0-5.2%; 0.011%, v/v; 110 s). The typical ESIPT-sensitive linker 2,5-dihydroxyterephthalate (DHBDC) imparts it with discriminative detection properties via enol-keto tautomerism, and light-responsive triangular tri(pyridin-4-yl)-amine (TPA) realizes pore space partition. The theoretical calculation gives an in-depth explanation about the proton transfer mechanism. Comparative experiments and GCMC simulation provide evidence that the synergy of the ESIPT process and TPA of the framework further boosts its performance effectively. Definitely, this work not only offers a promising candidate with fast detection speed, high sensitivity, excellent universality, and visual observation for the determination of water in organic solvents but also provides valuable guidance for the design of high-performance fluorescent probes.

Molecular 'email': Electrochemical aptasensing of fish pathogens, molecular information encoding, encryption and hiding applications.

DNA with data encoding and molecular recognition is rarely used in combination with electrochemistry for multipurpose integrated applications (especially in sensing, information communication and security). Herein, we demonstrated an electrochemical aptasensing, information communication and safety system for detection of fish pathogens (Aeromonas hydrophila or Edwardsiella tarda) and molecular information encryption and hiding. Two fish pathogens can be easily and quickly detected by electrochemistry, respectively, with high selectivity and sensitivity (detection limit lower than 1 cfu/mL) without the need for traditional time-consuming biochemical culturing process. The specific interaction of the probe (DNA aptamer) with targets (pathogens) on the tiny and imperceptible electrochemical platform provides protection for hiding DNA aptamers containing the encoded message, but also offers a foundation for developing of molecular cryptography and steganography. This electrochemical system, which is similar to mail communication, does not record information on paper, but a molecular mail that records information through DNA and reads information using electrochemical sensing, or more precisely, molecular electrochemical mail (namely molecular 'email'). Our study proved that the combination of the recognition and encoding capabilities of DNA aptamers with electrochemistry can open a new door for molecular-level digitization technology. In the future, large-capacity, easy-to-operate, resettable, and flexible molecular crypto-steganography will be developed for molecular cascade communication and control.

Vascular cell behavior on glycocalyx-mimetic surfaces: Simultaneous mimicking of the chemical composition and topographical structure of the vascular endothelial glycocalyx.

The endothelial glycocalyx is a carbohydrate-rich layer overlying the outermost surface of endothelial cells. It mediates intercellular interactions by specific chemical compositions (e.g., proteoglycans containing glycosaminoglycan (GAG) side chains) and micro/nanotopography. Inspired by the endothelial glycocalyx, we fabricated a series of glycocalyx-mimetic surfaces with tunable chemical compositions (GAG-like polymers with different functional units) and topographical structures (micro/nanopatterns with pillars different in size). The combination of micro/nanopatterns and GAG-like polymers was flexibly and precisely controlled by replica molding using silicon templates (Si templates) and visible light-initiated polymerization. Human umbilical vein endothelial cells (HUVECs) and human umbilical vein smooth muscle cells (HUVSMCs) were suppressed on surfaces modified with polymers of 2-methacrylamido glucopyranose (MAG) but promoted on surfaces modified with polymers of sodium 4-vinyl-benzenesulfonate (SS) and copolymers of SS and MAG. Surface micro/nanopatterns showed highly complicated effects on surfaces grafted with different GAG-like polymers. Moreover, the spread of HUVSMCs was highly promoted on all flat/patterned surfaces containing sulfonate units, and the elongation effect was stronger on surfaces with smaller pillars. On all the flat/patterned surfaces modified with GAG-like polymers, the adsorption of human vascular endothelial growth factor (VEGF) and human basic fibroblast growth factor (bFGF) was improved, and the amount of VEGF and bFGF absorbed on patterned surfaces containing sulfonate units decreased with pattern dimensions. The decreasing trend of VEGF and bFGF adsorption was in accordance with HUVEC density, suggesting that glycocalyx-mimetic surfaces influence the adsorption of VEGF and bFGF and further influence the growth behavior of vascular cells.

A New Molecular Recognition Concept: Multiple Hydrogen Bonds and Their Optically Triggered Proton Transfer in Confined Metal-Organic Frameworks for Superior Sensing Element.

We report a new sensing mechanism based on an indium-dihydroxyterephthalic acid metal-organic framework (MOF, SNNU-153), in which the spatially fitted analyte-MOF hydrogen-bond (H-bond) formation provides selective recognition while the analyte-H-bond assisted excited-state intramolecular proton transfer (ESIPT) and the resulting ratiometric emission act as a superior signal transducer with ultrafast response. The synergy of ESIPT signal transduction and confined MOF pore enables the SNNU-153 sensor selectively sensing hydrazine even among nitrogen-containing hydride analogs such as NH3, NH2OH, and (Me)2NNH2. The key of H-bond and associated ESIPT was further counter evidenced by an indium-2,5-dimethoxyterephthalic acid MOF (SNNU-152), where the hydroxyl protons were removed by methylation, showing near inertness to N2H4. The new molecular recognition concept thus makes SNNU-153 a powerful N2H4 sensor, which should be far-reaching to other sensing elements.

Accurate assembly of ferrocene-functionalized {Ti22Fc4} clusters with photocatalytic amine oxidation activity.

We report here the synthesis of a ferrocene-functionalized {Ti22Fc4} cluster with a 'dimer-of-clusters' topology, which represents the largest Ti-oxo cluster (TOC) modified with organometallic groups ever reported. The exact assembly path of {Ti22Fc4} can be inferred from its two substructures, {Ti11Fc2} and {Ti5Fc}, which can also be synthesized independently through subtle changes in reaction conditions. Furthermore, we used these clusters as photocatalysts, and have studied, for the first time, the photocatalytic activity of TOCs in the oxidative coupling of amines.

Monocarboxylate-driven structural growth in Calix[n]arene-polyoxotitanate hybrid systems: utility in hydrogen production from water.

A carboxylate-driven assembly strategy has been developed for the first time to build calix[n]arene-based polyoxotitanate clusters with tuneable nuclearity and structures. Photocatalytic studies revealed that these clusters exhibit structural-dependent H2 evolution ability with a maximum rate up to 415.11 µmol h-1 g-1, which is almost the highest recorded in polyoxotitanate clusters.

Synthesis and structure of a family of rhodium polystannide clusters [Rh@Sn10]3-, [Rh@Sn12]3-, [Rh2@Sn17]6- and the first triply-fused stannide, [Rh3@Sn24]5.

Through relatively subtle changes in reaction conditions, we have been able to isolate four distinct Rh/Sn cluster compounds, [Rh@Sn10]3-, [Rh@Sn12]3-, [Rh2@Sn17]6- and [Rh3@Sn24]5-, from the reaction of K4Sn9 with [(COE)2Rh(µ-Cl)]2(COE = cyclooctene). The last of these has a hitherto unknown molecular topology, an edge-fused polyhedron containing three Rh@Sn10 subunits, and represents the largest endohedral Group 14 Zintl cluster yet to have been isolated from solution. DFT has been used to place these new species in the context of known cluster chemistry. ESI-MS experiments on the reaction mixtures reveal the ubiquitous presence of {RhSn8} fragments that may play a role in cluster growth.

Synthesis, Crystal Structures, and Photochemical Properties of a Family of Heterometallic Titanium Oxo Clusters.

The incorporation of heterometallic atoms into the structure of titanium-oxygen nanomaterials is one of the known and effective strategies to develop new high-performance photovoltaic active materials. In this study, we have synthesized three benzoic acid-stabilized heterometallic titanium oxo clusters with the different transition metals Co, Cu, and Cd, formulated as [Ti4Co2(µ2-O)2(µ3-O)2(C6H5COO)12(CH3CN)2]·2CH3CN (1), [Ti5Cu4(µ3-O)6(C6H5COO)16] (2), and [Ti12Cd5(µ2-O)(µ3-O)15(µ4-O)2(C6H5COO)22(C6H5COOH)(CH3CN)]·CH3CN·C6H5COOH (3), and then we characterized their structures. UV-vis spectroscopy analysis revealed an enhanced UV-vis-light absorption of those heterometallic clusters. The density functional theory calculations indicated that charge transfer occurs from the p orbital of O atoms to the d orbital of Ti atoms in the TiO core (O → Ti) as well as from the metal to the core in 1 and 2. We also measured the photocurrent response and photocatalytic H2 evolution, which shows enhancement in the photocurrent intensity and good H2 evolution ability because of the cooperative effect of heterometal doping in titanium oxo clusters.