Multi-Sensor Origami Platform: A Customizable System for Obtaining Spatiotemporally Precise Functional Readouts in 3D Models.

Bioprinting technology offers unprecedented opportunities to construct in vitro tissue models that recapitulate the 3D morphology and functionality of native tissue. Yet, it remains difficult to obtain adequate functional readouts from such models. In particular, it is challenging to position sensors in desired locations within pre-fabricated 3D bioprinted structures. At the same time, bioprinting tissue directly onto a sensing device is not feasible due to interference with the printer head. As such, a multi-sensing platform inspired by origami that overcomes these challenges by "folding" around a separately fabricated 3D tissue structure is proposed, allowing for the insertion of electrodes into precise locations, which are custom-defined using computer-aided-design software. The multi-sensing origami platform (MSOP) can be connected to a commercial multi-electrode array (MEA) system for data-acquisition and processing. To demonstrate the platform, how integrated 3D MEA electrodes can record neuronal electrical activity in a 3D model of a neurovascular unit is shown. The MSOP also enables a microvascular endothelial network to be cultured separately and integrated with the 3D tissue structure. Accordingly, how impedance-based sensors in the platform can measure endothelial barrier function is shown. It is further demonstrated the device's versatility by using it to measure neuronal activity in brain organoids.

Super-Resolution-Chip: an in-vitro platform that enables super-resolution microscopy of co-cultures and 3D systems.

The development of organs-on-a-chip platforms has revolutionized in-vitro cellular culture by allowing cells to be grown in an environment that better mimics human physiology. However, there is still a challenge in integrating those platforms with advanced imaging technology. This is extremely important when we want to study molecular changes and subcellular processes on the level of a single molecule using super-resolution microscopy (SRM), which has a resolution beyond the diffraction limit of light. Currently, existing platforms that include SRM have certain limitations, either as they only support 2D monocultures, without flow or as they demand a lot of production and handling. In this study, we developed a Super-Res-Chip platform, consisting of a 3D-printed chip and a porous membrane, that could be used to co-culture cells in close proximity either in 2D or in 3D while allowing SRM on both sides of the membrane. To demonstrate the functionality of the device, we co-cultured in endothelial and epithelial cells and used direct stochastic optical reconstruction microscopy (dSTORM) to investigate how glioblastoma cells affect the expression of the gap-junction protein Connexin43 in endothelial cells grown in 2D and in 3D. Cluster analysis of Connexin43 distribution revealed no difference in the number of clusters, their size, or radii, but did identify differences in their density. Furthermore, the spatial resolution was high also when the cells were imaged through the membrane (20-30 nm for x-y) and 10-20 nm when imaged directly both for 2D and 3D conditions. Overall, this chip allows to characterize of complex cellular processes on a molecular scale in an easy manner and improved the capacity for imaging in a single molecule resolution complex cellular organization.

Brain-Targeted Liposomes Loaded with Monoclonal Antibodies Reduce Alpha-Synuclein Aggregation and Improve Behavioral Symptoms in Parkinson's Disease.

Monoclonal antibodies (mAbs) hold promise in treating Parkinson's disease (PD), although poor delivery to the brain hinders their therapeutic application. In the current study, it is demonstrated that brain-targeted liposomes (BTL) enhance the delivery of mAbs across the blood-brain-barrier (BBB) and into neurons, thereby allowing the intracellular and extracellular treatment of the PD brain. BTL are decorated with transferrin to improve brain targeting through overexpressed transferrin-receptors on the BBB during PD. BTL are loaded with SynO4, a mAb that inhibits alpha-synuclein (AS) aggregation, a pathological hallmark of PD. It is shown that 100-nm BTL cross human BBB models intact and are taken up by primary neurons. Within neurons, SynO4 is released from the nanoparticles and bound to its target, thereby reducing AS aggregation, and enhancing neuronal viability. In vivo, intravenous BTL administration results in a sevenfold increase in mAbs in brain cells, decreasing AS aggregation and neuroinflammation. Treatment with BTL also improve behavioral motor function and learning ability in mice, with a favorable safety profile. Accordingly, targeted nanotechnologies offer a valuable platform for drug delivery to treat brain neurodegeneration.

Inducing Mechanical Stimuli to Tissues Grown on a Magnetic Gel Allows Deconvoluting the Forces Leading to Traumatic Brain Injury.

Traumatic brain injury (TBI), which is characterized by damage to the brain resulting from a sudden traumatic event, is a major cause of death and disability worldwide. It has short- and long-term effects, including neuroinflammation, cognitive deficits, and depression. TBI consists of multiple steps that may sometimes have opposing effects or mechanisms, making it challenging to investigate and translate new knowledge into effective therapies. In order to better understand and address the underlying mechanisms of TBI, we have developed an in vitro platform that allows dynamic simulation of TBI conditions by applying external magnetic forces to induce acceleration and deceleration injury, which is often observed in human TBI. Endothelial and neuron-like cells were successfully grown on magnetic gels and applied to the platform. Both cell types showed an instant response to the TBI model, but the endothelial cells were able to recover quickly-in contrast to the neuron-like cells. In conclusion, the presented in vitro model mimics the mechanical processes of acceleration/deceleration injury involved in TBI and will be a valuable resource for further research on brain injury.

A Platform for Assessing Cellular Contractile Function Based on Magnetic Manipulation of Magnetoresponsive Hydrogel Films.

Despite significant advancements in in vitro cardiac modeling approaches, researchers still lack the capacity to obtain in vitro measurements of a key indicator of cardiac function: contractility, or stroke volume under specific loading conditions-defined as the pressures to which the heart is subjected prior to and during contraction. This work puts forward a platform that creates this capability, by providing a means of dynamically controlling loading conditions in vitro. This dynamic tissue loading platform consists of a thin magnetoresponsive hydrogel cantilever on which 2D engineered myocardial tissue is cultured. Exposing the cantilever to an external magnetic field-generated by positioning magnets at a controlled distance from the cantilever-causes the hydrogel film to stretch, creating tissue load. Next, cell contraction is induced through electrical stimulation, and the force of the contraction is recorded, by measuring the cantilever's deflection. Force-length-based measurements of contractility are then derived, comparable to clinical measurements. In an illustrative application, the platform is used to measure contractility both in untreated myocardial tissue and in tissue exposed to an inotropic agent. Clear differences are observed between conditions, suggesting that the proposed platform has significant potential to provide clinically relevant measurements of contractility.

Insight on Bacterial Newborn Meningitis Using a Neurovascular-Unit-on-a-Chip.

Understanding the pathogenesis of bacterial infections is critical for combatting them. For some infections, animal models are inadequate and functional genomic studies are not possible. One example is bacterial meningitis, a life-threatening infection with high mortality and morbidity. Here, we used the newly developed, physiologically relevant, organ-on-a-chip platform integrating the endothelium with neurons, closely mimicking in vivo conditions. Using high-magnification microscopy, permeability measurements, electrophysiological recordings, and immunofluorescence staining, we studied the dynamic by which the pathogens cross the blood-brain barrier and damage the neurons. Our work opens up possibilities for performing large-scale screens with bacterial mutant libraries for identifying the virulence genes involved in meningitis and determining the role of these genes, including various capsule types, in the infection process. These data are essential for understanding and therapy of bacterial meningitis. Moreover, our system offers possibilities for the study of additional infections-bacterial, fungal, and viral. IMPORTANCE The interactions of newborn meningitis (NBM) with the neurovascular unit are very complex and are hard to study. This work presents a new platform to study NBM in a system that enables monitoring of multicellular interactions and identifies processes that were not observed before.

Traumatic Brain Injury in a Well: A Modular Three-Dimensional Printed Tool for Inducing Traumatic Brain Injury In vitro.

Traumatic brain injury (TBI) is a major health problem that affects millions of persons worldwide every year among all age groups, mainly young children, and elderly persons. It is the leading cause of death for children under the age of 16 and is highly correlated with a variety of neuronal disorders, such as epilepsy, and neurodegenerative disease, such as Alzheimer's disease or amyotrophic lateral sclerosis. Over the past few decades, our comprehension of the molecular pathway of TBI has improved, yet despite being a major public health issue, there is currently no U.S. Food and Drug Administration-approved treatment for TBI, and a gap remains between these advances and their application to the clinical treatment of TBI. One of the major hurdles for pushing TBI research forward is the accessibility of TBI models and tools. Most of the TBI models require costume-made, complex, and expensive equipment, which often requires special knowledge to operate. In this study, we present a modular, three-dimensional printed TBI induction device, which induces, by the pulse of a pressure shock, a TBI-like injury on any standard cell-culture tool. Moreover, we demonstrate that our device can be used on multiple systems and cell types and can induce repetitive TBIs, which is very common in clinical TBI. Further, we demonstrate that our platform can recapitulate the hallmarks of TBI, which include cell death, decrease in neuronal functionality, axonal swelling (for neurons), and increase permeability (for endothelium). In addition, in view of the continued discussion on the need, benefits, and ethics of the use of animals in scientific research, this in vitro, high-throughput platform will make TBI research more accessible to other labs that prefer to avoid the use of animals yet are interested in this field. We believe that this will enable us to push the field forward and facilitate/accelerate the availability of novel treatments.

An automated high-throughput platform for experimental study of burn injuries - in vitro and ex vivo.

The use of in-vitro and ex-vivo models for the study of burn wound injuries is encouraged to reduce the animal burden in experimental burn research. However, few existing platforms enable the production of reproducible, locally confined thermal injuries at short durations in a high-throughput manner for both in-vitro and ex-vivo models. To address this gap, we established an automated high-throughput burn platform (HTBP) that provided accurate control over burn temperature, exposure time, and pressure application. This platform was built by fabricating an aluminum heat block with 96 pins and positioning a high-resolution actuator below the block. By activating the actuator, 96-well cell culture plates and skin samples were pressed against the heat block's pins. We demonstrated the applicability of the HTBP for studying in-vitro burn injuries by investigating the effects of burn temperature and contact duration on cell viability and migration in human umbilical vein endothelial cells and NIH-3T3 fibroblasts. We showed that higher temperatures and a longer contact duration decreased cellular viability and increased the area of the burn. Moreover, we found that even a short exposure time of 200 msec caused a severe burn wound at 75 °C in a cell monolayer. In addition, we used the HTBP to generate burn injuries at different burn durations in ex-vivo porcine skin and showed that dermis discoloration was present in histologic sections after exposure to 100 °C for a short duration of 500 msec. Our work demonstrates that the HTBP can constitute an important tool for both in-vitro and ex-vivo research of mild and severe burn injuries in a tightly controlled setting and high-throughput manner.

Spatial trans-epithelial electrical resistance (S-TEER) integrated in organs-on-chips.

Transepithelial/transendothelial electrical resistance (TEER) is a label-free assay that is commonly used to assess tissue barrier integrity. TEER measurement systems have been embedded in organ-on-a-chip devices to provide live readouts of barrier functionality. Yet, these systems commonly provide the impedance values which correspond to the highest level of permeability throughout the chip and cannot provide localized information on specific regions of interest. This work introduces a system that provides this essential information: a spatial-TEER (S-TEER) organ-on-a-chip platform, which incorporates moving (scanning) electrodes that can measure electrical resistance at any desired location along the chip. We demonstrate the system's capacity to obtain localized measurements of permeability in selected regions of a cell sample. We show how, in a layer with non-uniform levels of cell coverage, permeability is higher in areas with lower cell density-suggesting that the system can be used to monitor local cellular growth in vitro. To demonstrate the applicability of the chip in studies of barrier function, we characterize tissue response to TNF-α and to EGTA, agents known to harm tissue barrier integrity.

Effect of SARS-CoV-2 proteins on vascular permeability.

Severe acute respiratory syndrome (SARS)-CoV-2 infection leads to severe disease associated with cytokine storm, vascular dysfunction, coagulation, and progressive lung damage. It affects several vital organs, seemingly through a pathological effect on endothelial cells. The SARS-CoV-2 genome encodes 29 proteins, whose contribution to the disease manifestations, and especially endothelial complications, is unknown. We cloned and expressed 26 of these proteins in human cells and characterized the endothelial response to overexpression of each, individually. Whereas most proteins induced significant changes in endothelial permeability, nsp2, nsp5_c145a (catalytic dead mutant of nsp5), and nsp7 also reduced CD31, and increased von Willebrand factor expression and IL-6, suggesting endothelial dysfunction. Using propagation-based analysis of a protein-protein interaction (PPI) network, we predicted the endothelial proteins affected by the viral proteins that potentially mediate these effects. We further applied our PPI model to identify the role of each SARS-CoV-2 protein in other tissues affected by coronavirus disease (COVID-19). While validating the PPI network model, we found that the tight junction (TJ) proteins cadherin-5, ZO-1, and ß-catenin are affected by nsp2, nsp5_c145a, and nsp7 consistent with the model prediction. Overall, this work identifies the SARS-CoV-2 proteins that might be most detrimental in terms of endothelial dysfunction, thereby shedding light on vascular aspects of COVID-19.

Restoring Tactile Sensation Using a Triboelectric Nanogenerator.

Loss of tactile sensation is a common occurrence in patients with traumatic peripheral nerve injury or soft tissue loss, but as yet, solutions for restoring such sensation are limited. Implanted neuro-prosthetics are a promising direction for tactile sensory restoration, but available technologies have substantial shortcomings, including complexity of use and of production and the need for an external power supply. In this work, we propose, fabricate, and demonstrate the use of a triboelectric nanogenerator (TENG) as a relatively simple, self-powered, biocompatible, sensitive, and flexible device for restoring tactile sensation. This integrated tactile TENG (TENG-IT) device is implanted under the skin and translates tactile pressure into electrical potential, which it relays via cuff electrodes to healthy sensory nerves, thereby stimulating them, to mimic tactile sensation. We show that the device elicits electrical activity in sensory neurons in vitro, and that the extent of this activity is dependent on the level of tactile pressure applied to the device. We subsequently demonstrate the TENG-IT in vivo, showing that it provides tactile sensation capabilities (as measured by a von Frey test) to rats in which sensation in the hindfoot was blocked through transection of the distal tibial nerve. These findings point to the substantial potential of self-powered TENG-based implanted devices as a means of restoring tactile sensation.

Orchestrated regulation of iron trafficking proteins in the kidney during iron overload facilitates systemic iron retention.

The exact route of iron through the kidney and its regulation during iron overload are not completely elucidated. Under physiologic conditions, non-transferrin and transferrin bound iron passes the glomerular filter and is reabsorbed through kidney epithelial cells, so that hardly any iron is found in the urine. To study the route of iron reabsorption through the kidney, we analyzed the location and regulation of iron metabolism related proteins in kidneys of mice with iron overload, elicited by iron dextran injections. Transferrin Receptor 1 was decreased as expected, following iron overload. In contrast, the multi-ligand hetero-dimeric receptor-complex megalin/cubilin, which also mediates the internalization of transferrin, was highly up-regulated. Moreover, with increasing iron, intracellular ferritin distribution shifted in renal epithelium from an apical location to a punctate distribution throughout the epithelial cells. In addition, in contrast to many other tissues, the iron exporter ferroportin was not reduced by iron overload in the kidney. Iron accumulated mainly in interstitial macrophages, and more prominently in the medulla than in the cortex. This suggests that despite the reduction of Transferrin Receptor 1, alternative pathways may effectively mediate re-absorption of iron that cycles through the kidney during parenterally induced iron-overload. The most iron consuming process of the body, erythropoiesis, is regulated by the renal erythropoietin producing cells in kidney interstitium. We propose, that the efficient re-absorption of iron by the kidney, also during iron overload enables these cells to sense systemic iron and regulate its usage based on the systemic iron state.

A flexible polymersome system with tunable morphology and release profiles for efficient intracellular delivery.

Polymersomes are widely used as drug delivery system however they have shortcomings in drug-eluting properties that are attributable to the high molecular weight of the copolymers forming their membrane. Here we demonstrate for the first time how novel class of polymersomes from very short, liquid to soft star-shaped copolymers can be empowered to form an efficient drug delivery system. The copolymers undergo self-assembly in water into a stable, nano-sized rod or a spherical shape polymersomes. Increasing the Mw of the hydrophobic moieties the CMC value is decreased accompanied with the tendency to form a more spherical structure. The poorly water-soluble anticancer drug camptothecin was loaded into the fabricated polymersomes, resulting in a high drug loading content, and released over a period of over three days. Furthermore, this biocompatible system could deliver a variety of drugs intracellularly in a rapid yet controlled manner. Therefore, this nano system's tailorable properties, biocompatibility and ability to incorporate hydrophobic drugs and release them intracellularly are desirable traits for anti-cancer delivery system and other biomedical applications.

Compartmentalization and regulation of iron metabolism proteins protect male germ cells from iron overload.

The universal importance of iron, its high toxicity, and complex chemistry present a challenge to biological systems in general and to protected compartments in particular. The high mitotic rate and avid mitochondriogenesis of developing male germ cells imply high iron requirements. Yet access to germ cells is tightly regulated by the blood-testis barrier that protects the meiotic and postmeiotic germ cells. To elucidate how iron is supplied to developing male germ cells, we analyzed iron deposition and iron transport proteins in testes of mice with iron overload and with genetic ablation of the iron regulators Hfe and iron regulatory protein 2. Iron accumulated mainly around seminiferous tubules, and only small amounts localized within the seminiferous tubules. The localization and regulation of proteins involved in iron import, storage, and export such as transferrin, transferrin receptor, the divalent metal transporter-1, cytosolic ferritin, and ferroportin strongly support a model of a largely autonomous iron cycle within seminiferous tubules. We show evidence that ferritin secretion from Sertoli cells may play an important role in iron acquisition of primary spermatocytes. During spermatogenic development iron is carried along from primary spermatocytes to spermatids, and from spermatids iron is recycled to the apical compartment of Sertoli cells, which traffic it back to a new generation of spermatocytes. Losses are replenished by the peripheral circulation. Such an internal iron cycle essentially detaches the iron homeostasis within the seminiferous tubule from the periphery and protects developing germ cells from iron fluctuations. This model explains how compartmentalization can optimize cellular and systemic nutrient homeostasis.

Endoplasmic reticulum anchored heme-oxygenase 1 faces the cytosol.

Heme-oxygenase 1 is an endoplasmic reticulum-anchored enzyme that breaks down heme into iron, carbon monoxide and biliverdin. Heme is a hydrophobic co-factor in many proteins, including hemoglobin. Free heme is highly cytotoxic and, therefore, both heme synthesis and breakdown are tightly regulated. During turnover of heme proteins, heme is released in the phago-lysosomal compartment or the cytosol. The subcellular location of the heme-oxygenase 1 active site has not been clarified. Using constructs of heme-oxygenase 1 with fluorescent proteins, and the endogenous heme-oxygenase 1 in two variations of protease protection assays, we determined that heme-oxygenase 1 is membrane-bound and faces the cytosol in non-activated macrophages in vivo. These findings imply that in quiescent macrophages, heme breakdown products are generated in the cytosol. This facilitates iron recycling to ferroportin for iron export and to ferritin for iron storage.

Serum ferritin is derived primarily from macrophages through a nonclassical secretory pathway.

The serum ferritin concentration is a clinical parameter measured widely for the differential diagnosis of anemia. Its levels increase with elevations of tissue iron stores and with inflammation, but studies on cellular sources of serum ferritin as well as its subunit composition, degree of iron loading and glycosylation have given rise to conflicting results. To gain further understanding of serum ferritin, we have used traditional and modern methodologies to characterize mouse serum ferritin. We find that both splenic macrophages and proximal tubule cells of the kidney are possible cellular sources for serum ferritin and that serum ferritin is secreted by cells rather than being the product of a cytosolic leak from damaged cells. Mouse serum ferritin is composed mostly of L-subunits, whereas it contains few H-subunits and iron content is low. L-subunits of serum ferritin are frequently truncated at the C-terminus, giving rise to a characteristic 17-kD band that has been previously observed in lysosomal ferritin. Taken together with the fact that mouse serum ferritin is not detectably glycosylated, we propose that mouse serum ferritin is secreted through the nonclassical lysosomal secretory pathway.

Rapid methods for high-throughput detection of sulfoxides.

Enantiopure sulfoxides are prevalent in drugs and are useful chiral auxiliaries in organic synthesis. The biocatalytic enantioselective oxidation of prochiral sulfides is a direct and economical approach for the synthesis of optically pure sulfoxides. The selection of suitable biocatalysts requires rapid and reliable high-throughput screening methods. Here we present four different methods for detecting sulfoxides produced via whole-cell biocatalysis, three of which were exploited for high-throughput screening. Fluorescence detection based on the acid activation of omeprazole was utilized for high-throughput screening of mutant libraries of toluene monooxygenases, but no active variants have been discovered yet. The second method is based on the reduction of sulfoxides to sulfides, with the coupled release and measurement of iodine. The availability of solvent-resistant microtiter plates enabled us to modify the method to a high-throughput format. The third method, selective inhibition of horse liver alcohol dehydrogenase, was used to rapidly screen highly active and/or enantioselective variants at position V106 of toluene ortho-monooxygenase in a saturation mutagenesis library, using methyl-p-tolyl sulfide as the substrate. A success rate of 89% (i.e., 11% false positives) was obtained, and two new mutants were selected. The fourth method is based on the colorimetric detection of adrenochrome, a back-titration procedure which measures the concentration of the periodate-sensitive sulfide. Due to low sensitivity during whole-cell screening, this method was found to be useful only for determining the presence or absence of sulfoxide in the reaction. The methods described in the present work are simple and inexpensive and do not require special equipment.