Hydrothermal liquefaction of Nannochloropsis oceanica in different solvents.

Although the hydrothermal liquefaction is considered a promising technology for converting microalgae into liquid biofuels, there are still some disadvantages. This paper demonstrated that the bio-oil yield can be significantly improved by adding alcohols as co-solvents and carrying out the conversion at mild conditions (<250°C), but at the expense of a reduced bio-oil quality. By adding ethanol, the bio-oil yields obtained (up to ∼60%) were comparable to the yield obtained at severe operating conditions using only water as solvent (54±2% on average), but the quality of the bio-oil was lower. However, the main advantages of the process here described lie in the utilisation of wet microalgae (∼75% moisture) and alcohol concentrations which avoid both drying the microalgae and decreasing the amount of microalgae loaded in the reactor.

A novel pre-treatment for the methane production from microalgae by using N-methylmorpholine-N-oxide (NMMO).

The aim of this work was to study the effect of the solvent N-methylmorpholine-N-oxide (NMMO) to pre-treat Nannochloropsis oculata before the anaerobic digestion process. The results indicated that the pre-treatment affects the characteristics of the cell wall, which consequently becomes more susceptible to the microorganisms attack during anaerobic digestion. The methane production was increased by 43% after the pre-treatment, from 238±6mLCH4/gVS until 339±4mLCH4/gVS. On the contrary, the methane production from Chlorella vulgaris decreased after the pre-treatment from 251±4mLCH4/gVS to 231±3mLCH4/gVS. The failure on the pre-treatment was attributed to the particular characteristics of the substrate in consequence of a previous drying step.