Association between CACNA1D polymorphisms and hypospadias in a southern Chinese population.

BACKGROUND: Hypospadias is a congenital genitourinary malformation, with the etiology remaining complex and poorly understood. Despite several genes have been identified to be associated with the risk of hypospadias, current understanding of the susceptibility loci for hypospadias yet remained largely improved. The CACNA1D gene encodes calcium voltage-gated channel subunit alpha 1d and may be involved in androgen signaling. However, the genetic susceptibility of CACNA1D associated with hypospadias has yet been addressed. OBJECTIVE: To evaluate the association between CACNA1D polymorphisms and the susceptibility to hypospadias. METHODS: In this study, we accessed the association between two potential regulatory SNPs (rs3774491 and rs898415) within CACNA1D and hypospadias in a cohort of southern Chinese population which comprised of 740 cases and 948 healthy individuals. Both SNP and haplotypic associations were evaluated. Bioinformatic analysis of the regulatory abilities of the CACNA1D SNPs were carried out by utilizing public ChIP-seq and DNase-seq data. The expression of Cacna1d in mouse external genitalia and testis was evaluated by qPCR. RESULTS: We found that the allele C in rs3774491 and allele G in rs898415 were significantly associated with an increased risk of hypospadias, especially for proximal hypospadias. Further model-based genotypic analyses showed that these association were prominent in additive model and recessive models. Bioinformatic analyses indicated that both SNPs were colocalized with DNase and multiple histone marker across multiple tissues, suggesting the regulatory potentials for these variants. Cacna1d is detectable in both testis and external genitalia of mouse, but the expression level was more prominent in testis than that in external genitalia, suggesting tissue-specific differences in its expression. CONCLUSION: Our findings provide evidence for CACNA1D as a novel predisposing gene for hypospadias, shedding new light on the genetic basis of malformation of urinary tract. Further investigations are warranted to elucidate the functional implication of CACNA1D underlying the development of hypospadias. LEVEL OF EVIDENCE: N/A.

R13 preserves motor performance in SOD1G93A mice by improving mitochondrial function.

Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disease characterized by death of motor neurons in the brain and spinal cord. However, so far, there is no effective treatment for ALS. Methods: In this study, R13, a prodrug of 7,8-dihydroxyflavone, selectively activating tyrosine kinase receptor B (TrkB) signaling pathway, was administered prophylactically to 40-day old SOD1G93A mice for 90 days. The motor performance was investigated by rotarod test, climbing-pole test, grip strength test and hanging endurance test. Afterwards, the spinal cord and medulla oblongata of 130-day old mice were harvested, and the proteomics revealed the effect of R13 on mouse protein expression profile. Astrocytes and microglial proliferation were assessed by immunohistochemical analysis. The number of motor neurons in the spinal cord is determined by Nissl staining. The effect of R13 on gastrocnemius morphology was assessed by HE staining. The effect of R13 on the survival rate was accomplished with worms stably expressing G93A SOD1. Results: Behavioral tests showed that R13 significantly attenuated abnormal motor performance of SOD1G93A mice. R13 reduced the advance of spinal motor neuron pathology and gastrocnemius muscle atrophy. The proliferation of microglia and astrocytes was reduced by R13 treatment. Mitochondriomics analysis revealed that R13 modified the mitochondrial protein expression profiles in the medulla oblongata and spinal cord of SOD1G93A mice, particularly promoting the expression of proteins related to oxidative phosphorylation (OXPHOS). Further study found that R13 activated AMPK/PGC-1α/Nrf1/Tfam, promoted mitochondrial biogenesis and ameliorated mitochondrial dysfunction. Lastly, R13 prolonged the survival rate of worms stably expressing G93A SOD1. Conclusions: These findings suggest oral R13 treatment slowed the advance of motor system disease in a reliable animal model of ALS, supporting that R13 might be useful for treating ALS.

Synthesis of N-alkyl and N-aryl isoquinolones and derivatives via Pd-catalysed C-H activation and cyclization reactions.

Relatively less expensive Pd-catalysed oxidative coupling reactions for the preparation of N-alkyl and N-aryl substituted isoquinolones and their derivatives have been developed. A broad reaction scope has been demonstrated. In addition, studies of the reaction additives and mechanistic insights, as well as KIE studies for a better understanding of the reaction pathway, have been discussed.

Chemical modification of carbon black by a simple non-liquid-phase approach.

Chemical modification is the most popular and efficacious approach to improve dispersion stability for commercial carbon blacks in organic media. Even though this method has been used successfully in liquid systems, there have been few reports of chemical modification of carbon black in non-liquid-phase systems. In the present work, a simple non-liquid-phase approach to preparing modified carbon black with high dispersibility and stability in polar organic media from an industrial carbon black, N220, is reported. The treatment was carried out in a rheology mixer by blending carbon black with a low-molecular-weight organic compound, 3,9-bis-(1,1-dimethyl-2[beta-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy]ethyl)-2,4,8,10-tetraoxaspiro[5,5]-undecane (AO-80), under proper conditions. The modified carbon black had a smaller particle size than the original carbon black, as proven by dynamic light scattering and transmission electron microscopy, and it could be dispersed facilely in acetone to form a stable suspension. Time-of-flight secondary ion mass spectroscopy was used to detect the chemical presence of AO-80 fragments on the surface of the modified carbon black and consequently the modification mechanism.

Self-assembly morphology effects on the crystallization of semicrystalline block copolymer thin film.

Self-assembly morphology effects on the crystalline behavior of asymmetric semicrystalline block copolymer polystyrene-block-poly(L-lactic acid) thin film were investigated. Firstly, a series of distinctive self-assembly aggregates, from spherical to ellipsoid and rhombic lamellar micelles (two different kinds of rhombic micelles, defined as rhomb 1 and rhomb 2) was prepared by means of promoting the solvent selectivity. Then, the effects of these self-assembly aggregates on crystallization at the early stage of film evolution were investigated by in situ hot stage atomic force microscopy. Heterogeneous nucleation initiated from the spherical micelles and dendrites with flat on crystals appeared with increasing temperature. At high temperature, protruding structures were observed due to the thickening of the flat-on crystals and finally more thermodynamically stable crystallization formed. Annealing the rhombic lamellar micelles resulted in different phenomena. Turtle-shell-like crystalline structure initiated from the periphery of the rhombic micelle 1 and spread over the whole film surface in the presence of mostly noncrystalline domain interior. Erosion and small hole appeared at the surface of the rhombic lamellar micelle 2; no crystallization like that in rhomb 1 occurred. It indicated that the chain-folding degree was different in these two micelles, which resulted in different annealing behaviors.

Transformation from ordered islands to holes in phase-separating P2VP/PS blend films by adding Triton X-100.

Our previous investigation showed that the ordered hexagonal island pattern in the phase-separating polymeric blend films of polystyrene and poly(2-vinylpyridine) (PS/P2VP) formed due to the convection effect by proper control of PS molecular weight, solvent evaporation rate, and the weight ratio of PS to P2VP. In this paper, we further illustrate that, by adding a proper amount of the surfactant Triton X-100 to the PS/P2VP toluene solution, the ordered hexagonal island pattern can be transformed to the ordered honeycomb pattern. The effects of the amount of Triton X-100 on the surface morphology evolution and the pattern transformation are discussed in terms of the collapse of Triton X-100, phase separation between Triton X-100/P2VP and PS, the interfacial interaction between Triton X-100/P2VP and the mica substrate, and the Bénard-Marangoni convection.

Dewetting of thin polystyrene films under confinement.

The dewetting behavior of thin polystyrene (PS) film has been investigated by placing an upper plate with a ca. 140 nm gap from the underlying substrate with the spin-coated thin polymer films. Three different kinds of dewetting behaviors of thin PS film have been observed after annealing according to the relative position of the PS film to the upper plate. Since the upper plate is smaller than the underlying substrate, a part of the polymer film is not covered by the plate. In this region (I), thin PS film dewetting occurs in a conventional manner, as previously reported. While in the region covered by the upper plate (III), the PS film exhibits unusual dewetted patterns. Meanwhile, in the area right under the edge of the plate (II) (i.e., the area between region I and region III), highly ordered arrays of PS droplets are formed. Formation mechanisms of different dewetted patterns are discussed in detail. This study may offer an effective way to improve the understanding of various dewetting behaviors and facilitate the ongoing exploration of utilizing dewetting as a patterning technique.

Morphologies in solvent-annealed thin films of symmetric diblock copolymer.

We have systematically studied the thin film morphologies of symmetric poly(styrene)-block-poly(methyl methacrylate) (PS-b-PMMA) diblock copolymer after annealing to solvents with varying selectivity. Upon neutral solvent vapor annealing, terraced morphology is observed without any lateral structures on the surfaces. When using PS-selective solvent annealing, the film exhibits macroscopically flat with a disordered micellar structure. While PMMA-selective solvent annealing leads to the dewetting of the film with fractal-like holes, with highly ordered nanoscale depressions in the region of undewetted films. In addition, when decreasing the swelling degree of the film in the case of PMMA-selective solvent annealing, hills and valleys are observed with the coexistence of highly ordered nanoscale spheres and stripes on the surface, in contrast to the case of higher swelling degree. The differences are explained qualitatively on the basis of polymer-solvent interaction parameters of the different components.

Polymer surfaces with reversibly switchable ordered morphology.

Honeycomb macroporous films fabricated by the "breath figures" method were composed of poly2-vinylpyridine (P2VP) distributed in the holes of polystyrene (PS). The porous films exhibited reversible behavior responding to water and different solvent vapors. When the porous film was treated with water, the honeycomb pattern would change to the hexagonal islandlike pattern. Once heated to remove the water, the honeycomb pattern emerged again. When the porous film was exposed to different solvent vapors, the same reversible process appeared. Carbon disulfide (CS(2)), toluene (TOL), and tetrahydrofuran (THF) solvent vapors induced the honeycomb pattern into the ordered islandlike pattern, and ethanol, chloroform, methyl ethyl ketone (MEK), and dimethylformamide (DMF) solvent vapors made the islandlike pattern come back to the honeycomb pattern. The hygroscopic property of P2VP and the polymer-solvent interaction are the driving force for the reversibly switchable morphology. The appropriate control of the hole depth is very crucial in determining the reversible changes.

Molecular motions of different scales at thin polystyrene film surface by lateral force microscopy.

Lateral force microscopy (LFM) was used to probe the molecular motions at thin polystyrene film surface. The effect of the applied load on the LFM measurements was investigated by presenting both the LFM results and the surface morphology after several scans over the same area. Depending on the loads, the scanning can be nonperturbative (without alternating the surface morphology) or perturbative (patterning the surface). Temperature-dependent LFM measurements were conducted in order to determine the apparent transitions at the surface. Perturbative scans under high loads (e.g., 150 nN) witnessed that the apparent transitions shifted to low temperatures with an increasing scan rate, while the transitions behaved oppositely under lower loads (1, 10, and 20 nN). The heating effect is suggested to account for the behavior under high loads. According to our results from nonperturbative LFM, the apparent glass transition temperature (T(g)s) is more than 10 K lower than the bulk value. Moreover, rate-dependent LFM measurements were performed under 1 nN in order to detect the surface molecular motions. Time-temperature superposition yields a master curve exhibiting three apparent relaxation peaks. The molecular motions at the surface are discussed on the context of the coupling model.

Controlling the size of nanostructures in thin films via blending of block copolymers and homopolymers.

The effects of molecular weight and concentration of poly (methyl methacrylate) (PMMA) homopolymer or symmetric short polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) diblock copolymer on the size of the nanostructures of its blends with symmetric long PS-b-PMMA diblock copolymer have been investigated by atomic force microscopy. By careful controlling of the film thickness, solvent selectivity, and annealing time, PMMA cylindrical microdomains oriented normal to the film surface were obtained in all thin films. With the addition of both low- and high-molecular-weight PMMA homopolymers, the cylindrical domain sizes increased although it was less obvious for the lower molecular weight homopolymer. In contrast to the homopolymer, adding the short chain diblock copolymer resulted in a decrease in the cylindrical domain size, which was ascribed to the reduction of the interfacial tension and increase in the stretching energy.

Solvent-induced microphase separation in diblock copolymer thin films with reversibly switchable morphology.

We have studied the surface morphology of symmetric poly(styrene)-block-poly(methyl methacrylate) diblock copolymer thin films after solvent vapor treatment selective for poly(methyl methacrylate). Highly ordered nanoscale depressions or striped morphologies are obtained by varying the solvent annealing time. The resulting nanostructured films turn out to be sensitive to the surrounding medium, that is, their morphologies and surface properties can be reversibly switchable upon exposure to different block-selective solvents.