Human IL12p80 Promotes Murine Oligodendrocyte Differentiation to Repair Nerve Injury.

Nerve injury of the central nervous system and the peripheral nervous system still poses a major challenge in modern clinics. Understanding the roles of neurotrophic factors and their molecular mechanisms on neuro-regeneration will not only benefit patients with neural damage but could potentially treat neurodegenerative disorders, such as amyotrophic lateral sclerosis. In this study, we showed that human IL12 p40-p40 homodimer (hIL12p80) within PLA and PLGA conduits improved sciatic nerve regeneration in mice. As such, the group of conduits with NSCs and hIL12p80 (CNI) showed the best recovery among the groups in the sciatic functional index (SFI), compound muscle action potential (CMAP), and Rotarod performance analyses. In addition, the CNI group had a faster recovery and outperformed the other groups in SFI and Rotarod performance tests beginning in the fourth week post-surgery. Immunohistochemistry showed that the CNI group increased the diameter of the newly regenerated nerve by two-fold (p < 0.01). In vitro studies showed that hIL12p80 stimulated differentiation of mouse NSCs to oligodendrocyte lineages through phosphorylation of Stat3 at Y705 and S727. Furthermore, implantation using PLGA conduits (C2.0 and C2.1) showed better recovery in the Rotarod test and CMAP than using PLA conduits in FVB mice. In B6 mice, the group with C2.1 + NSCs + hIL12p80 (C2.1NI) not only promoted sciatic functional recovery but also reduced the rate of experimental autotomy. These results suggested that hIL12p80, combined with NSCs, enhanced the functional recovery and accelerated the regeneration of damaged nerves in the sciatic nerve injury mice. Our findings could further shed light on IL12's application not only in damaged nerves but also in rectifying the oligodendrocytes' defects in neurodegenerative diseases, such as amyotrophic lateral sclerosis and multiple sclerosis.

Micropatterned topographies reveal measurable differences between cancer and benign cells.

During metastasis, cancer cells migrate away from the primary tumor-site, encountering different microenvironment topographies that may facilitate or inhibit cancer cell adherence and growth; those relate to sites of invasion and seeding. To evaluate topography effects, poly-lactic-poly-glycolic (PLGA) gels are generated as flat substrates, porous, or with rectangular microchannels of varying widths (5-100 µm) and depths (10/20 µm). The topography effect on time-dependent adherence, proliferation, morphology, alignment and long-term structural development of metastatic breast-cancer and benign cells are evaluated; adherence at short time-scales (3 h) is compared to developed morphologies and multicellular structures (>2 days) indicating function. At short time-scales, both cell types exhibit rounded morphologies, however, while the benign cells tend to cluster the cancer cells preferentially adhered as single cells at high-curvature substrate-sites (e.g. convex pore-edges or channel-edges). At long times, the benign cells develop extensive, tissue-like multicellular sheets spanning across several 10 µm deep channels or filling in single-file 20 µm-deep narrow channels (5-15 µm). Contrastingly, cancer cells mainly attach as single cells to high-curvature channel bottoms, in alignment with narrow channels. Thus, cell responses to topography, specifically their localization and growth in narrow microchannels, may provide a way to distinguish cancer from benign cells, by demonstrating their inherent function.

Flexible Photonic Crystal Material for Multiple Anticounterfeiting Applications.

In this study, a nanoimprinting method was introduced to fabricate polycarbonate films with transparent and flexible photonic crystal (FPC) structures. The fabricated flexible polymer films display a full-color grating because of the nanohemispherical structures on the surface. Through the Bragg diffraction formula, it was confirmed that the FPC polymer films transfer a part of the light energy to the second-order diffraction spectrum. Furthermore, the full-color grating properties can be modulated through geometric deformation because of the film's elasticity. Additionally, anticounterfeiting features were also successfully achieved when the polymer films were either engraved with drawings and bent or patterned with fluorophores, which can be revealed under ultraviolet light. The most important aspect of this research is that the preparation of this FPC-structured polymer film is inexpensive and convenient, enabling the mass production of a new generation of smart materials.

Optimization of micropatterned poly(lactic-co-glycolic acid) films for enhancing dorsal root ganglion cell orientation and extension.

Nerve conduits have been a viable alternative to the 'gold standard' autograft for treating small peripheral nerve gap injuries. However, they often produce inadequate functional recovery outcomes and are ineffective in large gap injuries. Ridge/groove surface micropatterning has been shown to promote neural cell orientation and guide growth. However, optimization of the ratio of ridge/groove parameters to promote orientation and extension for dorsal root ganglion (DRG) cells on poly(lactic-co-glycolic acid) (PLGA) films has not been previously conducted. Photolithography and micro-molding were used to define various combinations of ridge/groove dimensions on PLGA films. The DRG cells obtained from chicken embryos were cultured on micropatterned PLGA films for cell orientation and migration evaluation. Biodegradation of the films occurred during the test period, however, this did not cause deformation or distortion of the micropatterns. Results from the DRG cell orientation test suggest that when the ridge/groove ratio equals 1 (ridge/groove width parameters are equal, i.e., 10 µm/10 µm (even)), the degree of alignment depends on the size of the ridges and grooves, when the ratio is smaller than 1 (groove controlled) the alignment increases as the ridge size decreases, and when the ratio is larger than 1 (ridge controlled), the alignment is reduced as the width of the grooves decreases. The migration rate and neurite extension of DRG neurons were greatest on 10 µm/10 µm and 30 µm/30 µm micropatterned PLGA films. Based on the data, the 10 µm/10 µm and 30 µm/30 µm micropatterned PLGA films are the optimized ridge/groove surface patterns for the construction of nerve repair devices.

Control of cell proliferation by a porous chitosan scaffold with multiple releasing capabilities.

The aim of this study was to develop a porous chitosan scaffold with long-acting drug release as an artificial dressing to promote skin wound healing. The dressing was fabricated by pre-freezing at different temperatures (-20 and -80 °C) for different periods of time, followed by freeze-drying to form porous chitosan scaffolds with different pore sizes. The chitosan scaffolds were then used to investigate the effect of the controlled release of fibroblast growth factor-basic (bFGF) and transforming growth factor-ß1 (TGFß1) on mouse fibroblast cells (L929) and bovine carotid endothelial cells (BEC). The biocompatibility of the prepared chitosan scaffold was confirmed with WST-1 proliferation and viability assay, which demonstrated that the material is suitable for cell growth. The results of this study show that the pore sizes of the porous scaffolds prepared by freeze-drying can change depending on the pre-freezing temperature and time via the formation of ice crystals. In this study, the scaffolds with the largest pore size were found to be 153 ± 32 µm and scaffolds with the smallest pores to be 34 ± 9 µm. Through cell culture analysis, it was found that the concentration that increased proliferation of L929 cells for bFGF was 0.005 to 0.1 ng/mL, and the concentration for TGFß1 was 0.005 to 1 ng/mL. The cell culture of the chitosan scaffold and growth factors shows that 3.75 ng of bFGF in scaffolds with pore sizes of 153 ± 32 µm can promote L929 cell proliferation, while 400 pg of TGFß1 in scaffolds with pore size of 34 ± 9 µm can enhance the proliferation of L929 cells, but also inhibit BEC proliferation. It is proposed that the prepared chitosan scaffolds can form a multi-drug (bFGF and TGFß1) release dressing that has the ability to control wound healing via regulating the proliferation of different cell types.

Nerve guidance conduit with a hybrid structure of a PLGA microfibrous bundle wrapped in a micro/nanostructured membrane.

Nerve repair in tissue engineering involves the precise construction of a scaffold to guide nerve cell regeneration in the desired direction. However, improvements are needed to facilitate the cell migration/growth rate of nerves in the center of a nerve conduit. In this paper, we propose a nerve guidance conduit with a hybrid structure comprising a microfibrous poly(lactic-co-glycolic acid) (PLGA) bundle wrapped in a micro/nanostructured PLGA membrane. We applied sequential fabrication processes, including photolithography, nano-electroforming, and polydimethylsiloxane casting to manufacture master molds for the repeated production of the PLGA subelements. After demolding it from the master molds, we rolled the microfibrous membrane into a bundle and then wrapped it in the micro/nanostructured membrane to form a nerve-guiding conduit. We used KT98/F1B-GFP cells to estimate the migration rate and guidance ability of the fabricated nerve conduit and found that both elements increased the migration rate 1.6-fold compared with a flat PLGA membrane. We also found that 90% of the cells in the hybrid nano/microstructured membrane grew in the direction of the designed patterns. After 3 days of culturing, the interior of the nerve conduit was filled with cells, and the microfiber bundle was also surrounded by cells. Our conduit cell culture results also demonstrate that the proposed micro/nanohybrid and microfibrous structures can retain their shapes. The proposed hybrid-structured conduit demonstrates a high capability for guiding nerve cells and promoting cell migration, and, as such, is feasible for use in clinical applications.

An endothelial cultured condition medium embedded porous PLGA scaffold for the enhancement of mouse embryonic stem cell differentiation.

In this study, we have developed a microporous poly(lactic-co-glycolic acid) (PLGA) scaffold that combines a continuous release property and a three-dimensional (3D) scaffolding technique for the precise and efficient formation of endothelial cell lineage from embryonic stem cells (ESCs). Eight PLGA scaffolds (14.29%, 16.67%, 20% and 25% concentrations of PLGA solutions) mixed with two crystal sizes of sodium chloride (NaCl) were fabricated by leaching. Then, vascular endothelial cell conditioned medium (ECCM) mixed with gelatin was embedded into the scaffold for culturing of mouse embryonic stem cells (mESCs). The 14.29% PLGA scaffolds fabricated using non-ground NaCl particles (NG-PLGA) and the 25% PLGA containing scaffolds fabricated using ground NaCl particles (G-PLGA) possessed minimum and maximum moisture content and bovine serum albumin (BSA) content properties, respectively. These two groups of scaffolds were used for future experiments in this study. Cell culture results demonstrated that the proposed porous scaffolds without growth factors were sufficient to induce mouse ESCs to differentiate into endothelial-like cells in the early culture stages, and combined with embedded ECCM could provide a long-term inducing system for ESC differentiation.

Synthesis of antibacterial TiO2/PLGA composite biofilms.

This study developed a TiO2/PLGA [poly(lactic-co-glycolic acid)] composite biomaterial, which possesses antibacterial properties but is biocompatible, for artificial dressing applications. A sol-gel method was used for the preparation of the nano TiO2 powder with anatase phase. Several concentration ratios of TiO2 versus PLGA were analyzed to optimize the disinfection efficiency of the composite biomaterial. The antibacterial activity of the fabricated TiO2/PLGA composite was measured against Staphylococcus aureus and Escherichia coli. To evaluate the feasibility of the biomaterial on wound healing in vitro, human keratinocytes (HaCaTs), fibroblasts (L929s), and bovine carotid artery endothelial cells (BECs) were seeded on the TiO2/PLGA composite biofilms. To investigate the histological effect of the biocompatible biofilm in vivo, a rat subcutaneous implantation was performed. Our results show that TiO2/PLGA composite biofilms containing 10% TiO2 nanoparticles have an effective antibacterial property, a good survival rate on HaCaTs and L929s, and relative safe stability in tissue implantation. FROM THE CLINICAL EDITOR: This study reports the development of titanium dioxide-polylactic-co-glycolic acid composite biofilms, which possess antibacterial properties and are biocompatible for dressing applications, as demonstrated in a model system.

A material-independent cell-environment niche based on microreciprocating motion for cell growth enhancement.

In tissue engineering, cell-cell, cell-scaffold and cell-environment communication balances regulate how cell populations participate in tissue generation, maintenance and repair. These communication balances are called niches. In this study, an easily implemented and material-independent cell-environment niche based on microreciprocating motions is developed to enhance cell growth. A micropositioning piezoelectric lead zirconate titanate stage is used to provide precise microreciprocating shear stress motions. Various shear stresses were applied to bovine endothelial cells (BECs) that were cultured on the artificially synthesized materials to obtain the suitable shear stress for growth enhancement. It was found that the suitable shear stress for apparent enhancement of BEC growth ranges from 1.8 to 2.2 N m(-2). Biopolymers were further used to verify the feasibility of the proposed approach using the optimized shear stress obtained from the culture on artificially synthesized polymers. The results further confirmed that the growth of BECs was enhanced as expected under the calculated reciprocating frequencies based on the suitable shear stress. It is hoped that the proposed microshear-stress-based niche could be a more cost- and time-effective solution for the enhancement of cell growth in tissue engineering applications.

Hollow three-dimensional endothelialized microvessel networks based on femtosecond laser ablation.

In this study, a novel method for the fabrication of hollow three-dimensional (3D) poly(lactic-co-glycolic acid) (PLGA) microvessel scaffolds is proposed. In this novel fabrication method, a salt ingot, which was used as a temporary frame to define the shape of the desired scaffold, was fabricated by extrusion molding. The salt ingot was immersed in a PLGA solution and the PGLA enveloped the ingot entirely. The femtosecond laser ablation technique was used for ablating the desired pattern on the PLGA layer and then the salt ingot was completely dissolved in distilled deionized water. A hollow 3D PLGA scaffold was obtained using this process on which bovine endothelial cells (BECs) were then cultured. Scanning electron microscopy (SEM) and fluorescent images of the cell seeding demonstrate that the BECs adhered and grew well on both the side-wall of the branches and the surroundings of each branch.

The influence of different nanostructured scaffolds on fibroblast growth.

Skin serves as a protective barrier, modulating body temperature and waste discharge. It is therefore desirable to be able to repair any damage that occurs to the skin as soon as possible. In this study, we demonstrate a relatively easy and cost-effective method for the fabrication of nanostructured scaffolds, to shorten the time taken for a wound to heal. Various scaffolds consisting of nanohemisphere arrays of poly(lactic-co-glycolic acid) (PLGA), polylactide and chitosan were fabricated by casting using a nickel (Ni) replica mold. The Ni replica mold is electroformed using the highly ordered nanohemisphere array of the barrier-layer surface of an anodic aluminum oxide membrane as the template. Mouse fibroblast cells (L929s) were cultured on the nanostructured polymer scaffolds to investigate the effect of these different nanohemisphere arrays on cell proliferation. The concentration of collagen type I on each scaffold was then measured through enzyme-linked immunosorbent assay to find the most effective scaffold for shortening the wound-healing process. The experimental data indicate that the proliferation of L929 is superior when a nanostructured PLGA scaffold with a feature size of 118 nm is utilized.

Fabrication of pillared PLGA microvessel scaffold using femtosecond laser ablation.

One of the persistent challenges confronting tissue engineering is the lack of intrinsic microvessels for the transportation of nutrients and metabolites. An artificial microvascular system could be a feasible solution to this problem. In this study, the femtosecond laser ablation technique was implemented for the fabrication of pillared microvessel scaffolds of polylactic-co-glycolic acid (PLGA). This novel scaffold facilitates implementation of the conventional cell seeding process. The progress of cell growth can be observed in vitro by optical microscopy. The problems of becoming milky or completely opaque with the conventional PLGA scaffold after cell seeding can be resolved. In this study, PLGA microvessel scaffolds consisting of 47 µm × 80 µm pillared branches were produced. Results of cell culturing of bovine endothelial cells demonstrate that the cells adhere well and grow to surround each branch of the proposed pillared microvessel networks.

Fabrication of orderly nanostructured PLGA scaffolds using anodic aluminum oxide templates.

In this research, two simple fabrication methods to fabricate orderly nanostructured PLGA scaffolds using anodic aluminum oxide (AAO) template were conducted. In the vacuum air-extraction approach, the PLGA solution was cast on an AAO template first. The vacuum air-extraction process was then applied to suck the semi-congealed PLGA into the nanopores of the AAO template to form a bamboo sprouts array of PLGA. The surface roughness of the nanostructured scaffolds, ranging from 20 nm to 76 nm, can be controlled by the sucking time of the vacuum air-extraction process. In the replica molding approach, the PLGA solution was cast on the orderly scraggy barrier-layer surface of an AAO membrane to fabricate a PLGA scaffold of concave nanostructure. Cell culture experiments using the bovine endothelial cells (BEC) demonstrated that the nanostructured PLGA membrane can increase the cell growing rate, especially for the bamboo sprouts array scaffolds with smaller surface roughness.