RESUMEN
Bismuth-based compounds based on conversion-alloying reactions of multielectron transfer have attracted extensive attention as alternative anode candidates for rechargeable magnesium batteries (rMBs). However, the inadequate magnesium storage capability induced by the sluggish kinetics, poor reversibility, and terrible structural stability impedes their practical utilization. Herein, monodispersed Bi2S3 anchored on MXene has been prepared via a simple self-assembly strategy to induce the interfacial bonding of Ti-S and Ti-O-Bi. Unique superiority, including good electrical conductivity, high mechanical strength, and rapid charge transfer, is cleverly integrated together in the Bi2S3/MXene heterostructures, which endowed heterostructures with enhanced magnesium storage performance. Density functional theory calculations combined with kinetic behavior analyses confirm the favorable charge transfer and low ion diffusion barrier in hybrids. Furthermore, a stepwise insertion-conversion-alloying reaction mechanism is revealed in depth by ex situ investigations, which may also account for promoting performance. This work provides significant inspirations for constructing ingenious multicompositional hybrids by strong interfacial coupling engineering toward high-performance energy storage devices.
RESUMEN
Thrombosis and inflammation are primary contributors to the onset and progression of ischemic stroke. The contact-kinin pathway, initiated by plasma kallikrein (PK) and activated factor XII (FXIIa), functions bidirectionally with the coagulation and inflammation cascades, providing a novel target for therapeutic drug development in ischemic stroke. In this study, we identified a bat-derived oligopeptide from Myotis myotis (Borkhausen, 1797), designated LE6 (Leu-Ser-Glu-Glu-Pro-Glu, 702 Da), with considerable potential in stroke therapy due to its effects on the contact kinin pathway. Notably, LE6 demonstrated significant inhibitory effects on PK and FXIIa, with inhibition constants of 43.97 µmol/L and 6.37 µmol/L, respectively. In vitro analyses revealed that LE6 prolonged plasma recalcification time and activated partial thromboplastin time. In murine models, LE6 effectively inhibited carrageenan-induced mouse tail thrombosis, FeCl 3-induced carotid artery thrombosis, and photochemically induced intracerebral thrombosis. Furthermore, LE6 significantly decreased inflammation and stroke injury in transient middle cerebral artery occlusion models. Notably, the low toxicity, hemolytic activity, and bleeding risk of LE6, along with its synthetic simplicity, underscore its clinical applicability. In conclusion, as an inhibitor of FXIIa and PK, LE6 offers potential therapeutic benefits in stroke treatment by mitigating inflammation and preventing thrombus formation.
Asunto(s)
Oligopéptidos , Accidente Cerebrovascular , Animales , Ratones , Oligopéptidos/farmacología , Accidente Cerebrovascular/tratamiento farmacológico , Quirópteros , Trombosis , Inflamación , Masculino , Antiinflamatorios/farmacologíaRESUMEN
The accurate identification and monitoring of urban green space is of great significance in urban planning and ecological management. In view of the complex background of urban green space, the traditional remote sensing classification technology is prone to the problem of misalignment and adhesion. Taking Yuhua District of Changsha City as the research area and Gaofen-2 (GF-2) remote sensing image as the data source, we proposed a remote sensing classification method for urban green space based on the LA-UNet model, which was based on the UNet model. We introduced the DWTCA channel attention mechanism module to improve the attention of the network to green space information, and used the CARAFE module to up sample the extracted features to achieve accurate classification of trees, shrubs and other land types in the complex background of the city. The results showed that the LA-UNet model had the best classification effect of urban green space when using standard false color remote sensing images. The overall accuracy and mean intersection over union were 96.3% and 90.9%, which were 2.8% and 6.1% higher than the UNet model, respectively. In the Potsdam public dataset, the overall accuracy and mean intersection over union of the LA-UNet model were also better than those of the UNet model, which increased by 0.9% and 1.8%, respectively, indicating that the LA-UNet model had good robustness and versatility. In summary, the proposed LA-UNet model could effectively alleviate the problems of misalignment and adhesion of urban green space, with advantages in the remote sensing classification of urban green space. The improved LA-UNet model had a smaller parameter volume than the UNet model, which could effectively improve the classification accuracy of urban green space. This study would provide a methodological reference for the accurate classification and understanding the spatial distribution of urban green space.
Asunto(s)
Ciudades , Planificación de Ciudades , Ecosistema , Modelos Teóricos , Tecnología de Sensores Remotos , Tecnología de Sensores Remotos/métodos , China , Planificación de Ciudades/métodos , Monitoreo del Ambiente/métodos , Árboles/clasificación , Árboles/crecimiento & desarrollo , Conservación de los Recursos Naturales/métodosRESUMEN
Triply interlocked [2]catenane complexes featuring two identical, mechanically interlocked units are extraordinarily rare chemical compounds, whose properties and applications remain open to detailed studies. Herein, we introduce the rational design of a new ligand precursor, L1, suitable for the synthesis of six triply interlocked [2]catenanes by coordination-driven self-assembly. The interlocked compounds can be reversibly converted into the corresponding simple triangular prism metallacage by addition of H2O or DMF solvents to their CH3OH solutions, thereby demonstrating the importance of πâ â â π stacking and hydrogen bonding interactions in the formation of triply interlocked [2]catenanes. Moreover, extensive studies have been conducted to assess the remarkable photothermal conversion performance. Complex 6 a, exhibiting outstanding photothermal conversion performance (conversion efficiency in solution : 31.82 %), is used to prepare novel photoresponsive elastomer in combination with thermally activated liquid crystal elastomer. The resultant material displays robust response to near-infrared (NIR) laser and the capability of completely reforming the shape and reversible actuation, paving the way for the application of half-sandwich organometallic units in photo-responsive smart materials.
RESUMEN
The photocatalytic reduction of CO2 represents an environmentally friendly and sustainable approach for generating valuable chemicals. In this study, a thiophene-modified highly conjugated asymmetric covalent triazine framework (As-CTF-S) is developed for this purpose. Significantly, single-component intramolecular energy transfer can enhance the photogenerated charge separation, leading to the efficient conversion of CO2 to CO during photocatalysis. As a result, without the need for additional photosensitizers or organic sacrificial agents, As-CTF-S demonstrates the highest photocatalytic ability of 353.2 µmol g-1 and achieves a selectivity of ≈99.95% within a 4 h period under visible light irradiation. This study provides molecular insights into the rational control of charge transfer pathways for high-efficiency CO2 photoreduction using single-component organic semiconductor catalysts.
RESUMEN
Excellent electrocatalytic CO2 reduction reaction activity has been demonstrated by transition metals and nitrogen-codoped carbon (M-N-C) catalysts, especially for transition-metal porphyrin (MTPP)-based catalysts. In this work, we propose to use one-step low-temperature pyrolysis of the isostructural MTPP-based metal-organic frameworks (MOFs) and electrochemical in situ reduction strategies to obtain a series of hybrid catalysts of Co nanoparticles (Co NPs) and MTPP, named Co NPs/MTPP (M = Fe, Co, and Ni). The in situ introduction of Co NPs can efficiently enhance the electrocatalytic ability of MTPP (M = Fe, Co, and Ni) to convert CO2 to CO, particularly for FeTPP. Co NPs/FeTPP endowed a high CO faradaic efficiency (FECOmax = 95.5%) in the H cell, and the FECO > 90.0% is in the broad potential range of -0.72 to -1.22 VRHE. In addition, the Co NPs/FeTPP achieved 145.4 mA cm-2 at a lower potential of -0.70 VRHE with an FECO of 94.7%, and the CO partial currents increased quickly to reach 202.2 mA cm-2 at -0.80 VRHE with an FECO of 91.6% in the flow cell. It is confirmed that Co NPs are necessary for hybrid catalysts to get superior electrocatalytic activity; Co NPs also can accelerate H2O dissociation and boost the proton supply capacity to hasten the proton-coupled electron-transfer process, effectively adjusting the adsorption strength of the reaction intermediates.
RESUMEN
Stabilizing the Zn anode/electrolyte interface is critical for advancing aqueous zinc ion storage technologies. Addressing this challenge helps minimize parasitic reactions and controls the formation of Zn dendrites, which is fundamental to achieving highly reversible Zn electrochemistry. In this study, 2% by volume of dimethyl sulfoxide (DMSO) is introduced into the baseline zinc sulfate (ZS) electrolyte, which acts as an efficient regulator to form a robust solid-electrolyte interphase (SEI) on the Zn anode. This innovative approach enables uniform Zn deposition and does not substantially modify the Zn2+ solvation structure. The Zn||Zn symmetric cell exhibits an extended cycle life of nearly one calendar year (>8500 h) at a current density of 0.5 mA cm-2 and an areal capacity of 0.5 mAh cm-2. Impressive full cell performance can be achieved. Specifically, the Zn||VS2 full cell achieves an areal capacity of 1.7 mAh cm-2, with a superior negative-to-positive capacity ratio of 2.5, and an electrolyte-to-capacity ratio of 101.4 µL mAh-1, displaying remarkable stability over 1000 cycles under a high mass loading of 11.0 mg cm-2 without significant degradation. This innovative approach in electrolyte engineering provides a new perspective on in situ SEI design and furthers the understanding of Zn anode stabilization.
RESUMEN
Optimized fabrication of Z-scheme photocatalyst based on MOF materials offers sustainable energy generation and environmental improvement due to their attractive properties. The Z-scheme heterojunctions consisting of UiO-66 cubes covered with Zn0.5Cd0.5S nanoparticles were fabricated by a facile solvothermal method. Thanks to the Z-scheme carrier transport under simulated sunlight irradiation, UiO-66@Zn0.5Cd0.5S exhibited enhanced photocatalytic performance of H2 generation synchronized with organic pollutant degradation in fluoroquinolone antibiotic wastewater. Synergistically, the highest comprehensive performance was obtained in ciprofloxacin solution. The H2 yield reached 224 µmolâ g-1â h-1 and simultaneously the removal efficiency was up to 83.6 %. The degradation pathways revealed that the process of piperazine ring cleavage and decarboxylation also generates H protons, further promoting the production of H2. Therefore, the effective spatial separation and transfer of the photoinduced carriers are attributed to the good band structure, large specific surface area, and cooperative reduction and oxidation reactions of UiO-66@Zn0.5Cd0.5S, resulting in significant photocatalytic activity. The toxicity assessment of antibiotics and intermediate products during the photocatalytic reaction also verifies the reduction of environmental risk. This study highlights a promising way to expand the application of the MOFs-based photocatalyst in clean energy conversion coupling with water remediation.
RESUMEN
Electrolysis of water has emerged as a prominent area of research in recent years. As a promising catalyst support, copper foam is widely investigated for electrolytic water, yet the insufficient mechanical strength and corrosion resistance render it less suitable for harsh working conditions. To exploit high-performance catalyst supports, various metal supports are comprehensively evaluated, and Ti6Al4V (Ti64) support exhibited outstanding compression and corrosion resistance. With this in mind, a 3D porous Ti64 catalyst support is fabricated using the selective laser sintering (SLM) 3D printing technology, and a conductive layer of nickel (Ni) is coated to increase the electrical conductivity and facilitate the deposition of catalysts. Subsequently, Co0.8Ni0.2(CO3)0.5(OH)·0.11H2O (CoNiCH) nanoneedles are deposited. The resulting porous Ti64/Ni/CoNiCH electrode displayed an impressive performance in the oxygen evolution reaction (OER) and reached 30 mA cm-2 at an overpotential of only 200 mV. Remarkably, even after being compressed at 15.04 MPa, no obvious structural deformation is observed, and the attenuation of its catalytic efficiency is negligible. Based on the computational analysis, the CoNiCH catalyst demonstrated superior catalytic activity at the Ni site in comparison to the Co site. Furthermore, the electrode reached 30 mA cm-2 at 1.75 V in full water splitting conditions and showed no significant performance degradation even after 60 h of continuous operation. This study presents an innovative approach to robust and corrosion-resistant catalyst design.
Asunto(s)
Ácido Glicirrínico , Fotoquimioterapia , Mancha Vino de Oporto , Humanos , Fotoquimioterapia/efectos adversos , Fotoquimioterapia/métodos , Mancha Vino de Oporto/tratamiento farmacológico , Vendajes , Femenino , Fármacos Fotosensibilizantes/efectos adversos , Fármacos Fotosensibilizantes/administración & dosificación , Piel/efectos de los fármacos , Piel/patología , Piel/efectos de la radiación , Ácido Aminolevulínico/efectos adversos , AdultoRESUMEN
OBJECTIVE: Iron accumulation is associated with osteoporosis. This study aims to explore the effect of chronic iron accumulation induced by hepcidin1 deficiency on aging osteoporosis. METHODS: Iron accumulation in hepcidin1 knockout aging mice was assessed by atomic absorption spectroscopy and Perl's staining. Bone microarchitecture was observed using Micro-CT. Hepcidin, ferritin, oxidative stress, and markers of bone turnover in serum were detected by enzyme-linked immunosorbent assay. Bone formation and resorption markers were measured by real-time quantitative PCR. Cell aging was induced by D-galactose treatment. CCK-8, flow cytometry, EdU assays, and Alizarin red staining were performed to reveal the role of hepcidin1 knockout in cell model. Iron Colorimetric Assay Kit and western blot were applied to detect iron and ferritin levels in cells, respectively. RESULTS: In hepcidin1-knockout mice, the ferritin and iron contents in liver and tibia were significantly increased. Iron accumulation induced by hepcidin1 knockout caused a phenotype of low bone mass and deteriorated bone microarchitecture. Osteogenic marker was decreased and osteoclast marker was increased in mice, accompanied by increased oxidative stress level. The mRNA expression levels of osteoclast differentiation markers (RANKL, Mmp9, OPG, Trap, and CTSK) were up-regulated, while bone formation markers (OCN, ALP, Runx2, SP7, and Col-1) were down-regulated in model group, compared to wild type mice. In vitro, hepcidin1 knockdown inhibited proliferation and osteogenic differentiation, while promoted apoptosis, with increased levels of iron and ferritin. CONCLUSION: Iron accumulation induced by hepcidin1 deficiency aggravates the progression of aging osteoporosis via inhibiting osteogenesis and promoting osteoclast genesis.
Asunto(s)
Osteogénesis , Osteoporosis , Ratones , Animales , Osteoporosis/genética , Osteoporosis/metabolismo , Hierro , Ferritinas/farmacología , Diferenciación Celular/genética , EnvejecimientoAsunto(s)
Granuloma Piogénico , Hemangioma Capilar , Fotoquimioterapia , Mancha Vino de Oporto , Humanos , Mancha Vino de Oporto/cirugía , Granuloma Piogénico/inducido químicamente , Granuloma Piogénico/tratamiento farmacológico , Hematoporfirinas/uso terapéutico , Fotoquimioterapia/efectos adversosRESUMEN
Water plays a vital role in all aspects of life. Recently, water pollution has increased exponentially due to various organic and inorganic pollutants. Organic pollutants are hard to degrade; therefore, cost-effective and sustainable approaches are needed to degrade these pollutants. Organic dyes are the major source of organic pollutants from coloring industries. The photoactive metal-organic frameworks (MOFs) offer an ultimate strategy for constructing photocatalysts to degrade pollutants present in wastewater. Therefore, tuning the metal ions/clusters and organic ligands for the better photocatalytic activity of MOFs is a tremendous approach for wastewater treatment. This review comprehensively reports various MOFs and their composites, especially POM-based MOF composites, for the enhanced photocatalytic degradation of organic pollutants in the aqueous phase. A brief discussion on various theoretical aspects such as density functional theory (DFT) and machine learning (ML) related to MOF and MOF composite-based photocatalysts has been presented. Thus, this article may eventually pave the way for applying different structural features to modulate novel porous materials for enhanced photodegradation properties toward organic pollutants.
RESUMEN
An electrolyte additive, with convenient operation and remarkable functions, has been regarded as an effective strategy for prolonging the cycle life of aqueous zinc ion batteries. However, it is still difficult to dynamically regulate the unstable Zn interface during long-term cycling. Herein, tricine was introduced as an efficient regulator to achieve a pH-stable and byproduct-free interface. The functional zwitterion of tricine not only inhibits interfacial pH perturbation and parasitic reactions by the trapping effect of an anionic group (-COO-) but also simultaneously creates a uniform electric field by the electrostatic shielding effect of a cationic group (-NH2+). Such synergy accordingly eliminates dendrite formation and creates a chemical equilibrium in the electrolyte, endowing the Zn||Zn cell with long-term Zn plating/stripping for 2060 h at 5 mA cm-2 and 720 h at 10 mA cm-2. As a result, the Zn||VS2 full cell under a high cathodic loading mass (8.6 mg cm-2) exhibits exceptional capacity retention of 93% after 1000 cycles.
RESUMEN
Metal-organic frameworks (MOFs) are emerging as promising candidates for electrochemical glucose sensing owing to their ordered channels, tunable chemistry, and atom-precision metal sites. Herein, the efficient nonenzymatic electrochemical glucose sensing is achieved by taking advantage of Ni(II)-based metal-organic frameworks (Ni(II)-MOFs) and acquiring the ever-reported fastest response time. Three Ni(II)-MOFs ({[Ni6L2(H2O)26]4H2O}n (CTGU-33), {Ni(bib)1/2(H2L)1/2(H2O)3}n (CTGU-34), {Ni(phen)(H2L)1/2(H2O)2}n (CTGU-35)) have been synthesized for the first time, which use benzene-1,2,3,4,5,6-hexacarboxylic acid (H6L) as an organic ligand and introduce 1,4-bis(1-imidazoly)benzene (bib) or 1,10-phenanthroline (phen) as spatially auxiliary ligands. Bib and phen convert the coordination mode of CTGU-33, affording structural dimensions from 2D of CTGU-33 to 3D of CTGU-34 or 1D of CTGU-35. By tuning the dimension of the skeleton, CTGU-34 with 3D interconnected channels exhibits an ultrafast response of less than 0.4 s, which is superior to the existing nonenzymatic electrochemical sensors. Additionally, a low detection limit of 0.12 µM (S/N = 3) and a high sensitivity of 1705 µA mM-1 cm-2 are simultaneously achieved. CTGU-34 further showcases desirable anti-interference and cycling stability, which demonstrates a promising application prospect in the real-time detection of glucose.
RESUMEN
Combining the features of the host-guest system and chirality is an efficient strategy to achieve circularly polarized luminescence (CPL). Herein, well-defined chiral carbon nanodot (chirCND) arrays were confined-synthesized by low-temperature calcination of a chiral amino acid loaded metal-organic framework (MOF) to induce high CPL. An achiral porous pyrene-based MOF NU-1000 thin film as the host template was prepared by a liquid-phase epitaxial layer-by-layer fashion, and chiral amino acids as the carbon sources could be confined in the porous MOF and carbonized to homogeneous and ultrasmall chirCND arrays, resulting in a chirCNDs@NU-1000 thin film (l-CNDsx@NU-1000; x = l-cysteine (cys), l-serine, l-histidine, l-glutamic acid, and l-pyroglutamic acid). The results show the pristine chirCNDs by directly carbonizing chiral amino acids hardly endow them with a CPL property. By contrast, benefiting from the arrayed confinement and coordination interaction between chirCNDs and NU-1000, the chirality transfer on the excited state of chirCNDs@NU-1000 is enabled, leading to strong CPL performance (a high luminescence dissymmetry factor glum of l-CNDscys@NU-1000 thin film reached 1.74 × 10-2). This study of chirCNDs encapsulated in fluorescent MOF thin films provides a strategy for developing uniform chiral carbon nanoarrays and offers chiral host-guest thin-film materials for optical applications.
RESUMEN
The interface microenvironment of doped quantum dots (QDs) is crucial in optimizing the properties associated with the photogenerated excitons. However, the imprecision of QDs' surface structures and compositions impedes a thorough understanding of the modulation mechanism caused by the complex interface microenvironment, particularly distinguishing the contribution of surface dopants from inner ones. Herein, we investigated interface-mediated emission using a unique model of an atomically precise chalcogenide semiconductor nanocluster containing uniform near-surface Mn2+ dopants. Significantly, we discovered that Mn2+ ions can directly transfer charges with hydrogen-bonding-bound electron-rich alkylamines with matched molecular configurations and electronic structures at the interface. This work provides a new pathway, the use of atomically precise nanoclusters, for analyzing and enhancing the interface-dependent properties of various doped QDs, including chalcogenides and perovskites.
RESUMEN
Capacitive deionization (CDI) is an electrochemical method of extracting ions from solution at potentials below electrolysis. It has various applications ranging from water remediation and desalination to heavy metal removal and selective resource recovery. A CDI device applies an electrical charge across two porous electrodes to attract and remove ions without producing waste products. It is generally considered environmentally friendly and promising for sustainability, yet ion removal efficiency still falls short of more established filtration methods. Commercially available activated carbon is typically used for CDI, and its ion adsorption capacity is low at approximately 20-30 mg g-1. Recently, much interest has been in the highly porous and well-structured family of materials known as metal-organic frameworks (MOFs). Most MOFs are poor conductors of electricity and cannot be directly used to make electrodes. A common workaround is to pyrolyze the MOF to convert its organic components to carbon while maintaining its underlying microstructure. However, most MOF-derived materials only retain partial microstructure after pyrolysis and cannot inherit the robust porosity of the parent MOFs. This review provides a systematic breakdown of structure-performance relationships between a MOF-derived material and its CDI performance based on recent works. This review also serves as a starting point for researchers interested in developing MOF-derived materials for CDI applications.
RESUMEN
Solar-driven high-efficiency conversion of CO2 with water vapor into high-value-added alcohols is a promising approach for reducing CO2 emissions and achieving carbon neutrality. However, the rapid recombination of photogenerated carriers and low CO2 adsorption capacity of photocatalysts are usually the factors that limit their applicability. Herein, a series of low-cost Z-scheme heterostructures Cu2O/PCN-250-x are constructed by in situ growth of ultrasmall Cu2O nanoparticles on PCN-250. A systematic investigation revealed that there is a strong interaction between Cu2O nanoparticles and PCN-250. The resulting Cu2O/PCN-250-2 exhibits excellent photogenerated carrier separation efficiency and CO2 adsorption capacity, which dramatically promote the conversion of CO2 into alcohols. Notably, the total yield of 268 µmol gcat-1 for the production of CH3OH and CH3H2OH is superior to that of isolated PCN-250 and Cu2O. This study provides a new perspective for the design of a Cu2O nanoparticle/metal-organic framework Z-scheme heterojunction for the reduction of CO2 to alcohols with water vapor.
RESUMEN
A series of seaweed-like heterogeneous Co3(PO4)2/Ni3(PO4)2/MOF-74-x electrocatalysts were synthesized via a hydrothermal method. The optimal composite exhibits excellent catalytic performance toward methanol/ethanol oxidation reactions (MOR/EOR) with peak current densities reaching 27.5 and 32.6 mA cm-2, respectively. This work heralds the advent of more efficient heterogeneous electrocatalysts for DAFCs and other energy conversion systems.