Construction of semiconductor nanocomposites for room-temperature gas sensors.

Gas sensors are essential for ensuring public safety and improving quality of life. Room-temperature gas sensors are notable for their potential economic benefits and low energy consumption, and their expected integration with wearable electronics, making them a focal point of contemporary research. Advances in nanomaterials and low-dimensional semiconductors have significantly contributed to the enhancement of room-temperature gas sensors. These advancements have focused on improving sensitivity, selectivity, and response/recovery times, with nanocomposites offering distinct advantages. The discussion here focuses on the use of semiconductor nanocomposites for gas sensing at room temperature, and provides a review of the latest synthesis techniques for these materials. This involves the precise adjustment of chemical compositions, microstructures, and morphologies. In addition, the design principles and potential functional mechanisms are examined. This is crucial for deepening the understanding and enhancing the operational capabilities of sensors. We also highlight the challenges faced in scaling up the production of nanocomposite materials. Looking ahead, semiconductor nanocomposites are expected to drive innovation in gas sensor technology due to their carefully crafted design and construction, paving the way for their extensive use in various sectors.

Electrochemical protein biosensors for disease marker detection: progress and opportunities.

The development of artificial intelligence-enabled medical health care has created both opportunities and challenges for next-generation biosensor technology. Proteins are extensively used as biological macromolecular markers in disease diagnosis and the analysis of therapeutic effects. Electrochemical protein biosensors have achieved desirable specificity by using the specific antibody-antigen binding principle in immunology. However, the active centers of protein biomarkers are surrounded by a peptide matrix, which hinders charge transfer and results in insufficient sensor sensitivity. Therefore, electrode-modified materials and transducer devices have been designed to increase the sensitivity and improve the practical application prospects of electrochemical protein sensors. In this review, we summarize recent reports of electrochemical biosensors for protein biomarker detection. We highlight the latest research on electrochemical protein biosensors for the detection of cancer, viral infectious diseases, inflammation, and other diseases. The corresponding sensitive materials, transducer structures, and detection principles associated with such biosensors are also addressed generally. Finally, we present an outlook on the use of electrochemical protein biosensors for disease marker detection for the next few years.

A miniprotein receptor electrochemical biosensor chip based on quantum dots.

Recently protein binders have emerged as a promising substitute for antibodies due to their high specificity and low cost. Herein, we demonstrate an electrochemical biosensor chip through the electronic labelling strategy using lead sulfide (PbS) colloidal quantum dots (CQDs) and the unnatural SARS-CoV-2 spike miniprotein receptor LCB. The unnatural receptor can be utilized as a molecular probe for the construction of CQD-based electrochemical biosensor chips, through which the specific binding of LCB and the spike protein is transduced to sensor electrical signals. The biosensor exhibits a good linear response in the concentration range of 10 pg mL-1 to 1 µg mL-1 (13.94 fM to 1.394 nM) with the limit of detection (LOD) being 3.31 pg mL-1 (4.607 fM for the three-electrode system) and 9.58 fg mL-1 (0.013 fM for the HEMT device). Due to the high sensitivity of the electrochemical biosensor, it was also used to study the binding kinetics between the unnatural receptor LCB and spike protein, which has achieved comparable results as those obtained with commercial equipment. To the best of our knowledge, this is the first example of using a computationally designed miniprotein receptor based on electrochemical methods, and it is the first kinetic assay performed with an electrochemical assay alone. The miniprotein receptor electrochemical biosensor based on QDs is desirable for fabricating high-throughput, large-area, wafer-scale biochips.

Single-Atom Cu Stabilized on Ultrathin WO2.72 Nanowire for Highly Selective and Ultrasensitive ppb-Level Toluene Detection.

Various catalysts are developed to improve the performance of metal oxide semiconductor gas sensors, but achieving high selectivity and response intensity in chemiresistive gas sensors (CGSs) remains a significant challenge. In this study, an in situ-annealing approach to synthesize Cu catalytic sites on ultrathin WO2.72 nanowires for detecting toluene at ultralow concentrations (Ra /Rg = 1.9 at 10 ppb) with high selectivity is developed. Experimental and molecular dynamic studies reveal that the Cu single atoms (SAs) act as active sites, promoting the oxidation of toluene and increasing the affinity of Cu single-atom catalysts (SACs)-containing sensing materials for toluene while weakening the association with carbon dioxide or water vapor. Density functional theory studies show that the selective binding of toluene to Cu SAs is due to the favorable binding sites provided by Cu SAs for toluene molecules over other gaseous species, which aids the adsorption of toluene on WO2.72 nanowires. This study demonstrates the successful atomic-level interface regulation engineering of WO2.72 nanowire-supported Cu SAs, providing a potential strategy for the development of highly active and durable CGSs.

Hollow-Out Fe2O3-Loaded NiO Heterojunction Nanorods Enable Real-Time Exhaled Ethanol Monitoring under High Humidity.

The analysis of exhaled breath has opened up new exciting avenues in medical diagnostics, sleep monitoring, and drunk driving detection. Nevertheless, the detection accuracy is greatly affected due to high humidity in the exhaled breath. Here, we propose a regulation method to solve the problem of humidity adaptability in the ethanol-monitoring process by building a heterojunction and hollow-out nanostructure. Therefore, large specific surface area hollow-out Fe2O3-loaded NiO heterojunction nanorods assembled by porous ultrathin nanosheets were prepared by a well-tailored interface reaction. The excellent response (51.2 toward 10 ppm ethanol at 80% relative humidity) and selectivity to ethanol under high relative humidity with a lower operating temperature (150 °C) were obtained, and the detection limit was as low as 0.5 ppb with excellent long-term stability. The superior gas-sensing performance was attributed to the high surface activity of the heterojunction and hollow-out nanostructure. More importantly, GC-MS, diffuse reflectance Fourier transform infrared spectroscopy, and DFT were utilized to analyze the mechanisms of heterojunction sensitization, ethanol-sensing reaction, and high-humidity adaptability. Our integrated low-power MEMS Internet of Things (IoT) system based on Fe2O3@NiO successfully demonstrates the functional verification of ethanol detection in human exhalation, and the integrated voice alarm and IoT positioning functions are expected to solve the problem of real-time monitoring and rapid initial screening of drunk driving. Overall, this novel method plays a vital role in areas such as control of material morphology and composition, breath analysis, gas-sensing mechanism research, and artificial olfaction.

Flexible Amperometric Immunosensor Based on Colloidal Quantum Dots for Detecting the Myeloperoxidase (MPO) Systemic Inflammation Biomarker.

Myeloperoxidase (MPO) has been demonstrated to be a biomarker of neutrophilic inflammation in various diseases. Rapid detection and quantitative analysis of MPO are of great significance for human health. Herein, an MPO protein flexible amperometric immunosensor based on a colloidal quantum dot (CQD)-modified electrode was demonstrated. The remarkable surface activity of CQDs allows them to bind directly and stably to the surface of proteins and to convert antigen-antibody specific binding reactions into significant currents. The flexible amperometric immunosensor provides quantitative analysis of MPO protein with an ultra-low limit of detection (LOD) (31.6 fg mL-1), as well as good reproducibility and stability. The detection method is expected to be applied in clinical examination, POCT (bedside test), community physical examination, home self-examination and other practical scenarios.

All-solid-state SARS-CoV-2 protein biosensor employing colloidal quantum dots-modified electrode.

Rapid and reliable detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antibody can provide immunological evidence in addition to nucleic acid test for the early diagnosis and on-site screening of coronavirus disease 2019 (COVID-19). All-solid-state biosensor capable of rapid, quantitative SARS-CoV-2 antibody testing is still lacking. Herein, we propose an electronic labelling strategy of protein molecules and demonstrate SARS-CoV-2 protein biosensor employing colloidal quantum dots (CQDs)-modified electrode. The feature current peak corresponding to the specific binding reaction of SARS-CoV-2 antigen and antibody proteins was observed for the first time. The unique charging and discharging effect depending on the alternating voltage applied was ascribed to the quantum confinement, Coulomb blockade and quantum tunneling effects of quantum dots. CQDs-modified electrode could recognize the specific binding reaction between antigen and antibody and then transduce it into significant electrical current. In the case of serum specimens from COVID-19 patient samples, the all-solid-state protein biosensor provides quantitative analysis of SARS-CoV-2 antibody with correlation coefficient of 93.8% compared to enzyme-linked immunosorbent assay (ELISA) results. It discriminates patient and normal samples with accuracy of about 90%. The results could be read within 1 min by handheld testing system prototype. The sensitive and specific protein biosensor combines the advantages of rapidity, accuracy, and convenience, facilitating the implement of low-cost, high-throughput immunological diagnostic technique for clinical lab, point-of-care testing (POCT) as well as home-use test.

Template-Free Construction of Tin Oxide Porous Hollow Microspheres for Room-Temperature Gas Sensors.

Porous hollow microsphere (PHM) materials represent ideal building blocks for realizing diverse functional applications such as catalysis, energy storage, drug delivery, and chemical sensing. This has stimulated intense efforts to construct metal oxide PHMs for achieving highly sensitive and low-power-consumption semiconductor gas sensors. Conventional methods for constructing PHMs rely on delicate reprogramming of templates and may suffer from the structural collapse issue during the removal of templates. Here, we propose a template-free method for the construction of tin oxide (SnO2) PHMs via the competition between the solvent evaporation rate and the phase separation dynamics of colloidal SnO2 quantum wires. The SnO2 PHMs (typically 3 ± 0.5 µm diameter and approximately 200 nm shell thickness) exhibit desirable structural stability with desirable processing compatibility with various substrates. This enables the realization of NO2 gas sensors having a superior response and recovery process at room temperature. The superior NO2-sensing characteristic is attributed to the effective gas adsorption competition on solid surfaces benefiting from efficient diffusion channels, enhancing the interaction of metal oxide solids with gas molecules in terms of the receptor function, transducer function, and utility factor. In addition, the one-step deposition of SnO2 PHMs directly onto device substrates simplifies the fabrication conditions for semiconductor gas sensors. The desirable structural stability of PHMs combined with the functional diversity of metal oxides may open new opportunities for the design of functional materials and devices.

MoS2 Nanosheets Sensitized with Quantum Dots for Room-Temperature Gas Sensors.

The Internet of things for environment monitoring requires high performance with low power-consumption gas sensors which could be easily integrated into large-scale sensor network. While semiconductor gas sensors have many advantages such as excellent sensitivity and low cost, their application is limited by their high operating temperature. Two-dimensional (2D) layered materials, typically molybdenum disulfide (MoS2) nanosheets, are emerging as promising gas-sensing materials candidates owing to their abundant edge sites and high in-plane carrier mobility. This work aims to overcome the sluggish and weak response as well as incomplete recovery of MoS2 gas sensors at room temperature by sensitizing MoS2 nanosheets with PbS quantum dots (QDs). The huge amount of surface dangling bonds of QDs enables them to be ideal receptors for gas molecules. The sensitized MoS2 gas sensor exhibited fast and recoverable response when operated at room temperature, and the limit of NO2 detection was estimated to be 94 ppb. The strategy of sensitizing 2D nanosheets with sensitive QD receptors may enhance receptor and transducer functions as well as the utility factor that determine the sensor performance, offering a powerful new degree of freedom to the surface and interface engineering of semiconductor gas sensors.

Humidity-Independent Gas Sensors Using Pr-Doped In2O3 Macroporous Spheres: Role of Cyclic Pr3+/Pr4+ Redox Reactions in Suppression of Water-Poisoning Effect.

Pure and 3-12 at. % Pr-doped In2O3 macroporous spheres were fabricated by ultrasonic spray pyrolysis and their acetone-sensing characteristics under dry and humid conditions were investigated to design humidity-independent gas sensors. The 12 at. % Pr-doped In2O3 sensor exhibited approximately the same acetone responses and sensor resistances at 450 °C regardless of the humidity variation, whereas the pure In2O3 exhibited significant deterioration in gas-sensing characteristics upon the change in the atmosphere, from dry to humid (relative humidity: 80%). Moreover, the 12 at. % Pr-doped In2O3 sensor exhibited a high response to acetone with negligible cross responses to interfering gases (NH3, CO, benzene, toluene, NO2, and H2) under the highly humid atmosphere. The mechanism for the humidity-immune gas-sensing characteristics was investigated by X-ray photoelectron and diffuse reflectance infrared Fourier transform spectroscopies together with the phenomenological gas-sensing results and discussed in relation with Pr3+/Pr4+ redox pairs, regenerative oxygen adsorption, and scavenging of hydroxyl groups.

Highly Sensitive and Selective PbTiO3 Gas Sensors with Negligible Humidity Interference in Ambient Atmosphere.

Three PbTiO3 nanostructures were synthesized using a one-step hydrothermal reaction with different TiO2 powders as Ti sources, and their gas-sensing properties were investigated. The sensor comprising PbTiO3 nanoplates (NPs) exhibited a high response (resistance ratio = 80.4) to 5 ppm ethanol at 300 °C and could detect trace concentrations of ethanol down to 100 ppb. Moreover, the sensor showed high ethanol selectivity and nearly the same sensing characteristics despite the wide range of humidity variation from 20 to 80% RH. The mechanism for humidity-independent gas sensing was elucidated using diffuse reflectance infrared Fourier transform spectra. PbTiO3 NPs are new and promising sensing materials that can be used for detecting ethanol in a highly sensitive and selective manner with negligible interference from ambient humidity.

Flexible Room-Temperature NH3 Sensor for Ultrasensitive, Selective, and Humidity-Independent Gas Detection.

Ammonia (NH3) is an irritant gas with a unique pungent odor; sub-parts per million-level breath ammonia is a medical biomarker for kidney disorders and Helicobacter pylori bacteria-induced stomach infections. The humidity varies in both ambient environment and exhaled breath, and thus humidity dependence of gas-sensing characteristics is a great obstacle for real-time applications. Herein, flexible, humidity-independent, and room-temperature ammonia sensors are fabricated by the thermal evaporation of CuBr on a polyimide substrate and subsequent coating of a nanoscale moisture-blocking CeO2 overlayer by electron-beam evaporation. CuBr sensors coated with a 100 nm-thick CeO2 overlayer exhibits an ultrahigh response (resistance ratio) of 68 toward 5 ppm ammonia with excellent gas selectivity, rapid response, reversibility, and humidity-independent sensing characteristics at room temperature. In addition, the sensing performance remains stable after repetitive bending and long-term operation. Moreover, the sensors exhibit significant response to the simulated exhaled breath of patients with H. pylori infection; the simulated breath contains 50 ppb NH3. The sensors thus show promising potential in detecting sub-parts per million-level NH3, regardless of humidity fluctuations, which can open up new applications in wearable devices for in situ medical diagnosis and indoor/outdoor environment monitoring.

Hierarchical and Hollow Fe2O3 Nanoboxes Derived from Metal-Organic Frameworks with Excellent Sensitivity to H2S.

Hierarchical and hollow porous Fe2O3 nanoboxes (with an average edge length of ∼500 nm) were derived from metal-organic frameworks (MOFs) and the gas sensing characteristics were investigated. Sensors based on Fe2O3 nanoboxes exhibited a response (resistance ratio) of 1.23 to 0.25 ppm (ppm) hydrogen sulfide (H2S) at 200 °C, the response/recovery speed is fast and the selectivity to H2S is excellent. Remarkably, the sensor showed fully reversible response to 5 ppm of H2S at 50 °C, demonstrating its promise for operating at near room temperature, which is favorable for medical diagnosis and indoor/outdoor environment monitoring. The excellent performance of the Fe2O3 nanoboxes can be ascribed to the unique morphology with high specific surface area (SSA) and porous nanostructure.