RESUMEN
The success of any drilling activity mainly depends on the characteristics of the drilling fluid. Therefore, a high-performance drilling fluid is substantial for any drilling operation. During overbalance drilling operations, the drilling mud invades the permeable formations and causes the loss of circulation, which is responsible for nonproductive time events. Hence, the filtration characteristics of the drilling mud are an imperative property. The purpose of this study is to evaluate the filtration characteristics of water-based mud systems in the presence of polyanionic cellulose (PAC) and multiwalled carbon nanotubes (MWCNTs)/TiO2 nanoparticles. The nanoparticles were synthesized by using the hydrothermal technique. For the first time, a composite of MWCNTs and TiO2 has been utilized as a fluid loss control additive in the petroleum sector, marking a significant development in the field. The filtration properties of water-based mud were assessed at two concentrations (0.35 g and 3.5 g). Furthermore, based on the two levels (concentrations) and two factors (particles), the novel application of the central composite response surface design of experiment (CCD) was implemented. The results showed that the predicted model from CCD was in good agreement with the filter press experimental result with R 2 = 0.8446. Furthermore, based on the ANOVA analysis, the concentration of MWCNTs/TiO2 nanoparticles was the most significant parameter with p-value < 0.05. In addition, 10 out of 13 experimental points fall under the ±10% error window, thus indicating a higher accuracy of the regression model. The 2D interactive plots further show that the concentration of PAC is insignificant and has no considerable influence on fluid loss control, which was also validated by p-value > 0.05. The performance of MWCNTs/TiO2 nanoparticles is superior to PAC because these nanodimension particles plug the pore-spacing and block the permeation channels on the filter paper. However, the PAC, because of its long molecular chain, entangles around the pore spaces and plugs the microsize pores, which eventually reduces the filtration loss volume up to some extent. By observing the synergistic interaction between MWCNTs/TiO2 nanoparticles and PAC, this study develops valuable insights that assist in improving the performance of drilling fluid and minimizes the wellbore instability issues in the oil and gas sector.
RESUMEN
The application of cellulose derivatives including carboxymethyl cellulose (CMC), polyanionic cellulose (PAC), hydroxyethyl cellulose (HEC), cellulose nanofibrils (CNFs), and cellulose nanocrystals (CNCs) has gained enormous interest, especially as environmentally friendly additives for water-based drilling fluids (WBDFs). This is due to their sustainable, biodegradable, and biocompatible nature. Furthermore, cellulose nanomaterials (CNMs), which include both CNFs and CNCs, possess unique properties such as nanoscale dimensions, a large surface area, as well as unique mechanical, thermal, and rheological performance that makes them stand out as compared to other additives used in WBDFs. The high surface hydration capacity, strong interaction with bentonite, and the presence of a complex network within the structure of CNMs enable them to act as efficient rheological modifiers in WBDFs. Moreover, the nano-size dimension and facilely tunable surface chemistry of CNMs make them suitable as effective fluid loss reducers as well as shale inhibitors as they have the ability to penetrate, absorb, and plug the nanopores within the exposed formation and prevent further penetration of water into the formation. This review provides an overview of recent progress in the application of cellulose derivatives, including CMC, PAC, HEC, CNFs, and CNCs, as additives in WBDFs. It begins with a discussion of the structure and synthesis of cellulose derivatives, followed by their specific application as rheological, fluid loss reducer, and shale inhibition additives in WBDFs. Finally, the challenges and future perspectives are outlined to guide further research and development in the effective utilization of cellulose derivatives as additives in WBDFs.
RESUMEN
Pickering foam is a type of foam stabilized by solid particles known as Pickering stabilizers. These solid stabilizers adsorb at the liquid-gas interface, providing superior stability to the foam. Because of its high stability, controllability, versatility, and minimal environmental impact, nanomaterial-stabilized Pickering foam has opened up new possibilities and development prospects for foam applications. This review provides an overview of the current state of development of Pickering foam stabilized by a wide range of nanomaterials, including cellulose nanomaterials, chitin nanomaterials, silica nanoparticles, protein nanoparticles, clay mineral, carbon nanotubes, calcium carbonate nanoparticles, MXene, and graphene oxide nanosheets. Particularly, the preparation and surface modification methods of various nanoparticles, the fundamental properties of nanomaterial-stabilized Pickering foam, and the synergistic effects between nanoparticles and surfactants, functional polymers, and other additives are systematically introduced. In addition, the latest progress in the application of nanomaterial-stabilized Pickering foam in the oil industry, food industry, porous functional material, and foam flotation field is highlighted. Finally, the future prospects of nanomaterial-stabilized Pickering foam in different fields, along with directions for further research and development directions, are outlined.
RESUMEN
With the increase of sustainable development goal, the bio-based adsorption materials with high and selective dye removal are important for water treatment in the dyeing industry. In this paper, a bio-based adsorption foam composed of metal-organic frameworks (MOF) and polyethyleneimine (PEI)-modified cellulose was prepared by a three-step process, i.e., PEI modification of cellulose fibers (PC), MOF decoration of PEI-modified cellulose (MIL-53@PC), and in-situ foaming with polyurethane. PEI modification provides cellulose fiber with more active sites for both dye adsorption and MOF bonding. We found that MIL-53 crystals were tightly bonded on the surface of PC through hydrogen bonding. Because of the abundant adsorption sites (e.g., amines, iron oxide group), the MIL-53@PC demonstrated high adsorption capacity and selectivity for anionic dye (e.g., 936.5 mg/g for methyl orange) through electrostatic interaction and hydrogen bonding. Finally, MIL-53@PC particles were blended with a waterborne polyurethane prepolymer to prepare a three-dimensional hydrophilic foam (MIL-53@PC/PUF), which not only maintained high adsorption capacity and selectivity of MIL-53@PC and also improved its recyclability and reusability. The MIL-53@PC/PUF offers a promising solution for dye wastewater treatment.
Asunto(s)
Celulosa/análogos & derivados , Estructuras Metalorgánicas , Polietileneimina/análogos & derivados , Contaminantes Químicos del Agua , Colorantes/química , Adsorción , Polietileneimina/química , Poliuretanos , Contaminantes Químicos del Agua/químicaRESUMEN
The aqueous zinc-ion battery is promising as grid scale energy storage device, but hindered by the instable electrode/electrolyte interface. Herein, we report the lean-water ionic liquid electrolyte for aqueous zinc metal batteries. The lean-water ionic liquid electrolyte creates the hydrophobic tri-layer interface assembled by first two layers of hydrophobic OTF- and EMIM+ and third layer of loosely attached water, beyond the classical Gouy-Chapman-Stern theory based electrochemical double layer. By taking advantage of the hydrophobic tri-layer interface, the lean-water ionic liquid electrolyte enables a wide electrochemical working window (2.93â V) with relatively high zinc ion conductivity (17.3â mS/cm). Furthermore, the anion crowding interface facilitates the OTF- decomposition chemistry to create the mechanically graded solid electrolyte interface layer to simultaneously suppress the dendrite formation and maintain the mechanical stability. In this way, the lean-water based ionic liquid electrolyte realizes the ultralong cyclability of over 10000 cycles at 20â A/g and at practical condition of N/P ratio of 1.5, the cumulated areal capacity reach 1.8â Ah/cm2 , which outperforms the state-of-the-art zinc metal battery performance. Our work highlights the importance of the stable electrode/electrolyte interface stability, which would be practical for building high energy grid scale zinc-ion battery.