RESUMEN
Solar-driven interfacial evaporation (SDIE) is a highly promising approach to achieve sustainable desalination and tackle the global freshwater crisis. Despite advancements in this field, achieving balanced thermal localization and salt resistance remains a challenge. Herein, the study presents a 3D hierarchical porous ceramic platform for SDIE applications. The utilized alumina foam ceramics (AFCs) exhibit remarkable corrosion resistance and chemical stability, ensuring a prolonged operational lifespan in seawater or brines. The millimeter-scale air-filled pores in AFCs prevent thermal losses through conduction with bulk water, resulting in heat-localized interfaces. The hydrophilic nature of macroporous AFC skeletons facilitates rapid water replenishment on the evaporating surface for effective salt-resistant desalination. Benefiting from its self-radiation adsorption and side-assisted evaporation capabilities, the AFC-based evaporators exhibit high indoor evaporation rates of 2.99 and 3.54 kg m-2 h-1 under one-sided and three-sided illumination under 1.0 sun, respectively. The AFC-based evaporator maintains a high evaporation rate of ≈2.77 kg m-2 h-1 throughout the 21-day long-term test. Furthermore, it achieves a daily water productivity of ≈10.44 kg m-2 in outdoor operations. This work demonstrates the potential of 3D hierarchical porous ceramics in addressing the trade-off between heat localization and salt resistance, and contributes to the development of durable solar steam generators.
RESUMEN
The electrochemical activity and stability of the PBCO electrode are investigated under the annealing processes in an atmosphere containing CO2/H2O for solid oxide fuel cells (SOFCs). The electrochemical impedance spectrum results unequivocally confirm the significant deterioration in PBCO cathode performance upon annealing under ambient air conditions, particularly when exposed to CO2/H2O atmospheres. Microstructure and surface chemical state analyses reveal the segregation of BaO on the PBCO surface, and the formation of insulating BaCO3 degraded the electrochemical performance. CO2 and H2O exhibit a significant induced effect on the segregation of Ba in PBCO to the surfaces, thereby causing a rapid decline in electrode performance. Additionally, the analysis of volume relaxation reveals that the presence of oxygen in the electrode environment can also influence the deposition process occurring on the surface of the electrode. However, this phenomenon is not observed in N2. This study emphasizes the impact of various gases present in the working atmosphere on surface-separated BaO, which consequently plays a pivotal role in the activity and long-term stability of PBCO electrodes.
RESUMEN
Developing robust and cost-effective electrocatalysts to boost hydrogen evolution reactions (HERs) and oxygen evolution reactions (OERs) is crucially important to electrocatalytic water splitting. Herein, bifunctional electrocatalysts, by coupling Co nanoparticles and N-doped carbon nanotubes/graphitic nanosheets (Co@NCNTs/NG), were successfully synthesized via facile high-temperature pyrolysis and evaluated for water splitting. The morphology and particle size of products were influenced by the precursor type of the cobalt source (cobalt oxide or cobalt nitrate). The pyrolysis product prepared using cobalt oxide as a cobalt source (Co@NCNTs/NG-1) exhibited the smaller particle size and higher specific surface area than that of the pyrolysis products prepared using cobalt nitrate as a cobalt source (Co@NCNTs/NG-2). Notably, Co@NCNTs/NG-1 displayed much lower potential -0.222 V vs. RHE for HER and 1.547 V vs. RHE for OER at the benchmark current density of 10 mA cm-2 than that of Co@NCNTs/NG-2, which indicates the higher bifunctional catalytic activities of Co@NCNTs/NG-1. The water-splitting device using Co@NCNTs/NG-1 as both an anode and cathode demonstrated a potential of 1.92 V to attain 10 mA cm-2 with outstanding stability for 100 h. This work provides a facile pyrolysis strategy to explore highly efficient and stable bifunctional electrocatalysts for water splitting.
RESUMEN
Lithium (Li) metal has been regarded as the "Holy Grail" of Li battery anodes thanks to its high theoretic specific capacity and low reduction potential, but uneven formation of Li dendrites and uncontrollable Li volume changes hinder the practical applications of Li metal anodes. A three-dimensional (3D) current collector is one of the promising strategies to address the above issues if it can be compatible with current industrialized process. Here, Au-decorated carbon nanotubes (Au@CNTs) are electrophoretically deposited on commercial Cu foil as a 3D lithiophilic skeleton to regulate Li deposition. The thickness of the as-prepared 3D skeleton can be accurately controlled by adjusting the deposition time. Benefitting from the reduced localized current density and improved Li affinity, the Au@CNTs-deposited Cu foil (Au@CNTs@Cu foil) achieves uniform Li nucleation and dendrite-free Li deposition. Compared with bare Cu foil and CNTs deposited Cu foil (CNTs@Cu foil), the Au@CNTs@Cu foil exhibits enhanced Coulombic efficiency and better cycling stability. In the full-cell configuration, the Au@CNTs@Cu foil with predeposited Li shows superior stability and rate performance. This work provides a facial strategy to directly construct a 3D skeleton on commercial Cu foils with lithiophilic building blocks for stable and practical Li metal anodes.
RESUMEN
Carbon-encapsulated transition metal catalysts have caught the interest of researchers in the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) due to their distinctive architectures and highly tunable electronic structures. In this work, we synthesized N-doped carbon encapsulated with CoNi nanoalloy particles (CoNi@NC) as the electrocatalysts. The metal-organic skeleton ZIF-67 nanocubes were first synthesized, and then Ni2+ ions were inserted to generate CoNi-ZIF precursors by a simple ion-exchange route, which was followed by pyrolysis and with urea for the introduction of nitrogen (N) at a low temperature to synthesize CoNi@NC composites. The results reveal that ZIF-67 pyrolysis can dope more N atoms in the carbon skeleton and that the pyrolysis temperature influences the ORR and OER performances. The sample prepared by CoNi@NC pyrolysis at 650 °C has a high N content (9.70%) and a large specific surface area (167 m2 g-1), with a positive ORR onset potential (Eonset) of 0.89 V vs. RHE and half-wave potential (E1/2) of 0.81 V vs. RHE in 0.1 M KOH, and the overpotential of the OER measured in 1 M KOH was only 286 mV at 10 mA cm-2. The highly efficient bifunctional ORR/OER electrocatalysts synthesized by this method can offer some insights into the design and synthesis of complex metal-organic frameworks (MOFs) hybrid structures and their derivatives as functional materials in energy storage.
RESUMEN
Nitrous oxide (N2O) is a potent greenhouse gas, which is produced during nitrifying and denitrifying processes. Some factors and mechanisms affecting N2O emission have been reported in previous literature, but wastewater biological nitrification is accompanied by a dynamic process of dissolved oxygen (DO) consumption and pH reduction, it is more meaningful to study the synergistic effects between DO and pH on N2O production. In this study, the synergistic effects between DO and pH on N2O production were investigated with real domestic wastewater. The results showed that high DO levels and a high pH could improve the oxidation ratio of NH4+-N and the production ratio of NO2--N, while effectively reducing the accumulation ratio of N2O. The NH4+-N was a prerequisite for nitrifier denitrification; when NH4+-N was oxidized completely, there would be no N2O production and an even higher concentration of NO2- The pH factor is shown to directly affect N2O emission, although free ammonia and free nitrous acid which changed with pH had no correlation with N2O emission. There were two reasons: (1) pH can influence the flow direction of electrons afforded by NH2OH oxidation; at high pH, electrons were mainly used for combining H+ and O2 (O2+4H++4e-=2H2O), the accumulation of NO2- cannot be a result of denitrification, and a higher DO can get more electrons to prefer NO2- and (2) NH4+ was the prerequisite for NH2OH oxidation, since NH2OH oxidation process was the way to provide electrons for nitrifier denitrification.