Monoporous Microsphere as a Dynamically Movable Drug Carrier for Osteoporotic Bone Remodeling.

To repair systematically osteoporotic bone defects, it is important to make an effort to both diminish osteoporosis and enhance bone regeneration. Herein, a specifically monoporous microsphere (MPM) carrier encapsulating dosage-sensitive and short half-time parathyroid hormone (PTH) is constructed to tackle the issue. Compared with conventional microsphere carriers involving compact, porous, and mesoporous microspheres, the MPM is desirable to achieve precisely in situ delivery and to minimize topical accumulation. The findings show that the PTH loaded inside MPMs can be gradually released from the single hole of MPMs to improve the initial drug concentration. Also, the MPMs can self-shift with the daily movement of experimental animals to effectively reduce the topical aggregation of released drugs in vitro. In vivo evaluation further confirms that the implant of MPMs-PTH plays a dual role in stimulating the regenerative repair of the cranial defect and relieving osteoporosis in the whole body. Consequently, the current work develops a dynamically movable drug delivery system to achieve precisely in situ delivery, minimize topical accumulation, and systematically repair osteoporotic bone defects.

Freeze-casting osteochondral scaffolds: The presence of a nutrient-permeable film between the bone and cartilage defect reduces cartilage regeneration.

Microfracture treatment that is basically relied on stem cells and growth factors in bone marrow has achieved a certain progress for cartilage repair in clinic. Nevertheless, the neocartilage generated from the microfracture strategy is limited endogenous regeneration and prone to fibrosis due to the influences of cell inflammation and vascular infiltration. To explore the crucial factor for articular cartilage remodeling, here we design a trilaminar osteochondral scaffold with a selective permeable film in middle isolation layer which can prevent stem cells, immune cells, and blood vessels in the bone marrow from invading into the cartilage layer, but allow the nutrients and cytokines to penetrate. Our findings show that the trilaminar scaffold exhibits a good biocompatibility and inflammatory regulation, but the osteochondral repair is far less effective than the control of double-layer scaffold without isolation layer. These results demonstrate that it is not adequate to rely only on nutrients and cytokines to promote reconstruction of articular cartilage, and the various cells in bone marrow are indispensable. Consequently, the current study illustrates that cell infiltration involving stem cells, immune cells and other cells from bone marrow plays a crucial role in articular cartilage remodeling based on the integrated scaffold strategy. STATEMENT OF SIGNIFICANCE: Clinical microfracture treatment plays a certain role on the restoration of injured cartilage, but the regenerative cartilage is prone to be fibrocartilage due to the modulation of bone marrow cells. Herein, we design a trilaminar osteochondral scaffold with a selective permeable film in middle isolation layer. This specific film made of dense electrospun nanofiber can prevent bone marrow cells from invading into the cartilage layer, but allow the nutrients and cytokines to penetrate. Our conclusion is that the cartilage remodeling will be extremely inhibited when the bone marrow cells are blocking. Owing to the diverse cells in bone marrow, we will further explore the influence of each cell type on cartilage repair in our continuous future work.

Integrated polycaprolactone microsphere-based scaffolds with biomimetic hierarchy and tunable vascularization for osteochondral repair.

Osteochondral lesion potentially causes a variety of joint degenerative diseases if it cannot be treated effectively and timely. Microfracture as the conservative surgical choice achieves limited results for the larger defect whereas cartilage patches trigger integrated instability and cartilage fibrosis. To tackle aforementioned issues, here we explore to fabricate an integrated osteochondral scaffold for synergetic regeneration of cartilage and subchondral bone in one system. On the macro level, we fabricated three integrated scaffolds with distinct channel patterns of Non-channel, Consecutive-channel and Inconsecutive-channel via Selective Laser Sintering (SLS). On the micro level, both cartilage zone and subchondral bone zone of integrated scaffold were made of small polycaprolactone (PCL) microspheres and large PCL microspheres, respectively. Our findings showed that Inconsecutive-channel scaffolds possessed integrated hierarchical structure, adaptable compression strength, gradient interconnected porosity. Cartilage zone presented a dense phase for the inhibition of vessel invasion while subchondral bone zone generated a porous phase for the ingrowth of bone and vessel. Both cartilage regeneration and subchondral bone remodeling in the group of Inconsecutive-channel scaffolds have been demonstrated by histological evaluation and immunofluorescence staining in vivo. Consequently, our current work not only achieves an effective and regenerative microsphere scaffold for osteochondral reconstruction, but also provides a feasible methodology to recover injured joint through integrated design with diverse hierarchy. STATEMENT OF SIGNIFICANCE: Recovery of osteochondral lesion highly depends on hierarchical architecture and tunable vascularization in distinct zones. We therefore design a special integrated osteochondral scaffold with inconsecutive channel structure and vascularized modulation. The channel pattern impacts on mechanical strength and the infiltration of bone marrow, and eventually triggers synergetic repair of osteochondral defect. The cartilage zone of integrated scaffolds consisted of small PCL microspheres forms a dense phase for physical restriction of vascularized infiltration whereas the subchondral bone zone made of large PCL microspheres generates porous trabecula-like structure for promoting vascularization. Consequently, the current work indicates both mechanical adaptation and regional vascularized modulation play a pivotal role on osteochondral repair.

Progenitor cell-derived exosomes endowed with VEGF plasmids enhance osteogenic induction and vascular remodeling in large segmental bone defects.

Large segmental bone regeneration remains a great challenge due to the lack of vascularization in newly formed bone. Conventional strategies primarily combine bone scaffolds with seed cells and growth factors to modulate osteogenesis and angiogenesis. Nevertheless, cell-based therapies have some intrinsic issues regarding immunogenicity, tumorigenesis, bioactivity and off-the-shelf transplantation. Exosomes are nano-sized (50-200 nm) extracellular vesicles with a complex composition of proteins, nucleic acids and lipids, which are attractive as therapeutic nanoparticles for disease treatment. Exosomes also have huge potential as desirable drug/gene delivery vectors in the field of regenerative medicine due to their excellent biocompatibility and efficient cellular internalization. Methods: We developed a cell-free tissue engineering system using functional exosomes in place of seed cells. Gene-activated engineered exosomes were constructed by using ATDC5-derived exosomes to encapsulate the VEGF gene. The specific exosomal anchor peptide CP05 acted as a flexible linker and effectively combined the engineered exosome nanoparticles with 3D-printed porous bone scaffolds. Results: Our findings demonstrated that engineered exosomes play dual roles as an osteogenic matrix to induce the osteogenic differentiation of mesenchymal stem cells and as a gene vector to controllably release the VEGF gene to remodel the vascular system. In vivo evaluation further verified that the engineered exosome-mediated bone scaffolds could effectively induce the bulk of vascularized bone regeneration. Conclusion: In our current work, we designed specifically engineered exosomes based on the requirements of vascularized bone repair in segmental bone defects. This work simultaneously illuminates the potential of functional exosomes in acellular tissue engineering.

Exosome-mimetics as an engineered gene-activated matrix induces in-situ vascularized osteogenesis.

Exosome has been considered as an instructive supplement between complicated cell therapy and single gene/protein drug treatment in the field of regenerative medicine due to its excellent biocompatibility, efficient cellular internalization and large loading capacity. Nevertheless, one major issue that extremely restricts the potential application as gene/drug vehicles is the low yield of nanoscale exosome. Moreover, the intravenous injection of targeted exosomes may cause the obstruction of blood-rich organs. Thus, herein we fabricated a specific exosome-mimetics (EMs) that could come true mass and fast production exhibited the similar size, morphology and membrane protein markers in comparison with conventional exosomes. To bypass the risk of intravenous injection and improve the efficiency of topical therapy, we simultaneously applied the engineered EMs to design a gene-activated matrix (GAM) that could be locally released by encapsulating the plasmid of vascular endothelial growth factor (VEGF) and flexibly binding onto a core-shell nanofiber film. Our findings showed that the well-designed engineered EMs-mediated GAM was able to sustainably deliver VEGF gene and significantly enhance the vascularized osteogenesis in vivo. The current work can not only consolidate the applied foundation of EMs through the breakthrough of high yield, but also provide a local and effective delivery of engineered EMs for the in-situ therapy.

Hematoxylin and eosin staining of intact tissues via delipidation and ultrasound.

Acquiring information on the precise distribution of a tumor is essential to evaluate intratumoral heterogeneity. Conventional hematoxylin and eosin staining, which has been used by pathologists for more than 100 years, is the gold standard of tumor diagnosis. However, it is difficult to stain entire tumor tissues with hematoxylin and eosin and then acquire the three-dimensional distribution of cells in solid tumors due to difficulties in the staining and rinsing. In this paper, we propose a modified hematoxylin and eosin staining method, in which delipidation and ultrasound waves were applied to enhance tissue permeability and accelerate dye diffusion. This improved hematoxylin and eosin staining method is termed iHE (intact tissue hematoxylin and eosin staining). We applied the iHE method to stain intact organs of mice, which were then sectioned and imaged sequentially. The results showed that the whole tissue was stained homogeneously. Combined with micro-optical sectioning tomography (MOST), the iHE method can be used for 3D volume imaging and to evaluate the intratumoral heterogeneity of the entire tumor tissue spatially. Therefore, this method may help to accurately diagnose the invasion stage of tumors and guide clinical treatments.