RESUMEN
Polymeric materials such as fabric and foam have high flammability which limits their application in the field of fire protection. To this end, an organic-inorganic polymer colloid constructed from carboxymethyl chitosan and ammonium polyphosphate was used to improve the flame retardancy of flax fabric (FF) and rigid polyurethane foam (RPUF) based on a "one for two" strategy. The modification processes of FF and RPUF relied on pad-dry-cure method and UV-curing technology, respectively, and the modified FF and RPUF were severally designated as CMC/APP-FF and RFR-RPUF. Flame retardancy studies showed that CMC/APP-FF and RFR-RPUF exhibited limiting oxygen index values as high as 39.4 % and 42.6 %, respectively, and both achieved self-extinguishing behavior when external ignition source was removed. Thermogravimetric analysis and cone calorimetry test confirmed that CMC/APP-FF and RFR-RPUF had good charring ability and demonstrated reduced peak heat release rate values of 90.1 % and 10.8 %, respectively, distinct from before they were modified. In addition, condensed phase analysis showed that after burning, CMC/APP-FF became an integration char structure, whereas RFR-RPUF turned into a sandwiched char structure. In summary, the "one for two" strategy reported in this work provides a new insight into the economical fabrication of flame-retardant polymeric materials.
Asunto(s)
Coloides , Retardadores de Llama , Lino , Poliuretanos , Poliuretanos/química , Lino/química , Coloides/química , Quitosano/química , Quitosano/análogos & derivados , Textiles , Polímeros/química , Polifosfatos/químicaRESUMEN
The integration of two-dimensional Ti3C2Tx nanosheets and other materials offers broader application options in the antibacterial field. Ti3C2Tx-based composites demonstrate synergistic physical, chemical, and photodynamic antibacterial activity. In this review, we aim to explore the potential of Ti3C2Tx-based composites in the fabrication of an antibiotic-free antibacterial agent with a focus on their systematic classification, manufacturing technology, and application potential. We investigate various components of Ti3C2Tx-based composites, such as metals, metal oxides, metal sulfides, organic frameworks, photosensitizers, etc. We also summarize the fabrication techniques used for preparing Ti3C2Tx-based composites, including solution mixing, chemical synthesis, layer-by-layer self-assembly, electrostatic assembly, and three-dimensional (3D) printing. The most recent developments in antibacterial application are also thoroughly discussed, with special attention to the medical, water treatment, food preservation, flexible textile, and industrial sectors. Ultimately, the future directions and opportunities are delineated, underscoring the focus of further research, such as elucidating microscopic mechanisms, achieving a balance between biocompatibility and antibacterial efficiency, and investigating effective, eco-friendly synthesis techniques combined with intelligent technology. A survey of the literature provides a comprehensive overview of the state-of-the-art developments in Ti3C2Tx-based composites and their potential applications in various fields. This comprehensive review covers the variety, preparation methods, and applications of Ti3C2Tx-based composites, drawing upon a total of 171 English-language references. Notably, 155 of these references are from the past five years, indicating significant recent progress and interest in this research area.
Asunto(s)
Antibacterianos , Titanio , Antibacterianos/farmacología , Antibacterianos/química , Antibacterianos/síntesis química , Titanio/química , Titanio/farmacología , Humanos , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacologíaRESUMEN
A series of novel binuclear PNP ligands based on the cyclohexyldiamine scaffold were synthesized for this study. The experimental results showed that positioning the two PNP sites at the para-positions of the cyclohexyl framework led to a significant enhancement in the catalytic activity for selective tri/tetramerization of ethylene. The PNP/Cr(acac)3/MAO(methylaluminoxane) catalytic system exhibited relatively high catalytic activity (up to 3887.7 kg·g-1·h-1) in selective ethylene oligomerization with a total selectivity of 84.5% for 1-hexene and 1-octene at 40 °C and 50 bar. The relationship between the ligand structure and ethylene oligomerization performance was further explored using density functional theory calculations.
RESUMEN
Prior studies on photonic pigments of amphiphilic bottlebrush block copolymers (BBCPs) through an organized spontaneous emulsification (OSE) mechanism have been limited to using polyethylene glycol (PEG) as the hydrophilic side chains and toluene as the organic phase. Herein, a family of polystyrene-block-polyvinylpyrrolidone (PS-b-PVP) BBCPs are synthesized with PVP as the hydrophilic block. Biocompatible and sustainable anisole is employed for dissolving the obtained BBCPs followed by emulsification of the solutions in water. Subsequent evaporation of oil-in-water emulsion droplets triggers the OSE mechanism, producing thermodynamically stable water-in-oil-in-water (w/o/w) multiple emulsions with uniform and closely packed internal droplet arrays through the assembly of the BBCPs at the w/o interface. Upon solidification, the homogeneous porous structures are formed within the photonic microparticles that exhibit visible structural colors. The pore diameter is widely tunable (150â¼314 nm) by changing the degree of polymerization of BBCP (69â¼110), resulting in tunable colors across the whole visible spectrum. This work demonstrates useful knowledge that OSE can be generally used in the fabrication of ordered porous materials with tunable internal functional groups, not only for photonic applications, but also offers a potential platform for catalysis, sensing, separation, encapsulation, etc.
RESUMEN
Investigations of host-guest interactions at water-oil (w/o) interfaces are limited in single emulsion systems producing simple self-assembled objects with limited uses. Here, within hierarchically ordered water-in-oil-in-water (w/o/w) multiple emulsion droplets, interfacial self-assembly of (polynorbornene-graft-polystyrene)-block-(polynorbornene-graft-polyethylene glycol) (PNPS-b-PNPEG) bottlebrush block copolymers can be precisely controlled through host-guest interactions. α-Cyclodextrin (α-CD) in the aqueous phase can thread onto PEG side chains of the bottlebrush surfactants adsorbed at the w/o interface, leading to dehydration and collapsed chain conformation of the PEG block. Consequently, spherical curvature of the w/o internal droplets increases with the increased asymmetry of the bottlebrush molecules, producing photonic supraballs with precisely tailored structural parameters as well as photonic bandgaps. This work provides a simple but highly effective strategy for precise manipulation of complex emulsion systems applicable in a variety of applications, such as photonic pigments, cosmetic products, pesticides, artificial cells, etc.
RESUMEN
Quantum annealing, which involves quantum tunnelling among possible solutions, has state-of-the-art applications not only in quickly finding the lowest-energy configuration of a complex system, but also in quantum computing. Here we report a single-crystal study of the frustrated magnet α-CoV2O6, consisting of a triangular arrangement of ferromagnetic Ising spin chains without evident structural disorder. We observe quantum annealing phenomena resulting from time-reversal symmetry breaking in a tiny transverse field. Below ~ 1 K, the system exhibits no indication of approaching the lowest-energy state for at least 15 hours in zero transverse field, but quickly converges towards that configuration with a nearly temperature-independent relaxation time of ~ 10 seconds in a transverse field of ~ 3.5 mK. Our many-body simulations show qualitative agreement with the experimental results, and suggest that a tiny transverse field can profoundly enhance quantum spin fluctuations, triggering rapid quantum annealing process from topological metastable Kosterlitz-Thouless phases, at low temperatures.
RESUMEN
The process of diabetic wound healing was influenced by the excessive proliferation of reactive oxygen species (ROS). Therefore, in the process of healing diabetic wounds, it was crucial to removing ROS. This study designed composited nanoparticles: KBP, consisted by Konjac glucomannan, bovine serum albumin, and Prussian blue. Then they were embedded in Konjac glucomannan and hydroxypropyl trimethylammonium chloride chitosan composite hydrogel (KH), The KBP@KH hydrogel finally achieved excellent efficacy in diabetic wound healing. The in vitro and in vivo experiments demonstrated that KPB nanoparticles exhibited favorable ROS scavenging capability and biosafety. The KBP@KH hydrogel not only effectively eliminated ROS from diabetic wounds, but also exhibited excellent wound adaptability. The KBP@KH hydrogel facilitated angiogenesis and suppressed the production of inflammatory factors. Overall, the KBP@KH hydrogel dressing was characterized by its user-friendly nature, safety, and high efficiency.
Asunto(s)
Antioxidantes , Diabetes Mellitus Experimental , Ferrocianuros , Hidrogeles , Mananos , Nanocompuestos , Especies Reactivas de Oxígeno , Albúmina Sérica Bovina , Cicatrización de Heridas , Animales , Bovinos , Humanos , Masculino , Ratones , Ratas , Antioxidantes/farmacología , Antioxidantes/química , Vendajes , Quitosano/química , Quitosano/análogos & derivados , Quitosano/farmacología , Diabetes Mellitus Experimental/tratamiento farmacológico , Ferrocianuros/química , Ferrocianuros/farmacología , Depuradores de Radicales Libres/farmacología , Depuradores de Radicales Libres/química , Hidrogeles/química , Hidrogeles/farmacología , Mananos/química , Mananos/farmacología , Nanocompuestos/química , Especies Reactivas de Oxígeno/metabolismo , Albúmina Sérica Bovina/química , Cicatrización de Heridas/efectos de los fármacosRESUMEN
Pathogenic variants in the DES gene clinically manifest as progressive skeletal muscle weakness, cardiomyopathy with associated severe arrhythmias, and respiratory insufficiency, and are collectively known as desminopathies. While most DES pathogenic variants act via a dominant mechanism, recessively acting variants have also been reported. Currently, there are no effective therapeutic interventions for desminopathies of any type. Here, we report an affected individual with rapidly progressive dilated cardiomyopathy, requiring heart transplantation at age 13 years, in the setting of childhood-onset skeletal muscle weakness. We identified biallelic DES variants (c.640-13 T>A and c.1288+1 G>A) and show aberrant DES gene splicing in the affected individual's muscle. Through the generation of an inducible lentiviral system, we transdifferentiated fibroblast cultures derived from the affected individual into myoblasts and validated this system using RNA sequencing. We tested rationally designed, custom antisense oligonucleotides to screen for splice correction in these transdifferentiated cells and a functional minigene splicing assay. However, rather than correctly redirecting splicing, we found them to induce undesired exon skipping. Our results indicate that, while an individual precision-based molecular therapeutic approach to splice-altering pathogenic variants is promising, careful preclinical testing is imperative for each novel variant to test the feasibility of this type of approach for translation.
Asunto(s)
Cardiomiopatías , Cardiomiopatía Dilatada , Adolescente , Humanos , Cardiomiopatías/genética , Cardiomiopatía Dilatada/genética , Mutación , Empalme del ARN/genéticaRESUMEN
Photocatalytic technology for inactivating bacteria in water has received much attention. In this study, we reported a dark-light dual-mode sterilized g-C3N4/chitosan/poly (vinyl alcohol) hydrogel (g-CP) prepared through freeze-thaw cycling and an in situ electron-beam radiation method. The structures and morphologies of g-CP were confirmed using Fourier infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), solid ultraviolet diffuse reflectance spectroscopy (UV-vis DRS), and Brunauer-Emmett-Teller (BET). Photocatalytic degradation experiments demonstrated that 1 wt% g-CP degraded rhodamine B (RhB) up to 65.92% in 60 min. At the same time, g-CP had good antimicrobial abilities for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) within 4 h. The shapes of g-CP were adjustable (such as bar, cylinder, and cube) and had good mechanical properties and biocompatibility. The tensile and compressive modulus of 2 wt% g-CP were 0.093 MPa and 1.61 MPa, respectively. The Cell Counting Kit-8 (CCK-8) test and Hoechst33342/PI double staining were used to prove that g-CP had good biocompatibility. It is expected to be applied to environmental sewage treatment and wound dressing in the future.
Asunto(s)
Escherichia coli , Staphylococcus aureus , Nanogeles , Electrones , Microscopía Electrónica de RastreoRESUMEN
Previous work has indicated that aluminum (Al) complexes supported by a bipyridine bisphenolate (BpyBph) ligand exhibit higher activity in the ring-opening copolymerization (ROCOP) of maleic anhydride (MAH) and propylene oxide (PO) than their salen counterparts. Such a ligand effect in Al-catalyzed MAH-PO copolymerization reactions has yet to be clarified. Herein, the origin and applicability of the ligand effect have been explored by density functional theory, based on the mechanistic analysis for chain initiation and propagation. We found that the lower LUMO energy of the (BpyBph)AlCl complex accounts for its higher activity than the (salen)AlCl counterpart in MAH/epoxide copolymerizations. Inspired by the ligand effect, a structure-energy model was further established for catalytic activity (TOF value) predictions. It is found that the LUMO energies of aluminum chloride complexes and their average NBO charges of coordinating oxygen atoms correlate with the catalytic activity (TOF value) of Al complexes (R2 value of 0.98 and '3-fold' cross-validation Q2 value of 0.88). This verified that such a ligand effect is generally applicable in anhydride/epoxide ROCOP catalyzed by aluminum complex and provides hints for future catalyst design.
RESUMEN
A stereoselective and environmentally friendly thiolation of terminal alkynes was reported. Thiuram disulfide reagents (tetramethylthiuram disulfide and tetraethylthiuram disulfide) that reacted with alkynes in dimethyl sulfoxide (DMSO)/H2O could give (Z)-vinyl sulfides in good yields (up to 88%). This protocol features broad substrate scope, good stereoselectivity, high atom economy, good yields, and is transition metal-free. Mechanistic studies revealed that water and DMSO served as hydrogen sources, which greatly highlighted the unique reactivity of this special reaction involving two H-atom donors.
RESUMEN
An urgently needed approach for the treatment of oral squamous cell carcinoma (OSCC) is the development of novel drug delivery systems that offer targeted specificity and minimal toxic side effects. In this study, we developed an injectable and temperature-sensitive composite hydrogel by combining mesoporous titanium dioxide nanoparticles (MTNs) with Poly(N-isopropylacrylamide) (PNIPAAM) hydrogel to serve as carriers for the model drug Astragalus polysaccharide (APS) using electron beam irradiation. The characteristics of MTNs, including specific surface area and pore size distribution, were analyzed, and the characteristics of MTNs-APS@Hyaluronic acid (HA), such as microscopic morphology, molecular structure, crystal structure, and loading efficiency, were examined. Additionally, the swelling ratio, gel fraction, and microscopic morphology of the composite hydrogel were observed. The in vitro cumulative release curve was plotted to investigate the sustained release of APS in the composite hydrogels. The effects on the proliferation, migration, and mitochondrial membrane potential of CAL-27 cells were evaluated using MTT assay, scratch test, and JC-1 staining. The results indicated successful preparation of MTNs with a specific surface area of 147.059 m2/g and an average pore diameter of 3.256 nm. The composite hydrogel displayed temperature-sensitive and porous characteristics, allowing for slow release of APS. Furthermore, it effectively suppressed CAL-27 cells proliferation, migration, and induced changes in mitochondrial membrane potential. The addition of autophagy inhibitors chloroquine (CQ) and 3-methyladenine (3-MA) attenuated the migration inhibition (p < 0.05).
RESUMEN
We propose the newly synthesizedß-BaNi3(VO4)2(OH)2(space group:R3â¾m) as a candidate for the spin-1 kagome Heisenberg antiferromagnet (KHA). The compound features a uniform kagome lattice of Ni2+(S= 1) ions with a large interlayer distance. High-field measurements at low temperatures reveal a susceptibility local minimum at â¼9 T, resembling a 1/3 magnetization plateau as predicted by the pureS= 1 KHA model. Below â¼6 K, approximately 1% of the spins exhibit spin-glass order, which may be attributed to the nanocrystalline grain size of â¼50 nm. Despite the antiferromagnetic exchange coupling strength of â¼7 K, the majority of spins remain disordered down to â¼0.1 K as indicated by the observed power-law behaviors in magnetic specific heatCmâT1.4. Our results demonstrate that the low-energy magnetic excitations inß-BaNi3(VO4)2(OH)2are gapless, which contradicts the current theoretical expectations of the ideal model.
RESUMEN
Granulocyte colony stimulating factor (G-CSF) is commonly used as adjunct treatment to hasten recovery from neutropenia following chemotherapy and autologous transplantation of hematopoietic stem and progenitor cells (HSPCs) for malignant disorders. However, the utility of G-CSF administration after ex vivo gene therapy procedures targeting human HSPCs has not been thoroughly evaluated. Here, we provide evidence that post-transplant administration of G-CSF impedes engraftment of CRISPR-Cas9 gene edited human HSPCs in xenograft models. G-CSF acts by exacerbating the p53-mediated DNA damage response triggered by Cas9- mediated DNA double-stranded breaks. Transient p53 inhibition in culture attenuates the negative impact of G-CSF on gene edited HSPC function. In contrast, post-transplant administration of G-CSF does not impair the repopulating properties of unmanipulated human HSPCs or HSPCs genetically engineered by transduction with lentiviral vectors. The potential for post-transplant G-CSF administration to aggravate HSPC toxicity associated with CRISPR-Cas9 gene editing should be considered in the design of ex vivo autologous HSPC gene editing clinical trials.
RESUMEN
Hydrogels are materials consisting of a network of hydrophilic polymers. Due to their good biocompatibility and hydrophilicity, they are widely used in biomedicine, food safety, environmental protection, agriculture, and other fields. This paper summarizes the typical complex materials of photocatalysts, photosensitizers, and hydrogels, as week as their antibacterial activities and the basic mechanisms of photothermal and photodynamic effects. In addition, the application of hydrogel-based photoresponsive materials in microbial inactivation is discussed, including the challenges faced in their application. The advantages of photosensitive antibacterial complex hydrogels are highlighted, and their application and research progress in various fields are introduced in detail.
RESUMEN
The development of a stable and highly active photocatalyst has garnered significant attention in the field of wastewater treatment. In this study, a novel technique involving a facile stirring method was devised to fabricate an array of g-C3N4/ZnO nanowire (ZnO NW) composites. Through the introduction of g-C3N4 to augment the generation of electron-hole pairs upon exposure to light, the catalytic efficacy of these composites was found to surpass that of the pristine ZnO NWs when subjected to simulated sunlight. The photocatalytic performance of a 20 mg·L-1 methylene blue solution was found to be highest when the doping rate was 25 wt%, resulting in a degradation rate of 99.1% after 60 min. The remarkable enhancement in catalytic efficiency can be ascribed to the emergence of a captivating hetero-junction at the interface of g-C3N4 and ZnO NWs, characterized by a harmoniously aligned band structure. This alluring arrangement effectively curtailed charge carrier recombination, amplified light absorption, and augmented the distinct surface area, culminating in a notable boost to the photocatalytic prowess. These findings suggest that the strategic engineering of g-C3N4/ZnO NW heterostructures holds tremendous promise as a pioneering avenue for enhancing the efficacy of wastewater treatment methodologies.
RESUMEN
Organic electrode materials for lithium-ion batteries have attracted significant attention in recent years. Polymer electrode materials, as compared to small-molecule electrode materials, have the advantage of poor solubility, which is beneficial for achieving high cycling stability. However, the severe entanglement of polymer chains often leads to difficulties in preparing nanostructured polymer electrodes, which is vital for achieving fast reaction kinetics and high utilization of active sites. This study demonstrates that these problems can be solved by the in situ electropolymerization of electrochemically active monomers in nanopores of ordered mesoporous carbon (CMK-3), combining the advantages of the nano-dispersion and nano-confinement effects of CMK-3 and the insolubility of the polymer materials. The as-prepared nanostructured poly(1-naphthylamine)/CMK-3 cathode exhibits a high active site utilization of 93.7%, ultrafast rate capability of 60 A g-1 (≈320 C), and an ultralong cycle life of 10000 cycles at room temperature and 45000 cycles at -15 °C. The study herein provides a facile and effective method that can simultaneously solve both the dissolution problem of small-molecule electrode materials and the inhomogeneous dispersion issue of polymer electrode materials.
RESUMEN
PURPOSE: The purpose of this study was to assess the effect of folic acid (FA) supplementation on colitis-associated colorectal cancer (CRC) using the azoxymethane/dextran sulfate sodium (AOM/DSS) model. METHODS: Mice were fed a chow containing 2 mg/kg FA at baseline and randomized after the first DSS treatment to receive 0, 2, or 8 mg/kg FA chow for 16 weeks. Colon tissue was collected for histopathological evaluation, genome-wide methylation analyses (Digital Restriction Enzyme Assay of Methylation), and gene expression profiling (RNA-Seq). RESULTS: A dose-dependent increase in the multiplicity of colonic dysplasias was observed, with the multiplicity of total and polypoid dysplasias higher (64% and 225%, respectively) in the 8 mg FA vs. the 0 mg FA group (p < 0.001). Polypoid dysplasias were hypomethylated, as compared to the non-neoplastic colonic mucosa (p < 0.05), irrespective of FA treatment. The colonic mucosa of the 8 mg FA group was markedly hypomethylated as compared to the 0 mg FA group. Differential methylation of genes involved in Wnt/ß-catenin and MAPK signaling resulted in corresponding alterations in gene expression within the colonic mucosa. CONCLUSIONS: High-dose FA created an altered epigenetic field effect within the non-neoplastic colonic mucosa. The observed decrease in site-specific DNA methylation altered oncogenic pathways and promoted colitis-associated CRC.
RESUMEN
Although titanium and titanium alloys have become the preferred materials for various medical implants, surface modification technology still needs to be strengthened in order to adapt to the complex physiological environment of the human body. Compared with physical or chemical modification methods, biochemical modification, such as the introduction of functional hydrogel coating on implants, can fix biomolecules such as proteins, peptides, growth factors, polysaccharides, or nucleotides on the surface of the implants, so that they can directly participate in biological processes; regulate cell adhesion, proliferation, migration, and differentiation; and improve the biological activity on the surface of the implants. This review begins with a look at common substrate materials for hydrogel coatings on implant surfaces, including natural polymers such as collagen, gelatin, chitosan, and alginate, and synthetic materials such as polyvinyl alcohol, polyacrylamide, polyethylene glycol, and polyacrylic acid. Then, the common construction methods of hydrogel coating (electrochemical method, sol-gel method and layer-by-layer self-assembly method) are introduced. Finally, five aspects of the enhancement effect of hydrogel coating on the surface bioactivity of titanium and titanium alloy implants are described: osseointegration, angiogenesis, macrophage polarization, antibacterial effects, and drug delivery. In this paper, we also summarize the latest research progress and point out the future research direction. After searching, no previous relevant literature reporting this information was found.
RESUMEN
Microspheres bearing large pores are useful in the capture and separation of biomolecules. However, pore size is typically poorly controlled, leading to disordered porous structures with limited performances. Herein, ordered porous spheres with a layer of cations on the internal surface of the nanopores are facilely fabricated in a single step for effective loading of DNA bearing negative charges. Triblock bottlebrush copolymers (BBCPs), (polynorbornene-g-polystyrene)-b-(polynorbornene-g-polyethylene oxide)-b-(polynorbornene-g-bromoethane) (PNPS-b-PNPEO-b-PNBr), are designed and synthesized for fabrication of the positively charged porous spheres through self-assembly and in situ quaternization during an organized spontaneous emulsification (OSE) process. Pore diameter as well as charge density increase with the increase of PNBr content, resulting in a significant increase of loading density from 4.79 to 22.5 ng µg-1 within the spheres. This work provides a general strategy for efficient loading and encapsulation of DNA, which may be extended to a variety of different areas for different real applications.