Improvement of liraglutide release from PLGA microspheres by a porous microsphere-gel composite system.

In the current work, we aimed to prepare a liraglutide-loaded porous microsphere-gel composite system. By employing polyethylene glycol (PEG) as a porogenic agent and poly (lactic-co-glycolic acid) copolymer (PLGA) as a carrier, the liraglutide microspheres were prepared and dispersed in a temperature-sensitive gel made of poloxamer 407 (F-127) and poloxamer 188 (F-68), which served as the gel matrix, to construct the composite system. The porous microsphere-gel composite system demonstrated prolonged and steady drug release, with a reduction to 4.7% in the initial release within 1 d, according to data from in vitro release tests. The drug release from the porous microspheres decreased from 53% to 29% during the rapid release phase as the PEG concentration increased and the release rate slowed down. In vivo experiments in rats revealed that the composite system prolonged the release period by about 10 d. The pharmacokinetic parameter AUC0-1 was decreased by 24.78 ng/ml*h, the initial burst release was decreased, and the blood drug concentration fluctuation was lessened. The construction of a porous microsphere-gel composite matrix offers a novel approach to the systems with a sustained, long-lasting release that utilizes rational design.

Preparation and evaluation of lactic acid acylated exenatide and its long-acting preparation.

Exenatide (EX), a glucagon-like peptide-1 receptor agonist, is used to treat diabetes mellitus. However, its short half-life necessitates frequent administration and fluctuations in its plasma concentration may cause adverse effects. Previously, we developed glycolic acid acylated EX, which showed a good glucose-lowering effect. However, the release of lactic acid (LA) acylated exenatide (LA-EX) as an acylated adduct in EX microspheres has not been studied. Here, we investigated the biological properties of LA-EX. Additionally, LA-EX-loaded microspheres were formulated by an emulsion-solvent evaporation method and their in vitro characteristics, in vivo pharmacokinetic properties, and antidiabetic activities were evaluated. Pharmacokinetic studies revealed that the t1/2 of LA-EX (5.95 h) was 2.3-fold longer than that of EX. The antidiabetic activities of LA-EX in db/db mice were similar to those of EX. LA-EX release from microspheres was fairly well-sustained compared to that of EX microspheres. Additionally, LA-EX-loaded microspheres were more effective in lowering nonfasting blood glucose concentrations than EX microspheres. These findings suggest that LA-EX have the same efficacy as EX and that encapsulating LA-EX into microspheres can achieve better efficacy for the long-term type 2 diabetes mellitus treatment.

Pore change during degradation of octreotide acetate-loaded PLGA microspheres: The effect of polymer blends.

The purpose of this study was to solve the plateau phase (the stage in which the drug in the microsphere undergoes a slow release or almost no release after initial release) problem by understanding the effect of polymer blends on the internal pore changes of the microspheres. This study used PLGA 5050 4H (F-1), PLGA 5050 1A: PLGA 5050 4H = 3:7 (F-2) and PLGA 7525 1A: PLGA 5050 4H = 3:7 (F-3) as a carrier, respectively. Microspheres (MS) were obtained by O/W emulsion solvent evaporation technique and characterized by scanning electron microscopy (SEM), particle size, drug loading, fluorescence characteristics, and in vitro and in vivo release. Accelerated tests in vitro showed that the size and number of core pores significantly affected drug release in the first and second phases. After intramuscular administration, F-2 and F-3 showed effective blood concentration levels and their bioavailability was higher than that of the RLD (Sandostatin Lar). In general, our data indicate that pore formation is unevenly distributed throughout PLGA MS prepared using polymer blends, and the use of polymer blends is instructive for the development of sustained smooth release microspheres. Therefore, the octreotide MS described in this study has a good clinical application potential for the treatment of acromegaly.

Modification of Three-Phase Drug Release Mode of Octreotide PLGA Microspheres by Microsphere-Gel Composite System.

In order to obtain sustained release of biodegradable microspheres, the purpose of this study was to design and characterize an injectable octreotide microsphere-gel composite system. The octreotide microspheres were prepared by phase separation method, which used PLGA as a carrier material, dimethyl silicone oil as a phase separation reagent, and n-heptane-Span 80 as a hardener. In addition, we used poloxamer 407 (PL 407) and poloxamer 188 (PL 188) as the thermosensitive gel matrix material. The composite system was obtained by scattering octreotide microspheres in a poloxamer gel. In vitro data showed that the release time of the composite system could last for about 50 days. Because of the blocking and control actions of the poloxamer gel, the initial burst release was significantly reduced and the plateau phase was eliminated. Pharmacokinetic data showed that the burst release of the composite system was significantly less than that of the microspheres, i.e., Cmax1 was reduced by about half. From day 2 to day 50, higher plasma concentration levels and more stable drug release behavior were exhibited. In addition, the good biocompatibility of the composite system in vivo was also demonstrated by hematoxylin-eosin (HE) staining. Therefore, the octreotide microsphere-gel composite system will be a new direction for hydrophilic polypeptide/protein-loaded sustained release dosage forms with high pharmacological activity.

Entecavir-loaded poly (lactic-co-glycolic acid) microspheres for long-term therapy of chronic hepatitis-B: Preparation and in vitro and in vivo evaluation.

To avoid severe exacerbations in the load of hepatitis B virus (HBV) as a consequence of discontinuous use of anti-HBV drugs, entecavir (ETV), the first-line anti-HBV drug, was primally formulated as extended-release poly (lactic-co-glycolic acid) microspheres in the present study. Because ETV is slightly soluble in water and in some other organic solvents used for microsphere preparation, methods for solid-microencapsulation were employed to fabricate the ETV microspheres. The optimized microspheres were evaluated for their morphology, particle size, drug loading, in vitro drug release, and in vivo pharmacokinetics in rats. The optimized formulation was found to have a mean particle size of 86 µm and drug loading of 13%. Differential scanning calorimetry and powder X-ray diffraction indicated that ETV existed in crystal, amorphous, and molecular states in the microspheres. In vitro and in vivo release revealed that the dissolution of ETV dominated the release process. The morphology of the microspheres and changes in the morphology during in vitro release were assessed by scanning electron microscopy. The novel ETV-MS described in this study should have great potential for clinical use as an alternative treatment against HBV.

Synthesis, Characterization and In Vitro Evaluation of Dual pH/Redox Sensitive Marine Laminarin-Based Nanomedicine Carrier Biomaterial for Cancer Therapy.

In order to improve the anti-cancer therapy efficiency of hydrophobic drugs such as curcumin (Cur), a novel dual pH/redox sensitive marine laminarin-based nanomedicine carrier biomaterial with photo-dynamic therapy (PDT) was synthesized in this study. The new synthetic chemical structure, named as Hematin-Laminarin-Dithiodipropionic Acid-MGK (HLDM), was characterized by 1H-NMR and IR. The Cur-loaded micelles were then prepared via dialysis method. The HLDM could self-assemble into micelles in water with hydrodynamic diameter of 135±15 nm. The particle size, zeta potential and morphology of micelles were detected by transmission electron microscope (TEM). Interestingly, the in vitro release experiment showed that the release amount of Cur-loaded HLDM micelles could reach 80% in the pH and redox sensitive environment. Furthermore, cell study showed that the Cur-loaded HLDM micelles had stronger cellular uptake and cytotoxicity to MCF-7 cells than that of HLDM. The multifunctional marine laminarin based nanomedicine carrier biomaterial can be used for new drug delivery systems with dual pH/redox sensitivity for cancer therapy.

Preparation and evaluation of rotigotine-loaded implant for the treatment of Parkinson's disease and its evolution study.

PURPOSE: To develop rotigotine-loaded implants (RI) to achieve continuous release of rotigotine for long duration for the treatment of Parkinson's disease (PD). METHODS: RI was prepared by hot-melt extrusion method using poly (lactide-co-glycolide) (PLGA) as the matrix. In vitro drug release was optimized by drug loading, melting temperature during preparing process and additives. The surface and internal morphology of RI was imaged by SEM. The in vivo release profile of RI was investigated on rat. RESULTS: RI prepared with PLGA 7525 5A showed sustained release of 40 days while suffering a lag phase, which was significantly shortened by blending 5050 2A and mannitol in the matrix. RI prepared by 7525 5A/5050 2A/mannitol = 55:10:5 (rotigotine 30%) showed a 40-day sustained release in vivo with no lag phase. The drug release from RI was also affected by drug loading and melting temperature probably due to the drug state existed in the implant. The evolution of implants during release process was correlated well with the drug release kinetics. CONCLUSION: RI could achieve sustained drug release for 40 days which could supply an alternative of continuous dopaminergic stimulation (CDS) for the treatment of PD.

Effect of palmitic acid on the characteristics and release profiles of rotigotine-loaded microspheres.

BACKGROUND: The initial burst release is a major obstacle to the development of microsphere-formulated drug products. PURPOSE: To investigate the influence of palmitic acid on the characteristics and release profiles of rotigotine-loaded poly(d,l-lactide-co-glycolide) microspheres. MATERIALS AND METHODS: Rotigotine-loaded microspheres (RMS) were prepared using the oil-in-water emulsion solvent evaporation technique. The in vitro characteristics of the RMS were evaluated with scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and a particle size analyzer. The in vitro drug release and in vivo pharmacokinetics of the RMS were investigated. RESULTS AND DISCUSSION: The SEM results showed that the addition of palmitic acid changed the surface morphology of the microspheres from smooth to dimpled and then to non-smooth as the palmitic acid content increased. DSC revealed the existence of molecularly dispersed forms of palmitic acid in the microspheres. The in vitro and in vivo release profiles indicated that the addition of 5% and 8% palmitic acid significantly decreased the burst release of rotigotine from the microspheres, and the late-stage release was delayed as the palmitic acid content increased across the investigated range (5-15%). CONCLUSION: The addition of palmitic acid to the microspheres significantly affects the release profile of rotigotine from RMS.

Application of hot-melt extrusion technology for designing an elementary osmotic pump system combined with solid dispersion for a novel poorly water-soluble antidepressant.

TP1 is a novel antidepressant with poor solubility. To reduce fluctuations in blood concentration and increase oral bioavailability, a controlled-release system was developed by combining a solid dispersion (SD) and an elementary osmotic pump (EOP). The study compared different methods of preparing SDs. Hot-melt extrusion (HME) exhibited clear advantages over the traditional melting technique. An in vitro release study demonstrated that HME-EOP tablets released TP1 in a zero-order manner over 12 h and the drug release was in dependent of the release medium and agitation speed, whereas release from molten-EOP tablets lasted only 8 h. In contrast to immediate-release tablets, the HME-EOP tablets exhibited less fluctuation in blood concentration and higher bioavailability in vivo. In summary, the osmotic pump system combined with an HME-based SD of TP1 presented controlled release in vitro, high bioavailability in vivo and a good in vivo-in vitro correlation.

The glucose-lowering potential of exenatide delivered orally via goblet cell-targeting nanoparticles.

PURPOSE: Exenatide, a potent insulinotropic agent, can be used for the treatment of non-insulin-dependent diabetes mellitus. However, the need for frequent injections seriously limits its therapeutic utility. The aim of present report was to develop an orally available exenatide formulation using goblet cell-targeting nanoparticles (NPs). METHOD: The exenatide-loaded nanoparticles were prepared with modified chitosan which was conjugated with a goblet cell-target peptide, CSKSSDYQC (CSK) peptide. RESULTS: The CSK-chitosan nanoparticles shown reduced chitosan toxicity and enhanced the permeation of drugs across the Caco-2/HT-29 co-cultured cell monolayer, which simulated the intestinal epithelium. Following the oral administration of near-infrared fluorescent probe Cy-7-loaded NPs to mice, the distribution of the drugs was investigated with a near-infrared in vivo image system (FX Pro, Bruker, USA). The results showed that Cy-7 fluorescence disseminated from the oesophagus, then to stomach and small intestine and then was absorbed into hepatic, finally into the bladder; over time, Cy-7 was metabolized and excreted. The bioavailability of the modified nanoparticles was found to be 1.7-fold higher compared with the unmodified ones, and the hypoglycemic effect was also better. CONCLUSION: CSK peptide-modified chitosan nanoparticles could be a potential therapeutics for Type II diabetes patients.

Acylation of exenatide by glycolic acid and its anti-diabetic activities in db/db mice.

PURPOSE: To prepare acylated exenatide analogues and investigate their biological properties for guiding the development of PLGA formulations of exenatide. METHODS: The acylated exenatide analogues were prepared by reaction with glycolic acid (GA), one constitutional unit of PLGA, and characterized by HPLC-MS/MS and Circular Dichroism (CD). The pharmacokinetic properties and anti-diabetic activities were studied in SD rats and db/db mice, respectively. RESULTS: Structural characterizations of the acylated products showed that one to four glycolic acids (GAs) were connected to the primary amine groups of exenatide, and there was a conversion of α-helix to ß-sheet to some extent. Pharmacokinetic studies in SD rats revealed that acylated exenatides had a similar Tmax with that of the prototype drug, whereas the Cmax and the AUC values of the adducts were significantly decreased. Biological activity tests demonstrated that exenatide and acylated exenatide analogues had similar in vivo antidiabetic activities in terms of controlling blood glucose concentration, HbA1c level, body weight and food intake. CONCLUSIONS: These findings suggest that GA conjugated exenatide had no influence on the peptide efficacy, therefore it's not necessary to inhibit exenatide acylation in PLGA formulations during the peptide release process.

Preparation and characterization of sustained-release rotigotine film-forming gel.

OBJECTIVE: The aim of this study was to develop a film-forming gel formulation of rotigotine with hydroxypropyl cellulose (HPC) and Carbomer 934. To optimize this formulation, we applied the Response Surface Analysis technique and evaluated the gel's pharmacokinetic properties. METHODS: The factors chosen for factorial design were the concentration of rotigotine, the proportion of HPC and Carbomer 934, and the concentration of ST-Elastomer 10. Each factor was varied over three levels: low, medium and high. The gel formulation was evaluated and optimized according to its accumulated permeation rate (Flux) through Franz-type diffusion. A pharmacokinetic study of rotigotine gel was performed with rabbits. RESULTS: The Flux of the optimized formulation reached the maximum (199.17 µg/cm(2)), which was 3% rotigotine and 7% ST-Elastomer 10 with optimal composition of HPC: Carbomer 934 (5:1). The bioavailability of the optimized formulation compared with intravenous administration was approximately 20%. CONCLUSION: A film-forming gel of rotigotine was successfully developed using the response surface analysis technique. The results of this study may be helpful in finding an optimum formulation for transdermal delivery of a drug. The product may improve patients' compliance and provide better efficacy.

Stability of exenatide in poly(D,L-lactide-co-glycolide) solutions: a simplified investigation on the peptide degradation by the polymer.

A solution model can be used to elucidate drug stability issues in a complex system. The aim of this study was to investigate the interaction between poly(D,L-lactide-co-glycolide) (PLGA) and exenatide in organic solvent-acetate buffer saline (ABS) solutions. The effect of solvent composition on exenatide stability was investigated first. In the selected 90:10 dimethyl sulfoxide (DMSO):ABS solution, exenatide stability was examined as a function of PLGA comonomer ratios, molecular weight (Mw) and concentrations. The specific rotation analysis and second derivative UV absorbance spectroscopy were used to monitor the variation of exenatide higher order structure. The effect of ABS pH on the interaction was also investigated. Exenatide degradation products were characterized by HPLC-MS/MS. It was found that exenatide was relatively stable in glacial acetic acid (HAc)-ABS solutions, whereas DMSO content had a strong influence on the conformation state and stability of exenatide. PLGA 50:50 promoted exenatide degradation more than PLGA 75:25 and poly(D,L-lactide) (PLA). Lower Mw and higher concentration of PLGA were beneficial for exenatide degradation. Exenatide was more stable in 90:10 DMSO:ABS (pH 3.0) solution than in 90:10 DMSO:ABS (pH 4.5 and 3.0) solutions during the incubation. HPLC-MS/MS analysis of exenatide demonstrated that acylation was the main degradation route of the peptide.

Effect of water on exenatide acylation in poly(lactide-co-glycolide) microspheres.

Peptide or protein degradation often occurs when water flows into the dosage form. The aim of this study was to investigate the effect of water on exenatide acylation in poly(lactide-co-glycolide) (PLGA) microspheres. Exenatide-loaded PLGA microspheres were incubated at different relative humidities (RH) as well as in solutions of different pH for 20 days. The stability of exenatide was monitored using HPLC and HPLC-MS analysis. The alteration of exenatide conformation caused by water was investigated by FT-IR spectroscopy. Exenatide and glycolide were incubated in DMSO-water solutions to verify the effect of exenatide conformation state on the peptide acylation. Exenatide was relatively stable in microspheres at lower RH, and the absorbed water could act as a plasticizer and thus promote the peptide acylation by PLGA. However, when the microspheres were incubated at 100% RH, the excessively absorbed water could cause conformation recovery of exenatide and play an inhibitory effect on acylation. The formation of acylated exenatide incubated in acetate buffer saline of pH 6.0 was more than that of pH 4.5 and 3.0. Stability studies of exenatide in glycolide solutions showed that exenatide in nonnative monomer state was easier to be acylated by eletrophiles than that in aggregation state.

Novel chitosan derivative for temperature and ultrasound dual-sensitive liposomal microbubble gel.

In this study, a novel liposome-loaded microbubble gel based on N-cholesteryl hemisuccinate-O-sulfate chitosan (NCHOSC) was designed. The structure of the NCHOSC was characterized by FTIR and (1)H NMR. The liposomal microbubble gel based on NCHOSC with a high encapsulation efficiency of curcumin was formed and improved the solubility of curcumin. The diameter of most liposomal microbubble was about 950 nm. The temperature-sensitive CS/GP gel could be formulated at room temperature and would form a gel at body temperature. Simultaneously, the ultrasound-sensitive induced release of curcumin was 85% applying ultrasound. The results of cytotoxicity assay indicated that encapsulated curcumin in Cur-LM or Cur-LM-G was less toxic. The anti-tumor efficacy in vivo suggested that Cur-LM-G by ultrasound suppressed tumor growth most efficiently. These findings have shed some light on the potential NCHOSC material used to liposome-loaded microbubble gel for temperature and ultrasound dual-sensitive drug delivery.

Improvement of in vivo efficacy of recombinant human erythropoietin by encapsulation in PEG-PLA micelle.

To improve the pharmacokinetics and stability of recombinant human erythropoietin (rhEPO), rhEPO was successfully formulated into poly(ethylene glycol)-poly(d,l-lactide) (PEG-PLA) di-block copolymeric micelles at diameters ranging from 60 to 200 nm with narrow polydispersity indices (PDIs; PDI < 0.3) and trace amount of protein aggregation. The zeta potential of the spherical micelles was in the range of -3.78 to 4.65 mV and the highest encapsulation efficiency of rhEPO in the PEG-PLA micelles was about 80%. In vitro release profiles indicated that the stability of rhEPO in the micelles was improved significantly and only a trace amount of aggregate was found. Pharmacokinetic studies in rats showed highly enhanced plasma retention time of the rhEPO-loaded PEG-PLA micelles in comparison with the native rhEPO group. Increased hemoglobin concentrations were also found in the rat study. Native polyacrylamide gel electrophoresis results demonstrated that rhEPO was successfully encapsulated into the micelles, which was stable in phosphate buffered saline with different pHs and concentrations of NaCl. Therefore, PEG-PLA micelles can be a potential protein drug delivery system.

pH and temperature dual-sensitive liposome gel based on novel cleavable mPEG-Hz-CHEMS polymeric vaginal delivery system.

BACKGROUND: In this study, a pH and temperature dual-sensitive liposome gel based on a novel cleavable hydrazone-based pH-sensitive methoxy polyethylene glycol 2000-hydrazone-cholesteryl hemisuccinate (mPEG-Hz-CHEMS) polymer was used for vaginal administration. METHODS: The pH-sensitive, cleavable mPEG-Hz-CHEMS was designed as a modified pH-sensitive liposome that would selectively degrade under locally acidic vaginal conditions. The novel pH-sensitive liposome was engineered to form a thermogel at body temperature and to degrade in an acidic environment. RESULTS: A dual-sensitive liposome gel with a high encapsulation efficiency of arctigenin was formed and improved the solubility of arctigenin characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. The dual-sensitive liposome gel with a sol-gel transition at body temperature was degraded in a pH-dependent manner, and was stable for a long period of time at neutral and basic pH, but cleavable under acidic conditions (pH 5.0). Arctigenin encapsulated in a dual-sensitive liposome gel was more stable and less toxic than arctigenin loaded into pH-sensitive liposomes. In vitro drug release results indicated that dual-sensitive liposome gels showed constant release of arctigenin over 3 days, but showed sustained release of arctigenin in buffers at pH 7.4 and pH 9.0. CONCLUSION: This research has shed some light on a pH and temperature dual-sensitive liposome gel using a cleavable mPEG-Hz-CHEMS polymer for vaginal delivery.

[Ocular pharmacokinetics of puerarin in anesthetic rabbits by microdialysis].

OBJECTIVE: To establish the model of microdialysis, and study the ocular pharmacokinetics of puerarin in anesthetic rabbits. METHOD: Implanted the probe into anterior chamber of anesthetic rabbit by surgery. After balanced for 2 h, 1% puerarin eye drop (100 microL) was applied into the cul-de-sac with micropipette. Immediately the dialysate was collected at different time and detected by HPLC with the detection wavelength of 249 nm. The mobile phase was methanol and 0.1% citric acid solution (30:70); the flow rate was 1.0 mL x min(-1). RESULT: After the administration, puerarin can be absorbed into aqueous humor quickly. The peak concentration of puerarin appeared at about 1 h and then reduced gradually. The peak concentration(C(max)) is (2.52 +/- 0.31) mg x L(-1). The other lower peak was shown at 3.5 h during the eliminate phase. This might be attributed to the inhibition of aqueous humor production by the puerarin and resulted in a high drug concentration. The area under concentration-time curve (AUC(0-t)) is (5.04 +/- 0.21) mg x h x L(-1) and the eliminate half life (t1/2) is (0.38 +/- 0.13) h. CONCLUSION: The microdialysis technique can be used to detect the ocular pharmacokinetics of puerarin, and support the valuable pharmacokinetics parameter for the clinical applications of puerarin eye drop.

Effects of a novel pH-sensitive liposome with cleavable esterase-catalyzed and pH-responsive double smart mPEG lipid derivative on ABC phenomenon.

BACKGROUND: The ABC phenomenon is described as a syndrome of accelerated clearance of polyethylene glycol (PEG)-modified liposomes from the bloodstream when repeatedly injected, with their increased accumulation in the liver and spleen. METHODS: To clarify this immune response phenomenon, we evaluated a novel modified pH-sensitive liposome with a cleavable double smart PEG-lipid derivative (mPEG-Hz-CHEMS). RESULTS: The ABC phenomenon in mice was brought about by repeated injection of conventional PEG-PE liposomes and was accompanied by a greatly increased uptake in the liver. However, a slight ABC phenomenon was brought about by repeated injection of mPEG-CHEMS liposomes and was accompanied by only a slightly increased uptake in the liver, and repeated injection of mPEG-Hz-CHEMS liposomes did not induce the ABC phenomenon and there was no increase in liver accumulation. This finding indicates that the cleavable mPEG-Hz-CHEMS derivative could lessen or eliminate the ABC phenomenon induced by repeated injection of PEGylated liposomes. CONCLUSION: This research has shed some light on a solution to the ABC phenomenon using a cleavable PEG-Hz-CHEMS derivative encapsulated in nanoparticles.

Effects of poly(amidoamine) dendrimers on ocular absorption of puerarin using microdialysis.

PURPOSE: The purpose of this study was to investigate the effects of poly(amidoamine) (PAMAM) dendrimers on ocular absorption of puerarin. METHODS: The samples of rabbits' aqueous humor were collected by in vivo microdialysis. The ocular pharmacokinetic properties of puerarin were measured to evaluate the effects of PAMAM dendrimers on ocular absorption of puerarin. RESULTS: In the pharmacokinetic studies, the AUC(0∼∞) values of puerarin solution with 0.2% (w/v) PAMAM dendrimers (G3.0, G4.0, G5.0) were greater than those in the control group by 2.3-, 3.5-, and 2.1-folds, respectively. The C(max) values of puerarin solution with 0.2% (w/v) PAMAM dendrimers were 1.5, 2.5, and 1.3 times the values of the control group and the t(1/2) values were significantly longer than that of control group. CONCLUSIONS: Using PAMAM dendrimers might be a promising strategy to enhance the absorption of puerarin. The generation of PAMAM dendrimers may play a key role in increasing the ocular absorption of puerarin.