RESUMEN
Plasmons have facilitated diverse analytical applications due to the boosting signal detectability by hot spots. In practical applications, it is crucial to fabricate straightforward, large-scale, and reproducible plasmonic substrates. Dewetting treatment, via applying direct thermal annealing of metal films, has been used as a straightforward method in the fabrication of such plasmonic nanostructures. However, tailoring the evolution of the dewetting process of metal films poses considerable experimental complexities, mainly due to nanoscale structure formation. Here, we use grazing-incidence small- and wide-angle X-ray scattering for the in situ investigation of the high-power impulse magnetron sputter deposition of Ag on self-assembled Au nanoparticle arrays at low-temperature dewetting conditions. This approach allows us to examine both the direct formation of binary Au/Ag nanostructure and the consequential impact of the dewetting process on the spatial arrangement of the bimetallic nanoparticles. It is observed that the dewetting at 100 °C is sufficient to favor the establishment of a homogenized structural configuration of bimetallic nanostructures, which is beneficial for localized surface plasmon resonances (LSPRs). The fabricated metal nanostructures show potential application for the surface-enhanced Raman scattering (SERS) detection of rhodamine 6G molecules. As SERS platform, bimetallic nanostructures formed with dewetting conditions turn out to be superior to those without dewetting conditions. The method in this work is envisioned as a facile strategy for the fabrication of plasmonic nanostructures.
RESUMEN
The genus Silurus, an important group of catfish, exhibits heterogeneous distribution in Eurasian freshwater systems. This group includes economically important and endangered species, thereby attracting considerable scientific interest. Despite this interest, the lack of a comprehensive phylogenetic framework impedes our understanding of the mechanisms underlying the extensive diversity found within this genus. Herein, we analyzed 89 newly sequenced and 20 previously published mitochondrial genomes (mitogenomes) from 13 morphological species to reconstruct the phylogenetic relationships, biogeographic history, and species diversity of Silurus. Our phylogenetic reconstructions identified eight clades, supported by both maximum-likelihood and Bayesian inference. Sequence-based species delimitation analyses yielded multiple molecular operational taxonomic units (MOTUs) in several taxa, including the Silurus asotus complex (four MOTUs) and Silurus microdorsalis (two MOTUs), suggesting that species diversity is underestimated in the genus. A reconstructed time-calibrated tree of Silurus species provided an age estimate of the most recent common ancestor of approximately 37.61 million years ago (Ma), with divergences among clades within the genus occurring between 11.56 Ma and 29.44 Ma, and divergences among MOTUs within species occurring between 3.71 Ma and 11.56 Ma. Biogeographic reconstructions suggested that the ancestral area for the genus likely encompassed China and the Korean Peninsula, with multiple inferred dispersal events to Europe and Central and Western Asia between 21.78 Ma and 26.67 Ma and to Japan between 2.51 Ma and 18.42 Ma. Key factors such as the Eocene-Oligocene extinction event, onset and intensification of the monsoon system, and glacial cycles associated with sea-level fluctuations have likely played significant roles in shaping the evolutionary history of the genus Silurus.
Asunto(s)
Bagres , Filogenia , Filogeografía , Animales , Bagres/genética , Bagres/clasificación , Genoma Mitocondrial , Variación Genética , Distribución AnimalRESUMEN
Die-sinking micro-electrical discharge machining (micro-EDM) is a potential method used to fabricate intricate structures without complex electrode motion planning and compensation. However, machining efficiency and poor discharge states are still bottlenecks. This study conducted a comparative investigation into the impact of ultrasonic vibration on die-sinking micro-EDM of polycrystalline diamond (PCD) and pure titanium (TA2). By adjusting discharge parameters, this study systematically evaluated the influence of ultrasonic vibration on these two materials based on discharge waveforms, motion trajectories, effective discharge counts and groove profiles. At an open-circuit voltage of 100 V, ultrasonic vibration promotes die-sinking micro-EDM of PCD. However, when the open-circuit voltage increases to 200 V, ultrasonic vibration exhibits inhibitory effects in general. Conversely, for TA2, ultrasonic vibration shows a promoting effect at both voltages, indicating the differences of ultrasonic vibration-assisted die-sinking micro-EDM on PCD and TA2. For PCD, ultrasonic cavitation improves the discharge gap environment, accelerating the removal of discharge debris. For TA2, due to its poor thermal conductivity, ultrasonic cavitation acts to break the arc, accelerating heat transfer. These research findings provide guidance for ultrasonic vibration-assisted die-sinking micro-EDM in industrial applications.
RESUMEN
Temporal interference (TI) electric field brain stimulation is a novel neuromodulation technique that enables the non-invasive modulation of deep brain regions, but few advances about TI stimulation effectiveness and mechanisms have been reported. Conventional transcranial alternating current stimulation (tACS) can enhance motor skills, whether TI stimulation has an effect on motor skills in mice has not been elucidated. In the present study, TI stimulation was proved to stimulating noninvasively primary motor cortex (M1) of mice, and that TI stimulation with an envelope wave frequency of 20 Hz (Δ f = 20 Hz) once a day for 20 min for 7 consecutive days significantly improved the motor skills of mice. The mechanism of action may be related to regulating of neurotransmitter metabolism, increasing the expression of synapse-related proteins, promoting neurotransmitter release, increasing dendritic spine density, enhancing the number of synaptic vesicles and the thickness of postsynaptic dense material, and ultimately enhance neuronal excitability and plasticity. It is the first report about TI stimulation promoting motor skills of mice and describing its mechanisms.
Asunto(s)
Corteza Motora , Destreza Motora , Plasticidad Neuronal , Estimulación Transcraneal de Corriente Directa , Animales , Corteza Motora/fisiología , Plasticidad Neuronal/fisiología , Ratones , Estimulación Transcraneal de Corriente Directa/métodos , Destreza Motora/fisiología , Masculino , Ratones Endogámicos C57BLRESUMEN
Sirtuins (SIRT1-SIRT7), as a family of NAD+-dependent protein modifying enzymes, have various catalytic functions, such as deacetylases, dealkalylases, and deribonucleases. The Sirtuins family is directly or indirectly involved in pathophysiological processes such as glucolipid metabolism, oxidative stress, DNA repair and inflammatory response through various pathways and assumes an important role in several cardiovascular diseases such as atherosclerosis, myocardial infarction, hypertension and heart failure. A growing number of studies supports that metabolic and bioenergetic reprogramming directs the sequential process of inflammation. Failure of homeostatic restoration leads to many inflammatory diseases, and that macrophages are the central cells involving the inflammatory response and are the main source of inflammatory cytokines. Regulation of cellular metabolism has emerged as a fundamental process controlling macrophage function, but its exact signaling mechanisms remain to be revealed. Understanding the precise molecular basis of metabolic control of macrophage inflammatory processes may provide new approaches for targeting immune metabolism and inflammation. Here, we provide an update of studies in cardiovascular disease on the function and role of sirtuins in macrophage inflammation and metabolism, as well as drug candidates that may interfere with sirtuins, pointing to future prospects in this field.
Asunto(s)
Enfermedades Cardiovasculares , Sirtuinas , Humanos , Sirtuinas/genética , Enfermedades Cardiovasculares/genética , Estrés Oxidativo/genética , Macrófagos/metabolismo , Inflamación/metabolismoRESUMEN
Marine fungi represent a huge untapped resource of natural products. The bio-activity of a new asperbutenolide A from marine fungus Aspergillus terreus was not well known. In the present study, the minimum inhibitory concentration (MIC) and RNA-Sequencing were used to analyze the bio-activity and sterilization mechanism of asperbutenolide A against clinical pathogenic microbes. The results showed that the MICs of asperbutenolide A against methicillin-resistant Staphylococcus aureus (MRSA) were 4.0-8.0â µg/mL. The asperbutenolide A present poor bio-activity against with candida. The sterilization mechanism of asperbutenolide A against MRSA showed that there were 1426 differentially-expressed genes (DEGs) between the groups of MRSA treated with asperbutenolide A and negative control. Gene Ontology (GO) classification analysis indicated that the DEGs were mainly involved in cellular process, metabolic process, cellular anatomical entity, binding, catalytic activity, etc. Kyoto Encyclopedia of Genes and Genomes (KEGG) classification analysis showed that these DEGs were mainly enriched in amino acid metabolism, carbohydrate metabolism, membrane transport, etc. Moreover, qRT-PCR showed similar trends in the expressions of argF, ureA, glmS and opuCA with the RNA-Sequencing. These results indicated that asperbutenolide A was with ideal bio-activity against with MRSA and could be as a new antibacterial agent.
Asunto(s)
4-Butirolactona/análogos & derivados , Staphylococcus aureus Resistente a Meticilina , Infecciones Estafilocócicas , Staphylococcus aureus , Antibacterianos/farmacología , Antibacterianos/química , Infecciones Estafilocócicas/tratamiento farmacológico , Pruebas de Sensibilidad Microbiana , Hongos , ARNRESUMEN
The stable flight posture that affects sports performance during flight is usually formed by the multiple angles of the athlete-ski posture. At present, research on the flight phase is mainly based on the single-factor impact analysis based on computational fluid dynamics simulation technology, but studies on the multi-factor coupling relationship of two or more factors is less. This study aims to determine the best optimal-level combination based on the simulation model of this work through comprehensive evaluation from the optimisation perspective of multi-factor coupling. Here, a refined model of the athlete-ski system with the characteristics of ski jumping was established. Reynolds time-averaged method was used for the simulation. A three-factor and five-level simulation test was conducted on the relative inclination between skis, the angle between the body and the ski and the ski V-angle through orthogonal experiment design. Our results show that the optimal-level combination of the relative inclination between skis of 120°, the angle between the body and the ski of 20°, and the ski V-angle of 30° is relatively best in terms of aerodynamic characteristics. Simulation results were similar to the results of the winter field data from video analysis, and the results were effective.
RESUMEN
Metal-organic frameworks (MOFs) with permanent porosity and multifunctional catalytic sites constructed by two or more organic ligands are regarded as effective heterogeneous catalysts to improve certain organic catalytic reactions. In this work, a pillared-layer Zn-MOF (MOF-LS10) was constructed by 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine (H4TCPP) and 2,5-di(pyridin-4-yl)thiazolo[5,4-d]thiazole (DPTZTZ). After activation, MOF-LS10 has a permanent porosity and moderate CO2 adsorption capacity. The introduction of thiazolo[5,4-d]thiazole (TZTZ), a photoactive unit, into the framework endows MOF-LS10 with excellent photocatalytic performance. MOF-LS10 can not only efficiently catalyze the formation of cyclic carbonates from CO2 and epoxide substrates under mild conditions but also can photocatalyze benzylamine coupling at room temperature. In addition, we used another two ligands 1,2,4,5-tetrakis(4-carboxyphenyl)benzene (H4BTEB) and 1,4-di(pyridin-4-yl)benzene (DPB) to synthesize MOF-LS11 (constructed by BTEB4- and DPTZTZ) and MOF-LS12 (constructed by TCPP4- and DPB) in order to explore whether the pyrazine structural unit and the TZTZ structural unit synergistically catalyze the reaction. The electron paramagnetic resonance spectrum demonstrates that the superoxide radical (·O2-), generated by electron transfer from the MOF excited by light to the oxidant, is the main active substance of oxidation. The design and synthesis of MOF-LS10 provide an effective synthetic strategy for the development of versatile heterogeneous catalysts for various organic reactions and a wide range of substrates.
RESUMEN
Hybrid plasmonic nanostructures have gained enormous attention in a variety of optoelectronic devices due to their surface plasmon resonance properties. Self-assembled hybrid metal/quantum dot (QD) architectures offer a means of coupling the properties of plasmonics and QDs to photodetectors, thereby modifying their functionality. The arrangement and localization of hybrid nanostructures have an impact on exciton trapping and light harvesting. Here, we present a hybrid structure consisting of self-assembled gold nanospheres (Au NSs) embedded in a solid matrix of PbS QDs for mapping the interface structures and the motion of charge carriers. Grazing-incidence small-angle X-ray scattering is utilized to analyze the localization and spacing of the Au NSs within the hybrid structure. Furthermore, by correlating the morphology of the Au NSs in the hybrid structure with the corresponding differences observed in the performance of photodetectors, we are able to determine the impact of interface charge carrier dynamics in the coupling structure. From the perspective of architecture, our study provides insights into the performance improvement of optoelectronic devices.
RESUMEN
OBJECTIVE: The objective of this research is to better understand the effects of upper limb fatigue on the cerebral cortex. The aim of this study was to investigate the characteristics of cerebral oxygenation and cortical functional connectivity in healthy adults after upper limb fatigue using functional near-infrared spectroscopy (fNIRS). METHODS: Nineteen healthy adults participated in this study. The participants began exercising on an arm crank ergometer with no load, which was then increased by 0.2 kg per minute, maintaining a speed of at least 90 revolutions per minute during the exercise. Functional near-infrared spectroscopy covering the prefrontal cortex and motor area was used to monitor brain activity during rest and exercise. Heart rate and RPE were monitored during exercise to evaluate the degree of fatigue. Paired-sample t-tests were used to examine differences in the concentration of oxygenated hemoglobin (HbO2) and functional connectivity before and after fatigue. RESULTS: All participants completed the exercise test that induced fatigue. We observed a significant decrease in HbO2 levels in the prefrontal and motor areas after exercise. In addition, brain network features showed a significant decrease in functional connectivity between the left and right motor cortices, between the motor and prefrontal cortices, and between both prefrontal cortices after fatigue. CONCLUSION: This study demonstrates that, in healthy adults, exercise-induced fatigue in the upper limbs significantly affects brain function. In particular, it leads to reduced functional connectivity between the motor cortex and the prefrontal cortex.
RESUMEN
Herein, we propose a strategy combining in situ sol-gel hydrothermal growth and annealing treatment for preparing multi-component carbon-based composites with high crystallinity of NiBDC (C-Ni/NiO/NiBDC). The C-Ni/NiO/NiBDC can be used by both positive and negative materials to build a supercapacitor that shows superior capacitance over the wide potential range of 0-1.8 V, resulting from the high crystallinity of NiBDC and synergistic effect of NiBDC, Ni and NiO, as well as their mutual intimate interfacial contact.
RESUMEN
Passive solar desalination with interfacial heating is a promising technique to utilize solar energy to convert seawater into fresh water through evaporation and condensation. However, the current freshwater flux of solar desalination is much below industrial requirements (> 20 L m-2 h-1 ). Herein, it is demonstrated that a 3D plasmonic evaporator with an efficient heat-mass evaporation interface (HM-EI) achieves a freshwater flux of 29.1 L m-2 h-1 for 3.5 wt.% NaCl, which surpasses the previous solar evaporators and approaches the level of reverse osmosis (the highest installed capacity in industrial seawater desalination technology). The realization of high freshwater flux solar desalination comes from the efficient HM-EI comprising a grid-like plasmonic macrostructure for enhanced energy utilization in heat properties and a large-pore microstructure for accelerated ion transport in mass properties. This work provides a new direction for designing next-generation solar evaporators with high freshwater flux for industrial requirements.
RESUMEN
Diabetic foot ulcer often leads to amputation, and both nutritional status and immune function have been associated with this process. We aimed to investigate the risk factors of diabetic ulcer-related amputation including the Controlling Nutritional Status score and neutrophil-to-lymphocyte ratio biomarker. We evaluated data from hospital in patients with diabetic foot ulcer, performing univariate and multivariate analyses to screen for high-risk factors and Kaplan-Meier analysis to correlate high-risk factors with amputation-free survival. Overall, 389 patients underwent 247 amputations over the follow-up period. After correction to relevant variables, we identified five independent risk factors for diabetic ulcer-related amputation: ulcer severity, ulcer site, peripheral arterial disease, neutrophil-to-lymphocyte ratio and nutritional status. Amputation-free survival was lower for the moderate-to-severe versus mild cases, for the plantar forefoot versus hindfoot location, for the concomitant peripheral artery disease versus without and in the high versus low neutrophil-to-lymphocyte ratio (all p < 0.01). The results showed that ulcer severity (p < 0.01), ulcer site (p < 0.01), peripheral artery disease (p < 0.01), neutrophil-to-lymphocyte ratio (p < 0.01) and Controlling Nutritional Status score (p < 0.05) were independent risk factors for amputation in diabetic foot ulcer patients and have predictive values for diabetic foot ulcer progression to amputation.
Asunto(s)
Diabetes Mellitus , Pie Diabético , Enfermedad Arterial Periférica , Humanos , Pie Diabético/complicaciones , Estado Nutricional , Neutrófilos , Factores de Riesgo , Linfocitos , Amputación Quirúrgica , Enfermedad Arterial Periférica/complicaciones , Estudios RetrospectivosRESUMEN
BACKGROUND: The development and innovation of biomechanical measurement methods provide a solution to the problems in ski jumping research. At present, research on ski jumping mostly focuses on the local technical characteristics of different phases, but studies on the technology transition process are less. OBJECTIVES: This study aims to evaluate a measurement system (i.e. the merging of 2D video recording, inertial measurement unit and wireless pressure insole) that can capture a wide range of sport performance and focus on the key transition technical characteristics. METHODS: The application validity of the Xsens motion capture system in ski jumping was verified under field conditions by comparing the lower limb joint angles of eight professional ski jumpers during the takeoff phase collected by different motion capture systems (Xsens and Simi high-speed camera). Subsequently, the key transition technical characteristics of eight ski jumpers were captured on the basis of the aforementioned measurement system. RESULTS: Validation results indicated that the joint angle point-by-point curve during the takeoff phase was highly correlated and had excellent agreement (0.966 ≤ r ≤ 0.998, P < 0.001). Joint root-mean-square error (RMSE) differences between model calculations were 5.967° for hip, 6.856° for knee and 4.009° for ankle. CONCLUSIONS: Compared with 2D video recording, the Xsens system shows excellent agreement to ski jumping. Furthermore, the established measurement system can effectively capture the key transition technical characteristics of athletes, particularly in the dynamic changes of straight turn into arc in inrun, the adjustment of body posture and ski movement during early flight and landing preparation.
Asunto(s)
Articulación del Tobillo , Extremidad Inferior , Humanos , Fenómenos Biomecánicos , Atletas , TecnologíaRESUMEN
Purpose: The purpose of this study was to examine biomechanical performance of the foot-up serve (FUS) in female tennis players at different skill levels. Methods: FUS analysis was completed in the biomechanical laboratory by 32 female college tennis players at three different levels. During FUS, 3D-biomechanical data from tennis players' lower limbs were collected. One-way ANOVA was used to examine differences in kinematic and kinetic data between groups Results: Range of motion (ROM) of bilateral lower-limb joints revealed significant differences in kinematics performance during both the preparation and landing cushion phases (p < 0.05). During preparation, Level 3 was significantly longer than Level 2 (P-a = 0.042, P-b = 0.001, and P-c = 0.006). During the flight phase, significant differences between levels 1 and 3 (P-a:0.002) and levels 1 and 2 (P-c:0.000) were discovered (P-a:0.002 and P-c:0.000). There were significant height differences between levels 1 and 2 as well as between levels 1 and 3. (P-a = 0.001, P-c = 0.000). During serve preparation (P-c = 0.001) and landing, GRF's peak was significantly higher than level 3. (P-c:0.007). Significant differences were found between groups in the LLS preparation stage, with level 3 significantly higher than levels 1 and 2. (P-a = 0.000, P-b = 0.001, and P-c = 0.000); during landing, level 2 LLS was significantly higher than levels 1 and 3. (P-a = 0.000, P-b = 0.000, and P-c = 0.035). Conclusion: The range of motion of joints and the stiffness of the lower limbs have a significant impact on a tennis player's FUS performance. A larger of joint mobility and lower-limb stiffness promote better performance during the FUS preparation stage.
RESUMEN
Probiotics have demonstrated various bioactive functions but poor storage and application stability, and encapsulation a promising method of increasing its viability. In this study, whey protein concentrate (WPC) and pectin (PEC) formed non-covalent complexes through electrostatic interaction at pH 3.0. The formed WPC-PEC complexes showed superior particle size, absolute potential, emulsification properties, and structural changes when PEC concentration was >0.8 % (w/v). This made them appropriate as a hydrophilic emulsifier to stabilize W/O/W emulsions. Then, Lacticaseibacillus rhamnosus, one representative of probiotics, was encapsulated in the internal aqueous phase of W/O/W emulsions. We obtained higher encapsulation efficiency (78.49 %) and smaller D4,3 (9.72 µm) with 0.8 % (w/v) PEC concentration. Encapsulation of Lacticaseibacillus rhamnosus in W/O/W emulsions improved its viability under harsh conditions, including 28 days storage at 4 °C, simulated pasteurization, and simulated gastrointestinal digestion. W/O/W emulsions stabilized by WPC-PEC non-covalent complexes further improved the survival of Lacticaseibacillus rhamnosus against various adverse conditions as compared to WPC. These findings suggest that the studied W/O/W emulsions systems have the potential to deliver probiotics in food substrates to enhance their viability during production processing, storage transportation, and digestion.
Asunto(s)
Lacticaseibacillus rhamnosus , Pectinas , Pectinas/química , Proteína de Suero de Leche/química , Emulsiones/química , Lacticaseibacillus , PasteurizaciónRESUMEN
We aimed to investigate the impact of a single bout of endurance exercise on the brain-derived neurotrophic factor (BDNF) in humans and analyze how a single bout of endurance exercise impacts the peripheral BDNF types by age group. We performed a systematic literature review by searching PubMed, Elsevier, and Web of Science for studies that included a single bout of endurance exercise in the experimental group and other exercise types in the control group. Eight interventions were included in the study. Overall, a single bout of endurance exercise significantly increased BDNF expression (SMD = 0.30; 95% CI = [0.08, 0.52]; p = 0.001), which was confirmed in the serum BDNF (SMD = 0.30; 95% CI = [0.04, 0.55]; p < 0.001). A non-significant trend was observed in the plasma BDNF (SMD = 0.31; 95% CI = [−0.13, 0.76]; p = 0.017). The serum and plasma BDNF levels significantly increased regardless of age (SMD = 0.35; 95% CI = [0.11, 0.58]; p = 0.004; I2 = 0%). In conclusion, a single bout of endurance exercise significantly elevates BDNF levels in humans without neurological disorders, regardless of age. The serum BDNF is a more sensitive index than the plasma BDNF in evaluating the impact of a single bout of endurance exercise on the BDNF.
RESUMEN
The utilization of lignin, the most abundant aromatic biomass component, is at the forefront of sustainable engineering, energy, and environment research, where its abundance and low-cost features enable widespread application. Constructing lignin into material parts with controlled and desired macro- and microstructures and properties via additive manufacturing has been recognized as a promising technology and paves the way to the practical application of lignin. Considering the rapid development and significant progress recently achieved in this field, a comprehensive and critical review and outlook on three-dimensional (3D) printing of lignin is highly desirable. This article fulfils this demand with an overview on the structure of lignin and presents the state-of-the-art of 3D printing of pristine lignin and lignin-based composites, and highlights the key challenges. It is attempted to deliver better fundamental understanding of the impacts of morphology, microstructure, physical, chemical, and biological modifications, and composition/hybrids on the rheological behavior of lignin/polymer blends, as well as, on the mechanical, physical, and chemical performance of the 3D printed lignin-based materials. The main points toward future developments involve hybrid manufacturing, in situ polymerization, and surface tension or energy driven molecular segregation are also elaborated and discussed to promote the high-value utilization of lignin.