RESUMEN
The emergence of life has been a subject of intensive research for decades. Different approaches and different environmental "cradles" have been studied, from space to the deep sea. Since the recent discovery of a natural electrical current through deep-sea hydrothermal vents, a new energy source is considered for the transition from inorganic to organic. This energy source (electron donor) is used by modern microorganisms via a new trophic type, called electrotrophy. In this review, we draw a parallel between this metabolism and a new theory for the emergence of life based on this electrical electron flow. Each step of the creation of life is revised in the new light of this prebiotic electrochemical context, going from the evaluation of similar electrical current during the Hadean, the CO2 electroreduction into a prebiotic primordial soup, the production of proto-membranes, the energetic system inspired of the nitrate reduction, the proton gradient, and the transition to a planktonic proto-cell. Finally, this theory is compared to the two other theories in hydrothermal context to assess its relevance and overcome the limitations of each. Many critical factors that were limiting each theory can be overcome given the effect of electrochemical reactions and the environmental changes produced.
RESUMEN
Microbial electrosynthesis has recently emerged as a promising technology for the sustainable production of organic acids, bioplastics, or biofuels from electricity and CO2. However, the diversity of catalysts and metabolic pathways is limited to mainly mesophilic acetogens or methanogens. Here, eleven hyperthermophilic strains related to Archaeoglobales, Thermococcales, Aquificales, and methanogens were screened for microbial electrosynthesis. The strains were previously isolated from deep-sea hydrothermal vents, where a naturally occurring, spontaneous electrical current can serve as a source of energy for microbial metabolism. After 6 days of incubation in an electrochemical system, all strains showed current consumption, biofilm formation, and small organic molecule production relative to the control. Six selected strains were then incubated over a longer period of time. In the course of one month, a variety of metabolic intermediates of biotechnological relevance such as succinic acid and glycerol accumulated. The production rates and the promotion of specific metabolic pathways seemed to be influenced by the experimental conditions, such as the concentration of CO2 in the gas phase and electron acceptor limitation. Further work is necessary to clearly identify these effects to potentially be able to tune the microbial electrosynthesis of compounds of interest.
RESUMEN
Recent studies have shown the presence of an abiotic electrical current across the walls of deep-sea hydrothermal chimneys, allowing the growth of electroautotrophic microbial communities. To understand the role of the different phylogenetic groups and metabolisms involved, this study focused on electrotrophic enrichment with nitrate as electron acceptor. The biofilm density, community composition, production of organic compounds, and electrical consumption were monitored by FISH confocal microscopy, qPCR, metabarcoding, NMR, and potentiostat measurements. A statistical analysis by PCA showed the correlation between the different parameters (qPCR, organic compounds, and electron acceptors) in three distinct temporal phases. In our conditions, the Archaeoglobales have been shown to play a key role in the development of the community as the first colonizers on the cathode and the first producers of organic compounds, which are then used as an organic source by heterotrophs. Finally, through subcultures of the community, we showed the development of a greater biodiversity over time. This observed phenomenon could explain the biodiversity development in hydrothermal contexts, where energy sources are transient and unstable.
RESUMEN
Deep-sea hydrothermal vents are extreme and complex ecosystems based on a trophic chain. We are still unsure of the identities of the first colonizers of these environments and their metabolism, but they are thought to be (hyper)thermophilic autotrophs. Here we investigate whether the electric potential observed across hydrothermal chimneys could serve as an energy source for these first colonizers. Experiments were performed in a two-chamber microbial electrochemical system inoculated with deep-sea hydrothermal chimney samples, with a cathode as sole electron donor, CO2 as sole carbon source, and nitrate, sulfate, or oxygen as electron acceptors. After a few days of culturing, all three experiments showed growth of electrotrophic biofilms consuming the electrons (directly or indirectly) and producing organic compounds including acetate, glycerol, and pyruvate. Within the biofilms, the only known autotroph species retrieved were members of Archaeoglobales. Various heterotrophic phyla also grew through trophic interactions, with Thermococcales growing in all three experiments as well as other bacterial groups specific to each electron acceptor. This electrotrophic metabolism as energy source driving initial microbial colonization of conductive hydrothermal chimneys is discussed.
RESUMEN
To study the role of exoelectrogens within the trophic network of deep-sea hydrothermal vents, we performed successive subcultures of a hyperthermophilic community from a hydrothermal chimney sample on a mix of electron donors in a microbial fuel cell system. Electrode (the electron acceptor) was swapped every week to enable fresh development from spent media as inoculum. The MFC at 80 °C yielded maximum current production increasing from 159 to 247 mA m-2 over the subcultures. The experiments demonstrated direct production of electric current from acetate, pyruvate, and H2 and indirect production from yeast extract and peptone through the production of H2 and acetate from fermentation. The microorganisms found in on-electrode communities were mainly affiliated to exoelectrogenic Archaeoglobales and Thermococcales species, whereas in liquid media, the communities were mainly affiliated to fermentative Bacillales and Thermococcales species. The work shows interactions between fermentative microorganisms degrading complex organic matter into fermentation products that are then used by exoelectrogenic microorganisms oxidizing these reduced compounds while respiring on a conductive support. The results confirmed that with carbon cycling, the syntrophic relations between fermentative microorganisms and exoelectrogens could enable some microbes to survive as biofilm in extremely unstable conditions. Graphical Abstract Schematic representation of cross-feeding between fermentative and exoelectrogenic microbes on the surface of the conductive support. B, Bacillus/Geobacillus spp.; Tc, Thermococcales; Gg, Geoglobus spp.; Py, pyruvate; Ac, acetate.
Asunto(s)
Archaea/química , Archaea/fisiología , Respiraderos Hidrotermales/microbiología , Acetatos/metabolismo , Archaea/clasificación , Archaea/genética , Biopelículas , Electricidad , Electrodos/microbiología , Fermentación , Hidrógeno/metabolismo , Oxidación-Reducción , Ácido Pirúvico/metabolismoRESUMEN
While more and more investigations are done to study hyperthermophilic exoelectrogenic communities from environments, none have been performed yet on deep-sea hydrothermal vent. Samples of black smoker chimney from Rainbow site on the Atlantic mid-oceanic ridge have been harvested for enriching exoelectrogens in microbial electrolysis cells under hyperthermophilic (80⯰C) condition. Two enrichments were performed in a BioElectrochemical System specially designed: one from direct inoculation of crushed chimney and the other one from inoculation of a pre-cultivation on iron (III) oxide. In both experiments, a current production was observed from 2.4â¯A/m2 to 5.8â¯A/m2 with a set anode potential of -0.110â¯V vs Ag/AgCl. Taxonomic affiliation of the exoelectrogen communities obtained on the electrode exhibited a specific enrichment of Archaea belonging to Thermococcales and Archeoglobales orders, even when both inocula were dominated by Bacteria.
Asunto(s)
Archaea , Respiraderos Hidrotermales , Océano Atlántico , Bacterias , Electrólisis , Filogenia , ARN Ribosómico 16S , Agua de MarRESUMEN
Biohydrogen production by the hyperthermophilic and halophilic bacterium T. maritima, using fruit and vegetable wastes as the carbon and energy sources was studied. Batch fermentation cultures showed that the use of a culture medium containing natural seawater and fruit and vegetable wastes can replace certain components (CaCl2, MgCl2, Balch's oligo-elements, yeast extract, KH2PO4 and K2HPO4) present in basal medium. However, a source of nitrogen and sulfur remained necessary for biohydrogen production. When fruit and vegetable waste collected from a wholesale market landfill was used, no decreases in total H2 production (139 mmolâ¯L-1) or H2 yield (3.46 molâ¯mol-1) was observed.
Asunto(s)
Eliminación de Residuos , Agua de Mar , Thermotoga maritima , Frutas , Hidrógeno , VerdurasRESUMEN
BACKGROUND: Thermotoga maritima is a hyperthermophilic bacterium known to produce hydrogen from a large variety of substrates. The aim of the present study is to propose a mathematical model incorporating kinetics of growth, consumption of substrates, product formations, and inhibition by hydrogen in order to predict hydrogen production depending on defined culture conditions. RESULTS: Our mathematical model, incorporating data concerning growth, substrates, and products, was developed to predict hydrogen production from batch fermentations of the hyperthermophilic bacterium, T. maritima. It includes the inhibition by hydrogen and the liquid-to-gas mass transfer of H2, CO2, and H2S. Most kinetic parameters of the model were obtained from batch experiments without any fitting. The mathematical model is adequate for glucose, yeast extract, and thiosulfate concentrations ranging from 2.5 to 20 mmol/L, 0.2-0.5 g/L, or 0.01-0.06 mmol/L, respectively, corresponding to one of these compounds being the growth-limiting factor of T. maritima. When glucose, yeast extract, and thiosulfate concentrations are all higher than these ranges, the model overestimates all the variables. In the window of the model validity, predictions of the model show that the combination of both variables (increase in limiting factor concentration and in inlet gas stream) leads up to a twofold increase of the maximum H2-specific productivity with the lowest inhibition. CONCLUSIONS: A mathematical model predicting H2 production in T. maritima was successfully designed and confirmed in this study. However, it shows the limit of validity of such mathematical models. Their limit of applicability must take into account the range of validity in which the parameters were established.
RESUMEN
BACKGROUND: Thermotoga maritima and T. neapolitana are hyperthermophile bacteria chosen by many research teams to produce bio-hydrogen because of their potential to ferment a wide variety of sugars with the highest theoretical H2/glucose yields. However, to develop economically sustainable bio-processes, the culture medium formulation remained to be optimized. The main aim of this study was to quantify accurately and specifically the effect of thiosulfate, used as sulfured nutriment model, on T. maritima growth, yields and productivities of hydrogen. The results were obtained from batch cultures, performed into a bioreactor, carefully controlled, and specifically designed to prevent the back-inhibition by hydrogen. RESULTS: Among sulfured nutriments tested, thiosulfate, cysteine, and sulfide were found to be the most efficient to stimulate T. maritima growth and hydrogen production. In particular, under our experimental conditions (glucose 60 mmol L-1 and yeast extract 1 g L-1), the cellular growth was limited by thiosulfate concentrations lower than 0.06 mmol L-1. Under these conditions, the cellular yield on thiosulfate (Y X/Thio) could be determined at 3617 mg mmol-1. In addition, it has been shown that the limitations of T. maritima growth by thiosulfate lead to metabolic stress marked by a significant metabolic shift of glucose towards the production of extracellular polysaccharides (EPS). Finally, it has been estimated that the presence of thiosulfate in the T. maritima culture medium significantly increased the cellular and hydrogen productivities by a factor 6 without detectable sulfide production. CONCLUSIONS: The stimulant effects of thiosulfate at very low concentrations on T. maritima growth have forced us to reconsider its role in this species and more probably also in all thiosulfato-reducer hyperthermophiles. Henceforth, thiosulfate should be considered in T. maritima as (1) an essential sulfur source for cellular materials when it is present at low concentrations (about 0.3 mmol g-1 of cells), and (2) as both sulfur source and detoxifying agent for H2 when thiosulfate is present at higher concentrations and, when, simultaneously, the pH2 is high. Finally, to improve the hydrogen production in bio-processes using Thermotoga species, it should be recommended to incorporate thiosulfate in the culture medium.
RESUMEN
[NiFe]-hydrogenases are well-studied enzymes capable of oxidizing molecular hydrogen and reducing protons. EPR and FTIR spectroscopic studies have shown that these enzymes can be isolated in several redox states that include paramagnetic oxidized inactive Ni-A and Ni-B species and a reduced Ni-C form. The latter and the diamagnetic respectively more oxidized Ni-SI and more reduced Ni-R forms are generally thought to be involved in the catalytic cycle of [NiFe]-hydrogenases. With the exception of Ni-SI, these different stable states have been well characterized. Here, based on the crystal structure of a partially reduced Desulfovibrio fructosovorans (Df) enzyme and data from the literature we propose that at least one of the Ni-SI sub-states contains an unexpected combination of hydride and sulfenic acid moieties. We have also determined the structure of the less oxygen-sensitive Df [NiFe]-hydrogenase V74C mutant and found that more than half of the active site nickel occupies a novel position, called Ni'. In this new position, the metal ion is coordinated by two cysteine thiolates, a bridging species modeled as SH(-) and a main chain carboxamido N atom. The Ni' coordination is similar to the one found in Ni superoxide dismutase, an enzyme that operates at significantly more positive potentials than [NiFe]-hydrogenases. We propose that the oxygen-tolerance of the V74C variant results from a high potential stabilization of a Ni'(iii) species induced by the change in the metal ion coordination sphere. We also propose that transient Ni'(iii) species can rapidly attract successive electrons from the Fe4S4 proximal cluster accelerating the reduction of oxygen to water and hydroxide. The naturally occurring oxygen-tolerant [NiFe]-hydrogenases have an unusual proximal cluster that has been shown to be exceptionally plastic and capable of undergoing two successive one-electron oxidations. This double oxidation is modulated by the migration of one of the iron atoms in the cluster to the main chain where, as Fe(iii), it forms a bond with a carboxamido N ligand. Like in the Df V74C variant the electrons from the proximal cluster help reducing O2 to H2O and OH(-). In conclusion, in both cases a metal-carboxamido bond may explain, at least partially, the observed oxygen tolerance.
Asunto(s)
Carbono/química , Hidrogenasas/química , Níquel/química , Oxígeno/química , Dominio Catalítico , Cisteína/química , Desulfovibrio/enzimología , Espectroscopía de Resonancia por Spin del Electrón , Electrones , Hidrógeno/química , Metales/química , Oxidación-Reducción , Fenotipo , Unión Proteica , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Catalytically inactive oxidized O2-sensitive [NiFe]-hydrogenases are characterized by a mixture of the paramagnetic Ni-A and Ni-B states. Upon O2 exposure, enzymes in a partially reduced state preferentially form the unready Ni-A state. Because partial O2 reduction should generate a peroxide intermediate, this species was previously assigned to the elongated Ni-Fe bridging electron density observed for preparations of [NiFe]-hydrogenases known to contain the Ni-A state. However, this proposition has been challenged based on the stability of this state to UV light exposure and the possibility of generating it anaerobically under either chemical or electrochemical oxidizing conditions. Consequently, we have considered alternative structures for the Ni-A species including oxidation of thiolate ligands to either sulfenate or sulfenic acid. Here, we report both new and revised [NiFe]-hydrogenases structures and conclude, taking into account corresponding characterizations by Fourier transform infrared spectroscopy (FTIR), that the Ni-A species contains oxidized cysteine and bridging hydroxide ligands instead of the peroxide ligand we proposed earlier. Our analysis was rendered difficult by the typical formation of mixtures of unready oxidized states that, furthermore, can be reduced by X-ray induced photoelectrons. The present study could be carried out thanks to the use of Desulfovibrio fructosovorans [NiFe]-hydrogenase mutants with special properties. In addition to the Ni-A state, crystallographic results are also reported for two diamagnetic unready states, allowing the proposal of a revised oxidized inactive Ni-SU model and a new structure characterized by a persulfide ion that is assigned to an Ni-'Sox' species.
Asunto(s)
Proteínas Bacterianas/química , Hidrogenasas/química , Methylophilaceae/enzimología , Sustitución de Aminoácidos , Proteínas Bacterianas/genética , Dominio Catalítico , Cristalografía por Rayos X , Hidrogenasas/genética , Hierro/química , Modelos Moleculares , Níquel/química , Oxidación-Reducción , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
A moderately halophilic, Gram-stain-negative, non-sporulating bacterium designed as strain TYRC17(T) was isolated from olive-processing effluents. The organism was a straight rod, motile by means of peritrichous flagella and able to respire both oxygen and nitrate. Growth occurred with 0-25â% (w/v) NaCl (optimum, 7â%), at pH 5-11 (optimum, pH 7.0) and at 4-50 °C (optimally at 35 °C). It accumulated poly-ß-hydroxyalkanoate granules and produced exopolysaccharides. The predominant fatty acids were C18â:â1ω7c, C16â:â1ω7c and C16â:â0. Ubiquinone 9 (Q-9) was the only respiratory quinone. The DNA G+C content of TYRC17(T) was 53.9 mol%. Phylogenetic analyses of 16S rRNA gene sequences revealed that the strain represents a member of the genus Halomonas and more precisely of the subgroup containing Halomonas sulfidaeris, H. titanicae, H. variabilis, H. zhanjiangensis, H. alkaliantarctica, H. boliviensis and H. neptunia. TYRC17(T) showed high 16S-rRNA sequence identities in particular with the three last species listed (99.4-99.5â%). A multilocus sequence analysis (MLSA) using the 23S rRNA, gyrB, rpoD and secA genes allowed clarifying the phylogenetic position of TYRC17(T). This, combined with the level of DNA-DNA hybridization between TYRC17(T) and its closest relatives ranging from 21.6â% to 48.4â%, indicated that TYRC17(T) did not represent any of these species. On the basis of phenotypic and genotypic characteristics, and also genomic and phylogenetic evidence, it was concluded that strain TYRC17(T) represented a novel species of the genus Halomonas. The name Halomonas olivaria sp. nov. is proposed with TYRC17(T) (â=âDSM 19074(T)â=âCCUG 53850B(T)) as the type strain.
Asunto(s)
Halomonas/clasificación , Olea/microbiología , Filogenia , Aguas Residuales/microbiología , Técnicas de Tipificación Bacteriana , Composición de Base , Teorema de Bayes , ADN Bacteriano/genética , Ácidos Grasos/química , Genes Bacterianos , Halomonas/genética , Halomonas/aislamiento & purificación , Hidroxibutiratos/metabolismo , Datos de Secuencia Molecular , Marruecos , Tipificación de Secuencias Multilocus , Hibridación de Ácido Nucleico , Poliésteres/metabolismo , Polisacáridos Bacterianos/biosíntesis , ARN Ribosómico 16S/genética , Ubiquinona/químicaRESUMEN
We studied the mechanism of aerobic inactivation of Desulfovibrio fructosovorans nickel-iron (NiFe) hydrogenase by quantitatively examining the results of electrochemistry, EPR and FTIR experiments. They suggest that, contrary to the commonly accepted mechanism, the attacking O(2) is not incorporated as an active site ligand but, rather, acts as an electron acceptor. Our findings offer new ways toward the understanding of O(2) inactivation and O(2) tolerance in NiFe hydrogenases.
Asunto(s)
Hidrogenasas/metabolismo , Oxígeno/metabolismo , Desulfovibrio/enzimología , Técnicas Electroquímicas , Espectroscopía de Resonancia por Spin del Electrón , Hidrogenasas/química , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Nickel-containing hydrogenases, the biological catalysts of oxidation and production, reversibly inactivate under anaerobic, oxidizing conditions. We aim at understanding the mechanism of (in)activation and what determines its kinetics, because there is a correlation between fast reductive reactivation and oxygen tolerance, a property of some hydrogenases that is very desirable from the point of view of biotechnology. Direct electrochemistry is potentially very useful for learning about the redox-dependent conversions between active and inactive forms of hydrogenase, but the voltammetric signals are complex and often misread. Here we describe simple analytical models that we used to characterize and compare 16 mutants, obtained by substituting the position-74 valine of the -sensitive NiFe hydrogenase from Desulfovibrio fructosovorans. We observed that this substitution can accelerate reactivation up to 1,000-fold, depending on the polarity of the position 74 amino acid side chain. In terms of kinetics of anaerobic (in)activation and oxygen tolerance, the valine-to-histidine mutation has the most spectacular effect: The V74H mutant compares favorably with the -tolerant hydrogenase from Aquifex aeolicus, which we use here as a benchmark.
Asunto(s)
Biotecnología/métodos , Desulfovibrio/enzimología , Activación Enzimática/genética , Hidrogenasas/genética , Hidrogenasas/metabolismo , Modelos Biológicos , Sustitución de Aminoácidos/genética , Anaerobiosis , Activación Enzimática/fisiología , Cinética , Mutación Missense/genética , Oxidación-ReducciónRESUMEN
When enzymes are optimized for biotechnological purposes, the goal often is to increase stability or catalytic efficiency. However, many enzymes reversibly convert their substrate and product, and if one is interested in catalysis in only one direction, it may be necessary to prevent the reverse reaction. In other cases, reversibility may be advantageous because only an enzyme that can operate in both directions can turnover at a high rate even under conditions of low thermodynamic driving force. Therefore, understanding the basic mechanisms of reversibility in complex enzymes should help the rational engineering of these proteins. Here, we focus on NiFe hydrogenase, an enzyme that catalyzes H(2) oxidation and production, and we elucidate the mechanism that governs the catalytic bias (the ratio of maximal rates in the two directions). Unexpectedly, we found that this bias is not mainly determined by redox properties of the active site, but rather by steps which occur on sites of the proteins that are remote from the active site. We evidence a novel strategy for tuning the catalytic bias of an oxidoreductase, which consists in modulating the rate of a step that is limiting only in one direction of the reaction, without modifying the properties of the active site.
Asunto(s)
Desulfovibrio/enzimología , Hidrogenasas/metabolismo , Dominio Catalítico , Desulfovibrio/química , Desulfovibrio/genética , Hidrogenasas/química , Hidrogenasas/genética , Modelos Moleculares , Mutación , Oxidación-Reducción , TermodinámicaRESUMEN
Electrons are transferred over long distances along chains of FeS clusters in hydrogenases, mitochondrial complexes, and many other respiratory enzymes. It is usually presumed that electron transfer is fast in these systems, despite the fact that there has been no direct measurement of rates of FeS-to-FeS electron transfer in any respiratory enzyme. In this context, we propose and apply to NiFe hydrogenase an original strategy that consists of quantitatively interpreting the variations of steady-state activity that result from changing the nature of the FeS clusters which connect the active site to the redox partner, and/or the nature of the redox partner. Rates of intra- and intermolecular electron transfer are deduced from such large data sets. The mutation-induced variations of electron transfer rates cannot be explained by changes in intercenter distances and reduction potentials. This establishes that FeS-to-FeS rate constants are extremely sensitive to the nature and coordination of the centers.
Asunto(s)
Hidrogenasas/metabolismo , Desulfovibrio vulgaris/enzimología , Espectroscopía de Resonancia por Spin del Electrón , Transporte de Electrón , Hidrogenasas/química , Hierro/química , Cinética , Modelos Moleculares , Conformación Proteica , Azufre/químicaRESUMEN
Hydrogenases are efficient biological catalysts of H(2) oxidation and production. Most of them are inhibited by O(2), and a prerequisite for their use in biotechnological applications under air is to improve their oxygen tolerance. We have previously shown that exchanging the residue at position 74 in the large subunit of the oxygen-sensitive [NiFe] hydrogenase from Desulfovibrio fructosovorans could impact the reaction of the enzyme with O(2) (Dementin, S.; J. Am. Chem. Soc. 2009, 131, 10156-10164; Liebgott, P. P.; Nat. Chem. Biol. 2010, 6, 63-70). This residue, a valine in the wild-type enzyme, located at the bottleneck of the gas channel near the active site, has here been exchanged with a cysteine. A thorough characterization using a combination of kinetic, spectroscopic (EPR, FTIR), and electrochemical studies demonstrates that the V74C mutant has features of the naturally occurring oxygen-tolerant membrane-bound hydrogenases (MBH). The mutant is functional during several minutes under O(2), has impaired H(2)-production activity, and has a weaker affinity for CO than the WT. Upon exposure to O(2), it is converted into the more easily reactivatable inactive form, Ni-B, and this inactive state reactivates about 20 times faster than in the WT enzyme. Control experiments carried out with the V74S and V74N mutants indicate that protonation of the position 74 residue is not the reason the mutants reactivate faster than the WT enzyme. The electrochemical behavior of the V74C mutant toward O(2) is intermediate between that of the WT enzyme from D. fructosovorans and the oxygen-tolerant MBH from Aquifex aeolicus.
Asunto(s)
Dominio Catalítico , Cisteína , Hidrogenasas/química , Hidrogenasas/metabolismo , Mutación , Oxígeno/farmacología , Valina , Aerobiosis , Anaerobiosis , Monóxido de Carbono/farmacología , Membrana Celular/metabolismo , Desulfovibrio/enzimología , Medición de Intercambio de Deuterio , Electroquímica , Activación Enzimática/efectos de los fármacos , Bacterias Gramnegativas/enzimología , Hidrógeno/metabolismo , Hidrogenasas/antagonistas & inhibidores , Hidrogenasas/genética , Cinética , Modelos Moleculares , Oxidación-Reducción , Análisis Espectral , TermodinámicaRESUMEN
In hydrogenases and many other redox enzymes, the buried active site is connected to the solvent by a molecular channel whose structure may determine the enzyme's selectivity with respect to substrate and inhibitors. The role of these channels has been addressed using crystallography and molecular dynamics, but kinetic data are scarce. Using protein film voltammetry, we determined and then compared the rates of inhibition by CO and O2 in ten NiFe hydrogenase mutants and two FeFe hydrogenases. We found that the rate of inhibition by CO is a good proxy of the rate of diffusion of O2 toward the active site. Modifying amino acids whose side chains point inside the tunnel can slow this rate by orders of magnitude. We quantitatively define the relations between diffusion, the Michaelis constant for H2 and rates of inhibition, and we demonstrate that certain enzymes are slowly inactivated by O2 because access to the active site is slow.
Asunto(s)
Desulfovibrio/enzimología , Hidrogenasas/química , Oxígeno/química , Aminoácidos/química , Monóxido de Carbono/química , Dominio Catalítico , Cristalografía por Rayos X/métodos , Difusión , Electroquímica/métodos , Espectroscopía de Resonancia por Spin del Electrón , Hidrógeno/química , Cinética , Modelos Moleculares , Conformación Molecular , Simulación de Dinámica MolecularRESUMEN
Hydroxytyrosol (HTyr) is a potent natural antioxidant found in olive mill wastewaters. Bacterial conversion of 4-tyrosol (2-(4-hydroxyphenyl)-ethanol) to HTyr was reported in a limited number of bacterial species including Pseudomonas aeruginosa. In this work, we studied this conversion, taking as a model the newly isolated Halomonas sp. strain HTB24. It was first hypothesized that the enzyme responsible for 4-tyrosol hydroxylation in HTyr was a 4-hydroxyphenylacetic acid 3-hydroxylase (HPAH, EC 1.14.13.3), previously known to convert 4-hydroxyphenylacetic acid (4-HPA) into 3,4-dihydroxyphenylacetic acid (3,4-DHPA) in P. aeruginosa. Cloning and expression of hpaB (oxygenase component) and hpaC (reductase component) genes from P. aeruginosa confirmed this hypothesis. Furthermore, using cultures of HTB24 containing 4-tyrosol, it was shown that 4-HPA accumulation preceded 4-tyrosol hydroxylation. We further demonstrated that the synthesis of HPAH activity was induced by 4-HPA, with the latter compound being formed from 4-tyrosol oxidation by aryl-dehydrogenases. Interestingly, similar results were obtained with other 4-HPA-induced bacteria, including P. aeruginosa, Serratia marcescens, Escherichia coli, Micrococcus luteus and other Halomonas, thus demonstrating general hydroxylating activity of 4-tyrosol by the HPAH enzyme. E. coli W did not have aryl-dehydrogenase activity and hence were unable to oxidize 4-tyrosol to 4-HPA and HTyr to 3,4-DHPA, making this bacterium a good candidate for achieving better HTyr production.
Asunto(s)
Bacterias/enzimología , Oxigenasas de Función Mixta/metabolismo , Fenilacetatos/metabolismo , Alcohol Feniletílico/análogos & derivados , Contaminantes Químicos del Agua/metabolismo , Biotransformación/efectos de los fármacos , Medios de Cultivo/metabolismo , Escherichia coli/enzimología , Halomonas/enzimología , Micrococcus luteus/enzimología , Alcohol Feniletílico/metabolismo , Pseudomonas aeruginosa/enzimología , Serratia marcescens/enzimologíaRESUMEN
Chronoamperometric experiments with adsorbed electrocatalysts are commonly performed either for analytical purposes or for studying the catalytic mechanism of a redox enzyme. In the context of amperometric sensors, the current may be recorded as a function of time while the analyte concentration is being increased to determine a linearity range. In mechanistic studies of redox enzymes, chronoamperometry proved powerful for untangling the effects of electrode potential and time, which are convoluted in cyclic voltammetric measurements, and for studying the energetics and kinetics of inhibition. In all such experiments, the fact that the catalyst's coverage and/or activity decreases over time distorts the data. This may hide meaningful features, introduce systematic errors, and limit the accuracy of the measurements. We propose a general and surprisingly simple method for correcting for electrocatalyst desorption and inactivation, which greatly increases the precision of chronoamperometric experiments. Rather than subtracting a baseline, this consists in dividing the current, either by a synthetic signal that is proportional to the instant electroactive coverage or by the signal recorded in a control experiment. In the latter, the change in current may result from film loss only or from film loss plus catalyst inactivation. We describe the different strategies for obtaining the control signal by analyzing various data recorded with adsorbed redox enzymes: nitrate reductase, NiFe hydrogenase, and FeFe hydrogenase. In each case we discuss the trustfulness and the benefit of the correction. This method also applies to experiments where electron transfer is mediated, rather than direct, providing the current is proportional to the time-dependent concentration of catalyst.