RESUMEN
Despite the importance of the stability of the 2D catalysts in harsh electrolyte solutions, most studies have focused on improving the catalytic performance of molybdenum disulfide (MoS2) catalysts rather than the sustainability of hydrogen evolution. In previous studies, the vulnerability of MoS2 crystals is reported that the moisture and oxygen molecules can cause the oxidation of MoS2 crystals, accelerating the degradation of crystal structure. Therefore, optimization of catalytic stability is crucial for approaching practical applications in 2D catalysts. Here, it is proposed that monolayered MoS2 catalysts passivated with an atomically thin hexagonal boron nitride (h-BN) layer can effectively sustain hydrogen evolution reaction (HER) and demonstrate the ultra-high current density (500 mA cmâ»2 over 11 h) and super stable (64 h at 150 mA cmâ»2) catalytic performance. It is further confirmed with density functional theory (DFT) calculations that the atomically thin h-BN layer effectively prevents direct adsorption of water/acid molecules while allowing the protons to be adsorbed/penetrated. The selective penetration of protons and prevention of crystal structure degradation lead to maintained catalytic activity and maximized catalytic stability in the h-BN covered MoS2 catalysts. These findings propose a promising opportunity for approaching the practical application of 2D MoS2 catalysts having long-term stability at high-current operation.
RESUMEN
The pursuit of sub-1-nm field-effect transistor (FET) channels within 3D semiconducting crystals faces challenges due to diminished gate electrostatics and increased charge carrier scattering. 2D semiconductors, exemplified by transition metal dichalcogenides, provide a promising alternative. However, the non-idealities, such as excess low-frequency noise (LFN) in 2D FETs, present substantial hurdles to their realization and commercialization. In this study, ideal LFN characteristics in monolayer MoS2 FETs are attained by engineering the metal-2D semiconductor contact and the subgap density of states (DOS). By probing non-ideal contact resistance effects using CuS and Au electrodes, it is uncovered that excess contact noise in the high drain current (ID) region can be substantially reduced by forming a van der Waals junction with CuS electrodes. Furthermore, thermal annealing effectively mitigates sulfur vacancy-induced subgap density of states (DOS), diminishing excess noise in the low ID region. Through meticulous optimization of metal-2D semiconductor contacts and subgap DOS, alignment of 1/f noise with the pure carrier number fluctuation model is achieved, ultimately achieving the sought-after ideal LFN behavior in monolayer MoS2 FETs. This study underscores the necessity of refining excess noise, heralding improved performance and reliability of 2D electronic devices.
RESUMEN
Electronic devices composed of semiconducting two-dimensional (2D) materials and ultrathin 2D metallic electrode materials, accompanying synergistic interactions and extraordinary properties, are becoming highly promising for future flexible and transparent electronic and optoelectronic device applications. Unlike devices with bulk metal electrode and 2D channel materials, devices with ultrathin 2D electrode and 2D channel are susceptible to chemical reactions in both channel and electrode surface due to the high surface to volume ratio of the 2D structures. However, so far, the effect of doping was primary concerned on the channel component, and there is lack of understanding in terms of how to modulate electrical properties of devices by engineering electrical properties of both the metallic electrode and the semiconducting channel. Here, we propose the novel, one-pot doping of the field-effect transistor (FET) based on 2D molybdenum disulfide (MoS2) channel and ultrathin copper sulfide (CuS) electrodes under mild iodine gas environment at room temperature, which simultaneously modulates electrical properties of the 2D MoS2channel and 2D CuS electrode in a facile and cost-effective way. After one-pot iodine doping, effective p-type doping of the channel and electrode was observed, which was shown through decreased off current level, improvedIon/Ioffratio and subthreshold swing value. Our results open up possibility for effectively and conveniently modulating electrical properties of FETs made of various 2D semiconductors and ultrathin contact materials without causing any detrimental damage.
RESUMEN
MoS2crystals grown by chemical vapor deposition are suited for realization of practical 2D semiconductor-based electronics. In order to construct complementary circuits with n-type MoS2, another p-type semiconductor, whose performance can be adjusted corresponding to that of MoS2in the limited chip area, has to be sought. Herein, we present a method for tuning switching threshold voltages of complementary inverters simply via inkjet printing without changing their channel dimensions. Random networks of inkjet printed single-walled carbon nanotubes are formed as p-channels beside MoS2, and their density and thickness are controlled by varying the number of printed layers. As a result, p-type transistor characteristics as well as inverter characteristics are facilely tuned only by varying the number of printed layers.
RESUMEN
Electronic devices in highly integrated and miniaturized systems demand electromagnetic interference shielding within nanoscale dimensions. Although several ultrathin materials have been proposed, satisfying various requirements such as ultrathin thickness, optical transparency, flexibility, and proper shielding efficiency remains a challenge. Herein, we report an ultrahigh electromagnetic interference (EMI) SSE/t value (>106 dB cm2/g) using a conductive CuS nanosheet with thickness less than 20 nm, which was synthesized at room temperature. We found that the EMI shielding efficiency (EMI SE) of the CuS nanosheet exceeds that of the traditional Cu film in the nanoscale thickness, which is due to high conductivity and the presence of internal dipole structures of the CuS nanosheet that contribute to absorption due to the damping of dipole oscillation. In addition, the CuS nanosheet exhibited high mechanical stability (104 cycles at 3 mm bending radius) and air stability (25 °C, 1 atm), which far exceeded the performance of the Cu nanosheet film. This remarkable performance of nanometer-thick CuS proposes an important pathway toward designing EMI shielding materials for wearable, flexible, and next-generation electronic applications.
RESUMEN
Contact engineering for monolayered transition metal dichalcogenides (TMDCs) is considered to be of fundamental challenge for realizing high-performance TMDCs-based (opto) electronic devices. Here, an innovative concept is established for a device configuration with metallic copper monosulfide (CuS) electrodes that induces sulfur vacancy healing in the monolayer molybdenum disulfide (MoS2 ) channel. Excess sulfur adatoms from the metallic CuS electrodes are donated to heal sulfur vacancy defects in MoS2 that surprisingly improve the overall performance of its devices. The electrode-induced self-healing mechanism is demonstrated and analyzed systematically using various spectroscopic analyses, density functional theory (DFT) calculations, and electrical measurements. Without any passivation layers, the self-healed MoS2 (photo)transistor with the CuS contact electrodes show outstanding room temperature field effect mobility of 97.6 cm2 (Vs)-1 , On/Off ratio > 108 , low subthreshold swing of 120 mV per decade, high photoresponsivity of 1 × 104 A W-1 , and detectivity of 1013 jones, which are the best among back-gated transistors that employ 1L MoS2 . Using ultrathin and flexible 2D CuS and MoS2 , mechanically flexible photosensor is also demonstrated, which shows excellent durability under mechanical strain. These findings demonstrate a promising strategy in TMDCs or other 2D material for the development of high performance and functional devices including self-healable sulfide electrodes.