RESUMEN
Near-field direct-writing electrospinning technology can be used to produce ordered micro/nanofiber membrane dressings. The application of this technology can simply realize the control of dressing porosity, compound different functional substances, and adjust their distribution, thus improving the defects of common dressings such as insufficient breathability, poor moisture retention performance, and single function. Herein, a novel multifunctional wound dressing was prepared to utilize near-field direct-writing electrospinning technology, in which calf skin collagen type I (CSC-I) and polycaprolactone (PCL) were used as the composite matrix, Hexafluoroisopropanol (HFIP) as the solvent, and erythromycin (ERY) as an anti-infective drug component. The results show that the micro/nanofiber membranes prepared by near-field direct-writing electrospinning technology can all present a complete mesh structure, excellent thermal stability, and good moisturizing properties. Moreover, the composite fiber membrane loaded with ERY not only had obvious antibacterial properties against E. coli and S. thermophilus but also a better slow-release function of drugs (it is rare to have both in traditional wound dressings). Therefore, this experimental design can provide relevant theories and an experimental foundation for preparing a new type of medical dressing with drug loading and has good guiding significance for the application and promotion of near-field direct-writing electrospinning in medical dressings.
RESUMEN
In this work, a functionalized polycaprolactone (PCL) composite fiber combining calf-type I collagen (CO) and natural drug usnic acid (UA) was prepared, in which UA was used as an antibacterial agent. Through 3D near-field electrospinning, the mixed solution was prepared into PCL/CO/UA composite fibers (PCUCF), which has a well-defined perfect arrangement structure. The influence of electrospinning process parameters on fiber diameter was investigated, the optimal electrospinning parameters were determined, and the electric field simulation was conducted to verify the optimal parameters. The addition of 20% collagen made the composite fiber have good hydrophilicity and water absorption property. In the presence of PCUCF, 1% UA content significantly inhibited the growth rate of Gram-positive and negative bacteria in the plate culture. The AC-PCUCF (after crosslinking PCUCF) prepared by crosslinking collagen with genipin showed stronger mechanical properties, water absorption property, thermal stability, and drug release performance. Cell proliferation experiments showed that PCUCF and AC-PCUCF had no cytotoxicity and could promote cell proliferation and adhesion. The results show that PCL/CO/UA composite fiber has potential application prospects in biomedical dressing.
RESUMEN
Currently, the degradation of organic pollutants in wastewater by photocatalytic technology has attracted great attention. In this study, a new type of 3D printing material with photocatalytic activity was first prepared to print a water treatment equipment, and then a layer of silver-loaded TiO2 was coated on the equipment to further improve the catalytic degradation performance. The composite filaments with a diameter of 1.75 ± 0.05 mm were prepared by a melt blending method, which contained 10 wt% of modified TiO2 and 90 wt% of PLA. The silver-loaded TiO2 was uniformly coated on the equipment through a UV-curing method. The final results showed that those modified particles were uniformly dispersed in the PLA matrix. The stable printing composite filaments could be produced when 10 wt% TiO2 was added to the PLA matrix. Moreover, the photocatalytic degradation performance could be effectively improved after 5 wt% of silver loading was added. This novel facility showed good degradability of organic compounds in wastewater and bactericidal effect, which had potential applications for the drinking water treatment in the future.