Low-toxic, fluorescent labeled and size-controlled graphene oxide quantum dots@polystyrene nanospheres as reference material for quantitative determination and in vivo tracing.

Polystyrene (PS) is selected as a representative nanoplastic and persistent pollutant for its difficult degradation and wide application. The environmental risk assessment of PS is obstructed by the toxic dye-based fluorescent PS, which false positives could be induced by the leakage of dye. For high biocompatibility, low toxicity, hydrophilicity, good water dispersibility, strong fluorescent stability, graphene oxide quantum dots (o-CQDs) are selected and embedded into PS microspheres, i.e., o-CQDs@PS, by microemulsion polymerization and denoted as CPS. Meanwhile, the sizes of CPS, e.g., 100, 150, and 200 nm, could be controlled by optimizing the type and number of water-soluble initiators. The anti-interference, low toxicity, and in vivo fluorescent tracing of CPS are proven by the coexistence of metals (including Fe2+, Fe3+, K+, Ba2+, Al3+, Zn2+, Mg2+, Ca2+, and Na+) on the fluorescence intensity of CPS, the growth of Chlorella pyrenoidosa and Artemia cysts as aquatic phytoplankton and zooplankton cultured with CPS, and the transfer of CPS from water into brine shrimp. In the concentration range of 0.1-100 mg/L, CPS can be quantitatively determined, which is suitable for coastal water and wastewater treatment plants. Therefore, CPS with standard size is suitable as reference material of PS.

Benefit-Risk Assessment of Dietary Patterns by Bioavailable Metals, Gut Microbes, and Their Interaction for Human Health.

The high-carbohydrate, low-fat, low-protein (HC-LFP) and low-carbohydrate, high-fat, high-protein (LC-HFP) diets are the main dietary patterns worldwide. The influence of dietary patterns on bioavailable metals, gut microbes, and their interaction is still unknown. A biomimetic digestive tract with full functions is constructed to transform the diets into chyme, and the gut microbes are cultured with the corresponding chyme. The diet species-specificity in bioavailable metal content and the positive and negative correlations between bioavailable metals and microbial reproductions are disclosed. The safe dosage and maximum consumption are 369.5 and 858.6 g/d and 268.6 and 3119.0 g/d for LC-HFP and HC-LFP, respectively. When replacing HC-LFP with LC-HFP for 21 days, the bioavailability of Fe and Cr is increased 83.2% and 268.4%, respectively; the reproductions of harmful and benefical microbes are significantly increased and decreased. The prevalences of obesity, inflammation, septicemia, and cancer are increased, and then the risk of dietary pattern shift is disclosed.

Long-term stable, high accuracy, and visual detection platform for In-field analysis of nitrite in food based on colorimetric test paper and deep convolutional neural networks.

Nitrite is one of the most common carcinogens in daily food. Its simple, rapid, inexpensive, and in-field measurement is important for food safety, based on the requirements of the standard from Codex Alimentarius Commission and China. Using polyacrylonitrile (PAN) and thin layer silica gel (SG), p-aminophenylcyclic acid (SA) and naphthalene ethylenediamine hydrochloride (NEH), as carriers and chromogenic agents, respectively, PAN-NSS as nitrite color sensor is proposed. After fixing and protecting of SA and NEH with layer-upon-layer PAN, the validity period of the test paper can be prolonged from 7 days to more than 30 days. The reproducibility of PAN-NSS preparation is ensured by electrospinning. Combined with PAN-NSS, deep convolutional neural network (DCNN) and APP as a visual monitoring platform, which has the functions of rapid sampling, data processing and transmission, intuitive feedback, etc., and provides a fully integrated detection system for field detection.

Benefit-risk assessment of metal bioavailability in edible fungi by biomimetic whole digestive tracts with digestion, metabolism, and absorption functions.

As worldwide edible fungi, Lentinula edodes and Agaricus bisporus accumulate both essential and harmful metals. Metal bioavailability is important for metal benefit-risk assessment. A full functional model of digestive tracts (including digestion, metabolism, and absorption) is established. Under the digestive tract functions, the bioaccessible and bioavailable metals are released from edible fungi and absorbed by intestinal tract, respectively. Based on bioavailable metal contents in the intestine, safe dosage and maximum consumption are 43.52 g/d and 248.7 g/d for Agaricus bisporu, 20.59/328.9 g/d (for males/ female) and 132.9 g/d for Lentinus edodes; V, Co, Ni, Cu, Zn, Se, Cr, Cd and Pb in Agaricus bisporus and Lentinula edodes are absorbed mainly in the large intestine; Fe is mainly absorbed in small intestine; edible fungi species-specificity in metal bioavailability is observed for As and Mn, which are mainly absorbed by small and large intestine for Agaricus bisporus and Lentinus edodes, respectively; and then metal toxicity on small and large intestine is disclosed. Metal benefit-risk is assessed by the content of monolayer liposome-extracted metal in the chyme from small and large intestine, which is controlled by the gastrointestinal functions, metal and edible fungi species.

Thermal discharge influences the bioaccumulation and bioavailability of metals in oysters: Implications of ocean warming.

Human-induced temperature changes influence coastal regions, both via thermal pollution and ocean warming, which exerts profound effects on the chemistry of metals and the physiology of organisms. However, it remains unknown whether the increased temperature of discharged water or ocean warming, as a result of climate change, lead to an increase of human health risks associated with the consumption of sea foods. In this study, the influence of temperature on metal accumulation by oysters was studied in individuals collected from a coastal area affected by the thermal water discharge of the Houshi Power Plant, China. The bioaccumulation factor (BAF) and oral bioavailability (OBA) of metals in oysters was determined. Elevated temperatures led to an increase in BAF for Cu, Zn, Hg, and Cd (p < 0.05), but no change was observed for As and Pb (p > 0.05). The OBA for Cd, As, and Pb correlated positively to elevated temperatures (p < 0.05). However, for Cu and Zn, OBA was negatively correlated with increasing temperature (p < 0.05). As, Pb, and Cd in the trophically available metal (defined as a sum of heat-stable proteins, heat-denaturable proteins, and organelles) was significantly elevated at the highest temperature seawater site (site A) compared to the lowest seawater site (site B). Thus, the irregular variation of OBA for each metal may be the result of variations in the subcellular distribution of metals and the protein quality influenced by the increased temperature. Moreover, the increased temperature and increased the hazard quotient values of As and Cd (p < 0.05 for As, n = 6, p < 0.05 for Cd, n = 6), which provided an indication of the potential risks of the consumption of oysters or other seafood to future warming under climate change scenarios.

[Anti-arthritic-related metal bioavailability for optimal compatibility ratio of Aconiti Radix Cocta and Paeoniae Radix Alba].

Trace metals deficiency or excess are associated with the etiology and pathogenesis of rheumatoid arthritis(RA). Aconiti Radix Cocta(A) and Paeoniae Radix Alba(B) are commonly used together for the treatment of RA. In this study, we aim to determine anti-arthritic-related metal bioavailability in the compatibility of herb A and B for avoiding metal deficiency or excess, and optimize the combination ratio of herb A and B, accordingly. Anti-arthritic-related metal bioaccessibility were evaluated by in vitro simulator of all gastrointestinal tract(including mouth, stomach, small and large intestines), and the roles of gastrointestinal digestive enzymes and intestinal microflora were investigated. Anti-arthritic-related metal bioavailability was assessed by the affinity adsorption with liposomes. The results indicated that compatibility proportion of corresponding herbal plants, gastrointestinal digestion and microbial metabolic, which could affect metal digestion and absorption. The optimal compatibility proportion of 1 A∶1 B is recommended, according to the dose of anti-arthritic-related metal bioavailability, which is often chosen for clinical practice of RA therapy. Thus, anti-arthritic-related metal bioavailability might be the key active substances for RA treatment.

[Application of in vitro bionic digestion and biomembrane extraction for metal speciation analysis, bioavailability and risk assessment in lianhua qingwen capsule].

One of the causes of the high cost of pharmaceuticals and the major obstacles to rapidly assessing the bioavailability and risk of a chemical is the lack of experimental model systems. A new pre-treatment technology, in vitro bionic digestion was designed for metal analysis in Lianhua Qingwen capsule. The capsule was digested on 37 degrees C under the acidity of the stomach or intestine, and with the inorganic and organic compounds (including digestive enzymes) found in the stomach or intestine, and then the chyme was obtained. Being similar to the biomembrane between the gastrointestinal tract and blood vessels, monolayer liposome was used as biomembrane model Affinity-monolayer liposome metals (AMLMs) and water-soluble metals were used for metal speciation analysis in the capsule. Based on the concentration of AMLMs, the main absorption site of trace metals was proposed. The metal total contents or the concentration of AMLMs in the capsule were compared to the nutritional requirements, daily permissible dose and heavy metal total contents from the "import and export of medicinal plants and preparation of green industry state standards". The metal concentrations in the capsule were within the safety baseline levels for human consumption. After in vitro bionic digestion, most of trace metals were absorbed mainly in intestine. The concentration of As, Cd, Pb was 0.38, 0.07, 1.60 mg x kg(-1), respectively, far less than the permissible dose from the "import and export of medicinal plants and preparation of green industry state standards".

Metal bioavailability and risk assessment from edible brown alga Laminaria japonica, using biomimetic digestion and absorption system and determination by ICP-MS.

A new biomimetic digestion and absorption system, including in vitro bionic digestion and biomimetic membrane extraction, was used for the first time for the pretreatment of edible Laminaria japonica . After bionic digestion, 11 species of trace metals (V, Cr, Mn, Fe, Ni, Cu, Zn, Se, As, Cd, and Pb) in the resulting chyme were transformed into their final coordinated complexes and then absorbed by the biomembrane. Similar to the biomembrane between gastrointestinal tract and blood vessels, monolayer liposome was used for the first time as a biomembrane model. Affinity-monolayer liposome metals (AMLMs) were separated, determined by ICP-MS, and then used for the metal bioavailability assessment as the bioassimilated part. The action of gastrointestinal acidity and components (including digestive enzymes) was assessed on the basis of the concentration of AMLMs; the safe dosage and tolerable upper intake level of L. japonica for adults were proposed as 33.3 and 230.8 g/day, respectively.

Speciation analysis, bioavailability and risk assessment of trace metals in herbal decoctions using a combined technique of in Vitro digestion and biomembrane filtration as sample pretreatment method.

Sample preparation is the first crucial step in the speciation analysis, bioavailability and risk assessment of trace metals in plant samples such as herb and vegetables. Two bionic technologies titled 'in vitro digestion' and 'extraction with biomembrane' were developed for pre-treatment of herbal decoction. The decoctions of Aconiteum carmichaeli and Paeonia lactiflora were digested at body temperature, at the acidity of the stomach or intestine and with inorganic and organic materials (digestive enzymes were included for whole-bionic and excluded for semi-bionic) found in the stomach or intestine. Being similar to the biomembrane between the gastrointestinal tract and blood vessels, monolayer liposome was used as a biomembrane model. Affinity-monolayer liposome metals and water-soluble metals were used for speciation analysis and bioavailability assessment of copper and zinc in herbal decoction. In the decoction of Aconiteum carmichaeli and Paeonia lactiflora, Zn was mainly absorbed in the intestine and Cu was mainly absorbed by both stomach and intestine. The safe dosage for males and females is below 257.1 g/day Aconiteum carmichaeli and 529.4 g/day Paeonia lactiflora.

Simple and rapid spectrophotometric determination of trace titanium (IV) enriched by nanometer size zirconium dioxide in natural water.

A novel method for preconcentration of Ti(IV) with nanometer size ZrO(2) and determination by spectrophotometry has been developed. Ti(IV) was selectively adsorbed on 300 mg ZrO(2) from 500 mL solution at pH 6.0, then eluted by 5 mL 11.3 mol L(-1) HF. The eluent added was diantipyrylmethane (DAPM, as chromogenic reagent) and ascorbic acid (as masking agent), used for the analysis of Ti(IV) by measuring the absorbance at 390 nm with spectrophotometry, based on the chromogenic reaction between the Ti(IV) and DAPM. This method gave a concentration enhancement of 100 for 500 mL sample, eliminated the sizable interferences on direct determination with spectrophotometry. Detection limit (3 sigma, n=11) of 0.1 microg L(-1) was obtained. The method was applied to determine the concentration of Ti(IV) in river water and seawater and the analytical recoveries of Ti(IV) added to samples were 97.6-101.3%.

Influence of marine phytoplankton, transition metals and sunlight on the species distribution of chromium in surface seawater.

The photoreduction of Cr(VI) to Cr(III) by marine phytoplankton (diatoms, red and green algae), with or without the presence of transition metals (Fe(III), Cu(II) and Mn(II)) was studied. The direct influence of marine phytoplankton on the photochemical reduction of Cr(VI) was confirmed for the first time, and two kinds of mechanisms were suggested to be responsible for the species transformation: (a) Cr(VI) in excited state could be reduced by the electron donor in its ground state via photo produced electrons; and (b) the solvated electrons reduce the CrO(4)(2-) anions in their ground state. The conversion ratio of Cr(VI) to Cr(III) increased with increasing algae concentration and irradiation time. Different species of marine phytoplankton were found to have different photo-reducing abilities. The photochemical redox of transition metals could induce the species transformation of chromium. After photoreduction by marine phytoplankton and transition metals, the ratio of Cr(VI) to Cr(III) was in the range of 1.45-2.16 for five green algae (Tetraselmis levis, Chlorella autotrophica, Dunaliella salina, Nannochloropsis sp., and Tetraselmis subcordiformis), and only 0.48 for Phaeodactylum tricornutum (diatom) and 0.71 for Porphyridium purpureum (red alga). The species distribution of chromium in the sunlit surface seawater was greatly affected by combined effects of marine phytoplankton (main contributor) and transition metals; both synergistic and antagonistic effects were observed. The results provided further insights into the species distribution and the biogeochemical cycle of chromium, and have significant implications for the risk assessment of chromium in the sunlit surface seawater.

Speciation of antimony by preconcentration of Sb(III) and Sb(V) in water samples onto nanometer-size titanium dioxide and selective determination by flow injection-hydride generation-atomic absorption spectrometry.

A novel method for prevention of the oxidation of Sb(III) during sample pretreatment, preconcentration of Sb(III) and Sb(V) with nanometer size titanium dioxide (rutile) and speciation analysis of antimony, has been developed. Antimony(III) could be selectively determined by flow injection-hydride generation-atomic absorption spectrometry, coexisting with Sb(V). Trace Sb(III) and Sb(V) were all adsorbed onto 50 m g TiO2 from 500 ml solution at pH 3.0 within 15 min, then eluted by 10 ml of 5 mol/l HCl solution. One eluent was directly used for the analysis of Sb(III); to the other eluent was added 0.5 g KI and 0.2 g thiourea to reduce Sb(V) to Sb(III), then the mixture was used for the determination of total antimony. The antimony(V) content is the mathematical difference of the two concentrations. Detection limits (based on 3sigma of the blank determinations, n=11) of 0.05 ng/ml for Sb(III) and 0.06 ng/ml for Sb(V), were obtained.