Affinity and kinetic modulation of polyamide-DNA interactions by N-modification of the heterocycles.

Synthetic N-methyl imidazole and N-pyrrole containing polyamides (PAs) that can form "stacked" dimers can be programmed to target and bind to specific DNA sequences and control gene expression. To accomplish this goal, the development of PAs with lower molecular mass which allows for the molecules to rapidly penetrate cells and localize in the nucleus, along with increased water solubility, while maintaining DNA binding sequence specificity and high binding affinity is key. To meet these challenges, six novel f-ImPy*Im PA derivatives that contain different orthogonally positioned moieties were designed to target 5'-ACGCGT-3'. The synthesis and biophysical characterization of six f-ImPy*Im were determined by CD, ΔTM, DNase I footprinting, SPR, and ITC studies, and were compared with those of their parent compound, f-ImPyIm. The results gave evidence for the minor groove binding and selectivity of PAs 1 and 6 for the cognate sequence 5'-ACGCGT-3', and with strong affinity, Keq = 2.8 × 10(8) M(-1) and Keq = 6.2 × 10(7) M(-1), respectively. The six novel PAs presented in this study demonstrated increased water solubility, while maintaining low molecular mass, sequence specificity, and binding affinity, addressing key issues in therapeutic development.

Design, synthesis, and DNA binding characteristics of a group of orthogonally positioned diamino, N-formamido, pyrrole- and imidazole-containing polyamides.

Orthogonally positioned diamino/dicationic polyamides (PAs) have good water solubility and enhanced binding affinity, whilst retaining DNA minor groove and sequence specificity compared to their monoamino/monocationic counterparts. The synthesis and DNA binding properties of the following diamino PAs: f-IPI (3a), f-IPP (4), f-PIP (5), and f-PPP (6) are described. P denotes the site where a 1-propylamino group is attached to the N1-position of the heterocycle. Binding of the diamino PAs to DNA was assessed by DNase I footprinting, thermal denaturation, circular dichroism titration, biosensor surface plasmon resonance (SPR), and isothermal titration calorimetry (ITC) studies. According to SPR studies, f-IPI (3a) bound more strongly (K(eq)=2.4×10(8) M(-1)) and with comparable sequence selectivity to its cognate sequence 5'-ACGCGT-3' when compared to its monoamino analog f-IPI (1). The binding of f-IPI (3a) to 5'-ACGCGT-3' via the stacked dimer motif was balanced between enthalpy and entropy, and that was quite different from the enthalpy-driven binding of its monoamino parent f-IPI (1). f-IPP (4) also bound more strongly to its cognate sequence 5'-ATGCAT-3' (K(eq)=7.4×10(6) M(-1)) via the side-by-side stacked motif than its monoamino analog f-IPP (2a). Although f-PPP (6) bound via a 1:1 motif, it bound strongly to its cognate sequence 5'-AAATTT-3' (K(eq)=4.8×10(7) M(-1)), 15-times higher than the binding of its monoamino analog f-PPP (2c), albeit f-PPP bound via the stacked motif. Finally, f-PIP (5) bound to its target sequence 5'-ATCGAT-3' as a stacked dimer and it has the lowest affinity among the diamino PAs tested (Keq <1×10(5) M(-1)). This was about two times lower in affinity than the binding of its monoamino analog f-PIP (2b). The results further demonstrated that the 'core rules' of DNA recognition by monoamino PAs also apply to their diamino analogs. Specifically, PAs that contain a stacked IP core structure bind most strongly (highest binding constants) to their cognate GC doublet, followed by the binding of PAs with a stacked PP structure to two degenerate AT base pairs, and finally the binding of PAs with a PI core to their cognate CG doublet.

Synthesis and DNA binding properties of 1-(3-aminopropyl)-imidazole-containing triamide f-Im*PyIm: a novel diamino polyamide designed to target 5'-ACGCGT-3'.

A novel diamino/dicationic polyamide f-Im(*)PyIm (5) that contains an orthogonally positioned aminopropyl chain on an imidazole (Im(*)) moiety was designed to target 5'-ACGCGT-3'. The DNA binding properties of the diamino polyamide 5, determined by CD, ΔT(M), DNase I footprinting, SPR, and ITC studies, were compared with those of its monoamino/monocationic counterpart f-ImPyIm (1) and its diamino/dicationic isomer f-ImPy(*)Im (2), which has the aminopropyl group attached to the central pyrrole unit (Py(*)). The results gave evidence for the minor groove binding and selectivity of polyamide 5 for the cognate sequence 5'-ACGCGT-3', and with strong affinity (K(eq)=2.3×10(7) M(-1)). However, the binding affinities varied according to the order: f-ImPy(*)Im (2)>f-ImPyIm (1)≥f-Im(*)PyIm (5) confirming that the second amino group can improve affinity, but its position within the polyamide can affect affinity.

Novel diamino imidazole and pyrrole-containing polyamides: Synthesis and DNA binding studies of mono- and diamino-phenyl-ImPy*Im polyamides designed to target 5'-ACGCGT-3'.

Pyrrole- and imidazole-containing polyamides are widely investigated as DNA sequence selective binding agents that have potential use as gene control agents. The key challenges that must be overcome to realize this goal is the development of polyamides with low molar mass so the molecules can readily diffuse into cells and concentrate in the nucleus. In addition, the molecules must have appreciable water solubility, bind DNA sequence specifically, and with high affinity. It is on this basis that the orthogonally positioned diamino/dicationic polyamide Ph-ImPy*Im 5 was designed to target the sequence 5'-ACGCGT-3'. Py* denotes the pyrrole unit that contains a N-substituted aminopropyl pendant group. The DNA binding properties of diamino polyamide 5 were determined using a number of techniques including CD, ΔT(M), DNase I footprinting, SPR and ITC studies. The effects of the second amino moiety in Py* on DNA binding affinity over its monoamino counterpart Ph-ImPyIm 3 were assessed by conducting DNA binding studies of 3 in parallel with 5. The results confirmed the minor groove binding and selectivity of both polyamides for the cognate sequence 5'-ACGCGT-3'. The diamino/dicationic polyamide 5 showed enhanced binding affinity and higher solubility in aqueous media over its monoamino/monocationic counterpart Ph-ImPyIm 3. The binding constant of 5, determined from SPR studies, was found to be 1.5 × 10(7)M(-1), which is ∼3 times higher than that for its monoamino analog 3 (4.8 × 10(6)M(-1)). The affinity of 5 is now approaching that of the parent compound f-ImPyIm 1 and its diamino equivalent 4. The advantages of the design of diamino polyamide 5 over 1 and 4 are its sequence specificity and the ease of synthesis compared to the N-terminus pyrrole analog 2.

Hx, a novel fluorescent, minor groove and sequence specific recognition element: design, synthesis, and DNA binding properties of p-anisylbenzimidazole-imidazole/pyrrole-containing polyamides.

With the aim of incorporating a recognition element that acts as a fluorescent probe upon binding to DNA, three novel pyrrole (P) and imidazole (I)-containing polyamides were synthesized. The compounds contain a p-anisylbenzimidazolecarboxamido (Hx) moiety attached to a PP, IP, or PI unit, giving compounds HxPP (2), HxIP (3), and HxPI (4), respectively. These fluorescent hybrids were tested against their complementary nonfluorescent, non-formamido tetraamide counterparts, namely, PPPP (5), PPIP (6), and PPPI (7) (cognate sequences 5'-AAATTT-3', 5'-ATCGAT-3', and 5'-ACATGT-3', respectively). The binding affinities for both series of polyamides for their cognate and noncognate sequences were ascertained by surface plasmon resonance (SPR) studies, which revealed that the Hx-containing polyamides gave binding constants in the 10(6) M(-1) range while little binding was observed for the noncognates. The binding data were further compared to the corresponding and previously reported formamido-triamides f-PPP (8), f-PIP (9), and f-PPI (10). DNase I footprinting studies provided additional evidence that the Hx moiety behaved similarly to two consecutive pyrroles (PP found in 5-7), which also behaved like a formamido-pyrrole (f-P) unit found in distamycin and many formamido-triamides, including 8-10. The biophysical characterization of polyamides 2-7 on their binding to the abovementioned DNA sequences was determined using thermal melts (ΔT(M)), circular dichroism (CD), and isothermal titration calorimetry (ITC) studies. Density functional calculations (B3LYP) provided a theoretical framework that explains the similarity between PP and Hx on the basis of molecular electrostatic surfaces and dipole moments. Furthermore, emission studies on polyamides 2 and 3 showed that upon excitation at 322 nm binding to their respective cognate sequences resulted in an increase in fluorescence at 370 nm. These low molecular weight polyamides show promise for use as probes for monitoring DNA recognition processes in cells.

Design, synthesis and DNA binding properties of orthogonally positioned diamino containing polyamide f-IPI.

An orthogonally positioned diamino/dicationic polyamide f-IPI 2 was synthesized. It has enhanced binding affinity, and it showed comparable sequence specificity to its monoamino/monocationic counterpart f-IPI 1. Results from CD and DNase I footprinting studies confirmed the minor groove binding and selectivity of polyamides 1 and 2 for the cognate sequence 5'-ACGCGT-3'. SPR studies provided their binding constants: 2.4 × 10(8)M(-1) for diamino 2, which is ∼4 times higher than 5.4 × 10(7)M(-1) for its monoamino analogue 1.

DNA recognition: design, synthesis and biophysical characteristics of pyrrole(H) based polyamides.

N-Methyl imidazole (Im) and N-methyl pyrrole (Py)-containing polyamides that can form stacked dimers can be programmed to target specific DNA sequences in the minor groove of DNA and control gene expression. Polyamides are being investigated as potential medicinal agents for treating diseases including cancer. The naturally occurring polyamide distamycin binds as a dimer in the minor groove of DNA and recognizes sequences rich in A/T and T/A base pairs indiscriminately. Synthetic analogs of distamycin that incorporate N-methylimidazole into the heterocyclic core have been shown to bind to G/C rich sequences with a high degree of specificity. The purpose of this study is to investigate the behavior of polyamides containing the 2,5-linked N-methylpyrrole-2-carboxamide or pyrrole(H) [Py(H)] moiety upon binding to DNA. The synthesis and biophysical characteristics of two polyamides PyPyPyPy(H) 2 and ImPyPyPy(H) 3 designed to test the binding preference of a Py/Pyrrole(H) pairing [Py/Py(H)] and a [Im/Py(H)] is described. Studies utilizing circular dichroism, thermal denaturation (ΔT(M)), biosensor-surface plasmon resonance and DNase I footprinting show that an [Im/Py(H), 3] pairing prefers a G/C or C/G pairing whilst a [Py/Py(H), 2] pairing tolerates A/T or T/A base pairs and avoids a G/C base pair.