RESUMEN
Background: Ivabradine is approved for heart rate reduction in patients with stable symptomatic heart failure (HF). The United States Food and Drug Administration and Taiwan Central Health Insurance Agency approved the use of ivabradine for patients with chronic stable HF with sinus rhythm, but it has not yet been approved for patients with acute decompensated HF or with atrial fibrillation (AF). Objectives: To investigate whether short-term ivabradine use is feasible in critically ill patients with AF and rapid ventricular response (RVR). Methods: This study retrospectively analyzed 23 patients admitted to an intensive care unit with acute HF and AF-RVR who received ivabradine. All patients initially received a slow IV of amiodarone. Other medications for HF were prescribed according to current HF guidelines. The time taken for ivabradine to reduce HR to 80 beats per minute, referred to as "Time to 80," was measured in each patient. Results: Overall, 69.6 % (16/23) of the patients had New York Heart Association functional class IV HF. In addition, 60.9% (14/23) of the patients required endotracheal intubation and ventilatory support, with more than half receiving vasopressor treatment to manage hypotension. Five patients died during the study period. The surviving patients had a significantly shorter "Time to 80" compared to those who did not survive (p = 0.037). Conclusions: Adding ivabradine to standard treatment might be feasible for critically ill patients with AF and tachycardia. The finding that surviving patients had a shorter "Time to 80" duration than those who did not survive may have clinical implications. However, further investigations are needed to assess its clinical utility.
RESUMEN
BACKGROUND: Monitoring Intraabdominal Pressure (IAP) is essential in critical care, as elevated IAP can lead to severe complications, including Abdominal Compartment Syndrome (ACS). Advances in technology, such as digital capsules, have opened new avenues for measuring IAP non-invasively. This study assesses the feasibility and effectiveness of using a capsular device for IAP measurement in an animal model. METHOD: In our controlled experiment, we anesthetized pigs and simulated elevated IAP conditions by infusing CO2 into the peritoneal cavity. We compared IAP measurements obtained from three different methods: an intravesical catheter (IAPivp), a capsular device (IAPdot), and a direct peritoneal catheter (IAPdir). The data from these methods were analyzed to evaluate agreement and accuracy. RESULTS: The capsular sensor (IAPdot) provided continuous and accurate detection of IAP over 144 h, with a total of 53,065,487 measurement triplets recorded. The correlation coefficient (R²) between IAPdot and IAPdir was excellent at 0.9241, demonstrating high agreement. Similarly, IAPivp and IAPdir showed strong correlation with an R² of 0.9168. CONCLUSION: The use of capsular sensors for continuous and accurate assessment of IAP marks a significant advancement in the field of critical care monitoring. The high correlation between measurements from different locations and methods underscores the potential of capsular devices to transform clinical practices by providing reliable, non-invasive IAP monitoring.
Asunto(s)
Estudios de Factibilidad , Hipertensión Intraabdominal , Animales , Porcinos , Hipertensión Intraabdominal/diagnóstico , Hipertensión Intraabdominal/fisiopatología , Monitoreo Fisiológico/métodos , Monitoreo Fisiológico/instrumentación , Presión , Cavidad Abdominal/fisiología , Cavidad Abdominal/fisiopatología , Reproducibilidad de los Resultados , Modelos Animales de EnfermedadRESUMEN
The current bottleneck in the development of efficient photocatalysts for hydrogen evolution is the limited availability of high-performance acceptor units. Over the past nine years, dibenzo[b,d]thiophene sulfone (DBS) has been the preferred choice for the acceptor unit. Despite extensive exploration of alternative structures as potential replacements for DBS, a superior substitute remains elusive. In this study, a symmetry-breaking strategy was employed on DBS to develop a novel acceptor unit, BBTT-1SO. The asymmetric structure of BBTT-1SO proved beneficial for increasing multiple moment and polarizability. BBTT-1SO-containing polymers showed higher efficiencies for hydrogen evolution than their DBS-containing counterparts by up to 166 %. PBBTT-1SO exhibited an excellent hydrogen evolution rate (HER) of 222.03â mmol g-1 h-1 and an apparent quantum yield of 27.5 % at 500â nm. Transient spectroscopic studies indicated that the BBTT-1SO-based polymers facilitated electron polaron formation, which explains their superior HERs. PBBTT-1SO also showed 14 % higher HER in natural seawater splitting than that in deionized water splitting. Molecular dynamics simulations highlighted the enhanced water-PBBTT-1SO polymer interactions in salt-containing solutions. This study presents a pioneering example of a substitute acceptor unit for DBS in the construction of high-performance photocatalysts for hydrogen evolution.
RESUMEN
Purpose: To develop a rib and clavicle fracture detection model for chest radiographs in trauma patients using a deep learning (DL) algorithm. Materials and methods: We retrospectively collected 56 145 chest X-rays (CXRs) from trauma patients in a trauma center between August 2008 and December 2016. A rib/clavicle fracture detection DL algorithm was trained using this data set with 991 (1.8%) images labeled by experts with fracture site locations. The algorithm was tested on independently collected 300 CXRs in 2017. An external test set was also collected from hospitalized trauma patients in a regional hospital for evaluation. The receiver operating characteristic curve with area under the curve (AUC), accuracy, sensitivity, specificity, precision, and negative predictive value of the model on each test set was evaluated. The prediction probability on the images was visualized as heatmaps. Results: The trained DL model achieved an AUC of 0.912 (95% CI 87.8 to 94.7) on the independent test set. The accuracy, sensitivity, and specificity on the given cut-off value are 83.7, 86.8, and 80.4, respectively. On the external test set, the model had a sensitivity of 88.0 and an accuracy of 72.5. While the model exhibited a slight decrease in accuracy on the external test set, it maintained its sensitivity in detecting fractures. Conclusion: The algorithm detects rib and clavicle fractures concomitantly in the CXR of trauma patients with high accuracy in locating lesions through heatmap visualization.
RESUMEN
This study demonstrates a novel use of the U-Net convolutional neural network (CNN) for modeling pixel-based electrostatic potential distributions in GaN metal-insulator-semiconductor high-electron mobility transistors (MIS-HEMTs) with various gate and source field plate designs and drain voltages. The pixel-based images of the potential distribution are successfully modeled from the developed U-Net CNN with an error of less than 1% error relative to a TCAD simulated reference of a 500-V electrostatic potential distribution in the AlGaN/GaN interface. Furthermore, the modeling time of potential distributions by U-Net takes about 80 ms. Therefore, the U-Net CNN is a promising approach to efficiently model the pixel-based distributions characteristics in GaN power devices.
RESUMEN
A demonstration of an off-chip capacitance array sensor with a limit of detection of 1 µM trimethylamine N-oxide (TMAO) to diagnose a chronic metabolism disease in urine is presented. The improved Cole-Cole model is employed to determine the parameters of R_catalyzed, C_catalyzed, and Rp_catalyzed, enabling the prediction of the catalytic resistance of enzyme, reduction effects of the analyte, and characterize the small signal alternating current properties of ionic strength caused by catalysis. Based on the standard solutions, we investigate the effects of pixel geometry parameters, driving electrode width, and sensing electrode width on the electrical field change of the off-chip capacitance sensor; the proposed off-chip sensor with readout system-on-chip exhibits a high sensitivity of 21 analog-to-digital converter counts/µM TMAO (or 2.5 mV/µM TMAO), response time of 1 s, repetition of 98.9%, and drift over time of 0.5 mV. The proposed off-chip sensor effectively discriminates TMAO in a phosphate-buffered saline solution based on minute changes in capacitance induced by the TorA enzyme, resulting in a discernible 2.15% distinction. These measurements have been successfully corroborated using the conventional cyclic voltammetry method, demonstrating a mere 0.024% variance. The off-chip sensor is crafted with a specific focus on detecting TMAO, achieved by excluding any reduction reactions between the TMAO-specific enzyme TorA and the compounds creatine and creatinine present in urine. This deliberate omission ensures that the sensor's attention remains solely on TMAO, thereby enhancing its precision in achieving accurate and reliable TMAO detection.
Asunto(s)
Líquidos Corporales , Enfermedades Cardiovasculares , Trombosis , Humanos , Metilaminas , Líquidos Corporales/metabolismoRESUMEN
Converting solar energy into hydrogen energy using conjugated polymers (CP) is a promising solution to the energy crisis. Improving water solubility plays one of the critical factors in enhancing the hydrogen evolution rate (HER) of CP photocatalysts. In this study, a novel concept of incorporating hydrophilic side chains to connect the backbones of CPs to improve their HER is proposed. This concept is realized through the polymerization of carbazole units bridged with octane, ethylene glycol, and penta-(ethylene glycol) to form three new side-chain-braided (SCB) CPs: PCz2S-OCt, PCz2S-EG, and PCz2S-PEG. Verified through transient absorption spectra, the enhanced capability of PCz2S-PEG for ultrafast electron transfer and reduced recombination effects has been demonstrated. Small- and wide-angle X-ray scattering (SAXS/WAXS) analyses reveal that these three SCB-CPs form cross-linking networks with different mass fractal dimensions (f) in aqueous solution. With the lowest f value of 2.64 and improved water/polymer interfaces, PCz2S-PEG demonstrates the best HER, reaching up to 126.9 µmol h-1 in pure water-based photocatalytic solution. Moreover, PCz2S-PEG exhibits comparable performance in seawater-based photocatalytic solution under natural sunlight. In situ SAXS analysis further reveals nucleation-dominated generation of hydrogen nanoclusters with a size of ≈1.5 nm in the HER of PCz2S-PEG under light illumination.
RESUMEN
(1) Background: Design thinking is a problem-solving approach that has been applied in various sectors, including healthcare and medical education. While deep learning (DL) algorithms can assist in clinical practice, integrating them into clinical scenarios can be challenging. This study aimed to use design thinking steps to develop a DL algorithm that accelerates deployment in clinical practice and improves its performance to meet clinical requirements. (2) Methods: We applied the design thinking process to interview clinical doctors and gain insights to develop and modify the DL algorithm to meet clinical scenarios. We also compared the DL performance of the algorithm before and after the integration of design thinking. (3) Results: After empathizing with clinical doctors and defining their needs, we identified the unmet need of five trauma surgeons as "how to reduce the misdiagnosis of femoral fracture by pelvic plain film (PXR) at initial emergency visiting". We collected 4235 PXRs from our hospital, of which 2146 had a hip fracture (51%) from 2008 to 2016. We developed hip fracture DL detection models based on the Xception convolutional neural network by using these images. By incorporating design thinking, we improved the diagnostic accuracy from 0.91 (0.84-0.96) to 0.95 (0.93-0.97), the sensitivity from 0.97 (0.89-1.00) to 0.97 (0.94-0.99), and the specificity from 0.84 (0.71-0.93) to 0.93(0.990-0.97). (4) Conclusions: In summary, this study demonstrates that design thinking can ensure that DL solutions developed for trauma care are user-centered and meet the needs of patients and healthcare providers.
RESUMEN
Conjugated polymers (CPs) have recently gained increasing attention as photocatalysts for sunlight-driven hydrogen evolution. However, they suffer from insufficient electron output sites and poor solubility in organic solvents, severely limiting their photocatalytic performance and applicability. Herein, solution-processable all-acceptor (A1 -A2 )-type CPs based on sulfide-oxidized ladder-type heteroarene are synthesized. A1 -A2 -type CPs showed upsurging efficiency improvements by two to three orders of magnitude, compared to their donor-acceptor -type CP counterparts. Furthermore, by seawater splitting, PBDTTTSOS exhibited an apparent quantum yield of 18.9% to 14.8% at 500 to 550 nm. More importantly, PBDTTTSOS achieved an excellent hydrogen evolution rate of 35.7 mmol h-1 g-1 and 150.7 mmol h-1 m-2 in the thin-film state, which is among the highest efficiencies in thin film polymer photocatalysts to date. This work provides a novel strategy for designing polymer photocatalysts with high efficiency and broad applicability.
RESUMEN
(1) Background: Hip degenerative disorder is a common geriatric disease is the main causes to lead to total hip replacement (THR). The surgical timing of THR is crucial for post-operative recovery. Deep learning (DL) algorithms can be used to detect anomalies in medical images and predict the need for THR. The real world data (RWD) were used to validate the artificial intelligence and DL algorithm in medicine but there was no previous study to prove its function in THR prediction. (2) Methods: We designed a sequential two-stage hip replacement prediction deep learning algorithm to identify the possibility of THR in three months of hip joints by plain pelvic radiography (PXR). We also collected RWD to validate the performance of this algorithm. (3) Results: The RWD totally included 3766 PXRs from 2018 to 2019. The overall accuracy of the algorithm was 0.9633; sensitivity was 0.9450; specificity was 1.000 and the precision was 1.000. The negative predictive value was 0.9009, the false negative rate was 0.0550, and the F1 score was 0.9717. The area under curve was 0.972 with 95% confidence interval from 0.953 to 0.987. (4) Conclusions: In summary, this DL algorithm can provide an accurate and reliable method for detecting hip degeneration and predicting the need for further THR. RWD offered an alternative support of the algorithm and validated its function to save time and cost.
RESUMEN
The unique properties of self-healing materials hold great potential in battery systems, which can exhibit excellent deformability and return to its original shape after cycling. Herein, a Cu3 BiS3 anode material with self-healing mechanisms is proposed for use in ultrastable potassium-ion battery (PIB) and potassium-ion hybrid capacitor (PIHC). Different from the binder design, Cu3 BiS3 anode can exhibit the dual advantages of phase and morphological reversibility, further remaining original property after potassiation/depotassiation and exhibiting ultrastable cycling performance. The reversible electrochemical reconstruction during the continuous charge/discharge processes is beneficial to maintain the structure and function of the material. Furthermore, the conversion reactions during the charge and discharge process produce two advantages: i) suppressing the shuttle effect due to the formation of the heterostructure interface between Cu (111) and Bi (012); ii) Cu can avoid the agglomeration of Bi nanoparticles (NPs), further improving the electrochemical performance and long-cycle stability of the Cu3 BiS3 electrode. As a result, the Cu3 BiS3 electrode not only exhibits a long cycle life in half cells, but also 2000 cycles and 12000 cycles in PIB and PIHC full cells, respectively.
RESUMEN
In this work, we demonstrated the thermal analysis of different flip-chip bonding designs for high power GaN HEMT developed for power electronics applications, such as power converters or photonic driver applications, with large gate periphery and chip size, as well as an Au metal heat-spreading layer deposited on top of a planarized dielectric/passivation layer above the active region. The Au bump patterns can be designed with high flexibility to provide more efficient heat dissipation from the large GaN HEMT chips to an AlN package substrate heat sink with no constraint in the alignment between the HEMT cells and the thermal conduction bumps. Steady-state thermal simulations were conducted to study the channel temperatures of GaN HEMTs with various Au bump patterns at different levels of current and voltage loadings, and the results were compared with the conventional face-up GaN die bonding on an AlN package substrate. The simulations were started from a single finger isolated HEMT cell and then extended to multiple fingers HEMT cells (total gate width > 40 mm) to investigate the "thermal cross-talk" effect from neighboring devices. Thermal analysis of the GaN HEMT under pulse operation was also performed to better reflect the actual conditions in power conversion or pulsed laser driver applications. Our analysis provides a combinational assessment of power GaN HEMT dies under a working condition (e.g., 1MHz, 25% duty cycle) with different flip chip packaging schemes. The analysis indicated that the channel temperature rise (∆T) of a HEMT cell in operation can be reduced by 44~46% by changing from face-up die bonding to a flip-chip bonding scheme with an optimized bump pattern design.
RESUMEN
MEMS based 3D double stacked tower pixel biosensor 10 × 10 array with integration of readout circuit for detection of saliva pH ion is demonstrated. The pixel biosensor comprised a driving electrode, sensing electrode and double stack tower pixel structure. The sensitivity of double stacked tower biosensor can be auxiliary enhanced by proposed lower-jitter low dropout regulator circuit and dual offset cancellation comparator. The double stacked tower sensor is fabricated by MEMS backend-of-line CMOS process, it is compatible with CMOS frontend readout circuits and integrated as a system-on-chip (SoC). The double stacked tower pixel by MEMS process is to obtain a larger volume ratio of charge groups in a pixel of biosensor to enhance the sensitivity and linearity for ion detection. With the double stacked tower structure in biosensor, the sensitivity is improved by 31% than that of single tower structure proved by simulation. A wide-range linearity from pH 2.0 to pH 8.3, high sensitivity of -21 ADC counts/pH (or 212 mV/pH), response time of 5 s, repetition of 98.9%, and drift over time of 0.5 mV are achieved. Furthermore, the proposed biosensor was performed to confirm the artificial saliva from healthy gingiva, chronic gingivitis and chronic periodontitis, the measured ADC counts from proposed biosensor SoC was in consistent of that measured cyclic voltametric (CV) method very well. The proposed 3D double stack tower biosensor and readout circuit can be further integrated with internet-of-thing (IoT) device and NFC for data transmission for continuous pH sensing to facilitate the chronic gingiva disease health care at home.
Asunto(s)
Técnicas Biosensibles , Periodontitis Crónica , Humanos , Diseño de Equipo , Concentración de Iones de Hidrógeno , BiomarcadoresRESUMEN
Perovskite solar cells (PeSCs) were fabricated by using Cs x FA1-x PbI3-x Cl x as the photoactive layer, and the effects of different proportions of cesium chloride (CsCl)/formamidinium iodide on perovskites were investigated. Cesium (Cs) can stabilize the α phase of the perovskite, while chlorine (Cl) can increase the size and crystallinity of perovskite crystals and reduce non-radiative cladding, thereby improving the performance of the overall device. The maximum power conversion efficiency (PCE) measured for Cs0.2FA0.8PbI2.8Cl0.2-based PeSCs was 18.9%. To further improve the photovoltaic characteristics of PeSCs, Cs0.2FA0.8PbI2.8Cl0.2-based PeSCs were introduced into different concentrations of phenethylammonium iodide (PEAI) to modify the interface between the NiO x hole transport layer (HTL) and the perovskite photoactive layer, which can simultaneously promote excellent crystallinity of the perovskite layer and passivated interfacial defects, reducing recombination near the perovskite/HTL interface in PeSCs, thereby increasing the efficiency of the device. Compared with the control Cs0.2FA0.8PbI2.8Cl0.2-based PeSC, the PCE of PeSC with the PEAI (10 mg/mL)-modified NiO x /perovskite interface increased significantly from 18.9 to 20.2%.
RESUMEN
Photocatalytic water splitting is attracting considerable interest because it enables the conversion of solar energy into hydrogen for use as a zero-emission fuel or chemical feedstock. Herein, we present a universal approach for inserting hydrophilic non-conjugated segments into the main-chain of conjugated polymers to produce a series of discontinuously conjugated polymer photocatalysts. Water can effectively be brought into the interior through these hydrophilic non-conjugated segments, resulting in effective water/polymer interfaces inside the bulk discontinuously conjugated polymers in both thin-film and solution. Discontinuously conjugated polymer with 10 mol% hexaethylene glycol-based hydrophilic segments achieves an apparent quantum yield of 17.82% under 460 nm monochromatic light irradiation in solution and a hydrogen evolution rate of 16.8 mmol m-2 h-1 in thin-film. Molecular dynamics simulations show a trend similar to that in experiments, corroborating that main-chain engineering increases the possibility of a water/polymer interaction. By introducing non-conjugated hydrophilic segments, the effective conjugation length is not altered, allowing discontinuously conjugated polymers to remain efficient photocatalysis.
RESUMEN
BACKGROUND: Previous studies have shown that transcatheter aortic valve implantation is the best alternative therapy to surgical aortic valve replacement in high-risk surgical patients with aortic stenosis. However, it is not clear whether transcatheter aortic valve implantation can be utilized in low-risk surgical patients with aortic stenosis. This studyaimed to evaluate the safety and efficacy of transcatheter aortic valve implantation in low-risk patients. METHODS: From the outset of our initiative until April 2022, PubMed, EMBASE, and the Cochrane database were thoroughly searched, yielding the selection of 3 randomized controlled trials including 2644 patients with aortic stenosis, to assess outcome measures at distinct follow-up time. RESULTS: The mean Society of Thoracic Surgeons Predicted Risk of Mortality score of patients was 2.2. At the 30-day and 1-year follow-up, transcatheter aortic valve implan- tation was associated with a lower incidence of all-cause mortality, cardiovascular mor- tality, acute kidney injury (stage 2 or 3), life-threatening or significant bleeding, and new atrial fibrillation but an increased risk of permanent pacemaker implantation. At the 2-year follow-up, transcatheter aortic valve implantation only had an advantage in new atrial fibrillation (relative risk, 0.27; 95% CI, 0.14-0.51; P < .0001), with no significant differ- ence in all-cause mortality or cardiovascular mortality. CONCLUSIONS: For low-risk surgical patients with aortic stenosis, compared to surgical aortic valve replacement, transcatheter aortic valve implantation was associated with lower all-cause mortality at 30-day follow-up and lower cardiovascular mortality at 1-year follow-up. Except for the advantages in new atrial fibrillation, transcatheter aor- tic valve implantation had no significant impact on mortality at 2-year follow-up.
Asunto(s)
Estenosis de la Válvula Aórtica , Reemplazo de la Válvula Aórtica Transcatéter , Humanos , Válvula Aórtica/cirugía , Estenosis de la Válvula Aórtica/cirugía , Fibrilación Atrial/cirugía , Estudios de Seguimiento , Riesgo , Reemplazo de la Válvula Aórtica Transcatéter/efectos adversos , Resultado del TratamientoRESUMEN
Phosphatidylinositol (PI) 4,5-bisphosphate (PIP2) is involved in many biological functions. However, the mechanisms of PIP2 in collective cell migration remain elusive. This study highlights the regulatory role of cytidine triphosphate synthase (CTPsyn) in collective border cell migration through regulating the asymmetrical distribution of PIP2. We demonstrated that border cell clusters containing mutant CTPsyn cells suppressed migration. CTPsyn was co-enriched with Actin at the leading edge of the Drosophila border cell cluster where PIP2 was enriched, and this enrichment depended on the CTPsyn activity. Genetic interactions of border cell migration were found between CTPsyn mutant and genes in PI biosynthesis. The CTPsyn reduction resulted in loss of the asymmetric activity of endocytosis recycling. Also, genetic interactions were revealed between components of the exocyst complex and CTPsyn mutant, indicating that CTPsyn activity regulates the PIP2-related asymmetrical exocytosis activity. Furthermore, CTPsyn activity is essential for RTK-polarized distribution in the border cell cluster. We propose a model in which CTPsyn activity is required for the asymmetrical generation of PIP2 to enrich RTK signaling through endocytic recycling in collective cell migration.
Asunto(s)
Proteínas de Drosophila , Drosophila , Animales , Ligasas de Carbono-Nitrógeno , Movimiento Celular/genética , Drosophila/genética , Drosophila/metabolismo , Proteínas de Drosophila/genética , Proteínas de Drosophila/metabolismo , Drosophila melanogaster/metabolismoRESUMEN
Hypertension and pain are both prevalent conditions in the older adult population. We aimed to report the prevalence of pain discomforts and investigated the association between hypertension and pain discomforts among older adults in the United States. Data from the 2011 National Health and Aging Trends Study were analyzed. In-person interviews were conducted in 7601 adults ages ≥ 65 years. Prevalence of bothersome pain, activity-limiting pain, locations of pain and usage of pain medicine were evaluated. Demographics, comorbidities, and other covariates were compared between older adults with hypertension and those without. Multivariate regression was further performed to yield adjusted odd ratios. Among 6825 older adults, 4533 of them had a history of hypertension while 2272 of them had not. Prevalence of bothersome pain (57.12% versus 44.81%, p < 0.001) and activity-limiting pain (56.21% versus 46.12%, p < 0.001) were significantly higher in the hypertension group. After adjusting for all covariates, hypertension demonstrated a significant association with activity-limiting pain (OR 1.63, 95% CI 1.06 to 2.52, p = 0.02). In conclusion, pain was more prevalent in older Americans with hypertension. The positive association between hypertension and pain suggested that routine pain assessment and proper treatment would be required to improve the function and quality of life among older adults especially with hypertension.
Asunto(s)
Hipertensión , Vida Independiente , Anciano , Humanos , Hipertensión/complicaciones , Hipertensión/epidemiología , Dolor/epidemiología , Prevalencia , Calidad de Vida , Estados Unidos/epidemiologíaRESUMEN
This study was designed to examine the most up-to-date evidence about how low plasma selenium (Se) concentration affects clinical outcomes, such as mortality, infectious complications, and length of ICU or hospital stay, in patients with major trauma. We searched three databases (MEDLINE, EMBASE, and Web of Science) with the following keywords: "injury", "trauma", "selenium", and "trace element". Only records written in English published between 1990 and 2021 were included for analysis. Four studies were eligible for meta-analyses. The results of the meta-analysis showed that a low serum selenium level did not exert a negative effect on the mortality rate (OR 1.07, 95% CI: 0.32, 3.61, p = 0.91, heterogeneity, I2 = 44%). Regarding the incidence of infectious complications, there was no statistically significant deficit after analyses of the four studies (OR 1.61, 95% CI: 0.64, 4.07, p = 0.31, heterogeneity, I2 = 70%). There were no differences in the days spent in the ICU (difference in means (MD) 1.53, 95% CI: -2.15, 5.22, p = 0.41, heterogeneity, I2 = 67%) or the hospital length of stay (MD 6.49, 95% CI: -4.05, 17.02, p = 0.23, heterogeneity, I2 = 58%) in patients with low serum Se concentration. A low serum selenium level after trauma is not uncommon. However, it does not negatively affect mortality and infection rate. It also does not increase the overall length of ICU and hospital stays.
Asunto(s)
Selenio , Humanos , Incidencia , Unidades de Cuidados Intensivos , Tiempo de Internación , PronósticoRESUMEN
AIM: To present an image-processing measurement algorithm to evaluate the transfer accuracy of indirect bonding (IDB) trays, exemplified by a CAD/CAM-based IDB tray integrated into a digital orthodontic workflow. MATERIALS AND METHODS: Plaster casts of 24 patients with full dentition and different malocclusions were scanned with an intraoral scanner (Trios; 3Shape, Copenhagen, Denmark) to obtain digital models, which served for the virtual placement of orthodontic brackets in simulation software (OnyxCeph; Image Instruments, Chemnitz, Germany). The resulting STL files were sent to a dental laboratory (CA Digital; Hilden, Germany) for the production of INDIVIDUA IDB trays. These trays were used to transfer the brackets to the respective plaster casts. Finally, a second scan was performed to record the actual bracket positions. The transfer accuracy was then analyzed by a measurement algorithm scripted to automation, which calculated the deviations of the planned and real bracket positions with a local best-fit alignment, resulting in three linear and three angular measurements for each bracket. RESULTS: In total, 622 brackets and tubes were transferred successfully. The presented algorithm analyzed the transfer accuracy and demonstrated that the linear measurements were 98.3% within the range of the American Board of Orthodontics standard. The angular measurements were 86.7% within this range when the INDIVIDUA IDB tray was used. CONCLUSION: Scripted measurement algorithms facilitated the evaluation of present and future materials and designs for IDB trays to obtain an efficient solution for orthodontic practice. The INDIVIDUA IDB tray is a digital alternative to conventional IDB trays (Int J Comput Dent 2022;25(3):295-302; doi: 10.3290/j.ijcd.b2599775).