RESUMEN
In classical guitar acoustic spectra, the lowest frequency body mode's amplitude often significantly surpasses that of the string overtones. However, the characteristics of the body mode have not been systematically utilized to quantitatively represent the timbre of classical guitars. In this study, we propose a quantitative method for describing the body mode, which can effectively differentiate the timbre of classical guitars. Our approach involves three key parameters presented in a three-dimensional space, as follows: the frequency and quality factors of the body mode, along with the amplitude ratio of the plucked string note to the body mode in the soundboard's vibration spectrum. This representation allows for the visualization, quantitative comparison, and classification of the body mode note and damping properties across classical guitars. The differences in body mode among guitars can be analyzed quantitatively using Euclidean distance.
RESUMEN
Cesium (Cs) incorporation and sulfurization on copper indium gallium selenide solar cells are the keys to improving the device quality. In this study, we explore the impact of Cs modulation on sulfur-containing Cu(In, Ga)(S, Se)2 (CIGSSe) absorbers, resulting in a performance increase of over 2%, reaching 18.11%. The improvement stems from a widened surface bandgap, grain boundary (GB) passivation, and a moderate injection blocking layer. The surface bandgap widens from 1.44 to 2.63 eV after Cs incorporation, confirmed by ultraviolet photoelectron spectroscopy (UPS) and low-energy inverse photoemission spectroscopy (LEIPS) analysis. Cs presence and S depletion in GBs suggest a new phase that might mitigate carrier recombination. Heightened Cs incorporation introduces interface issues, including an augmented injection blocking layer and interface defects. Our study offers insights into interface challenges and GB engineering strategies in Cs-treated CIGSSe solar cells, illuminating the multifaceted impact of heavy alkali metal ion Cs in CIGS-based photovoltaics.
RESUMEN
Wound healing is a complex biological process crucial for restoring tissue integrity and preventing infections. The development of advanced materials that facilitate and expedite the wound-healing process has been a focal point in biomedical research. In this study, we aimed to enhance the wound-healing potential of hydrogel scaffolds by incorporating graphene oxide and poly (ethylene glycol) methyl ether methacrylate (MEO2MA). Various masses of graphene oxide were added to MEO2MA hydrogels via free radical polymerisation. Comprehensive characterizations, encompassing mechanical properties, and biocompatibility assays, were conducted to evaluate the hydrogels' suitability for wound healing. In vitro experiments demonstrated that the graphene oxide-based hydrogels exhibited a proper swelling degree and tensile strength, responding effectively to moisture conditions and adhesiveness for wound healing. Notably, the tensile strength significantly increased to 626 kPa in the graphene oxide hydrogels. Biocompatibility assessments revealed that the graphene oxide/MEO2MA hydrogels were non-toxic to human dermal fibroblast cell growth, with no significant difference in cell viability observed in the graphene oxide/MEO2MA hydrogel (H-HG) group. In a rat skin experiment, the wound-healing rate of the hydrogel incorporating graphene oxide surpassed that of the pristine hydrogel after a 15-day treatment, achieving over 95% wound closure in the H-HG group. The histopathological analysis further supported the efficacy of the H-HG hydrogel dressing in promoting more effective tissue regeneration. These results collectively highlight the potential of the graphene oxide/MEO2MA hydrogel scaffold as a promising dressing for medical applications.
RESUMEN
Known for its water solubility, flexibility, strong adhesion, and eco-friendly nature, polyvinyl alcohol (PVA) is widely used in various industries. In the medical field, it is used for applications such as creating bandages and orthopaedic devices. Incorporating sodium alginate (SA) into PVA membranes enhances their structural integrity, breathability, and permeability, thereby minimising the risk of cellular damage in the wound zone. Moreover, the addition of tamanu oil (C alophyllum inophyllum L.) and silver nanoparticles, both of which are known for their antibacterial properties and benefits in traditional wound healing, further enhances the membranes' wound-healing effectiveness. Following production, the membranes undergo a series of tests designed to evaluate their physical properties as well as their antioxidant and antibacterial capabilities. Subsequently, in vitro testing is conducted using human skin cells; experiments on Wistar rats are then performed. Numerous experiments have consistently demonstrated that the performance of polyvinyl alcohol/sodium alginate/tamanu oil (PVA/SA/Oil) membrane is superior to that of polyvinyl alcohol/sodium alginate/tamanu oil/silver nanoparticles (PVA/SA/Oil/Ag NP) membrane. Specifically, the polyvinyl alcohol/sodium alginate (PVA/SA) combination exhibits an impressive wound-healing rate of 98.82% after 15 days, with cells maintaining a high viability of 92% in a nourishing environment. Moreover, these membranes exhibit exceptional resistance to the oxidation of free radicals, surpassing the 70% threshold, and they possess antibacterial activity against Staphylococcus aureus subsp. aureus in vitro. Based on the obtained results, the nanofiber membranes composed of polyvinyl alcohol/ alginate/ tamanu oil, with or without silver nanoparticles, have shown potential as wound dressings in the wound care discipline.
Asunto(s)
Nanopartículas del Metal , Plata , Staphylococcus , Ratas , Animales , Humanos , Plata/farmacología , Plata/química , Alcohol Polivinílico , Alginatos/farmacología , Alginatos/química , Nanopartículas del Metal/uso terapéutico , Nanopartículas del Metal/química , Ratas Wistar , Antibacterianos/farmacología , Antibacterianos/química , VendajesRESUMEN
This article presents a collection of data on approximately 150 copper-based alloys. The data compilation is based on articles published since 1993 and consists of about 1830 records. Each record contains a unique set of descriptors, such as composition and processing route, and targets, including properties such as hardness, yield strength, ultimate tensile strength, and electrical conductivity. The dataset includes information on the composition in mass percent of 20 alloying elements, and hundreds of temperature-time thermal treatments and thermomechanical conditions. The database is continually updated and hosted on an open data repository. Some of the data are presented graphically in the article to aid interpretation. This study intends to promote the identification of more sustainable alternatives to Cu-Be alloys, which is particularly relevant in developing non-toxic and environmentally-friendly alloys.
RESUMEN
Quantitative analysis via bibliometric field analyses is a recent, gradually emerging method. We conducted a bibliometric study to investigate the authors' scientific influence and contributions and evaluate trends and research foci in good death-related literature using the Web of Science (WOS) Core Collection. A total of 1,157 publications were selected for the analysis. There was a significant increase in annual publications per year (R2 = 0.79). The publication (317, 27.4%) and average citation (29.2) numbers were highest in the USA. Controlling for population number and GDP, the Netherlands had the highest number of articles per million persons (5.89) and US$ 1010 GDP (1.02). North American and Western European countries are leaders in the field, but some East Asian countries (Japan and Taiwan) perform well. Current research focuses on patient perspectives of good death and advance care planning among patients, families, and health care providers.
RESUMEN
Understanding the local chemical ordering propensity in random solid solutions, and tailoring its strength, can guide the design and discovery of complex, paradigm-shifting multicomponent alloys. First, we present a simple thermodynamic framework, based solely on binary enthalpies of mixing, to select optimal alloying elements to control the nature and extent of chemical ordering in high-entropy alloys (HEAs). Next, we couple high-resolution electron microscopy, atom probe tomography, hybrid Monte-Carlo, special quasirandom structures, and density functional theory calculations to demonstrate how controlled additions of Al and Ti and subsequent annealing drive chemical ordering in nearly random equiatomic face-centered cubic CoFeNi solid solution. We establish that short-range ordered domains, the precursors of long-range ordered precipitates, inform mechanical properties. Specifically, a progressively increasing local order boosts the tensile yield strengths of the parent CoFeNi alloy by a factor of four while also substantially improving ductility, which breaks the so-called strength-ductility paradox. Finally, we validate the generality of our approach by predicting and demonstrating that controlled additions of Al, which has large negative enthalpies of mixing with the constituent elements of another nearly random body-centered cubic refractory NbTaTi HEA, also introduces chemical ordering and enhances mechanical properties.
RESUMEN
Ideal artificial tissue scaffolds should provide an in vitro microenvironment comparable to native human skin tissue to direct cell functions, regulate tissue homeostasis, and promote tissue regeneration. A sandwich-like composite scaffold consisting of a hydrogel layer and two aligned nanofibre layers was fabricated and applied as a wound-healing dressing. Gentamicin was preloaded into the hydrogel middle layer and naturally released for antibacterial activity during the healing period. Nanofibrous layers embedded on the top and bottom surfaces of the hydrogel improved the tensile strength fivefold (1560 âkPa and 465% strain) while serving as a diffusion barrier to reduce the gentamicin initial burst release (30%-15%). Inspired by the extracellular matrix (ECM), the surface of nanofibre top layer was patterned with triangular microarrays using micro-moulding approach to reflect the multidimensional structure of ECM. Biocompatibility of the scaffold is proven from cytotoxicity and haemolysis studies. Fibroblast cells revealed a highly elongated and consistent alignment modulated by the micropatterned fibrous layer and directed their migration towards the wound area. Excisional wounds treated with the scaffold promoted 97.49% wound closure with low inflammation and rapid re-epithelialization and angiogenesis. This scaffold, with its tailored functionality capable of accelerating wound healing, has high potential in tissue engineering applications.
RESUMEN
Plant chloroplast RNA splicing and ribosome maturation (CRM)-domain-containing proteins are capable of binding RNA to facilitate the splicing of group I or II introns in chloroplasts, but their functions in mitochondria are less clear. In the present study, Arabidopsis thaliana CFM6, a protein with a single CRM domain, was expressed in most plant tissues, particularly in flower tissues, and restricted to mitochondria. Mutation of CFM6 causes severe growth defects, including stunted growth, curled leaves, delayed embryogenesis and pollen development. CFM6 functions specifically in the splicing of group II intron 4 of nad5, which encodes a subunit of mitochondrial complex I, as evidenced by the loss of nad5 intron 4 splicing and high accumulation of its pretranscripts in cfm6 mutants. The phenotypic and splicing defects of cfm6 were rescued in transgenic plants overexpressing 35S::CFM6-YFP. Splicing failure in cfm6 also led to the loss of complex I activity and to its improper assembly. Moreover, dysfunction of complex I induced the expression of proteins or genes involved in alternative respiratory pathways in cfm6. Collectively, CFM6, a previously uncharacterized CRM domain-containing protein, is specifically involved in the cis-splicing of nad5 intron 4 and plays a pivotal role in mitochondrial complex I biogenesis and normal plant growth.
Asunto(s)
Proteínas de Arabidopsis , Arabidopsis , Arabidopsis/genética , Arabidopsis/metabolismo , Proteínas de Arabidopsis/genética , Proteínas de Arabidopsis/metabolismo , Cloroplastos/metabolismo , Intrones/genética , Mitocondrias/genética , Mitocondrias/metabolismo , Empalme del ARN/genéticaRESUMEN
The topographic surface conditions of scaffolds can regulate cellular behaviours, such as by stimulating cellular migration and morphological changes to wound sites and have the potential to promote tissue regeneration. In this research, four types of engineered topographic surfaces, including arrays of hemisphere, pyramid, semi-cylinder, and triangle prism microstructures, were patterned on silicon moulds using microfabrication processes. The microstructural patterns were transferred onto the surface of polycaprolactone membranes and nanofibrous scaffolds by combining with the moulding approach and electrospinning technique, respectively. In vitro experimental results demonstrated that the triangular microstructural nanofibre provided a strong guiding performance to the filopodia of cultured C2C12 myoblast cells, thus inducing cellular elongation and alignment in the longitudinal direction and forming an elongated cell morphology. The cultured cells rapidly transitioned into an elongated morphology at an aspect ratio of 17.33 after 24 h of incubation, with 70% of the cell elongates aligning with the direction of triangular microstructural patterns. The cells cultured on the triangular microstructural nanofibre elongated four-fold compared with those in the flat nanofibre scaffold. Moreover, an in vivo study showed that wounds treated with the triangular microstructural nanofibre scaffold achieved 95.04% wound closure after 14 days and completed the reepithelialisation with an ordered collagen arrangement. Therefore, we believe that the engineered triangular nanofibrous scaffold may accelerate tissue regeneration and has potential for wound healing applications.
Asunto(s)
Nanofibras , Células Cultivadas , Colágeno , Poliésteres , Ingeniería de Tejidos , Andamios del Tejido , Cicatrización de HeridasRESUMEN
This paper describes the fabrication of a structural scaffold consisting of both randomly oriented nanofibers and triangular prism patterns on the scaffold surface using a combination technique of electrospinning and collector templates. The polycaprolactone (PCL) nanofibers were electrospun over a triangular prism pattern mold, which acted as a template. The deposited scaffold was removed from the template to produce a standalone structural scaffold of three-dimensional micropatterned nanofibers. The fabricated structural scaffold was compared with flat randomly oriented nanofibers based on in vitro and in vivo studies. The in vitro study indicated that the structural scaffold demonstrated higher fibroblast cell proliferation, cell elongation with a 13.48 ± 2.73 aspect ratio and 70% fibroblast cell orientation compared with flat random nanofibers. Among the treatment groups, the structural scaffold escalated the wound closure to 92.17% on day 14. Histological staining of the healed wound area demonstrated that the structural scaffold exhibited advanced epithelization of the epidermal layer accompanied by mild inflammation. The proliferated fibroblast cells and collagen fibers in the structural scaffold appeared denser and arranged more horizontally. These results determined the potential of micropatterned scaffolds for stimulating cell behavior and their application for wound healing.
RESUMEN
The Laetiporus sp. is a fungal species that is traditionally used for medicinal purposes. This study investigated the effects of the Laetiporus sulphureus fermented product (FL) as a feed supplementation on the antioxidant activities, the intestinal Tight Junction (TJ) mRNA expression, and the intestinal morphology of broiler chickens. Four-hundred one-day-old male broilers (Ross 308) were randomly allocated to five experimental diets: (1) a corn-soybean meal basal diet (control), (2) a basal diet replaced with 5% Wheat Bran (5% WB), (3) a basal diet replaced with 10% WB (10% WB), (4) a basal diet replaced with 5% FL (5% FL), and (5) a basal diet replaced with 10% FL (10% FL). The FL-supplemented groups exhibited a better feed conversion ratio in the overall experimental period compared to the WB and control groups. The serum antioxidant profiles of 35-day-old broilers showed that, compared to the control and 10% WB groups, the 5% FL supplementation group had a significantly increased superoxide dismutase activity, while it down-regulated the concentration of malondialdehyde in the serum (p < 0.05). The assessment of selected antioxidant gene expression showed that the 5% FL group significantly elevated heme oxygenase-1 and nuclear factor erythroid 2-related factor 2 expression, compared to the control and WB groups (p < 0.05). Furthermore, both of the FL supplemented groups had a significantly higher expression of glutathione peroxidase and catalase, compared to that of the WB and control groups in the jejunum (p < 0.05). The TJ mRNA expression in the jejunum showed that 5% FL significantly elevated the zonula occludens-1, claudin-1, and mucin-2 expression (p < 0.05), while 5% and 10% FL supplementation significantly improved OCLN expression in both the jejunum and ileum, compared to control group (p < 0.05). The intestinal morphology of 35-day-old broilers showed that a 5% FL supplementation significantly increased the villus height in the ileum and jejunum, compared to the WB and control groups (p < 0.05). Moreover, the 5% and 10% FL supplementation groups had a significantly higher villi:crypt ratio in the ileum, compared to the WB and control groups (p < 0.05). To conclude, FL supplementation improved the antioxidative status, the TJ mRNA expression, and the intestinal morphology, and it was accompanied by a lowered feed conversion ratio in broilers. Finally, 5% supplementation had the overall best results in improving the antioxidant status, TJ mRNA expression, and intestinal morphology of broilers.
RESUMEN
OBJECTIVE: Wheat bran (WB) was co-fermented with Aspergillus oryzae and phytase (Phy) to determine whether co-fermentation improve WB phosphorus and fiber utilization in Isa-brown layers. METHODS: A total of 112 Isa brown layer were randomly divided into 7 treatments with 8 replicates per a treatment and 2 hens per a replicate. The treatments included basal diet (control), basal diet supplemented with 250 unit/kg Phy (control+Phy), diet with 10% WB (10% WB), diet with 5% WB and 250 unit/kg Phy (5% WB+Phy) diet with 10% WB and 250 unit/kg Phy (10% WB+Phy), diet with 5% fermented WB supplemented with molasses and phy (PCFWH) and 125 unit/kg Phy (5% PCFWH), and diet with 10% PCFWH (10% PCFWH). The intestinal microbial population, intestinal morphology, serum antioxidant enzyme activities, and excreta phosphorus content were assessed. RESULTS: In PCFWH, spore counts, protease activity, xylanase activity, and ferulic acid were 8.50 log/g dry matter (DM), 190 unit/g DM, 120 unit/g DM, and 127 µg/g, respectively. Xylobiose and xylotriose were released in PCFWH, while they were not detectable in WB. Antioxidant capacity was also enhanced in PCFWH compared to WB. The 10% WB+Phy and 10% PCFWH groups produced higher egg mass, but hens fed 5% WB+Phy had the lowest amount of feed intake. Eggs from 10% PCFWH had better eggshell weight, eggshell strength, and eggshell thickness. Birds fed with 10% PCFWH also had higher serum superoxide dismutase and catalase activities. Compare to control, 10% PCFWH significantly reduced excreta phosphorus content. CONCLUSION: Diet inclusion of 10% PCFWH improved egg quality, antioxidant status, and excreta phosphorus content of laying hens.
RESUMEN
This study evaluated the antioxidant capacity of Ricinus communis L. (RC) leaves and powder when used as a feed additive for laying hens. Results showed that the total phenolic content of the aqueous leaf extract of Ricinus communis L. (RCE) was 48.39 mg gallic acid equivalent (GAE) per gram dry weight (DW). The flavonoid content was 9.76 mg quercetin dihydrate equivalent (QE)/g DW. Ferrous chelating activity was approximately 56.2% with an RCE concentration of 1 mg/mL; the highest chelating activity was 91.2% with 4 mg/mL extract. The reducing power of 1 mg/mL RC was 1.17 times better than 1 mg/mL butylated hydroxytoluene (BHT). The Trolox equivalent antioxidant capacity (TEAC) value of 12.5 mg/mL RCE was equivalent to 3.09 mg/mL Trolox. RCE (10 mg/mL) had a lipid oxidative inhibition capacity of 35.3%. A total of 80 ISA brown laying hens at twenty-nine weeks of age were randomly allocated into the control or 1 of 3 treatment groups; the latter received 0.5%, 1% or 2% of RC, respectively, for 12 weeks. Results showed that the RC supplementation improved the feed conversion rate and 0.5% RC generated the best results. Additionally, the egg yolk score was significantly increased in all RC-supplemented groups. Moreover, there was no significant difference in serum characteristics between the treatment groups. Serum antioxidant enzyme activity showed that superoxide dismutase (SOD) activity increased in the RC-supplemented groups relative to the control but was not significantly different. mRNA expression levels of the antioxidant regulatory genes GCLC, GST, HO-1, SOD1, and SOD2 were significantly increased with 2% RC supplementation. In summary, RC is a suitable feed additive for laying hens and the addition of 0.5% RC leaf powder resulted in the greatest benefits.
RESUMEN
This study investigated the effects of a Laetiporus sulphureus-fermented wheat bran (LS) supplementation on the microbiota and digesta characteristics of broiler chickens. Two hundred and forty male broilers (Ross 308) were randomly allocated into three groups fed with a corn-soybean-based diet (control), and the control diet being replaced with 5% wheat bran (WB) and 5% LS, respectively. Each group had four replicates and 20 birds per pen. Metagenomics analysis results of the ileum microbiota showed that, at the family level, the 5% LS groups had over 40% higher Lactobacillaceae compared to the control group in a mean difference comparison. Heat maps showed that, at the phylum level, the population of Firmicutes was higher and Proteobacteria was lower in the ileum of 5% LS compared to the control group. Results of the stack column plots of the top ten OTUs at the family level showed that a 5% LS and 5% WB supplementation altered the broiler microbiota distribution by increasing the relative abundance of Lactobacillaceae. Cecal microbiota analysis showed that the 5% LS-supplemented group had approximately 5% and 3% higher Veillonellaceae and Lactobacillaceae, respectively. Stack column plots of the top ten OTUs indicated that the distribution of cecal bacteria in each group was not markedly different. Both the ileum and cecum digesta in the 5% LS supplementation group had a slight and not significant elevation on the total VFA, while the pH values and ammonia nitrogen were significantly lowered compared to the control and 5% WB groups (p < 0.05). In addition, the 5% LS supplementation group had a significantly higher lactic acid concentration in both the ileum and cecum compared to the control and 5% WB groups (p < 0.05). In conclusion, a 5% LS supplementation could potentially enhance the feed conversion ratio and European Broiler Index (EBI) of broilers by elevating the family Lactobacillaceae and suppressing the phylum Proteobacteria's population, thus creating changed intestinal environments that may potentially favor the growth and health of the broilers.
RESUMEN
A thermally activated shape memory polymer based on the mixture of polycaprolactone (PCL) and polydimethylsiloxane (PDMS) was fabricated into the nanofibre mesh using the electrospinning process. The added percentages of the PDMS segment in the PCL-based polymer influenced the mechanical properties. Polycaprolactone serves as a switching segment to adjust the melting temperature of the shape memory electro-spun PCL-PDMS scaffolds to our body temperature at around 37 °C. Three electro-spun PCL-PDMS copolymer nanofibre samples, including PCL6-PDMS4, PCL7-PDMS3 and PCL8-PDMS2, were characterised to study the thermal and mechanical properties along with the shape memory responses. The results from the experiment showed that the PCL switching segment ratio determines the crystallinity of the copolymer nanofibres, where a higher PCL ratio results in a higher degree of crystallinity. In contrast, the results showed that the mechanical properties of the copolymer samples decreased with the PCL composition ratio. After five thermomechanical cycles, the fabricated copolymer nanofibres exhibited excellent shape memory properties with 98% shape fixity and above 100% recovery ratio. Moreover, biological experiments were applied to evaluate the biocompatibility of the fabricated PCL-PDMS nanofibre mesh. Owing to the thermally activated shape memory performance, the electro-spun PCL-PDMS fibrous mesh has a high potential for biomedical applications such as medical shrinkable tubing and wire.
RESUMEN
Pennisetum purpureum Schum No. 2 waste mushroom compost (PWMC) is the main byproduct when cultivating Pleurotus eryngii. Due to the high mycelium levels in PWMC, it may have potential as a feed supplement for broilers. This study investigated the effects of PWMC supplementation on antioxidant capacity and adipose metabolism in broilers. In the study, 240 broilers were randomly allocated to one of four treatment groups: basal diet (control), 0.5%, 1%, or 2% PWMC supplementation. Each treatment group had 60 broilers, divided into three replicates. The results showed that supplementation with 0.5% PWMC decreased the feed conversion rate (FCR) from 1.36 to 1.28, compared to the control. Supplementation with 0.5% or 2% PWMC decreased glucose and triglyceride levels, compared to the control (p < 0.0001), the concentrations of adiponectin and oxytocin increased from 5948 to 5709, 11820, and 7938 ng/ mL; and 259 to 447, 873, and 963 pg/ mL, respectively. Toll-like receptor 4 was slightly increased in the 0.5% and 1% PWMC groups. Both interferon-γ (IFN-γ) and interleukin-1ß (IL-1ß) were significantly decreased, by about three to five times for IFN-γ (p < 0.0001) and 1.1 to 1.6 times for IL-1ß (p = 0.0002). All antioxidant-related mRNA, including nuclear factor erythroid 2-related factor 2 (Nrf-2) and superoxidase dismutase-1 (SOD-1), increased significantly following PWMC supplementation. Both claudin-1 and zonula occludens 1 increased, especially in the 2% PWMC group. Excitatory amino acid transporter 3 (EAAT3) significantly increased by about 5, 12, and 11 times in the 0.5%, 1%, and 2% PWMC groups. All adipolysis-related mRNA were induced in the PWMC treatment groups, further enhancing adipolysis. Overall, 0.5% PWMC supplementation was recommended due to its improving FCR, similar antioxidant capacity, and upregulated adipolysis.
RESUMEN
OBJECTIVE: The purpose of this study was to investigate whether goose growth and feather characteristics are influenced by their line and feeding surroundings, inclusive of floor materials and types, since there are no reports regarding these factors. METHODS: The 240 White Roman geese which were hatched and sex identified came from 3 commercial goose farms. They were randomly distributed to 24 pens depending on a completely random design. The study continued for 13 weeks and included 3 lines of commercial geese and 2 floor types (cement strip floor [CSF] or cement floor [CF]). RESULTS: The day one gosling weight from A farm was lower than other two farms (96 g vs 107 and 115 g; p<0.001). Afterwards, the body weight, back length, keel length, chest girth and main wing feather length among 3 farms showed no significance difference prior to 12 weeks. The CF group showed heavier body weight, shorter back length, longer keel length, shorter chest girth and shorter main wing feather length than the CSF group prior to 12 weeks. The down weight in the CF was heavier than the CSF group (57.1 g vs 41.8 g; p<0.01) prior to 13 weeks. CONCLUSION: The body weight showed the positive relations for dry feather weight (r = 0.59), down weight (r = 0.69), percent of the down weight of live body weight prior to 13 weeks (r = 0.61).
RESUMEN
Saccharomyces cerevisiae and Aspergillus oryzae are both ancient probiotic species traditionally used as microbes for brewing beer and soy sauce, respectively. This study investigated the effect of adding these two probiotics with phytase fermentation products to the broilers diet. Fermented products possess protease and cellulase, and the activities were 777.1 and 189.5 U/g dry matter (DM) on S. cerevisiae fermented products (SCFP) and 190 and 213.4 U/g DM on A. oryzae fermented products (AOFP), respectively. Liposaccharides stimulated PBMCs to produce nitric oxide to 120 µmol. Both SCFP and AOFP reduced lipopolysaccharides stimulated peripheral blood mononuclear cells (PBMCs) nitric oxide release to 40 and 60 µmol, respectively. Nevertheless, in an MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, SCFP and AOFP also increased the survival rate of lipopolysaccharides stimulated PBMCs by almost two-fold compared to the negative control. A total of 240 broilers were divided into four groups as Control, SCFP 0.1% (SCFP), SCFP 0.05% + AOFP 0.05% (SAFP), and AOFP 0.1% (AOFP) groups, respectively. Each group had 20 broilers, and three replicate pens. The results showed that the addition of SCFP, SAFP, and AOFP groups did not affect the growth performances, but increased the jejunum value of villus height and villus: crypt ratio on SAFP and AOFP groups compared to the control and SCFP groups. Furthermore, adding SCFP, SAFP, and AOFP significantly reduced the number of Clostridium perfringens in ileum chyme. SCFP, SAFP, and AOFP significantly reduced the amount of interleukin-1ß, inducible nitric oxide synthases, interferon-γ, and nuclear factor kappa B mRNA expression in PBMCs, especially in the AOFP group. In summary, all the SCFP, SAFP, and AOFP groups can be suggested as a functional feed additive since they enhanced villus: crypt ratio and decreased inflammation-related mRNA expression, especially for AOFP group in broilers.
RESUMEN
Gold nanorods (GNRs) with exceptional photothermal properties have held promising potential for application in the biomedical field. In this study, the authors achieved photothermal ablation by polyethylene glycol (PEG)-functionalised GNRs. Well-dispersed and uniform GNRs were produced through a seed-mediated growth method. A thermal camera was used to scrutinise the temperature distribution and efficiency of the photothermal properties of the GNRs, which were irradiated by an 808â nm laser on a silicon chip. They observed that the GNRs provided about a 5°C temperature increase and produced hyperthermia efficiently. Since GNRs need to be surface tailored with a biocompatible material rather than cetyltrimethylammonium bromide (CTAB), they chose methoxyl PEG thiol to modify the GNRs. By taking advantage of the alkaline environment that assists this functionalisation, they accomplished about 89% removal of CTAB and identified a PEG layer on the surface of the GNRs. The GNR biocompatibility was considerably improved without any shift of the optical properties. Hepatocellular carcinoma cells were incubated with GNRs for 24â h and then were irradiated with a near-infrared laser for 3â min. Few cells remained alive, which demonstrated the photothermal ablation ability of the GNRs.