RESUMEN
The conversion of carbon dioxide (CO2) into value-added chemicals with two or more carbons (C2+) is a promising strategy that cannot only mitigate anthropogenic CO2 emissions but also reduce the excessive dependence on fossil feedstocks. In recent years, atomically dispersed metal catalysts (ADCs), including single-atom catalysts (SACs), dual-atom catalysts (DACs), and single-cluster catalysts (SCCs), emerged as attractive candidates for CO2 fixation reactions due to their unique properties, such as the maximum utilization of active sites, tunable electronic structure, the efficient elucidation of catalytic mechanism, etc. This review provides an overview of significant progress in the synthesis and characterization of ADCs utilized in photocatalytic, electrocatalytic, and thermocatalytic conversion of CO2 toward high-value C2+ compounds. To provide insights for designing efficient ADCs toward the C2+ chemical synthesis originating from CO2, the key factors that influence the catalytic activity and selectivity are highlighted. Finally, the relevant challenges and opportunities are discussed to inspire new ideas for the generation of CO2-based C2+ products over ADCs.
RESUMEN
Developing catalysts with high catalytic activity and stability in acidic media is crucial for advancing hydrogen production in proton exchange membrane water electrolyzers (PEMWEs). To this end, a self-supported WO3@RuO2 nanowire structure was grown in situ on a titanium mesh using hydrothermal and ion-exchange methods. Despite a Ru loading of only 0.098 wt %, it achieves an overpotential of 246 mV for the oxygen evolution reaction (OER) at a current density of 10 mA·cm-2 in acidic 0.5 M H2SO4 while maintaining excellent stability over 50 h, much better than that of the commercial RuO2. After the establishment of the WO3@RuO2 heterostructure, a reduced overpotential of the rate-determining step from M-O* to M-OOH* is confirmed by the DFT calculation. Meanwhile, its enhanced OER kinetics are also greatly improved by this self-supported system in the absence of the organic binder, leading to a reduced interface resistance between active sites and electrolytes. This work presents a promising approach to minimize the use of noble metals for large-scale PEMWE applications.
RESUMEN
The utilization of renewable energy for hydrogen production presents a promising pathway towards achieving carbon neutrality in energy consumption. Water electrolysis, utilizing pure water, has proven to be a robust technology for clean hydrogen production. Recently, seawater electrolysis has emerged as an attractive alternative due to the limitations of deep-sea regions imposed by the transmission capacity of long-distance undersea cables. However, seawater electrolysis faces several challenges, including the slow kinetics of the oxygen evolution reaction (OER), the competing chlorine evolution reaction (CER) processes, electrode degradation caused by chloride ions, and the formation of precipitates on the cathode. The electrode and catalyst materials are corroded by the Cl- under long-term operations. Numerous efforts have been made to address these issues arising from impurities in the seawater. This review focuses on recent progress in developing high-performance electrodes and electrolyser designs for efficient seawater electrolysis. Its aim is to provide a systematic and insightful introduction and discussion on seawater electrolysers and electrodes with the hope of promoting the utilization of offshore renewable energy sources through seawater electrolysis.
RESUMEN
Despite considerable interest in medical and pharmaceutical fields, there remains a notable absence of functional textiles that concurrently exhibit antibacterial and antioxidant properties. Herein, a new composite fabric constructed using nanostructured bacterial cellulose (BC) covalently-linked with cerium oxide nanoparticles (BC@CeO2NPs) is introduced. The synthesis of CeO2NPs on the BC is performed via a microwave-assisted, in situ chemical deposition technique, resulting in the formation of mixed valence Ce3+/Ce4+ CeO2NPs. This approach ensures the durability of the composite fabric subjected to multiple washing cycles. The Reactive oxygen species (ROS) scavenging activity of CeO2NPs and their rapid and efficient eradication of >99% model microbes, such as Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus remain unaltered in the composite. To demonstrate the feasibility of incorporating the fabric in marketable products, antimicrobial face masks are fabricated with filter layers made of BC@CeO2NPs cross-linked with propylene or cotton fibers. These masks exhibit complete inhibition of bacterial growth in the three bacterial strains, improved breathability compared to respirator masks and enhanced filtration efficiency compared to single-use surgical face masks. This study provides valuable insights into the development of functional BC@CeO2NPs biotextiles in which design can be extended to the fabrication of medical dressings and cosmetic products with combined antibiotic, antioxidant and anti-inflammatory activities.
Asunto(s)
Antibacterianos , Antioxidantes , Celulosa , Cerio , Escherichia coli , Pseudomonas aeruginosa , Staphylococcus aureus , Celulosa/química , Cerio/química , Cerio/farmacología , Antibacterianos/farmacología , Antibacterianos/química , Antioxidantes/química , Antioxidantes/farmacología , Escherichia coli/efectos de los fármacos , Staphylococcus aureus/efectos de los fármacos , Pseudomonas aeruginosa/efectos de los fármacos , Máscaras , Textiles , Humanos , Especies Reactivas de Oxígeno/metabolismo , Nanopartículas/química , Pruebas de Sensibilidad MicrobianaRESUMEN
There is a growing demand for high purity ethanol as an electronic chemical. The conventional distillation process is effective for separating ethanol from water but consumes a significant amount of energy. Selective membrane separation using the LTA-type molecular sieve has been introduced as an alternative. The density functional theory simulation indicates that aluminum (Al) sites are evenly distributed throughout the framework, while sodium (Na+) ions are preferentially located in the six-membered ring. The movement of ethanol molecules can cause Na+ ions to be transported towards the eight-membered ring, hindering the passage of ethanol through the channel. In contrast, the energy barrier for water molecules passing through the channel occupied by Na+ ions is significantly lower, leading to a high level of selectivity for ethanol-water separation.
RESUMEN
Background: The intricate interplay between human well-being and the surrounding environment underscores contemporary discourse. Within this paradigm, comprehensive environmental monitoring holds the key to unraveling the intricate connections linking population health to environmental exposures. The advent of satellite remote sensing monitoring (SRSM) has revolutionized traditional monitoring constraints, particularly limited spatial coverage and resolution. This innovation finds profound utility in quantifying land covers and air pollution data, casting new light on epidemiological and geographical investigations. This dynamic application reveals the intricate web connecting public health, environmental pollution, and the built environment. Objective: This comprehensive review navigates the evolving trajectory of SRSM technology, casting light on its role in addressing environmental and geographic health issues. The discussion hones in on how SRSM has recently magnified our understanding of the relationship between air pollutant exposure and population health. Additionally, this discourse delves into public health challenges stemming from shifts in urban morphology. Methods: Utilizing the strategic keywords "SRSM," "air pollutant health risk," and "built environment," an exhaustive search unfolded across prestigious databases including the China National Knowledge Network (CNKI), PubMed and Web of Science. The Citespace tool further unveiled interconnections among resultant articles and research trends. Results: Synthesizing insights from a myriad of articles spanning 1988 to 2023, our findings unveil how SRMS bridges gaps in ground-based monitoring through continuous spatial observations, empowering global air quality surveillance. High-resolution SRSM advances data precision, capturing multiple built environment impact factors. Its application to epidemiological health exposure holds promise as a pioneering tool for contemporary health research. Conclusion: This review underscores SRSM's pivotal role in enriching geographic health studies, particularly in atmospheric pollution domains. The study illuminates how SRSM overcomes spatial resolution and data loss hurdles, enriching environmental monitoring tools and datasets. The path forward envisions the integration of cutting-edge remote sensing technologies, novel explorations of urban-public health associations, and an enriched assessment of built environment characteristics on public well-being.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Humanos , Tecnología de Sensores Remotos , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Exposición a Riesgos Ambientales , Entorno ConstruidoRESUMEN
Currently, the process of an acidic oxygen evolution reaction (OER) necessitates the use of Iridium dioxygen (IrO2), which is both expensive and incredibly scarce on Earth. Ruthenium dioxygen (RuO2) offers high activity for acidic OERs and presents a potential substitution for IrO2. Nevertheless, its practical application is hindered by its relatively poor stability. In this study, we have developed Mn-doped RuO2 (Mn-RuO2) nanoarrays that are anchored on a titanium (Ti) mesh utilizing a two-step methodology involving the preparation of MnO2 nanoarrays followed by a subsequent Ru exchange and annealing process. By precisely optimizing the annealing temperature, we have managed to attain a remarkably low overpotential of 217 mV at 10 mA cm-2 in a 0.5 M H2SO4 solution. The enhanced catalytic activity of our Mn-RuO2 nanoarrays can be attributed to the electronic modification brought about by the high exposure of active sites, Mn dopant, efficient mass transfer, as well as the efficient transfer of electrons between the Ti mesh and the catalyst arrays. Furthermore, these self-supported Mn-RuO2 nanoarrays demonstrated excellent long-term stability throughout a chronoamperometry test lasting for 100 h, with no discernible changes observed in the Ru chemical states.
RESUMEN
Water electrolysis is currently a major technique to produce clean hydrogen, which is regarded as a promising and sustainable energy carrier. The efficiency of water electrolysis is highly dependent on the oxygen evolution reaction (OER) on the anode. The evaluation of an OER electrocatalyst is frequently carried out on a three-electrode system in a container of electrolyte. Herein, we found that the electrode positions in the electrolyte container could significantly affect the data acquisition of OER performance. After a detailed investigation, we reveal that the difference of the OER activity of an electrocatalyst at a different position is originated from their different iRu drop and the gas diffusion resistance. For the first time, this work evokes concerns on the accurate evaluation of electrocatalysts regarding the electrode position. For fair comparisons and reliable results, it is strongly suggested to keep the electrode position unchanged in the electrochemical measurements. In addition, the establishment of a standard electrolyzer setup for electrocatalysis evaluation in the electrochemical community is also called for.
RESUMEN
Advanced oxidation processes using TiO2-based nanomaterials are sustainable technologies that hold great promise for the degradation of many types of pollutants including pharmaceutical residues. A wide variety of heterostructures coupling TiO2 with visible-light active nanomaterials have been explored to shift its photocatalytic properties to harness sun irradiation but a systematic comparison between them is lacking in the current literature. Furthermore, the high number of proposed nanostructures with different size, morphology, and surface area, and the often complex synthesis processes hamper the transition of these materials into commercial and effective solutions for environmental remediation. Herein, we have designed a facile and cost-effective method to synthesize two heterostructured photocatalysts representative of two main families of novel structures proposed, hybrids of TiO2 with metal (Au) and semiconductor (CeO2) nanomaterials. The photocatalysts have been extensively characterized to ensure a good comparability in terms of co-catalyst doping characteristics, morphology and surface area. The photocatalytic degradation of ciprofloxacin and sulfamethoxazole as target pollutants, two antibiotics of high concern polluting water sources, has been evaluated and CeO2/TiO2 exhibited the highest activity, achieving complete antibiotic degradation at very low photocatalyst concentrations. Our study provides new insights into the development of inexpensive heterostructured photocatalysts and suggests that the non-stoichiometry and characteristic d and f electronic orbital configuration of CeO2 have a significantly improved role in the enhancement of the photocatalytic reaction.
RESUMEN
Water electrolysis is a compelling method for the production of environmentally friendly hydrogen, minimizing carbon emissions. The electrolysis of water heavily relies on an effective and steady oxygen evolution reaction (OER) taking place at the anode. Herein, we introduce a highly promising catalyst for OER called CoSe2@NiFeOOH arrays, which are supported on nickel foam. This catalyst, referred to as CoSe2@NiFeOOH/NF, is fabricated through a two-step process involving the selenidation of a Co-based porous metal organic framework and subsequent electrochemical deposition on nickel foam. The CoSe2@NiFeOOH/NF catalyst demonstrates outstanding activity for the OER in an alkaline electrolyte. It exhibits a low overpotential (η) of 254 mV at 100 mA cm-2, a small Tafel slope of 73 mV dec-1, and excellent high stability. The good performance of CoSe2@NiFeOOH/NF can be attributed to the combination of the high conductivity of the inner layer and the synergistic effect between CoSe2 and NiFeOOH. This study offers an effective method for the fabrication of highly efficient catalysts for an OER.
RESUMEN
Cerium oxide nanozymes (CeO2NZs) are attracting vast attention due to their antioxidant and catalytic properties and mimic the activities of multiple endogenous enzymes. However, as is the case for nanomedicines in general, the success in showing their unique medical applications has not been matched by an understanding of their pharmacokinetics, which is delaying their implementation in clinical settings. Furthermore, the data of their modifications in body fluids and the impact on their activity are scarce. Herein, two types of widely used CeO2NZs, electrostatically stabilized and coated with a mesoporous silica shell, were exposed to simulated saliva and lung, gastric and intestinal fluids, and cell culture media. Their physicochemical modifications and bioactivity were tracked over time up to 15 days combining the data of different characterization techniques and biological assays. The results show that the biocompatibility and antioxidant activity are retained in all cases despite the different evolution behaviors in different fluids, including agglomeration. This work provides an experimental basis from a pharmacokinetic perspective that supports the therapeutic effectiveness of CeO2NZs observed in vivo for the treatment of many conditions related to chronic inflammation and cancer, and suggests that they can be safely administered through different portals of entry including intravenous injection, oral ingestion or inhalation.
Asunto(s)
Líquidos Corporales , Saliva , Antioxidantes/farmacología , Bioensayo , CatálisisRESUMEN
The well-established proton exchange membrane (PEM)-based water electrolysis, which operates under acidic conditions, possesses many advantages compared to alkaline water electrolysis, such as compact design, higher voltage efficiency, and higher gas purity. However, PEM-based water electrolysis is hampered by the low efficiency, instability, and high cost of anodic electrocatalysts for the oxygen evolution reaction (OER). In this review, the recently reported acidic OER electrocatalysts are comprehensively summarized, classified, and discussed. The related fundamental studies on OER mechanisms and the relationship between activity and stability are particularly highlighted in order to provide an atomistic-level understanding for OER catalysis. A stability test protocol is suggested to evaluate the intrinsic activity degradation. Some current challenges and unresolved questions, such as the usage of carbon-based materials and the differences between the electrocatalyst performances in acidic electrolytes and PEM-based electrolyzers are also discussed. Finally, suggestions for the most promising electrocatalysts and a perspective for future research are outlined. This review presents a fresh impetus and guideline to the rational design and synthesis of high-performance acidic OER electrocatalysts for PEM-based water electrolysis.
RESUMEN
Acid mine drainage (AMD) is a well-recognized environmental issue associated with mining production worldwide. The second part of our study aims to assess the protective effect of using a polymer hard layer (PHL) by conducting sulphur-enriched tailing-based column experiments. An oxygen (O2) barrier was simulated using a designed column device filled with different types of tailings. All experimental columns underwent six drying-wetting cycles, and the chemical properties of the tailings and leachate were detected after every cycle. The permeability coefficient of the PHL was only 1.16 × 10- 5 cm/s. Over the entire experimental period, none of the leachates collected from column 4 using the PHL as an O2 barrier. Moreover, the level of redox potential and pH and the contents of heavy metals such as Cu and Zn were stable in PHL covering system. These results show that a PHL is the optimal covering system.
Asunto(s)
Metales Pesados , Polimerizacion , Minería , Oxidación-ReducciónRESUMEN
Highly active and stable oxygen evolution reaction (OER) electrocatalysts for water electrolysis are currently in high demand. Herein, a rationally designed three-dimensional (3D) CoFe selenide porous array (Fe-CoSe PA) is synthesized through ion exchange from zeolitic imidazolate framework-L (ZIF-L) nanoarray, followed by a facile selenization under hydrothermal conditions for OER electrocatalysis. During the OER process, the surface of Fe-CoSe PA is rapidly oxidized to CoFe oxides/hydroxides, which prevents the inner layer from being oxidized. Benefiting from the high porosity, abundant active sites, and the high conductivity of inner Fe-CoSe, Fe-CoSe PA exhibits excellent OER performance, with an overpotential of 285 mV at a current density of 10 mA cm-2, and a small Tafel slope of 68 mV dec-1, as well as high stability under 50 h of continuous testing. The present work could provide a facile route for fabricating 3D porous selenides for highly efficient OER catalysis.
RESUMEN
Tandem catalysis provides an economical and energy-efficient process for the production of fine chemicals. In this work, we demonstrate that a rationally synthesized carbon-based catalyst with atomically dispersed dual Fe-Al sites (ADD-Fe-Al) achieves superior catalytic activity for the one-pot oxidative carboxylation of olefins (conversion â¼97%, selectivity â¼91%), where the yield of target product over ADD-Fe-Al is at least 62% higher than that of monometallic counterparts. The kinetic results reveal that the excellent catalytic performance arises from the synergistic effect between Fe (oxidation site) and Al sites (cycloaddition site), where the efficient CO2 cycloaddition with epoxides in the presence of Al sites (3.91 wt %) positively shifts the oxidation equilibrium to olefin epoxidation over Fe sites (0.89 wt %). This work not only offers an advanced catalyst for oxidative carboxylation of olefins but also opens up an avenue for the rational design of multifunctional catalysts for tandem catalytic reactions in the future.
RESUMEN
The development of highly efficient non-precious metal electrocatalysts for the oxygen evolution reaction (OER) in low-grade or saline water is currently of great importance for the large-scale production of hydrogen. In this study, by using an electrochemical activation pretreatment, metal oxy(hydroxide) nanosheet structures derived from self-supported nickel-iron phosphide and nitride nanoarrays grown on Ni foam are successfully fabricated for OER catalysis in saline water. It is demonstrated that the different NiOOH and NiOOH@FeOOH (NiOOH grown on FeOOH) structures are generated from nickel-iron nitride and phosphide, respectively, after electrochemical activation. In particular, the NiOOH@FeOOH heteroarchitecture shows outstanding electrocatalytic performance with an ultralow overpotential of 292 mV to drive the current density of 500 mA cm-2 . An unconventional dual-sites mechanism (UDSM) is proposed to address the OER process on NiOOH@FeOOH and show that the FeOOH underlayer plays a critical role regarding the enhanced OER activity of NiOOH. The new possible UDSM involving two reaction sites presents a different understanding of the OER process on multi-OH layer complexes, which is expected to guide the design of heteroarchitecture electrocatalysts.
RESUMEN
Defects in solid materials vitally determine their physicochemical properties; however, facile regulation of the defect density is still a challenge. Herein, we demonstrate that the ligand defect density of metal-organic frameworks (MOFs) with a UiO-66 structural prototype is precisely regulated by tuning the linker groups (X = OMe, Me, H, F). Detailed analyses reveal that the ligand defect concentration is positively correlated with the electronegativity of linker groups, and Ce-UiO-66-F, constructed by F-containing ligands and Ce-oxo nodes, possesses the superior ligand defect density (>25%) and identifiable irregular periodicity. The increase in ligand defect density results in the reduction of the valence state and the coordination number of Ce sites in Ce-UiO-66-X, and this merit further validates the relationship between the defective structure and catalytic performance of CO2 cycloaddition reaction. This facile, efficient, and reliable strategy may also be applicable to precisely constructing the defect density of porous materials in the future.
Asunto(s)
Estructuras Metalorgánicas , Compuestos Organometálicos , Ácidos Ftálicos , Ligandos , Estructuras Metalorgánicas/química , Compuestos Organometálicos/químicaRESUMEN
Acid mine drainage, produced from sulfur-containing mine waste exposed to air, water, and bacteria, is considered as a serious environmental pollutant because of its extremely low pH and excessive heavy metals. In order to solve the ecological environment problems caused by the acid mine drainage, treatment methods such as neutralization, adsorption, passivation, bio-inhibition, and physical coverage have been developed. Nevertheless, these methods are terminal treatment methods, which are unable to prevent the generation of acid mine drainage at the source. Recently, it is noteworthy that the tailing covering technology is particularly emphasized, owing to its superior source control capability. By reducing the contact with air, water, and bacteria, the oxidation of sulfide tailings is significantly reduced, thus avoiding the production of acid mine drainage. To date, massive research has been studied and parts of technologies have been applied, but the review on the principles, processes, and applications of these technologies are still lacking. Thus, the present review aims to increase the knowledge related to the most relevant application of tailing covering technology with the following aspects: (i) the background, concepts, and performance of tailing covering technology; (ii) the applicable conditions for each tailings coverage system and their advantages and limitations; and (iii) the future perspective of this technology.
RESUMEN
Defect engineering is a promising strategy for supported catalysts to improve the catalytic activity and durability. Here, we selected the carbon (C) matrix enriched with topological defects to serve as the substrate material, in which the topological defects can act as anchoring centers to trap Pt nanoparticles for driving the O2 reduction reactions (ORRs). Both experimental characterizations and theoretical simulations revealed the strong Pt-defect interaction with enhanced charge transfer on the interface. Despite a low Pt loading, the supported catalyst can still achieve a remarkable 55 mV positive shift of half-wave potential toward ORR in O2-saturated 0.1 M HClO4 electrolyte compared with the commercial Pt catalyst on graphitized C. Moreover, the degeneration after 5,000 voltage cycles was negligible. This finding indicates that the presence of strong interaction between Pt and topological C defects can not only stabilize Pt nanoparticles but also optimize the electronic structures of Pt/C catalysts toward ORR.
RESUMEN
A Zr-based metal-organic framework (MOF-801) with high thermal and chemical stability was prepared by the solvothermal synthesis method. Notably, MOF-801 exhibits a high separation selectivity for C3H8/CH4 and C2H6/CH4, making it a practical material for the storage and purification of light alkanes.