Phase separation drives the folding of recombinant collagen.

Recombinantly produced collagens present a sustainable, ethical, and safe substitute for collagens derived from natural sources. However, controlling the folding of the recombinant collagens, crucial for replicating the mechanical properties of natural materials, remains a formidable task. Collagen-like proteins from willow sawfly are relatively small and contain no hydroxyprolines, presenting an attractive alternative to the large and post-translationally modified mammalian collagens. Utilizing CD spectroscopy and analytical ultracentrifugation, we demonstrate that recombinant willow sawfly collagen assembles into collagen triple helices in a concentration-dependent manner. Interestingly, we observed that the lower concentration threshold for the folding can be overcome by freezing or adding crowding agents. Microscopy data show that both freezing and the addition of crowding agents induce phase separation. We propose that the increase in local protein concentration during phase separation drives the nucleation-step of collagen folding. Finally, we show that freezing also induces the folding of recombinant human collagen fragments and accelerates the folding of natural bovine collagen, indicating the potential to apply phase separation as a universal mechanism to control the folding of recombinant collagens. We anticipate that the results provide a method to induce the nucleation of collagen folding without any requirements for genetic engineering or crosslinking.

Recombinant silk protein condensates show widely different properties depending on the sample background.

There is an increasing understanding that condensation is a crucial intermediate step in the assembly of biological materials and for a multitude of cellular processes. To apply and to understand these mechanisms, in vitro biophysical characterisation techniques are central. The formation and biophysical properties of protein condensates depend on a multitude of factors, such as protein concentration, pH, temperature, salt concentration, and presence of other biomolecules as well as protein purification and storage conditions. Here we show how critical the procedures for preparing protein samples for in vitro studies are. We compare two purification methods of the recombinant spider silk protein CBM-AQ12-CBM and study the effect of background molecules, such as DNA, on the formation and properties of the condensates. We characterize the condensates using aggregation induced emitters (AIEs), coalescence studies, and micropipette aspiration. The condensated sample containing background molecules exhibit a lower threshold concentration for condensate formation accompanied by a lower surface tension and longer coalescence time when compared to the pure protein condensates. Furthermore, the partitioning of small AIEs is enhanced in the presence of background molecules. Our results highlight that the purification method and remaining background molecules strongly affect the biophysical properties of spider silk condensates. Using the acquired knowledge about spider silk protein purification we derive guidelines for reproducible condensate formation that will foster the use of spider silk proteins as adhesives or carriers for biomedical applications.

Controlling Drug Partitioning in Individual Protein Condensates through Laser-Induced Microscale Phase Transitions.

Gelation of protein condensates formed by liquid-liquid phase separation occurs in a wide range of biological contexts, from the assembly of biomaterials to the formation of fibrillar aggregates, and is therefore of interest for biomedical applications. Soluble-to-gel (sol-gel) transitions are controlled through macroscopic processes such as changes in temperature or buffer composition, resulting in bulk conversion of liquid droplets into microgels within minutes to hours. Using microscopy and mass spectrometry, we show that condensates of an engineered mini-spidroin (NT2repCTYF) undergo a spontaneous sol-gel transition resulting in the loss of exchange of proteins between the soluble and the condensed phase. This feature enables us to specifically trap a silk-domain-tagged target protein in the spidroin microgels. Surprisingly, laser pulses trigger near-instant gelation. By loading the condensates with fluorescent dyes or drugs, we can control the wavelength at which gelation is triggered. Fluorescence microscopy reveals that laser-induced gelation significantly further increases the partitioning of the fluorescent molecules into the condensates. In summary, our findings demonstrate direct control of phase transitions in individual condensates, opening new avenues for functional and structural characterization.

Effect of Phosphate on the Molecular Properties, Interactions, and Assembly of Engineered Spider Silk Proteins.

Phosphate plays a vital role in spider silk spinning and has been utilized in numerous artificial silk spinning attempts to replicate the remarkable mechanical properties of natural silk fiber. Its application in artificial processes has, however, yielded varying outcomes. It is thus necessary to investigate the origins and mechanisms behind these differences. By using recombinant silk protein SC-ADF3 derived from the garden spider Araneus diadematus, here, we describe its conformational changes under various conditions, elucidating the effect of phosphate on SC-ADF3 silk protein properties and interactions. Our results demonstrate that elevated phosphate levels induce the irreversible conformational conversion of SC-ADF3 from random coils to ß-sheet structures, leading to decreased protein solubility over time. Furthermore, exposure of SC-ADF3 to phosphate stiffens already formed structures and reduces the ability to form new interactions. Our findings offer insights into the underlying mechanism through which phosphate-induced ß-sheet structures in ADF3-related silk proteins impede fiber formation in the subsequent phases. From a broader perspective, our studies emphasize the significance of silk protein conformation for functional material formation, highlighting that the formation of ß-sheet structures at the initial stages of protein assembly will affect the outcome of material forming processes.

The ratio of fibroin to sericin in the middle silk gland of Bombyx mori and its correlation with the extensional behavior of the silk dope.

Understanding how native silk spinning occurs is crucial for designing artificial spinning systems. One often overlooked factor in Bombyx mori is the secretion of sericin proteins. Herein, we investigate the variation in amino acid content at different locations in the middle silk gland (MSG) of B. mori. This variation corresponds to an increase in sericin content when moving towards the anterior region of the MSG, while the posterior region predominantly contains fibroin. We estimate the mass ratio of sericin to fibroin to be ~25/75 wt% in the anterior MSG, depending on the fitting method. Then, we demonstrate that the improvement in the extensional behavior of the silk dope in the MSG correlates with the increase in sericin content. The addition of sericin may decrease the viscosity of the silk dope, a factor associated with an increase in the spinnability of silk. We further discuss whether this effect could also result from other known physicochemical changes within the MSG.

Exploration of Chemical Diversity in Intercellular Quorum Sensing Signalling Systems in Prokaryotes.

Quorum sensing (QS) serves as a vital means of intercellular signalling in a variety of prokaryotes, which enables single cells to act in multicellular configurations. The potential to control community-wide responses has also sparked numerous recent biotechnological innovations. However, our capacity to utilize intercellular communication is hindered due to a scarcity of complementary signalling systems and a restricted comprehension of interconnections between these systems caused by variations in their dynamic range. In this study, we utilize uniform manifold approximation and projection and extended-connectivity fingerprints to explore the available chemical space of QS signalling molecules. We investigate and experimentally characterize a set of closely related QS signalling ligands, consisting of N-acyl homoserine lactones and the aryl homoserine lactone p-coumaroyl, as well as a set of more widely diverging QS ligands, consisting of photopyrones, dialkylresorcinols, 3,5-dimethylpyrazin-2-ol and autoinducer-2, and define their performance. We report on a set of six signal- and promoter-orthogonal intercellular QS signalling systems, significantly expanding the toolkit for engineering community-wide behaviour. Furthermore, we demonstrate that ligand diversity can serve as a statistically significant tool to predict much more complicated ligand-receptor interactions. This approach highlights the potential of dimensionality reduction to explore chemical diversity in microbial dynamics.

Triblock Proteins with Weakly Dimerizing Terminal Blocks and an Intrinsically Disordered Region for Rational Design of Condensate Properties.

Condensates are molecular assemblies that are formed through liquid-liquid phase separation and play important roles in many biological processes. The rational design of condensate formation and their properties is central to applications, such as biosynthetic materials, synthetic biology, and for understanding cell biology. Protein engineering is used to make a triblock structure with varying terminal blocks of folded proteins on both sides of an intrinsically disordered mid-region. Dissociation constants are determined in the range of micromolar to millimolar for a set of proteins suitable for use as terminal blocks. Varying the weak dimerization of terminal blocks leads to an adjustable tendency for condensate formation while keeping the intrinsically disordered region constant. The dissociation constants of the terminal domains correlate directly with the tendency to undergo liquid-liquid phase separation. Differences in physical properties, such as diffusion rate are not directly correlated with the strength of dimerization but can be understood from the properties and interplay of the constituent blocks. The work demonstrates the importance of weak interactions in condensate formation and shows a principle for protein design that will help in fabricating functional condensates in a predictable and rational way.

Spidroins under the Influence of Alcohol: Effect of Ethanol on Secondary Structure and Molecular Level Solvation of Silk-Like Proteins.

Future sustainable materials based on designer biomolecules require control of the solution assembly, but also interfacial interactions. Alcohol treatments of protein materials are an accessible means to this, making understanding of the process at the molecular level of seminal importance. We focus here on the influence of ethanol on spidroins, the main proteins of silk. By large-scale atomistically detailed molecular dynamics (MD) simulations and interconnected experiments, we characterize the protein aggregation, secondary structure changes, molecular level origins of them, and solvation environment changes for the proteins, as induced by ethanol as a solvation additive. The MD and circular dichoroism (CD) findings jointly show that ethanol promotes ordered structure in the protein molecules, leading to an increase of helix content and turns but also increased aggregation, as revealed by dynamic light scattering (DLS) and light microscopy. The structural changes correlate at the molecular level with increased intramolecular hydrogen bonding. The simulations reveal that polar amino acids, such as glutamine and serine, are most influenced by ethanol, whereas glycine residues are most prone to be involved in the ethanol-induced secondary structure changes. Furthermore, ethanol engages in interactions with the hydrophobic alanine-rich regions of the spidroin, significantly decreasing the hydrophobic interactions of the protein with itself and its surroundings. The protein solutes also change the microstructure of water/ethanol mixtures, essentially decreasing the level of larger local clustering. Overall, the work presents a systematic characterization of ethanol effects on a widely used, common protein type, spidroins, and generalizes the findings to other intrinsically disordered proteins by pinpointing the general features of the response. The results can aid in designing effective alcohol treatments for proteins, but also enable design and tuning of protein material properties by a relatively controllable solvation handle, the addition of ethanol.

A Minispidroin Guides the Molecular Design for Cellular Condensation Mechanisms in S. cerevisiae.

Structural engineering of molecules for condensation is an emerging technique within synthetic biology. Liquid-liquid phase separation of biomolecules leading to condensation is a central step in the assembly of biological materials into their functional forms. Intracellular condensates can also function within cells in a regulatory manner to facilitate reaction pathways and to compartmentalize interactions. We need to develop a strong understanding of how to design molecules for condensates and how their in vivo-in vitro properties are related. The spider silk protein NT2RepCT undergoes condensation during its fiber-forming process. Using parallel in vivo and in vitro characterization, in this study, we mapped the effects of intracellular conditions for NT2RepCT and its several structural variants. We found that intracellular conditions may suppress to some extent condensation whereas molecular crowding affects both condensate properties and their formation. Intracellular characterization of protein condensation allowed experiments on pH effects and solubilization to be performed within yeast cells. The growth of intracellular NT2RepCT condensates was restricted, and Ostwald ripening was not observed in yeast cells, in contrast to earlier observations in E. coli. Our results lead the way to using intracellular condensation to screen for properties of molecular assembly. For characterizing different structural variants, intracellular functional characterization can eliminate the need for time-consuming batch purification and in vitro condensation. Therefore, we suggest that the in vivo-in vitro understanding will become useful in, e.g., high-throughput screening for molecular functions and in strategies for designing tunable intracellular condensates.

Pulling and analyzing silk fibers from aqueous solution using a robotic device.

Spiders, silkworms, and many other animals can spin silk with exceptional properties. However, artificially spun fibers often fall short of their natural counterparts partly due sub-optimal production methods. A variety of methods, such as wet-, dry-, and biomimetic spinning have been used. The methods are based on extrusion, whereas natural spinning also involves pulling. Another shortcoming is that there is a lack feedback control during extension. Here we demonstrate a robotic fiber pulling device that enables controlled pulling of silk fibers and in situ measurement of extensional forces during the pulling and tensile testing of the pulled fibers. The pulling device was used to study two types of silk-one recombinant spider silk (a structural variant of ADF3) and one regenerated silk fibroin. Also, dextran-a branched polysaccharide-was used as a reference material for the procedure due to its straightforward preparation and storage. No post-treatments were applied. The pulled regenerated silk fibroin fibers achieved high tensile strength in comparison to similar extrusion-based methods. The mechanical properties of the recombinant spider silk fibers seemed to be affected by the liquid-liquid phase separation of the silk proteins.

pH dependence of the assembly mechanism and properties of poly(L-lysine) and poly(L-glutamic acid) complexes.

We show by extensive experimental characterization combined with molecular simulations that pH has a major impact on the assembly mechanism and properties of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) complexes. A combination of dynamic light scattering (DLS) and laser Doppler velocimetry (LDV) is used to assess the complexation, charge state, and other physical characteristics of the complexes, isothermal titration calorimetry (ITC) is used to examine the complexation thermodynamics, and circular dichroism (CD) is used to extract the polypeptides' secondary structure. For enhanced analysis and interpretation of the data, analytical ultracentrifugation (AUC) is used to define the precise molecular weights and solution association of the peptides. Molecular dynamics simulations reveal the associated intra- and intermolecular binding changes in terms of intrinsic vs. extrinsic charge compensation, the role of hydrogen bonding, and secondary structure changes, aiding in the interpretation of the experimental data. We combine the data to reveal the pH dependency of PLL/PGA complexation and the associated molecular level mechanisms. This work shows that not only pH provides a means to control complex formation but also that the associated changes in the secondary structure and binding conformation can be systematically used to control materials assembly. This gives access to rational design of peptide materials via pH control.

Shaping Liquid Droplets on an Active Air-Ferrofluid Interface.

An air-liquid interface is important in many biological and industrial applications, where the manipulation of liquids on the air-liquid interface can have a significant impact. However, current manipulation techniques on the interface are mostly limited to transportation and trapping. Here, we report a magnetic liquid shaping method that can squeeze, rotate, and shape nonmagnetic liquids on an air-ferrofluid interface with programmable deformation. We can control the aspect ratio of the ellipse and generate repeatable quasi-static shapes of a hexadecane oil droplet. We can rotate droplets and stir liquids into spiral-like structures. We can also shape phase-changing liquids and fabricate shape-programmed thin films at the air-ferrofluid interface. The proposed method may potentially open up new possibilities for film fabrication, tissue engineering, and biological experiments that can be carried out at an air-liquid interface.

Repurposing host-guest chemistry to sequester virulence and eradicate biofilms in multidrug resistant Pseudomonas aeruginosa and Acinetobacter baumannii.

The limited diversity in targets of available antibiotic therapies has put tremendous pressure on the treatment of bacterial pathogens, where numerous resistance mechanisms that counteract their function are becoming increasingly prevalent. Here, we utilize an unconventional anti-virulence screen of host-guest interacting macrocycles, and identify a water-soluble synthetic macrocycle, Pillar[5]arene, that is non-bactericidal/bacteriostatic and has a mechanism of action that involves binding to both homoserine lactones and lipopolysaccharides, key virulence factors in Gram-negative pathogens. Pillar[5]arene is active against Top Priority carbapenem- and third/fourth-generation cephalosporin-resistant Pseudomonas aeruginosa and Acinetobacter baumannii, suppressing toxins and biofilms and increasing the penetration and efficacy of standard-of-care antibiotics in combined administrations. The binding of homoserine lactones and lipopolysaccharides also sequesters their direct effects as toxins on eukaryotic membranes, neutralizing key tools that promote bacterial colonization and impede immune defenses, both in vitro and in vivo. Pillar[5]arene evades both existing antibiotic resistance mechanisms, as well as the build-up of rapid tolerance/resistance. The versatility of macrocyclic host-guest chemistry provides ample strategies for tailored targeting of virulence in a wide range of Gram-negative infectious diseases.

Highly Hydrophobic Films of Engineered Silk Proteins by a Simple Deposition Method.

Molecular engineering of protein structures offers a uniquely versatile route for novel functionalities in materials. Here, we describe a method to form highly hydrophobic thin films using genetically engineered spider silk proteins. We used structurally engineered protein variants containing ADF3 and AQ12 spider silk sequences. Wetting properties were studied using static and dynamic contact angle measurements. Solution conditions and the surrounding humidity during film preparation were key parameters to obtain high hydrophobicity, as shown by contact angles in excess of 120°. Although the surface layer was highly hydrophobic, its structure was disrupted by the added water droplets. Crystal-like structures were found at the spots where water droplets had been placed. To understand the mechanism of film formation, different variants of the proteins, the topography of the films, and secondary structures of the protein components were studied. The high contact angle in the films demonstrates that the conformations that silk proteins take in the protein layer very efficiently expose their hydrophobic segments. This work reveals a highly amphiphilic nature of silk proteins and contributes to an understanding of their assembly mechanisms. It will also help in designing diverse technical uses for recombinant silk.

Biomolecular Click Reactions Using a Minimal pH-Activated Catcher/Tag Pair for Producing Native-Sized Spider-Silk Proteins.

A type of protein/peptide pair known as Catcher/Tag pair spontaneously forms an intermolecular isopeptide bond which can be applied for biomolecular click reactions. Covalent protein conjugation using Catcher/Tag pairs has turned out to be a valuable tool in biotechnology and biomedicines, but it is essential to increase the current toolbox of orthogonal Catcher/Tag pairs to expand the range of applications further, for example, for controlled multiple-fragment ligation. We report here the engineering of novel Catcher/Tag pairs for protein ligation, aided by a crystal structure of a minimal CnaB domain from Lactobacillus plantarum. We show that a newly engineered pair, called SilkCatcher/Tag enables efficient pH-inducible protein ligation in addition to being compatible with the widely used SpyCatcher/Tag pair. Finally, we demonstrate the use of the SilkCatcher/Tag pair in the production of native-sized highly repetitive spider-silk-like proteins with >90 % purity, which is not possible by traditional recombinant production methods.

Recombinant protein condensation inside E. coli enables the development of building blocks for bioinspired materials engineering - Biomimetic spider silk protein as a case study.

Recombinant expression of proteins destined to form biological materials often results in poor production yields or loss of their function due to premature aggregation. Recently, liquid-liquid phase separation has been proposed as a mechanism to control protein solubility during expression and accumulation in the cytoplasm. Here, we investigate this process in vivo during the recombinant overexpression of the mimetic spider silk mini-spidroin NT2RepCT in Escherichia coli. The protein forms intracellular liquid-like condensates that shift to a solid-like state triggered by a decrease in their microenvironmental pH. These features are also maintained in the purified sample in vitro both in the presence of a molecular crowding agent mimicking the bacterial intracellular environment, and during a biomimetic extrusion process leading to fiber formation. Overall, we demonstrate that characterization of protein condensates inside E. coli could be used as a basis for selecting proteins for both materials applications and their fundamental structure-function studies.

Biological activity of multicomponent bio-hydrogels loaded with tragacanth gum.

Producing hydrogels capable of mimicking the biomechanics of soft tissue remains a challenge. We explore the potential of plant-based hydrogels as polysaccharide tragacanth gum and antioxidant lignin nanoparticles in bioactive multicomponent hydrogels for tissue engineering. These natural components are combined with TEMPO-oxidized cellulose nanofibrils, a material with known shear thinning behavior. Hydrogels presented tragacanth gum (TG) concentration-dependent rheological properties suitable for extrusion 3D printing. TG enhanced the swelling capacity up to 645% and the degradation rate up to 1.3%/day for hydrogels containing 75% of TG. Young's moduli of the hydrogels varied from 5.0 to 11.6 kPa and were comparable to soft tissues like skin and muscle. In vitro cell viability assays revealed that the scaffolds were non-toxic and promoted proliferation of hepatocellular carcinoma HepG2 cells. Therefore, the plant-based hydrogels designed in this work have a significant potential for tissue engineering.

Liquid-Liquid Phase Separation and Assembly of Silk-like Proteins is Dependent on the Polymer Length.

Phase transitions have an essential role in the assembly of nature's protein-based materials into hierarchically organized structures, yet many of the underlying mechanisms and interactions remain to be resolved. A central question for designing proteins for materials is how the protein architecture and sequence affects the nature of the phase transitions and resulting assembly. In this work, we produced 82 kDa (1×), 143 kDa (2×), and 204 kDa (3×) silk-mimicking proteins by taking advantage of protein ligation by SpyCatcher/Tag protein-peptide pair. We show that the three silk proteins all undergo a phase transition from homogeneous solution to assembly formation. In the assembly phase, a length- and concentration-dependent transition between two distinct assembly morphologies, one forming aggregates and another coacervates, exists. The coacervates showed properties that were dependent on the protein size. Computational modeling of the proteins by a bead-spring model supports the experimental results and provides us a possible mechanistic origin for the assembly transitions based on architectures and interactions.

Emergence of Elastic Properties in a Minimalist Resilin-Derived Heptapeptide upon Bromination.

Bromination is herein exploited to promote the emergence of elastic behavior in a short peptide-SDSYGAP-derived from resilin, a rubber-like protein exerting its role in the jumping and flight systems of insects. Elastic and resilient hydrogels are obtained, which also show self-healing behavior, thanks to the promoted non-covalent interactions that limit deformations and contribute to the structural recovery of the peptide-based hydrogel. In particular, halogen bonds may stabilize the ß-sheet organization working as non-covalent cross-links between nearby peptide strands. Importantly, the unmodified peptide (i.e., wild type) does not show such properties. Thus, SDSY(3,5-Br)GAP is a novel minimalist peptide elastomer.

Interfacial Crystallization and Supramolecular Self-Assembly of Spider Silk Inspired Protein at the Water-Air Interface.

Macromolecular assembly into complex morphologies and architectural shapes is an area of fundamental research and technological innovation. In this work, we investigate the self-assembly process of recombinantly produced protein inspired by spider silk (spidroin). To elucidate the first steps of the assembly process, we examined highly concentrated and viscous pendant droplets of this protein in air. We show how the protein self-assembles and crystallizes at the water-air interface into a relatively thick and highly elastic skin. Using time-resolved in situ synchrotron x-ray scattering measurements during the drying process, we showed that the skin evolved to contain a high ß-sheet amount over time. We also found that ß-sheet formation strongly depended on protein concentration and relative humidity. These had a strong influence not only on the amount, but also on the ordering of these structures during the ß-sheet formation process. We also showed how the skin around pendant droplets can serve as a reservoir for attaining liquid-liquid phase separation and coacervation from the dilute protein solution. Essentially, this study shows a new assembly route which could be optimized for the synthesis of new materials from a dilute protein solution and determine the properties of the final products.