RESUMEN
The behavior of As is closely related to trans(formation) of ferrihydrite, which often coprecipitates with extracellular polymeric substances (EPS), forming EPS-mineral aggregates in natural environments. While the effect of EPS on ferrihydrite properity, mineralogy reductive transformation, and associated As fate in sulfate-reducing bacteria (SRB)-rich environments remains unclear. In this research, ferrihydrite-EPS aggregates were synthesized and batch experiments combined with spectroscopic, microscopic, and geochemical analyses were conducted to address these knowledge gaps. Results indicated that EPS blocked micropores in ferrihydrite, and altered mineral surface area and susceptibility. Although EPS enhanced Fe(III) reduction, it retarded ferrihydrite transformation to magnetite by inhibiting Fe atom exchange in systems with low SO42-. As a result, 16% of the ferrihydrite was converted into magnetite in the Fh-0.3 treatment, and no ferrihydrite transformation occurred in the Fh-EPS-0.3 treatment. In systems with high SO42-, however, EPS promoted mackinawite formation and increased As mobilization into the solution. Additionally, the coprecipitated EPS facilitated As(V) reduction to more mobilized As(III) and decreased conversion of As into the residual phase, enhancing the potential risk of As contamination. These findings advance our understanding on biogeochemistry of elements Fe, S, and As and are helpful for accurate prediction of As behavior.
Asunto(s)
Arsénico , Matriz Extracelular de Sustancias Poliméricas , Compuestos Férricos , Compuestos Férricos/química , Arsénico/química , Arsénico/metabolismo , Matriz Extracelular de Sustancias Poliméricas/metabolismo , Matriz Extracelular de Sustancias Poliméricas/química , Contaminantes Químicos del Agua/químicaRESUMEN
Tuning the active site structure of metal-nitrogen-carbon electrocatalysts has recently attracted increasing interest. Herein, we report a bottom-up synthesis strategy in which atomically regulated N-doped polycyclic aromatic hydrocarbons (N-PAHs) of NxC42-x (x = 1, 2, 3, 4) were used as ligands to allow tuning of the active site's structures of M-Nx and establish correlations between the structures and electrocatalytic properties. Based on the synthesis process, detailed characterization, and DFT calculation results, active structures of Nx-Fe1-Nx in Fe1-Nx/RGO catalysts were constructed. The results demonstrated that the extra uncoordinated N atoms around the Fe1-N4 moieties disrupted the π-conjugated NxC42-x ligands, which led to more localized electronic state in the Fe1-N4 moieties and superior catalytic performance. Especially, the Fe1-N4/RGO exhibited optimized performance for ORR with E1/2 increasing by 80 mV and Jk at 0.85 V improved 18 times (compared with Fe1-N1/RGO). This synthesis strategy utilizing N-PAHs holds significant promise for enhancing the controllability of metal-nitrogen-carbon electrocatalyst preparation.
RESUMEN
Intraparticle domains are the critical locations for storing contaminants and retarding contaminant transport in subsurface environments. While the kinetics and extent of antibiotics sorption and desorption in subsurface materials have been extensively studied, their behaviors in intraparticle domains have not been well understood. This study investigated the sorption and desorption of antibiotics (ATs) in the intraparticle domains using quartz grains and clay, and antibiotic tetracycline (TC) and levofloxacin (LEV) as examples that are commonly present in groundwater systems. Batch experiments coupled with the analyses using various microscopic and spectroscopic techniques were performed to investigate the sorption and desorption kinetics, and to provide insights into the intraparticle sorption and desorption of TC and LEV. Results indicated that both TC and LEV with different physiochemical properties can migrate into intraparticle domains that were consistent with sorptive diffusion. The rate and extent of the sorption are a function of intraparticle surface area and properties, pore volume and connectivity, and ionic properties of the ATs. The sorptive diffusion led to the slow desorption of both TC and LEV after their sorption, apparently showing an irreversible desorption behavior (with desorption percentage about 1.86-20.51%). These results implied that intraparticle domains can be important locations for storing ATs, retarding ATs transport, and may serve as a long-term secondary source for groundwater contamination.
Asunto(s)
Antibacterianos , Tetraciclina , Adsorción , Arcilla , Levofloxacino , CinéticaRESUMEN
Environmental photocatalysis is a promising technology for treating antibiotics in wastewater. In this study, a supercritical carbonization method was developed to synthesize a single-atom photocatalyst with a high loading of Ni (above 5 wt.%) anchored on a carbon-nitrogen-silicate substrate for the efficient photodegradation of a ubiquitous environmental contaminant of tetracycline (TC). The photocatalyst was prepared from an easily obtained metal-biopolymer-inorganic supramolecular hydrogel, followed by supercritical drying and carbonization treatment. The low-temperature (300°C) supercritical ethanol treatment prevents the excessive structural degradation of hydrogel and greatly reduces the metal clustering and aggregation, which contributed to the high Ni loading. Atomic characterizations confirmed that Ni was present at isolated sites and stabilized by Ni-N and Ni-O bonds in a Ni-(N/O)6C/SiC configuration. A 5% Ni-C-Si catalyst, which performed the best among the studied catalysts, exhibited a wide visible light response with a narrow bandgap of 1.45 eV that could efficiently and repeatedly catalyze the oxidation of TC with a conversion rate of almost 100% within 40 min. The reactive species trapping experiments and electron spin resonance (ESR) tests demonstrated that the h+, and ·O2- were mainly responsible for TC degradation. The TC degradation mechanism and possible reaction pathways were provided also. Overall, this study proposed a novel strategy to synthesize a high metal loading single-atom photocatalyst that can efficiently remove TC with high concentrations, and this strategy might be extended for synthesis of other carbon-based single-atom catalysts with valuable properties.
Asunto(s)
Compuestos Heterocíclicos , Níquel , Fotólisis , Temperatura , Tetraciclina , Antibacterianos , Carbono , Catálisis , Hidrogeles , LuzRESUMEN
An iterative approach between machine learning (ML) and laboratory experiments was developed to accelerate the design and synthesis of environmental catalysts (ECs) using selective catalytic reduction (SCR) of nitrogen oxides (NOx) as an example. The main steps in the approach include training a ML model using the relevant data collected from the literature, screening candidate catalysts from the trained model, experimentally synthesizing and characterizing the candidates, updating the ML model by incorporating the new experimental results, and screening promising catalysts again with the updated model. This process is iterated with a goal to obtain an optimized catalyst. Using the iterative approach in this study, a novel SCR NOx catalyst with low cost, high activity, and a wide range of application temperatures was found and successfully synthesized after four iterations. The approach is general enough that it can be readily extended for screening and optimizing the design of other environmental catalysts and has strong implications for the discovery of other environmental materials.
Asunto(s)
Amoníaco , Óxidos , Óxidos de Nitrógeno , Oxidación-Reducción , Temperatura , CatálisisRESUMEN
Cr(VI) detoxification and organic matter (OM) stabilization are usually influenced by the biological transformation of iron (Fe) minerals; however, the underlying mechanisms of metal-reducing bacteria on the coupled kinetics of Fe minerals, Cr, and OM remain unclear. Here, the reductive sequestration of Cr(VI) and immobilization of fulvic acid (FA) during the microbially mediated phase transformation of ferrihydrite with varying Cr/Fe ratios were investigated. No phase transformation occurred until Cr(VI) was completely reduced, and the ferrihydrite transformation rate decreased as the Cr/Fe ratio increased. Microscopic analysis was uncovered, which revealed that the resulting Cr(III) was incorporated into the lattice structure of magnetite and goethite, whereas OM was mainly adsorbed on goethite and magnetite surfaces and located within pore spaces. Fine line scan profiles showed that OM adsorbed on the Fe mineral surface had a lower oxidation state than that within nanopores, and C adsorbed on the magnetite surface had the highest oxidation state. During reductive transformation, the immobilization of FA by Fe minerals was predominantly via surface complexation, and OM with highly aromatic and unsaturated structures and low H/C ratios was easily adsorbed by Fe minerals or decomposed by bacteria, whereas Cr/Fe ratios had little effect on the binding of Fe minerals and OM and the variations in OM components. Owing to the inhibition of crystalline Fe minerals and nanopore formation in the presence of Cr, Cr sequestration and C immobilization can be synchronously favored at low Cr/Fe ratios. These findings provide a profound theoretical basis for Cr detoxification and synchronous sequestration of Cr and C in anoxic soils and sediments.
Asunto(s)
Óxido Ferrosoférrico , Minerales , Minerales/química , Compuestos Férricos/química , Cromo/química , Oxidación-ReducciónRESUMEN
Understanding the adsorption behavior of antibiotic molecules on minerals is crucial for determining the environmental fate and transport of antibiotics in soils and waters. However, the microscopic mechanisms that govern the adsorption of common antibiotics, such as the molecular orientation during the adsorption process and the conformation of sorbate species, are not well understood. To address this gap, we conducted a series of molecular dynamics (MD) simulations and thermodynamics analyses to investigate the adsorption of two typical antibiotics, tetracycline (TET) and sulfathiazole (ST), on the surface of montmorillonite. The simulation results indicated that the adsorption free energy ranged from - 23 to - 32 kJ·mol-1, and - 9 to - 18 kJ·mol-1 for TET and ST, respectively, which was consistent with the measured difference of sorption coefficient (Kd) for TET-montmorillonite of 11.7 L·g-1 and ST-montmorillonite of 0.014 L·g-1. The simulations also found that TET was adsorbed through dimethylamino groups (85% in probability) with a molecular conformation vertical to the montmorillonite's surface, while ST was adsorbed through sulfonyl amide group (95% in probability) with vertical, tilted and parallel conformations on the surface. The results confirmed that molecular spatial orientations could affect the adsorption capacity between antibiotics and minerals. Overall, the microscopic adsorption mechanisms revealed in this study provide critical insights into the complexities of antibiotics adsorption to soil and facilitate the prediction of adsorption capacity of antibiotics on minerals and their environmental transport and fate. This study contributes to our understanding of the environmental impacts of antibiotic usage and highlights the importance of considering molecular-level processes when assessing the fate and transport of antibiotics in the environment.
Asunto(s)
Antibacterianos , Bentonita , Arcilla , Minerales , Suelo , Tetraciclina , Sulfatiazol , Silicatos de AluminioRESUMEN
Coupled reactions among chromium (Cr), organic matter (OM), and iron (Fe) minerals play significant roles in Cr and carbon (C) cycling in Cr-contaminated soils. Although the inhibitory effects of Cr or polysaccharides acid (PGA) on ferrihydrite transformation have been widely studied, mechanistic insights into detoxification of Cr(VI) and immobilization of Cr and C during the microbially mediated reductive transformation of ferrihydrite remain unclear. In this study, underlying sequestration mechanisms of Cr and C during dissimilatory Fe reduction at various Cr/Fe ratios were investigated. Solid-phase analysis showed that reductive transformation rates of ferrihydrite were impeded by high Cr/Fe ratio and more magnetite was found at low Cr loadings. Microscopic analysis showed that formed Cr(III) was immobilized by magnetite and goethite through isomorphous substitution, whereas PGA was adsorbed on the crystalline Fe mineral surface. Spectroscopic results uncovered that binding of Fe minerals and PGA was achieved by surface complexation of structural Fe with carboxyl functional groups, and that the adhesion order of PGA functional groups and Fe minerals was influenced by the Cr/Fe ratios. These findings have significant implications for remediating Cr contaminants, realizing C fixation, and developing a quantitative model for Cr and C cycling by coupling reductive transformation in Cr-contaminated environments.
Asunto(s)
Compuestos Férricos , Óxido Ferrosoférrico , Compuestos Férricos/química , Minerales/química , Cromo/química , Biotransformación , Oxidación-ReducciónRESUMEN
Models and information and communication technology (ICT) can assist in the effective supervision of urban receiving water bodies and drainage systems. Single model-based decision tools, e.g., water quality models and the pollution source identification (PSI) method, have been widely reported in this field. However, a systematic pathway for environmental decision support system (EDSS) construction by integrating advanced single techniques has rarely been reported, impeding engineering applications. This paper presents an integrated supervision framework (UrbanWQEWIS) involving monitoring-early warning-source identification-emergency disposal to safeguard the urban water quality, where the data, model, equipment and knowledge are smoothly and logically linked. The generic architecture, all-in-one equipment and three key model components are introduced. A pilot EDSS is developed and deployed in the Maozhou River, China, with the assistance of environmental Internet of Things (IoT) technology. These key model components are successfully validated via in situ monitoring data and dye tracing experiments. In particular, fluorescence fingerprint-based qualitative PSI and Bayesian-based quantitative PSI methods are effectively coupled, which can largely reduce system costs and enhance flexibility. The presented supervision framework delivers a state-of-the-art management tool in the digital water era. The proposed technical pathway of EDSS development provides a valuable reference for other regions.
Asunto(s)
Ríos , Calidad del Agua , Teorema de Bayes , Agua Dulce , Comunicación , Contaminación del Agua/análisisRESUMEN
Although PO43- is commonly found in association with iron (oxyhydr)oxide, the effect of PO43- on ferrihydrite reduction, mineralogical transformation, and associated As behavior in sulfate-reducing bacteria (SRB)-rich environments remains unclear. In this study, batch experiments, together with geochemical, mineralogical, and biological analyses, were conducted to elucidate these processes. The results showed that SRB can reduce ferrihydrite via direct and indirect processes, and PO43- promoted ferrihydrite reduction by supporting SRB growth at low and medium PO43- loadings. However, at high loadings, PO43- stabilized the ferrihydrite. PO43- shifted the transformation of ferrihydrite from magnetite and mackinawite to vivianite, which scavenges As effectively by incorporating As into its particle. In systems with 0.5 mM SO42-, PO43- exerted a weak effect on As mobilization. However, in systems with 10 mM SO42-, substantial amounts of As were released into the solution, and PO43- impacted As behavior strongly. Low PO43- loadings increased the mobilization of As because of the competitive adsorption of PO43- on mackinawite. Medium and high PO43- loadings were beneficial for As immobilization because of the substitution of mackinawite by vivianite. These findings have important implications for understanding the biogeochemistry of iron (oxyhydr)oxide and As behavior in SRB-containing sediments.
Asunto(s)
Arsénico , Arsénico/metabolismo , Sulfatos/metabolismo , Oxidación-Reducción , Compuestos Férricos/metabolismo , Hierro/metabolismo , Fosfatos/metabolismo , Óxidos/metabolismo , Óxidos de Azufre/metabolismo , Bacterias/metabolismoRESUMEN
Interactions between manganese (Mn) and iron (Fe) are widespread processes in soils and sediments, however, the abiotic transformation mechanisms are not fully understood. Herein, Mn(II) oxidation on hematite were investigated at various pH under oxic condition. Mn(II) oxidation rates increased from 3 × 10-4 to 8 × 10-2 h-1 as pH increased from 7.0 to 9.0, whereas hematite enhanced Mn(II) oxidation rates to 1 h-1. During oxidation process, high pH could promote the oxidation of Mn(II) into Mn minerals, resulting in the rapid consumption of the newly-formed H+, and high pH facilitated Mn(II) adsorption and oxidation by altering Mn(II) reactivity and speciation. Only granule-like hausmannite was found on the hematite surface at pH 7.0, whereas hausmannite particles and feitknechtite and manganite nanowires were formed at pH from 7.5 to 9.0. Moreover, a co-shell structured nanowire composed of manganite and feitknechtite was observed owing to autocatalytic reactions. Specifically, electron transfers between Mn(II) and O2 occurred on the surface or through bulk phase of hematite, and direct electron transfers in the O2-Mn(II) complex and indirect electron transfers in the O2-Fe(II/III)-Mn(II) complex may both have contribution to the overall reactions. The findings provide a comprehensive interpretation of Fe-Mn interaction and have implications for the formation of soil Fe-Mn oxyhydroxides with unique properties in controlling element cycling.
RESUMEN
Quantitative assessment of the responses of biofilm structure to external hydrodynamics is critical for understanding biofilm detachment mechanisms. This study used multidimensional imaging and numerical simulation approaches to elucidate the complex relationships between biofilm detachment and hydrodynamics with Shewanella oneidensis MR-1. By integrating real-time confocal laser scanning microscopy (CLSM) images with image analysis tools, the three-dimensional structural changes occurring in thin MR-1 biofilms (<10 µm) under hydrodynamic treatment at a flow velocity of 0.42 × 10-3 to 3.3 × 10-3 m/s in the laminar flow regime were visualized in situ and quantified with single-cell resolution. Analyses of the imaging results revealed high spatial heterogeneity in the degree and intensity of biofilm detachment. Spots with thick and rough biofilm surfaces or high flow rates had high detachment rates, indicating that local biofilm morphology, including thickness and roughness, and hydrodynamic flow conditions collectively controlled the detachment rate. Numerical simulations revealed a significant correlation between local detachment events and the shear stress induced by hydraulic flow at the three-dimensional level. Compared to the even or thin biofilm, a thick or rough structure might induce a 2-fold increase in shear stress over local biofilm surfaces at a microscale dimension. The results provide quantitative and microscopic insights into biofilm detachment processes in subsurface environments, especially in domains under dynamic flow conditions, such as those in hyporheic zones. The relationship between biofilm detachment and hydrodynamics and biofilm structural factors can be integrated into reactive transport models used to describe microbial growth and transport in porous media. IMPORTANCE Detachment is an important process determining the structure and function of bacterial biofilm, which has significant implications for biogeochemical cycling of elements, biofilm application, and infection control in clinical settings. Quantifying the responses of biofilm structure to hydrodynamics is crucial for understanding biofilm detachment mechanisms in aquatic environments. In this work, the spatial and temporal changes occurring in biofilm structures in response to different hydrodynamic conditions were studied by using flow cell reactors. We established the quantitative relationships among detachment, biofilm morphology, and shear stress induced by changes in hydrodynamic conditions. This work provides a quantitative understanding of the complex relationship between biofilm detachment and hydrodynamics in natural environments.
Asunto(s)
Biopelículas , Hidrodinámica , Estrés Mecánico , Simulación por Computador , PorosidadRESUMEN
Bacterial communities are crucial for processing and degrading contaminants in hyporheic zones (HZ). However, the effects of antibiotics on HZ bacterial communities have seldom been addressed. Here, using MiSeq 16S amplicon sequencing technology, the effects of acute exposure to Enrofloxacin, Sulfathiazole, Tetracycline hydrochloride, and Penicillin V potassium on HZ bacterial communities were investigated. Results revealed that HZ sediment communities responded differently to different classes of antibiotics, reflecting the distinct selection stress of antibiotics on HZ bacterial communities. Besides, HZ communities from the locations with more severe antibiotic contamination backgrounds (â¼150 µg kg-1) were more resistant towards antibiotic treatment. Compared with small/non-significant changes in HZ community diversity and composition treated with ng L-1â¼ug L-1 level antibiotics compared to the control group, treatments with antibiotics over mg L-1 level significantly reduced the diversity and changed the structures of HZ bacterial communities, and enhanced the resistance of the community to antibiotics by enriching antibiotic resistant bacteria. The exposure to mg L-1 level antibiotics also changed community functions by restricting the growth of functional bacteria, such as ammonia oxidizing bacteria (AOB) Nitrosomonas, resulting in ammonia accumulation in sediments. The results implied that at field-relevant concentrations, there was no or minor effect of antibiotics on HZ bacterial community structure and functions, and only those areas with high antibiotic concentrations would have effects.
Asunto(s)
Amoníaco , Antibacterianos , Amoníaco/química , Antibacterianos/farmacología , Sedimentos Geológicos/microbiología , Tetraciclina , Penicilina V , Enrofloxacina , Bacterias , SulfatiazolesRESUMEN
Interfacial reactions between iron (Fe) (hydr)oxide surfaces and the activity of bacteria during dissimilatory Fe reduction affect extracellular electron transfer. The presence of organic matter (OM) and exposed facets of Fe (hydr)oxides influence this process. However, the underlying interfacial mechanism of facet-dependent hematite and its toxicity toward microbes during bioreduction in the presence of OM remains unknown. Herein, humic acid (HA), as typical OM, was selected to investigate its effect on the bioreduction of hematite {100} and {001}. When HA concentration was increased from 0 to 500 mg L-1, the bioreduction rates increased from 0.02 h-1 to 0.04 h-1 for hematite {100} and from 0.026 h-1 to 0.05 h-1 for hematite {001}. Since hematite {001} owned lower resistance than hematite {100} irrespective of the HA concentration, and hematite {100} was less favorable for reduction. Microscopy-based analysis showed that more hematite {001} nanoparticles adhered to the cell surface and were bound more closely to the bacteria. Moreover, less cell damage was observed in the HA-hematite {001} treatments. As the reaction progressed, some bacterial cells died or were inactivated; confocal laser scanning microscopy showed that bacterial survival was higher in the HA-hematite {001} treatments than in the HA-hematite {100} treatments after bioreduction. Spectroscopic analysis revealed that facet-dependent binding was primarily realized by surface complexation of carboxyl functional groups with structural Fe atoms, and that the binding order of HA functional groups and hematite was affected by the exposed facets. The exposed facets of hematite could influence the electrochemical properties and activity of bacteria, as well as the binding of bacteria and Fe oxides in the presence of OM, thereby governing the extracellular electron transfer and concomitant bioreduction of Fe (hydr)oxides. These results provide new insights into the interfacial reactions between OM and facet-dependent Fe oxides in anoxic, OM-rich soil and sediment environments.
Asunto(s)
Shewanella putrefaciens , Compuestos Férricos/química , Sustancias Húmicas , Hierro/química , Oxidación-Reducción , Óxidos , Shewanella putrefaciens/metabolismoRESUMEN
The transport and retention of microorganisms are typically described using attachment/detachment and straining/liberation models. However, the parameters in the models varied significantly, posing a significant challenge to describe microbial transport under different environmental conditions. A neural network (ANN) model was developed in this study to link the parameters in the model with the factors influencing microbial transport including the properties of microorganisms such as size and surface potentials, and the properties of porous media such as grain size and porosity, and flow conditions. Exhaustive search of literature renders 420 sets of experimental data of microbial transport, which were fitted using the microbial transport model to obtain model parameters. The model parameters, together with the factors influencing microbial transport, were then used to train an ANN model to search for their relationship. An ANN-based parameter relationship was derived and was then used to simulate microbial transport. The simulated results using the relationship roughly matched with the experimental data under different environmental conditions, indicating that a unified relationship was established between the parameters of the microbial transport model and the factors influencing microbial transport, and that microbial transport can be described using the microbial transport model with the ANN-based unified relationship for model parameters.
Asunto(s)
Aprendizaje Automático , Tamaño de la Partícula , PorosidadRESUMEN
Iron (Fe) oxides and fulvic acid (FA) are the key components affecting the fate of cadmium (Cd) in soil. The presence of FA influences Fe mineral transformation, and FA may complicate phase transformation and dynamic behavior of Cd. How varying Fe minerals and FA affect Cd immobilization during the ferrihydrite transformation induced by various Fe(II) concentrations, however, is still lack of quantitative understanding. In this study, we built a model for Cd species quantification during phase transformation based on mechanistic insights obtained from batch experiments. Spectroscopic analysis showed that Fe(II) concentrations affected secondary Fe minerals formation under the condition of co-existence of Cd and FA, and ultimately changed the distribution of Cd and FA. Microscopic analysis revealed that besides surface adsorption, part of Cd was sequestrated by magnetite, whereas FA was able to diffuse into lepidocrocite defects. The model revealed that adsorbed Cd was mainly controlled by FA and ferrihydrite, and direct complexation of Cd by FA had a strong impact on the continuous change in Cd at lower Fe(II) concentration. The results contribute to an in-depth understanding of the mobility of Cd in the environment and provide a method for quantifying the dynamic behavior of heavy metals in multi-reactant systems.
Asunto(s)
Cadmio , Carbono , Cadmio/química , Compuestos Férricos/química , Óxido Ferrosoférrico , Minerales/química , Oxidación-ReducciónRESUMEN
This study investigated the control of dissolved organic matter (DOM) molecular compositions by microbial community shifts under temperature regulation (range from 5 to 35 °C), using riverine DOM and in situ microorganisms as examples. The functioning of different microbial metabolisms, including the utilization and generation processes, was comprehensively analyzed. Though the overall quantity of DOM was less temperature-affected, more molecules were identified at moderate temperatures (e.g., 15 and 25 °C) and their accumulated mass peak intensities increased with the temperature. The results were ascribed to 1) the microbial production of macromolecular (m/z > 600) CHO, CHON, and CHONS species was stimulated at higher temperatures; 2) the microorganisms consumed more DOM molecules at both higher and lower temperatures; and 3) the simultaneously decreased utilization and increased generation of recalcitrant CHO and CHON molecules with m/z < 600 at higher temperatures. The strong correlations among the temperature, community structures, and DOM chemodiversity suggested that temperature promoted the community evenness to increase the DOM generation. In addition, the higher temperature decreased the abundance of microorganisms that utilized more recalcitrant molecules and produced fewer new molecules (e.g., Proteobacteria, Acinetobacter, and Erythrobacter) while increased others that functioned the opposite (e.g., Verrucomicrobia, Bacteroidetes, and Flavobacterium) to increase the DOM production. The constructed temperature-community-DOM chemistry relationship deepened the molecular-level understanding of DOM variations and provided implications for the warming future.
Asunto(s)
Materia Orgánica Disuelta , Microbiota , TemperaturaRESUMEN
Spatial and temporal variations in groundwater As concentrations are mainly caused by changes in geochemical and hydrodynamic conditions. In this study, the effects of geochemical and hydrodynamic transiency on As desorption and transport in a layered heterogeneous system with preferential flow paths during continuous or intermittent water extraction were investigated. A flume desorption experiment was performed after an adsorption experiment lasting 99 d with competitive adsorption anions (phosphate) in the influent. The results indicated that although competitive adsorption between As and phosphate at the water/solid interface significantly promoted As desorption from solid materials, marked amounts of As desorbed slowly or were on irreversible sorption sites in the system. As adsorbed by the sand and clay near the preferential flow paths was preferentially released, while the release of As from the interiors of the clay zones was limited by diffusion. Water extraction accelerated As transport between the different layers, and this increased the overall rate of As release from zones limited by diffusion. Desorption rate of As in the layered system was fast initially, followed by a period of slow desorption rate that lasted months. The desorption hysteresis was due to slow desorption controlled by diffusion. The results provide important insights for understanding and modeling As desorption and transport in field systems.
Asunto(s)
Agua Subterránea , Contaminantes Químicos del Agua , Adsorción , Arcilla , Hidrodinámica , Fosfatos , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
In this study, a fast one-pot method was developed for the preparation of Cu/CS/Si ternary composites, which can efficiently remove antibiotic tetracycline from aqueous solutions. Our results demonstrated that the Cu and its content in the composites played a significant role in determining the physical properties and internal morphology of the Cu/CS/Si composites, which subsequently affected the efficiency of the composites for the sorptive removal of tetracycline. Among the studied composites, Cu3-CS2-Si materials had the largest sorption capacity for tetracycline (1076.7 mg/g) with a fast sorption kinetics (>99% in 30 min) under a broad working pH range (5-10). The results from the batch sorption experiments, together with spectroscopic and microscopic analyses, collectively indicated that Cu-tetracycline inner-sphere surface complexation through Cu-O bond was responsible for the tetracycline sorption on Cu3-CS2-Si. In addition, the Cu3-CS2-Si showed an excellent reusability in removing tetracycline. The desired sorption and reuse properties, coupled with the facile and cost-effective synthesis method, indicated that Cu/CS/Si composites have a promising potential for the efficient removal of tetracycline from contaminated solutions.
Asunto(s)
Hidrogeles , Dióxido de Silicio , Adsorción , Antibacterianos , Biopolímeros , Cobre/química , Análisis Costo-Beneficio , Concentración de Iones de Hidrógeno , Iones , Cinética , TetraciclinaRESUMEN
Sorption of dissolved organic matter (DOM) is one major pathway in the formation of mineral-associated organic matter (MOM), but there is little information on how previous sorption events feedback to later ones by leaving their imprint on mineral surfaces and solutions ("legacy effect"). In order to conceptualize the role of legacy effects in MOM formation, we conducted sequential sorption experiments with kaolinite and gibbsite as minerals and DOM derived from forest floor materials. The MOM formation efficiency leveled off upon repeated addition of identical DOM solutions to minerals due to the retention of highly sorptive organic molecules (primarily aromatic, nitrogen-poor, hydrogen-poor, and oxygen-rich molecules), which decreased the sorption site availability and simultaneously modified the mineral surface charge. Organic-organic interactions as postulated in multilayer models played a negligible role in MOM formation. Continued exchange between DOM and MOM molecules upon repeated sorption altered the DOM composition but not the MOM formation efficiencies. Sorption-induced depletion of high-affinity compounds from solutions further decreased the MOM formation efficiencies to pristine minerals. Overall, the interplay between the differential sorptivities of DOM components and the mineral surface chemistry explains the legacy effects that contribute to the regulation of fluxes and the distribution of organic matter in the soil.