Comparative study of different sewage sludge incineration treatments based on environmental and economic life cycle assessment.

Incineration is one of the most widely used treatments in the field of sewage sludge disposal. However, the choice of sewage sludge incineration process is still controversial. In this study, the comparative life cycle assessment of sewage sludge incineration processes, including the mono-incineration, co-incineration in coal-fired power plants and co-incineration in municipal solid waste (MSW) incineration plants, was carried out from the perspective of environment, carbon footprint and economy. The environmental assessment results show that terrestrial ecotoxicity, freshwater ecotoxicity, marine ecotoxicity, human carcinogenic toxicity and human non-carcinogenic toxicity are the most significant environmental impacts. And the environmental performance of co-incineration in coal-fired power plants is the best. Moreover, the environmental impact is most sensitive to the dehydrant, electricity and fly ash chelating agent. Co-incineration in MSW incineration plants has the lowest carbon emissions, with only 70.50% and 82% of the carbon emissions from mono-incineration and co-incineration in coal-fired power plants, respectively. Furthermore, sewage sludge mono-incineration has the highest disposal costs because of the higher depreciation and solid waste disposal costs. The comprehensive evaluation results reveal that the optimization should focus on the selection of dehydrant and fly ash chelating agent, as well as the improvement of the equipment efficiency.

Unraveling the capture mechanism of gaseous As2O3 over H-ZSM-5 zeolite from coal-fired flue gas: Experimental and theoretical insights.

Gaseous As2O3 discharged from coal-fired power plants results in severe detriments to the ecological environment. It is of great urgency to develop highly efficient As2O3 capture technology for reducing atmospheric arsenic contamination. Utilizing solid sorbents for gaseous As2O3 capture is a promising treatment for As2O3 capture. The zeolite of H-ZSM-5 was applied for As2O3 capture at high temperatures of 500-900 °C. Special attention was paid to clarifying its capture mechanism and identifying the influence of flue gas components via density functional theory (DFT) calculations and ab initio molecular dynamics (AIMD) simulations. Results revealed that due to high thermal stability with large specific areas, H-ZSM-5 demonstrated excellent arsenic capture at 500-900 °C. The captured arsenic consisted of As3+ and As5+ speciations, ascribed to As2O3 adsorption and oxidation. Moreover, As3+ and As5+ compounds were both through physisorption or chemisorption at 500-600 °C while dominant chemisorption at 700-900 °C. In particular, As3+ compounds were much more steadily fixed in products at all operating temperatures. Combining the characterization analysis and DFT calculations, it further verified that both Si-OH-Al groups and external Al species of H-ZSM-5 could chemisorb As2O3, and the latter exhibited much stronger affinities via orbital hybridization and electron transfer. The introduced O2 could facilitate As2O3 oxidation and fixation in H-ZSM-5, especially at a lower concentration of 2%. Additionally, H-ZSM-5 possessed great acid gas resistance for As2O3 capture under the concentration of NO or SO2 less than 500 ppm. AIMD simulations further identified that compared to NO and SO2, As2O3 was far more competitive and occupied the active sites of the Si-OH-Al groups and external Al species of H-ZSM-5. Overall, it demonstrated that H-ZSM-5 is a promising sorbent for As2O3 capture from coal-fired flue gas.

Experimental Study of NO x Formation in a High-Steam Atmosphere During a Pressurized Oxygen-Fuel Combustion Process.

Pressurized oxy-fuel combustion is considered to be one of the most promising carbon capture technologies due to its low energy consumption and high carbon capture rate. Part of the combustion-supporting environment is composed of circulating flue gas, so the concentration of steam in the carrier gas is higher than that of conventional combustion. However, as an important factor in this technology, steam has not been mentioned in the vast majority of studies. In this study, combustion experiments simulating wet flue gas recycling were performed in a pressurized tube furnace to analyze the effects of the steam ratio (0-40%), oxygen concentration (21-50%), and pressure (0.1-0.6 MPa) on the formation of NO x . The results show that increased system pressure significantly inhibits NO emissions during the oxy-fuel combustion process. Meanwhile, the increase of the injected steam concentration enriches the various radical pool compositions in the carrier gas, inhibiting the formation of NO and N2O. In contrast, the increase of the combustion temperature promotes and inhibits the formation of NO and N2O, respectively, during oxy-fuel pressurized combustion. Moreover, elevated oxygen concentration enhances the oxidation of the carrier gas, leading to an increase in NO emissions.

Arabidopsis CPK6 positively regulates ABA signaling and drought tolerance through phosphorylating ABA-responsive element-binding factors.

Abscisic acid (ABA) regulates numerous developmental processes and drought tolerance in plants. Calcium-dependent protein kinases (CPKs) are important Ca2+ sensors playing crucial roles in plant growth and development as well as responses to stresses. However, the molecular mechanisms of many CPKs in ABA signaling and drought tolerance remain largely unknown. Here we combined protein interaction studies, and biochemical and genetic approaches to identify and characterize substrates that were phosphorylated by CPK6 and elucidated the mechanism that underlines the role of CPK6 in ABA signaling and drought tolerance. The expression of CPK6 is induced by ABA and dehydration. Two cpk6 T-DNA insertion mutants are insensitive to ABA during seed germination and root elongation of seedlings; in contrast, overexpression of CPK6 showed the opposite phenotype. Moreover, CPK6-overexpressing lines showed enhanced drought tolerance. CPK6 interacts with and phosphorylates a subset of core ABA signaling-related transcription factors, ABA-responsive element-binding factors (ABFs/AREBs), and enhances their transcriptional activities. The phosphorylation sites in ABF3 and ABI5 were also identified through MS and mutational analyses. Taken together, we present evidence that CPK6 mediates ABA signaling and drought tolerance through phosphorylating ABFs/AREBs. This work thus uncovers a rather conserved mechanism of calcium-dependent Ser/Thr kinases in ABA signaling.

Experimental investigation of ash deposits on convection heating surfaces of a circulating fluidized bed municipal solid waste incinerator.

Incineration of municipal solid waste (MSW) is a waste treatment method which can be sustainable in terms of waste volume reduction, as well as a source of renewable energy. During MSW combustion, increased formation of deposits on convection heating exchanger surfaces can pose severe operational problems, such as fouling, slagging and corrosion. These problems can cause lower heat transfer efficiency from the hot flue gas to the working fluid inside the tubes. A study was performed where experiments were carried out to examine the ash deposition characteristics in a full-scale MSW circulating fluidized bed (CFB) incinerator, using a newly designed deposit probe that was fitted with six thermocouples and four removable half rings. The influence of probe exposure time and probe surface temperature (500, 560, and 700°C) on ash deposit formation rate was investigated. The results indicate that the deposition mass and collection efficiency achieve a minimum at the probe surface temperature of 560°C. Ash particles are deposited on both the windward and leeward sides of the probe by impacting and thermophoretic/condensation behavior. The major inorganic elements present in the ash deposits are Ca, Al and Si. Compared to ash deposits formed on the leeward side of the probe, windward-side ash deposits contain relatively higher Ca and S concentrations, but lower levels of Al and Si. Among all cases at different surface temperatures, the differences in elemental composition of the ash deposits from the leeward side are insignificant. However, as the surface temperature increases, the concentrations of Al, Si, K and Na in the windward-side ash deposits increase, but the Ca concentration is reduced. Finally, governing mechanisms are proposed on the basis of the experimental data, such as deposit morphology, elemental composition and thermodynamic calculations.

Experimental study of oblique impact between dry spheres and liquid layers.

Liquid addition is common in industrial fluidization-based processes. A detailed understanding of collision mechanics of particles with liquid layers is helpful to optimize these processes. The normal impact with liquid has been studied extensively; however, the studies on oblique impact with liquid are scarce. In this work, experiments are conducted to trace Al_{2}O_{3} spheres obliquely impacting on a surface covered by liquid layers, in which the free-fall spheres are disturbed initially by a horizontal gas flow. The oblique impact exhibits different rebound behaviors from normal collision due to the occurrence of strong rotation. The normal and tangential restitution coefficients (e_{n} and e_{t}) and liquid bridge rupture time (t_{rup}) are analyzed. With increase in liquid layer thickness and viscosity, e_{n} and e_{t} decline, and t_{rup} increases. With increase in tangential velocity, e_{t} decreases first and then increases, whereas e_{n} remains nearly unchanged, and t_{rup} decreases constantly. A modified Stokes number is proposed to further explore the relation between restitution coefficients and the impact parameters. Finally, an analysis of energy dissipation shows that the contact deformation and liquid phase are the two main sources of total energy dissipation. Unexpectedly, the dissipative energy caused by the liquid phase is independent of tangential velocity.

Investigation on dynamic calibration for an optical-fiber solids concentration probe in gas-solid two-phase flows.

This paper presents a review and analysis of the research that has been carried out on dynamic calibration for optical-fiber solids concentration probes. An introduction to the optical-fiber solids concentration probe was given. Different calibration methods of optical-fiber solids concentration probes reported in the literature were reviewed. In addition, a reflection-type optical-fiber solids concentration probe was uniquely calibrated at nearly full range of the solids concentration from 0 to packed bed concentration. The effects of particle properties (particle size, sphericity and color) on the calibration results were comprehensively investigated. The results show that the output voltage has a tendency to increase with the decreasing particle size, and the effect of particle color on calibration result is more predominant than that of sphericity.