Structure and Screening in Confined Electrolytes: The Role of Ion Association.

The effect of ionic association on the structure and property of confined electrolytes is investigated using the classical density functional theory. We find that ionic association strongly affects the ion distribution, surface force, and screening behavior of confined electrolytes. The decay length ξ, which can describe the screening effect of high-concentration electrolytes, satisfies a scaling relationship ξ/λD ∼ (σ/λD)n, with λD being the Debye length and σ representing the ion diameter. We find that n = 1.5 in the nonassociation model, which is contributed by the charge correlation, but n = 3 in the association model, which is contributed by the density correlation. The ion association changes the concentration-dependent characteristics of the screening length by promoting the shift of the decay behavior from the charge-dominated regime to the density-dominated regime. Our result reveals the importance of ion association for electrolyte structure and screening behaviors.

Ionic liquids intercalation in titanium carbide MXenes: A first-principles investigation.

Herein, we present a density functional theory with dispersion correction (DFT-D) calculations that focus on the intercalation of ionic liquids (ILs) electrolytes into the two-dimensional (2D) Ti3C2Tx MXenes. These ILs include the cation 1-ethyl-3-methylimidazolium (Emim+), accompanied by three distinct anions: bis(trifluoromethylsulfonyl)imide (TFSA-), (fluorosulfonyl)imide (FSA-) and fluorosulfonyl(trifluoromethanesulfonyl)imide (FTFSA-). By altering the surface termination elements, we explore the intricate geometries of IL intercalation in neutral, negative, and positive pore systems. Accurate estimation of charge transfer is achieved through five population analysis models, such as Hirshfeld, Hirshfeld-I, DDEC6 (density derived electrostatic and chemical), Bader, and VDD (voronoi deformation density) charges. In this work, we recommend the DDEC6 and Hirshfeld-I charge models, as they offer moderate values and exhibit reasonable trends. The investigation, aimed at visualizing non-covalent interactions, elucidates the role of cation-MXene and anion-MXene interactions in governing the intercalation phenomenon of ionic liquids within MXenes. The magnitude of this role depends on two factors: the specific arrangement of the cation, and the nature of the anionic species involved in the process.

An Investigation into the Transdermal Behavior of Active Ingredients by Combination of Experiments and Multiscale Simulations.

Transdermal behavior is a critical aspect of studying delivery systems and evaluating the efficacy of cosmetics. However, existing methods face challenges such as lengthy experiments, high cost, and limited model accuracy. Therefore, developing accurate transdermal models is essential for formulation development and effectiveness assessment. In this study, we developed a multiscale model to describe the transdermal behavior of active ingredients in the stratum corneum. Molecular dynamics simulations were used to construct lipid bilayers and determine the diffusion coefficients of active ingredients in different regions of these bilayers. These diffusion coefficients were integrated into a multilayer lipid pathway model using finite element simulations. The simulation results were in close agreement with our experimental results for three active ingredients (mandelic acid (MAN), nicotinamide (NIC), and pyruvic acid (PYR)), demonstrating the effectiveness of our multiscale model. This research provides valuable insights for advancing transdermal delivery methods.

The Interactions between Ionic Liquids and Lithium Polysulfides in Lithium-Sulfur Batteries: A Systematic Density Functional Theory Study.

Ionic liquids (ILs) based on hybrid anions have recently garnered attention as beguiling alternative electrolytes for energy storage devices. This attention stems from the potential of these asymmetric anions to reduce the melting point of ILs and impede the crystallization of ILs. Furthermore, they uphold the advantages associated with their more conventional symmetric counterparts. In this study, we employed dispersion-corrected density functional theory (DFT-D) calculations to scrutinize the interplay between two hybrid anions found in ionic liquids [FTFSA]- and [MCTFSA]- and the [C4mpyr]+ cation, as well as in lithium polysulfides in lithium-sulfur batteries. For comparison, we also examined the corresponding ILs containing symmetric anions, [TFSA]- and [FSA]-. We found that the hybrid anion [MCTFSA]- and its ionic liquid exhibited exceptional stability and interaction strength. Additionally, our investigation unveiled a remarkably consistent interaction between ionic liquids (ILs) and anions with lithium polysulfides (and S8) during the transition from octathiocane (S8) to the liquid long-chain Li2Sn (4 ≤ n ≤ 8). This contrasts with the gradual alignment observed between cations and lithium polysulfides during the intermediate state from Li2S4 to the solid short-chain Li2S2 and Li2S1. We thoroughly analyzed the interaction mechanism of ionic liquids composed of different symmetry anions and their interactions with lithium polysulfides.

Reducing Overpotential of Lithium-Oxygen Batteries by Diatomic Metal Catalyst Orbital Matching Strategy.

Aprotic Li-O2 batteries have sparked attention in recent years due to their ultrahigh theoretical energy density. Nevertheless, their practical implementation is impeded by the sluggish reaction kinetics at the cathode. Comprehending the catalytic mechanisms is pivotal to developing efficient cathode catalysts for high-performance Li-O2 batteries. Herein, the intrinsic activity map of Li-O2 batteries is established based on the specific adsorption mode of O2 induced by diatomic catalyst orbital matching and the transfer-acceptance-backdonation mechanism, and the four-step screening strategy based on the intrinsic activity map is proposed. Guided by the strategy, FeNi@NC and FeCu@NC promising durable stability with a low overpotential are screened out from 27 Fe-Metal diatomic catalysts. Our research not only provides insights into the fundamental understanding of the reaction mechanism of Li-O2 batteries but also accelerates the rational design of efficient Li-O2 batteries based on the structure-activity relationship.

Synthetic Leaves Based on Crystalline Olefin-Linked Covalent Organic Frameworks for Efficient CO2 Photoreduction with Water.

We report, for the first time, a new synthetic strategy for the preparation of crystalline two-dimensional olefin-linked covalent organic frameworks (COFs) based on aldol condensation between benzodifurandione and aromatic aldehydes. Olefin-linked COFs can be facilely crystallized through either a pyridine-promoted solvothermal process or a benzoic anhydride-mediated organic flux synthesis. The resultant COF leaf with high in-plane π-conjugation exhibits efficient visible-light-driven photoreduction of carbon dioxide (CO2) with water (H2O) in the absence of any photosensitizer, sacrificial agents, or cocatalysts. The production rate of carbon monoxide (CO) reaches as high as 158.1 µmol g-1 h-1 with near 100% CO selectivity, which is accompanied by the oxidation of H2O to oxygen. Both theoretical and experimental results confirm that the key lies in achieving exceptional photoinduced charge separation and low exciton binding. We anticipate that our findings will facilitate new possibilities for the development of semiconducting COFs with structural diversity and functional variability.

Preparation of Spherical δ-MnO2 Nanoflowers by One-Step Coprecipitation Method as Electrode Material for Supercapacitor.

Spherical δ-MnO2 nanoflower materials were synthesized via a facile one-step coprecipitation method through adjusting the molar ratio of KMnO4 to MnSO4. The influence of the molar ratio of the reactants on the crystal structure, morphology, and electrochemical performances was investigated. At a molar ratio of 3.3 for KMnO4 to MnSO4, the spherical δ-MnO2 nanoflowers composed of nanosheets with the highest specific surface area (228.0 m2 g-1) were obtained as electrode materials. In the conventional three-electrode system using 1 M Na2SO4 as an electrolyte, the specific capacitance of the spherical δ-MnO2 nanoflowers reached 172.3 F g-1 at a current density of 1 A g-1. Moreover, even after 5000 cycles at a current density of 5 A g-1, the GCD curves remained essentially unchanged, and the specific capacitance still retained 86.50% of the maximum value. The kinetics of the electrode reaction were preliminarily studied through the linear potential sweep technique to observe diffusion-controlled contribution toward total capacitance. For the spherical δ-MnO2 nanoflower electrode material, diffusion-controlled contribution accounted for 65.1% at low scan rates and still remained significant at high scan rates (100 mV s-1), indicating excellent utilization efficiency of the bulk phase. The as-fabricated asymmetric supercapacitor HFC-7//MnO2-3.3-ASC presented a prominent specific energy of 16.5 Wh kg-1 at the specific power of 450 W kg-1. Even when the specific power reached 9.0 kW kg-1, the energy density still retained 9.5 Wh kg-1.

Dipole moment regulation for enhancing internal electric field in covalent organic frameworks photocatalysts.

Covalent organic frameworks (COFs) have recently emerged as a kind of promising photocatalytic platform in addressing the growing threat of trace pollutants in aquatic environments. Along this, we propose a strategy of constructing internal electric field (IEF) in COFs through the dipole moment regulation, which intrinsically facilitates the separation and transfer of photogenerated excitons. Two COFs of BTT-TZ-COF and BTT-TB-COF are developed by linking the electron-donor of benzotrithiophene (BTT) block and the electron-acceptor of triazine (TZ) or tribenzene (TB) block, respectively. DFT calculations demonstrate TZ block with larger dipole moment can achieve more efficient IEF due to the stronger electron-attractive force and hence narrower bandgap. Moreover, featuring the highly-order crystalline structure for accelerating photo-excitons transfer and rich porosity for facilitating the adsorption, BTT-TZ-COF exhibited an excellent universal performance of photocatalytic degradations of various dyes. Specifically, a superior photodegradation efficiency of 99% Rhodamine B (RhB) is achieved within 20 min under the simulated sunlight. Therefore, this convenient construction approach of enhanced IEF in COFs through rational regulation of the dipole moment can be a promising way to realize high photocatalytic activity.

Mechanistic Insights into Surfactant-Modulated Electrode-Electrolyte Interface for Steering H2O2 Electrosynthesis.

Electrocatalytic reactions taking place at the electrified electrode-electrolyte interface involve processes of proton-coupled electron transfer. Interfacial protons are delivered to the electrode surface via a H2O-dominated hydrogen-bond network. Less efforts are made to regulate the interfacial proton transfer from the perspective of interfacial hydrogen-bond network. Here, we present quaternary ammonium salt cationic surfactants as electrolyte additives for enhancing the H2O2 selectivity of the oxygen reduction reaction (ORR). Through in situ vibrational spectroscopy and molecular dynamics calculation, it is revealed that the surfactants are irreversibly adsorbed on the electrode surface in response to a given bias potential range, leading to the weakening of the interfacial hydrogen-bond network. This decreases interfacial proton transfer kinetics, particularly at high bias potentials, thus suppressing the 4-electron ORR pathway and achieving a highly selective 2-electron pathway toward H2O2. These results highlight the opportunity for steering H2O-involved electrochemical reactions via modulating the interfacial hydrogen-bond network.

Engineering the thermal stability of a polyphosphate kinase by ancestral sequence reconstruction to expand the temperature boundary for an industrially applicable ATP regeneration system.

ATP-dependent energy-consuming enzymatic reactions are widely used in cell-free biocatalysis. However, the direct addition of large amounts of expensive ATP can greatly increase cost, and enzymatic production is often difficult to achieve as a result. Although a polyphosphate kinase (PPK)-polyphosphate-based ATP regeneration system has the potential to solve this challenge, the generally poor thermal stability of PPKs limits the widespread use of this method. In this paper, we evaluated the thermal stability of a PPK from Sulfurovum lithotrophicum (SlPPK2). After directed evolution and computation-supported design, we found that SlPPK2 is very recalcitrant and cannot acquire beneficial mutations. Inspired by the usually outstanding stability of ancestral enzymes, we reconstructed the ancestral sequence of the PPK family and used it as a guide to construct three heat-stable variants of SlPPK2, of which the L35F/T144S variant has a half-life of more than 14 h at 60°C. Molecular dynamics simulations were performed on all enzymes to analyze the reasons for the increased thermal stability. The results showed that mutations at these two positions act synergistically from the interior and surface of the protein, leading to a more compact structure. Finally, the robustness of the L35F/T144S variant was verified in the synthesis of nucleotides at high temperature. In practice, the use of this high-temperature ATP regeneration system can effectively avoid byproduct accumulation. Our work extends the temperature boundary of ATP regeneration and has great potential for industrial applications.IMPORTANCEATP regeneration is an important basic applied study in the field of cell-free biocatalysis. Polyphosphate kinase (PPK) is an enzyme tool widely used for energy regeneration during enzymatic reactions. However, the thermal stability of the PPKs reported to date that can efficiently regenerate ATP is usually poor, which greatly limits their application. In this study, the thermal stability of a difficult-to-engineer PPK from Sulfurovum lithotrophicum was improved, guided by an ancestral sequence reconstruction strategy. The optimal variant has a 4.5-fold longer half-life at 60°C than the wild-type enzyme, thus enabling the extension of the temperature boundary for ATP regeneration. The ability of this variant to regenerate ATP was well demonstrated during high-temperature enzymatic production of nucleotides.

Unraveling the Molecular Mechanisms of Alcohol-Mediated Skin Permeation Enhancement: Insights from Molecular Dynamics Simulations.

The application of alcohols as permeation enhancers in pharmaceutical and cosmetic formulations has attracted considerable attention, owing to their skin permeation-enhancing effect. Nonetheless, the elucidation of the fundamental mechanisms underlying the skin permeation-enhancing effect remains elusive. In this study, molecular dynamics (MD) simulations were employed to investigate the effect of 1,2-propanediol (1,2-PDO), 1,2-butanediol (1,2-BDO), and ethanol (EtOH) on the stratum corneum (SC) model membrane. The results showed that the effect of alcohols on the SC model membrane displayed a concentration-dependent nature. The alcohols can interact with SC lipids and exhibit a remarkable ability to selectively extract free fatty acid (FFA) molecules from the SC model membrane and make the SC looser. Meanwhile, 1,2-BDO and EtOH can penetrate into SC lipid bilayers at higher concentrations, leading to the formation of continuous hydrophilic defects in SC. The FFA extraction and the formation of continuous hydrophilic defects induced ceramide (CER) tail chains to become more disordered and fluid and also weakened the hydrogen bonding (H-bonding) network among SC lipids. Both the FFA extraction and the continuous hydrophilic defect formation endowed alcohols with the permeation-enhancing effect. The constrained simulations revealed that the free energy barriers decreased for the permeation of the hydrophilic model molecule (COL) across the SC model membranes containing alcohols, particularly for 1,2-BDO and EtOH. The possible permeation-enhancing mechanisms of alcohols were proposed correspondingly. This work not only provided a deep understanding of the transdermal permeation-enhancing behavior of alcohols at the molecular level but also provided necessary reference information for designing effective transdermal drug delivery systems in applications.

A Cellulose Reinforced Multifunctional Binder for High-Performance Silicon Anodes.

Silicon (Si) has garnered significant interest as a potential anode material for next-generation lithium-ion batteries due to its high theoretical capacity. However, Si anodes suffer from substantial volume expansion during the charge and discharge processes, which severely undermines their cycling stability. To address this issue, developing novel binders has become an effective strategy to suppress the volume expansion of Si anodes. In this study, a multifunctional polymer binder (DCCS) was designed by the cross-linking of dialdehyde cellulose nanocrystal (DACNC) and carboxymethyl chitosan (CMCS), which forms a 3D network structure via Schiff-base bonds. The DCCS binder with abundant chemical and hydroxyl bonds shows strong adhesion between Si nanoparticles and current collectors, thus enhancing the mechanical properties of the electrode. Furthermore, the DACNC also served as the protecting buffer layer to release the inner stress and stabilize the solid electrolyte interface (SEI). At 4 A g-1, the resulting Si@25%DCCS electrode demonstrated a capacity of 1637 mAh g-1 after 500 cycles, with an average capacity fading rate of 0.07% per cycle. Therefore, this multifunctional binder is considered a promising binder for high-performance Si anodes.

The Prediction of Cu(II) Adsorption Capacity of Modified Pomelo Peels Using the PSO-ANN Model.

It is very well known that traditional artificial neural networks (ANNs) are prone to falling into local extremes when optimizing model parameters. Herein, to enhance the prediction performance of Cu(II) adsorption capacity, a particle swarm optimized artificial neural network (PSO-ANN) model was developed. Prior to predicting the Cu(II) adsorption capacity of modified pomelo peels (MPP), experimental data collected by our research group were used to build a consistent database. Then, a PSO-ANN model was established to enhance the model performance by optimizing the ANN's weights and biases. Finally, the performances of the developed ANN and PSO-ANN models were deeply evaluated. The results of this investigation revealed that the proposed hybrid method did increase both the generalization ability and the accuracy of the predicted data of the Cu(II) adsorption capacity of MPPs when compared to the conventional ANN model. This PSO-ANN model thus offers an alternative methodology for optimizing the adsorption capacity prediction of heavy metals using agricultural waste biosorbents.

Prion-like Aggregation of the Heptapeptide GNNQQNY into Amyloid Nanofiber Is Governed by Configuration Entropy.

A major cause of prion infectivity is the early formation of small, fibril-like aggregates consisting of the heptapeptide GNNQQNY. The prion aggregates exhibit a unique stacking mode in which the hydrophobic tyrosine (Y) is exposed outward, forming a bilayer ß-sheet-stacking zipper structure. This stacking mode of the prion peptides, termed "Y-outward" structure for convenience, goes against the common understanding that, for other amyloid-forming peptides, the hydrophobic residues should be hidden within the peptide fibril, referred to as "Y-inward" structure. To explore the extraordinary stacking behaviors of the prion GNNQQNY peptides, two fibril models are constructed in a fashion of "Y-outward" and "Y-inward" stackings and then studied in silico to examine their thermodynamic stabilities and disaggregation pathways. The "Y-inward" structure indeed exhibits stronger thermodynamic stability than the "Y-outward" structure, according to potential energy and stacking energy calculations. To show how the peptide fibrils dissociate, we illustrated two disaggregation pathways. A dihedral-based free energy landscape was then calculated to examine the conformational degrees of freedom of the GNNQQNY chains in the "Y-outward" and "Y-inward" structures. Peptide chains lose more configurational entropy in the "Y-inward" structure than in the "Y-outward" structure, indicating that the prion peptides are prone to aggregate in a fashion of "Y-outward" stacking pattern due to its low conformational constraints. The prion-like aggregation of the GNNQQNY peptides into amyloid fibrils is primarily governed by the configuration entropy.

Solvent Effects on Structure and Screening in Confined Electrolytes.

Using classical density functional theory, we investigate the influence of solvent on the structure and ionic screening of electrolytes under slit confinement and in contact with a reservoir. We consider a symmetric electrolyte with implicit and explicit solvent models and find that spatially resolving solvent molecules is essential for the ion structure at confining walls, excess ion adsorption, and the pressure exerted on the walls. Despite this, we observe only moderate differences in the period of oscillations of the pressure with the slit width and virtually coinciding decay lengths as functions of the scaling variable σ_{ion}/λ_{D}, where σ_{ion} is the ion diameter and λ_{D} the Debye length. Moreover, in the electrostatic-dominated regime, this scaling behavior is practically independent of the relative permittivity and its dependence on the ion concentration. In contrast, the crossover to the hard-core-dominated regime depends sensitively on all three factors.

Feasible bottom-up development of conjugated microporous polymers (CMPs) for boosting the deep removal of sulfur dioxide.

A pain-point for material development is that computer-screened structures are usually difficult to realize in experiments. Herein, considering that linkages are crucial for building functional nanoporous polymers with diverse functionalities, we develop an efficient approach for constructing target-specific conjugated microporous polymers (CMPs) based on screening feasible polymerization pathways. Taking the deep removal of SO2 from a SO2/CO2 mixture as the specific target, we precisely screen the linkages and fabricate different CMPs by manipulating the porosity and hydrophobicity. Based on the optimized Buchwald-Hartwig amination, the obtained CMPs can achieve SO2/CO2 selectivity as high as 113 and a moderate Qst of 30 kJ mol-1 for feasible regeneration. Furthermore, the potential of CMPs for practical SO2/CO2 separation is demonstrated through continued breakthrough tests. The SO2 binding sites are consistent with the screening results and proved by in situ Fourier transform infrared spectroscopy and grand canonical Monte Carlo simulation, providing solid feasibility for synthesis realizability for future boosts of task-specific CMPs.

Construction of Core-Cross-Linked Polymer Micelles with High Biocompatibility and Stability for pH/Reduction Controllable Drug Delivery.

Polymer micelles have been studied extensively in drug delivery systems (DDS), and their stability is well known to directly affect drug delivery. In this article, a series of amphiphilic copolymers LA-PDPAn-PVPm were synthesized to prepare core-cross-linked nanoparticles (CNP) applied to controllable and targeted anticancer drug delivery. The copolymers could self-assemble in aqueous solution and form homogeneous spherical micelles with particle sizes of between 100 and 150 nm. A comparison between un-cross-linked UCNP and CNP showed that the cross-linking of LA could significantly improve the stability and responsive ability of the nanoparticles. From the in vitro-simulated drug release experiments, CNP was found to have great drug blocking ability under normal physiological conditions and could achieve rapid and efficient drug release under acidic/reducing conditions. In addition, cell experiments showed that CNP had superior biocompatibility and could target tumor cells for drug release. In conclusion, a drug carrier based on copolymer LA-PDPA-PVP realized effective controlled drug release due to the cross-linking of LA. The results will provide guidance for the design strategy of polymer micelles for drug carriers.

Assessment of Cu(II) Removal from Aqueous Solutions by Modified Pomelo Peels: Experiments and Modelling.

In this study, low-cost pomelo peel wastes were used as a bio-sorbent to remove copper ions (e.g., Cu(II)) from aqueous solutions. Prior to testing its Cu(II) removal capability, the structural, physical and chemical characteristics of the sorbent were examined by scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller (BET) surface area analysis. The impacts of the initial pH, temperature, contact time and Cu(II) feed concentration on the Cu(II) biosorption using modified pomelo peels were then assessed. Thermodynamic parameters associated to the biosorption clearly demonstrate that this biosorption is thermodynamically feasible, endothermic, spontaneous and entropy driven. Furthermore, adsorption kinetic data were found to fit very well with the pseudo-second order kinetics equation, highlighting that this process is driven by a chemical adsorption. Finally, an artificial neural network with a 4:9:1 structure was then established for describing the Cu(II) adsorption using modified pomelo peels with R2 values close to 0.9999 and to 0.9988 for the training and testing sets, respectively. The results present a big potential use of the as-prepared bio-sorbent for the removal of Cu(II), as well as an efficient green technology for ecological and environmental sustainability.

The effects of adsorbed benzo(a)pyrene on dynamic behavior of polystyrene nanoplastics through phospholipid membrane: A molecular simulation study.

Nanoplastics (NPs) are mainly generated from the decomposition of plastic waste and industrial production, which have attracted much attention due to the potential risk for humans. The ability of NPs to penetrate different biological barriers has been proved, but the understanding of molecular details is very limited, especially for organic pollutant-NP combinations. Here, we investigated the uptake process of polystyrene NPs (PSNPs) combined with benzo(a)pyrene (BAP) molecules by dipalmitoylphosphatidylcholine (DPPC) bilayers by molecular dynamics (MD) simulations. The results showed that the PSNPs can adsorb and accumulate BAP molecules in water phase and then carried BAP molecules to enter DPPC bilayers. At the same time, the adsorbed BAP promoted the penetration of PSNPs into DPPC bilayers effectively by hydrophobic effect. The process of BAP-PSNP combinations penetrating into DPPC bilayers can be summarized into four steps including adhesion on the DPPC bilayer surface, uptake by the DPPC bilayer, BAP molecules detached from the PSNPs, and the PSNPs depolymerized in the bilayer interior. Furthermore, the amount of adsorbed BAP on PSNPs affected the properties of DPPC bilayers directly, especially the fluidity of DPPC bilayers that determine the physiologic function. Obviously, the combined effect of PSNPs and BAP enhanced the cytotoxicity. This work not only presented a vivid transmembrane process of BAP-PSNP combinations and revealed the nature of the effects of adsorbed benzo(a)pyrene on the dynamic behavior of polystyrene nanoplastics through phospholipid membrane, but also provide some necessary information of the potential damage for organic pollutant-nanoplastic combinations on human health at a molecular level.

Regulating π-Conjugation in sp2 -Carbon-Linked Covalent Organic Frameworks for Efficient Metal-Free CO2 Photoreduction with H2 O.

The development of sp2 -carbon-linked covalent organic frameworks (sp2 c-COFs) as artificial photocatalysts for solar-driven conversion of CO2 into chemical feedstock has captured growing attention, but catalytic performance has been significantly limited by their intrinsic organic linkages. Here, a simple, yet efficient approach is reported to improve the CO2 photoreduction on metal-free sp2 c-COFs by rationally regulating their intrinsic π-conjugation. The incorporation of ethynyl groups into conjugated skeletons affords a significant improvement in π-conjugation and facilitates the photogenerated charge separation and transfer, thereby boosting the CO2 photoreduction in a solid-gas mode with only water vapor and CO2 . The resultant CO production rate reaches as high as 382.0 µmol g-1  h-1 , ranking at the top among all additive-free CO2 photoreduction catalysts. The simple modulation approach not only enables to achieve enhanced CO2 reduction performance but also simultaneously gives a rise to extend the understanding of structure-property relationship and offer new possibilities for the development of new π-conjugated COF-based artificial photocatalysts.