In situ construction of NiCo-layered double hydroxide nanobranches with adjustable layer spacing on micro-sized carbon plate for high-performance supercapacitors.

Binary layered double hydroxides (LDHs) are an emerging class of materials for supercapacitors owing to their tunable topological structure and excellent theoretical energy storage capacity. However, aggregation and restacking cause a decrease in the interlayer distance of LDHs, resulting in a considerable drop in real specific capacitance. To address this, large-sized anions are intercalated into the interlayer space. Herein, we constructed 3D top-tangled NiCo-LDH nanobranches in situ on a biomass micro-sized carbon plate (CP). By varying the amount of benzene-1,4-dicarboxylic acid (BDC), we prepared a BDC-intercalated CP/NiCo-LDH composite material with adjustable interlayer spacing. Remarkably, the CP/NiCo-LDH-BDC(0.03) composite exhibited excellent electrochemical properties (1530 F g-1/212.5 mAh/g at 1 A/g). It retained 88.36 % capacity after 5000 charge-discharge cycles. The constructed CP/NiCo-LDH-BDC(0.03)//CP asymmetric supercapacitor showed excellent gravimetric capacitance (123 F g-1/54.7 mAh/g at 1 A/g) and energy density (43.7 Wh kg-1 at 800 W kg-1). Furthermore, two asymmetric capacitors connected in series powered a small lightbulb for 2 min, even in a bent state. These findings show that the fabricated CP and CP/NiCo-LDH-BDC(0.03) electrode materials can be applied in flexible and wearable energy storage systems.

Development and validation of a nomogram for predicting the placement of nasointestinal tubes in critically ill patients based on abdominal radiography: A single-center, retrospective study.

Background: Enteral nutrition administered via the nasointestinal tube (NET) is a prevalent nutritional modality among critically ill patients, and abdominal radiographs hold significant value in accurately ascertaining the precise positioning of the NET subsequent to its placement. Therefore, we propose an innovative approach to construct a clinical prediction model based on NET's configuration within the gastrointestinal tract in abdominal radiography. This model aims to enhance the accuracy of determining the position of NETs after their placement. Methods: Patients admitted to the intensive care unit of Zhejiang Provincial People's Hospital between October 2017 and October 2021 were included to constitute the training cohort for retrospective analysis, and nomogram was constructed. Consecutively enrolled patients admitted to the same hospital from October 2021 to October 2023 were included as the validation cohort. The training cohort underwent a univariate analysis initially, followed by a multivariate logistic regression approach to analyze and identify the most appropriate model. Subsequently, nomogram was generated along with receiver operator characteristic curves, calibration curves, and decision curves for both the training and validation cohorts to evaluate the predictive performance of the model. Results: The training and validation cohorts comprised 574 and 249 patients, respectively, with successful tube placement observed in 60.1 % and 76.3 % of patients, correspondingly. The predictors incorporated in the prediction maps encompass the "C-shape," the height of "inverse C-shape," showing the duodenojejunal flexure, and the location of the head end of the NET. The model demonstrated excellent predictive efficacy, achieving an AUC of 0.883 (95 % CI 0.855-0.911) and good calibration. Furthermore, when applied to the validation cohort, the nomogram exhibited strong discrimination with an AUC of 0.815 (95 % CI 0.750-0.880) and good calibration. Conclusion: The combination of abdominal radiography and NET's configuration within the gastrointestinal tract enables accurate determination of NET placement in critically ill patients.

Toward Integrated Multifunctional Laser-Induced Graphene-Based Skin-Like Flexible Sensor Systems.

The burgeoning demands for health care and human-machine interfaces call for the next generation of multifunctional integrated sensor systems with facile fabrication processes and reliable performances. Laser-induced graphene (LIG) with highly tunable physical and chemical characteristics plays vital roles in developing versatile skin-like flexible or stretchable sensor systems. This Progress Report presents an in-depth overview of the latest advances in LIG-based techniques in the applications of flexible sensors. First, the merits of the LIG technique are highlighted especially as the building blocks for flexible sensors, followed by the description of various fabrication methods of LIG and its variants. Then, the focus is moved to diverse LIG-based flexible sensors, including physical sensors, chemical sensors, and electrophysiological sensors. Mechanisms and advantages of LIG in these scenarios are described in detail. Furthermore, various representative paradigms of integrated LIG-based sensor systems are presented to show the capabilities of LIG technique for multipurpose applications. The signal cross-talk issues are discussed with possible strategies. The LIG technology with versatile functionalities coupled with other fabrication strategies will enable high-performance integrated sensor systems for next-generation skin electronics.

Minimally invasive technique facilitates early extubation after cardiac surgery: a single-center retrospective study.

BACKGROUND: Postoperative time to extubation plays a role in prognosis after heart valve surgery; however, its exact impact has not been clarified. This study compared the postoperative outcomes of minimally invasive surgery and conventional sternotomy, focusing on early extubation and factors influencing prolonged mechanical ventilation. METHODS: Data from 744 patients who underwent heart valve surgery at the Zhejiang Provincial People's Hospital between August 2019 and June 2022 were retrospectively analyzed. The outcomes in patients who underwent conventional median sternotomy (MS) and minimally invasive (MI) video-assisted thoracoscopic surgery were compared using inverse probability of treatment weighting (IPTW) and Kaplan-Meier curves. Clinical data, including surgical data, postoperative cardiac function, postoperative complications, and intensive care monitoring data, were analyzed. RESULTS: After propensity score matching and IPTW, 196 cases of conventional MS were compared with 196 cases of MI video-assisted thoracoscopic surgery. Compared to patients in the conventional MS group, those in the MI video-assisted thoracoscopic surgery group in the matched cohort had a higher early postoperative extubation rate (P < 0.01), reduced incidence of postoperative pleural effusion (P < 0.05), significantly shorter length of stay in the intensive care unit (P < 0.01), shorter overall length of hospital stay (P < 0.01), and lower total cost of hospitalization (P < 0.01). CONCLUSIONS: Successful early tracheal extubation is important for the intensive care management of patients after heart valve surgery. The advantages of MI video-assisted thoracoscopic surgery over conventional MS include significant reductions in the duration of use of mechanical ventilation support, reduced length of intensive care unit stay, reduced total length of hospitalization, and a favorable patient recovery rate.

An Opto-electrophysiology Neural Probe with Photoelectric Artifact-Free for Advanced Single-Neuron Analysis.

Opto-electrophysiology neural probes targeting single-cell levels offer an important avenue for elucidating the intrinsic mechanisms of the nervous system using different physical quantities, representing a significant future direction for brain-computer interface (BCI) devices. However, the highly integrated structure poses significant challenges to fabrication processes and the presence of photoelectric artifacts complicates the extraction and analysis of target signals. Here, we propose a highly miniaturized and integrated opto-electrophysiology neural probe for electrical recording and optical stimulation at the single-cell/subcellular level. The design of a total internal reflection layer addresses the photoelectric artifacts that are more pronounced in single-cell devices compared to conventional implantable BCI devices. Finite element simulations and electrical signal tests demonstrate that the opto-electrophysiology neural probe eliminates the photoelectric artifacts in the time domain, which represents a significant breakthrough for optoelectrical integrated BCI devices. Our proposed opto-electrophysiology neural probe holds substantial potential for promoting the development of in vivo BCI devices and developing advanced therapeutic strategies for neurological disorders.

Multivariate analysis of factors associated with the successful prediction of initial blind placement of a nasointestinal tube in the stomach based on X-ray imaging: a retrospective, single-center study.

BACKGROUND: Patients in the intensive care unit (ICU) are highly susceptible to malnutrition, and while enteral nutrition via nasogastric tube is the preferred method, there is a risk of inadvertent reflux and aspiration. Therefore, clinicians have turned to nasointestinal tubes (NET) for enteral nutrition as an alternative option. But the precise localization of NET presents an ongoing challenge. We proposed an innovative approach to provide a valuable reference for clinicians involved in NET placement. METHOD: Data were obtained retrospectively from the medical records of adult patients with a high risk of aspiration or gastric feeding intolerance who had a NET placed in the ICU of Zhejiang Provincial People's Hospital between October 1, 2017, and October 1, 2023. The collected data were subjected to statistical analysis using SPSS and R software. RESULT: There were 494 patients who met the inclusion and exclusion criteria. The first-pass success rate was 81.4% (n = 402). The success of a patient's initial NET placement was found to be associated with Angle SPC and Distance CP, as determined by univariate analysis (25.6 ± 16.7° vs. 41.9 ± 18.0°, P < 0.001; 40.0 ± 26.2 mm vs. 62.0 ± 31.8 mm, P < 0.001, respectively). By conducting a multivariate regression analysis, we identified a significant association between pyloric types and the success rate of placing NET (OR 29.559, 95%CI 14.084-62.038, P < 0.001). CONCLUSION: Angle SPC, Distance CP, and the type of pylorus are independently associated with successful initial placement of NET. Besides, patients with the outside type of pylorus (OP-type) exhibit a higher rate of initial placement success.

Core-shell structured MgCo2O4@Ni(OH)2 nanorods as electrode materials for high-performance asymmetric supercapacitors.

In the field of energy storage, supercapacitors have received extensive attention in recent years. However, achieving the expected electrochemical performance and energy density of supercapacitors is still a huge challenge. The design and synthesis of binder-free composite electrode with core-shell structure is an effective strategy to improve the electrochemical performance of supercapacitors. In this paper, a heterogeneous core-shell structured and binder-free electrode material MgCo2O4@Ni(OH)2 (MCO@NH) grown on nickel foam (NF) is prepared by a simple hydrothermal and oil bath method. The unique core-shell structure makes the MCO@NH have a large specific surface area, which provides abundant active sites for ion transport and storage, thereby improving the electrochemical performance. The MCO@NH/NF nanocomposite demonstrates a high specific capacitance (Cs) of 1583 F g-1 at 1 A/g. A solid-state asymmetric supercapacitor (ASC) assembled with MCO@NH/NF and active carbon (AC) exhibits excellent energy density (45 Wh kg-1 at 457.5 W kg-1) and outstanding capacitance (89.51 %) and coulombic efficiency (97.8 %) after 12,000 cycles, evidencing its good operation stability and potential practical applications. Therefore, the prepared core-shell MCO@NH/NF electrode can be a promising candidate for energy storage devices.

Cu2S/C@NiMnCe-layered double hydroxide with core-shell rods array structure as the cathode for high performance supercapacitors.

The selection of highly efficient materials and the construction of advantageous structures are essential for realizing high-performance electrode materials. In this paper, electrode material Cu2S/C@NiMnCe-LDH/CF with excellent morphology and high performance has been successfully designed and prepared by simple hydrothermal and calcination techniques. First, ZIF-67 is loaded on the outer layer of Cu2S rods to obtain core-shell structured Cu2S@ZIF-67 rods, whose ZIF-67 MOF shell is carbonized to obtain Cu2S@C rods. Then, NiMnCe-LDH are epitaxially loaded on the outer layer of Cu2S@C to obtain Cu2S/C@NiMnCe-LDH rods. At a current density of 2 mA cm-2, Cu2S/C@NiMnCe-LDH/CF exhibits an area capacitance of 5176.4 mF cm-2. The mass capacitance and the energy density of the Cu2S/C@NiMnCe-LDH/CF//AC asymmetric supercapacitor (ASC) reach 150.82F g-1 at a sweep rate of 0.8 A/g and 53.62 Wh kg-1 at a power density of 639.99 W kg-1, respectively. Meanwhile, after 8000 electrochemical cycles, the specific capacitance of Cu2S/C@NiMnCe-LDH/CF//AC still has a retention rate of 86.32 %, which proves its excellent cycling stability. These results demonstrate a new strategy for the preparation of novel core-shell structured Cu2S/C@NiMnCe-LDH/CF nanocomposite material for electrode materials of energy storage devices with superb performance.

Constructing built-in electric field in oxygen vacancies-enriched Fe3O4-FeSe2 heterojunctions supported on reduced graphene oxide for efficient overall water splitting.

Combining interfacial oxygen vacancy engineering with a built-in electric field (BEF) technique is an efficient way to build efficient and practical electrocatalytic water-splitting catalysts. In this study, a Fe3O4-FeSe2 heterojunction catalyst with oxygen vacancies supported on reduced graphene oxide (rGO) was designed and successfully fabricated using a simple two-step hydrothermal method. Owing to the different Fermi levels of Fe3O4 and FeSe2, a BEF was generated at the interface, which enhanced the separation of negative and positive charges, thus optimizing the adsorption of hydrogen/oxygen intermediates on the heterostructures and improving the activity of the catalyst. Experimental results show that Fe3O4-FeSe2/rGO/NF exhibits excellent hydrogen and oxygen evolution performances, with low overpotentials of 234/300 mV at 100 mA⋅cm-2. A water electrolyzer assembled with Fe3O4-FeSe2/rGO/NF as both the anode and cathode requires only a small potential of 1.78 V to reach a current density of 100 mA⋅cm-1. This study provides an innovative approach for constructing a catalyst with excellent electrocatalytic performance for overall water splitting.

Magnesium alleviates growth inhibition under low potassium by enhancing photosynthesis and carbon-nitrogen metabolism in apple plants.

Potassium (K) and magnesium (Mg) play analogous roles in regulating plant photosynthesis and carbon and nitrogen (C-N) metabolism. Based on this consensus, we hypothesize that appropriate Mg supplementation may alleviate growth inhibition under low K stress. We monitored morphological, physiological, and molecular changes in G935 apple plants under different K (0.1 and 6 mmol L-1) and Mg supply (3 and 6 mmol L-1) conditions. Low K stress caused changes in root and leaf structure, inhibited photosynthesis, and limited the root growth of the apple rootstock. Further study on Mg supplementation showed that it could promote the uptake of K+ and NO3- by upregulating the expression of K+ transporter proteins such as Arabidopsis K+ transporter 1 (MdAKT1), high-affinity K+ transporter 1 (MdHKT1), and potassium transporter 5 (MdPT5) and nitrate transporters such as nitrate transporter 1.1/1.2/2.1/2.4 (MdNRT 1.1/1.2/2.1/2.4). Mg promoted the translocation of 15N from roots to leaves and enhanced photosynthetic N utilization efficiency (PNUE) by increasing the proportion of photosynthetic N and alleviating photosynthetic restrictions. Furthermore, Mg supplementation improved the synthesis of photosynthates by enhancing the activities of sugar-metabolizing enzymes (Rubisco, SS, SPS, S6PDH). Mg also facilitated the transport of sucrose and sorbitol from leaves to roots by upregulating the expression of sucrose transporter 1.1/1.2/4.1/4.2 (MdSUT 1.1/1.2/4.1/4.2) and sorbitol transporter 1.1/1.2 (MdSOT 1.1/1.2). Overall, Mg effectively alleviated growth inhibition in apple rootstock plants under low K stress by facilitating the uptake of N and K uptake, optimizing nitrogen partitioning, enhancing nitrogen use efficiency (NUE) and PNUE, and promoting the photosynthate synthesis and translocation.

Protonated amine and pyrene co-functionalized sodium alginate templated on reduced graphene oxide for highly efficient removal of formaldehyde and acid pollutants.

Indoor formaldehyde pollution can cause inestimable harm to human health and even cancers, thus studies on the removal of formaldehyde attract extensive attentions. In this paper, an environmentally friendly and low-cost biomass material, sodium alginate (SA) was utilized to prepare pyrene functionalized amido-amine-alginic acid (AmAA-Py) by acidification and two-step amidation, which is subsequently self-assembled on reduced graphene oxide (rGO) by π-π stacking interaction, and the final composites were acidified to afford a highly porous composite material for chemical removal of formaldehyde. The formaldehyde chemical removal performance of composite is evaluated at different conditions and find that 1.0 g of acidified alginate derivatives and graphene composites (HCl·AmAA-Py-rGO) can adsorb 69.2 mg of HCHO. Simultaneously, amino groups in amido-amine derivative of acidified sodium alginate (AmAA) can react with acidic pollutants such as H2S and HCl via forming ionic bonding without generating any other by-products, which enables efficient and environment-friendly removal of acidic pollutants. The subtle design of the highly porous composite material utilizing low-cost SA and rGO with large specific surface area opens up a new methodology for fabricating highly porous materials for efficient removal of formaldehyde and other indoor hazardous pollutants.

Targeting SLC22A5 fosters mitophagy inhibition-mediated macrophage immunity against septic acute kidney injury upon CD47-SIRPα axis blockade.

Efferocytosis of apoptotic neutrophils (PMNs) by macrophages is helpful for inflammation resolution and injury repair, but the role of efferocytosis in intrinsic nature of macrophages during septic acute kidney injury (AKI) remains unknown. Here we report that CD47 and signal regulatory protein alpha (SIRPα)-the anti-efferocytotic 'don't eat me' signals-are highly expressed in peripheral blood mononuclear cells (PBMCs) from patients with septic AKI and kidney samples from mice with polymicrobial sepsis and endotoxin shock. Conditional knockout (CKO) of SIRPA in macrophages ameliorates AKI and systemic inflammation response in septic mice, accompanied by an escalation in mitophagy inhibition of macrophages. Ablation of SIRPA transcriptionally downregulates solute carrier family 22 member 5 (SLC22A5) in the lipopolysaccharide (LPS)-stimulated macrophages that efferocytose apoptotic neutrophils (PMNs). Targeting SLC22A5 renders mitophagy inhibition of macrophages in response to LPS stimuli, improves survival and deters development of septic AKI. Our study supports further clinical investigation of CD47-SIRPα signalling in sepsis and proposes that SLC22A5 might be a promising immunotherapeutic target for septic AKI.

Nitrogen-potassium balance improves leaf photosynthetic capacity by regulating leaf nitrogen allocation in apple.

Nitrogen (N) and potassium (K) are two important mineral nutrients in regulating leaf photosynthesis. However, the influence of N and K interaction on photosynthesis is still not fully understood. Using a hydroponics approach, we studied the effects of different N and K conditions on the physiological characteristics, N allocation and photosynthetic capacity of apple rootstock M9T337. The results showed that high N and low K conditions significantly reduced K content in roots and leaves, resulting in N/K imbalance, and allocated more N in leaves to non-photosynthetic N. Low K conditions increased biochemical limitation (BL), mesophyll limitation (MCL), and stomatal limitation (SL). By setting different N supplies, lowering N levels under low K conditions increased the proportion of water-soluble protein N (Nw) and sodium dodecyl sulfate-soluble proteins (Ns) by balancing N/K and increased the proportion of carboxylation N and electron transfer N. This increased the maximum carboxylation rate and mesophyll conductance, which reduced MCL and BL and alleviated the low K limitation of photosynthesis in apple rootstocks. In general, our results provide new insights into the regulation of photosynthetic capacity by N/K balance, which is conducive to the coordinated supply of N and K nutrients.

Composite of CoS1.97 nanoparticles decorated CuS hollow cubes with rGO as thin film electrode for high-performance all solid flexible supercapacitors.

Stretchable flexible thin-film electrodes are extensively explored for developing new wearable energy storage devices. However, traditional carbon-based materials used in such independent electrodes have limited practical applications owing to their low energy storage capacity and energy density. To address this, a unique structure and remarkable mechanical stability thin-film flexible positive electrode comprising CoS1.97 nanoparticles decorated hollow CuS cubes and reduced graphene oxide (rGO), hereinafter referred to as CCSrGO, is prepared. Transition metal sulfide CoS1.97 and CuS shows high energy density owing to the synergistic effects of its active components. The electrode can simultaneously meet the high-energy density and safety requirements of new wearable energy storage devices. The electrode has excellent electrochemical performance (1380 F/g at 1 A/g) and ideal capacitance retention (93.8 % after 10,000 cycles) owing to its unique three-dimensional hollow structure and polymetallic synergies between copper and cobalt elements, which are attributed to their different energy storage mechanisms. Furthermore, a flexible asymmetric supercapacitor (FASC) was constructed using CCSrGO as the positive electrode and rGO as the negative electrode (CCSrGO//rGO), which delivers an energy density of 100 Wh kg-1 and a corresponding power density of 2663 W kg-1 within a voltage window of 0-1.5 V. The resulting FASC can power a light-emitting diode (LED) at different bending and twisting angles, exerting little effect on the capacitance. Therefore, the prepared CCSrGO//rGO FASC devices show great application prospects in energy storage.

5G NB-IoT System Integrated with High-Performance Fiber Sensor Inspired by Cirrus and Spider Structures.

Real-time telemedicine detection can solve the problem of the shortage of public medical resources caused by the coming aging society. However, the development of such an integrated monitoring system is hampered by the need for high-performance sensors and the strict-requirement of long-distance signal transmission and reproduction. Here, a bionic crack-spring fiber sensor (CSFS) inspired by spider leg and cirrus whiskers for stretchable and weavable electronics is reported. Trans-scale conductive percolation networks of multilayer graphene around the surface of outer spring-like Polyethylene terephthalate (PET) fibers and printing Ag enable a high sensitivity of 28475.6 and broad sensing range over 250%. The electromechanical changes in different stretching stages are simulated by Comsol to explain the response mechanism. The CSFS is incorporated into the fabric and realized the human-machine interactions (HMIs) for robot control. Furthermore, the 5G Narrowband Internet of Things (NB-IoT) system is developed for human healthcare data collection, transmission, and reproduction together with the integration of the CSFS, illustrating the huge potential of the approach in human-machine communication interfaces and intelligent telemedicine rehabilitation and diagnosis monitoring.

In situ self-referenced intracellular two-electrode system for enhanced accuracy in single-cell analysis.

Since the emergence of single-cell electroanalysis, the two-electrode system has become the predominant electrochemical system for real-time behavioral analysis of single-cell and multicellular populations. However, due to the transmembrane placement of the two electrodes, cellular activities can be interrupted by the transmembrane potentials, and the test results are susceptible to influences from factors such as intracellular solution, membrane, and bulk solution. These limitations impede the advancement of single-cell analysis. Here, we propose a highly miniaturized and integrated in situ self-referenced intracellular two-electrode system (IS-SRITES), wherein both the working and reference electrodes are positioned inside the cell. Additionally, we demonstrated the stability (0.28 mV/h) of the solid-contact in situ Ag/AgCl reference electrode and the ability of the system to conduct standard electrochemical testing in a wide pH range (pH 6.0-8.0). Cell experiments confirmed the non-destructive performance of the electrode system towards cells and its capacity for real-time monitoring of intra- and extracellular pH values. Moreover, through equivalent circuits, finite element simulations, and drug delivery experiments, we illustrated that the IS-SRITES can yield more accurate test results and exhibit enhanced resistance to interference from the extracellular environment. Our proposed system holds the potential to enable the precise detection of intracellular substances and optimize the existing model of the electrode system for intracellular signal detection, thereby spearheading advancements in single-cell analysis.

Neuromorphic electro-stimulation based on atomically thin semiconductor for damage-free inflammation inhibition.

Inflammation, caused by accumulation of inflammatory cytokines from immunocytes, is prevalent in a variety of diseases. Electro-stimulation emerges as a promising candidate for inflammatory inhibition. Although electroacupuncture is free from surgical injury, it faces the challenges of imprecise pathways/current spikes, and insufficiently defined mechanisms, while non-optimal pathway or spike would require high current amplitude, which makes electro-stimulation usually accompanied by damage and complications. Here, we propose a neuromorphic electro-stimulation based on atomically thin semiconductor floating-gate memory interdigital circuit. Direct stimulation is achieved by wrapping sympathetic chain with flexible electrodes and floating-gate memory are programmable to fire bionic spikes, thus minimizing nerve damage. A substantial decrease (73.5%) in inflammatory cytokine IL-6 occurred, which also enabled better efficacy than commercial stimulator at record-low currents with damage-free to sympathetic neurons. Additionally, using transgenic mice, the anti-inflammation effect is determined by ß2 adrenergic signaling from myeloid cell lineage (monocytes/macrophages and granulocytes).

MOF-based/derived catalysts for electrochemical overall water splitting.

Water-splitting electrocatalysis has gained increasing attention as a promising strategy for developing renewable energy in recent years, but its high overpotential caused by the unfavorable thermodynamics has limited its widespread implementation. Therefore, there is an urgent need to design catalytic materials with outstanding activity and stability that can overcome the high overpotential and thus improve the electrocatalytic efficiency. Metal-organic frameworks (MOFs) based and/or derived materials are widely used as water-splitting catalysts because of their easily controlled structures, abundant heterointerfaces and increased specific surface area. Herein, some recent research findings on MOFs-based/derived materials are summarized and presented. First, the mechanism and evaluation parameters of electrochemical water splitting are described. Subsequently, advanced modulation strategies for designing MOFs-based/derived catalysts and their catalytic performance toward water splitting are summarized. In particular, the correlation between chemical composition/structural functionalization and catalytic performance is highlighted. Finally, the future outlook and challenges for MOFs materials are also addressed.

Photochromic biomaterials: Synthesis and fluorescence properties of spiroxanthenes-grafted alginate derivatives.

Herein, we reported a general and green synthetic strategy for photochromic functional alginate derivatives grafting with isoindolinone spiroxanthenes. Under mild condition, diverse 2-aminoalkyl isoindolinone spiroxanthene derivatives have been prepared from organic photochromic isobenzofuranone spiroxanthenes (including rhodamine B, rhodamine 6G and fluorescein), and grafted on alginate chains through amidation reaction using diamine as a linkage with water as a green solvent at room temperature. The photochromic properties of the fluorophores-modified polymers and the effect of pH value have been explored. Under acid conditions, the spiroisoindolinone rings of alginate derivatives are opened resulting in showing absorption bands and fluorescence with orange to green emission, while the alginate derivatives turned to colourless under basic conditions which is reversibly. In addition to biodegradability and biocompatibility, the polymers exhibit good film-forming properties simultaneously. The films and fibers produced from the alginate derivatives also project good fluorescence properties.

Construction of Binder-Free, Self-Supported, Hetero-Core-Shell Honeycomb Structured CuCo2 O4 @Ni0.5 Co0.5 (OH)2 with Abundant Mesopores and High Conductivity for High-Performance Energy Storage.

Clever and rational design of structural hierarchy, along with precise component adjustment, holds profound significance for the construction of high-performance supercapacitor electrode materials. In this study, a binder-free self-supported CCO@N0.5 C0.5 OH/NF cathode material is constructed with hierarchical hetero-core-shell honeycomb nanostructure by first growing CuCo2 O4 (CCO) nanopin arrays uniformly on highly conductive nickel foam (NF) substrate, and then anchoring Ni0.5 Co0.5 (OH)2 (N0.5 C0.5 OH) bimetallic hydroxide nanosheet arrays on the CCO nanopin arrays by adjusting the molar ratio of Ni(OH)2 and Co(OH)2 . The constructed CCO@N0.5 C0.5 OH/NF electrode material showcases a wealth of multivalent metal ions and mesopores, along with good electrical conductivity, excellent electrochemical reaction rates, and robust long-term performance (capacitance retention rate of 87.2%). The CCO@N0.5 C0.5 OH/NF electrode, benefiting from the hierarchical structure of the material and the exceptional synergy between multiple components, demonstrates an excellent specific capacitance (2553.6 F g-1 at 1 A g-1 ). Furthermore, the assembled asymmetric CCO@N0.5 C0.5 OH/NF//AC/NF supercapacitor demonstrates a high energy density (70.1 Wh kg-1 at 850 W kg-1 ), and maintains robust capacitance cycling stability performance (83.7%) after undergoing 10 000 successive charges and discharges. It is noteworthy that the assembled supercapacitor exhibits an operating voltage (1.7 V) that is well above the theoretical value (1.5 V).