Destruction of perfluorooctane sulfonic acid (PFOS) in gas sparging incorporated UV-indole reductive treatment system - Benefits and challenges.

Ultraviolet (UV) reductive treatment systems that generate hydrated electrons (eaq-) have emerged as a promising technology for the destruction of chemically inert per- and polyfluoroalkyl substances (PFAS). Here, we report on the evaluation of an indole derivative-based UV reductive treatment system that utilizes the amphipathic properties of PFAS at the gas-water interface (via nitrogen (N2) sparging) for more energy-efficient destruction of perfluorooctane sulfonic acid (PFOS). Results from this work illustrated that N2 sparging within UV systems can enhance the degradation and defluorination of PFOS compared to non-sparged conditions, but their overall treatment efficiency is low to industry standard. The inadequate system performance is likely originated from the insufficient accumulation of electron sources at the gas-water interface and their low water solubility level. In addition, carbonate species, which are ubiquitous in natural water and commonly applied as buffers in UV reductive treatment systems, negatively impact PFOS defluorination when indole is the electron source. The species-specific quenching imposed by carbonate species (e.g., HCO3- > H2CO3*) indicates that naturally occurring constituents and varying reactor conditions can substantially influence the remediation of PFOS. Other notable findings in this work include: 1) gramine, a cationic indole derivative, was able to remove > 99 % PFOS mass via electrostatic interaction within 0.5 h of reaction, signifying the electron source's structural property importance in UV reductive treatment systems, and 2) energy consumption calculations showed indole species are less energy-efficient as electron sources for PFOS destruction comparing to sulfite-iodide, but performance tradeoffs exist in both systems. The results of this work revealed both the benefits and challenges of utilizing N2 sparging and indole derivatives in UV-PFAS reductive treatment processes and provided critical information needed to improve the prediction and design of similar PFAS destruction technologies.

Thermal transformations of perfluorooctanoic acid (PFOA): Mechanisms, volatile organofluorine emissions, and implications to thermal regeneration of granular activated carbon.

Thermal treatment is effective for the removal of perfluorooctanoic acid (PFOA). However, how temperatures, heating methods, and granular activated carbon (GAC) influence pyrolysis of PFOA, and emission risks are not fully understood. We studied thermal behaviors of PFOA at various conditions and analyzed gaseous products using real-time detection technologies and gas chromatography-mass spectrometry (GC-MS). The thermal decomposition of PFOA is surface-mediated. On the surface of quartz, PFOA decomposed into perfluoro-1-heptene and perfluoro-2-heptene, while on GAC, it tended to decompose into 1 H-perfluoroheptane (C7HF15). Neutral PFOA started evaporating around 100 â„ƒ without decomposition in ramp heating. During pyrolysis, when PFOA was pre-adsorbed onto GAC, it was mineralized into SiF4 and produced more than 45 volatile organic fluorine (VOF) byproducts, including perfluorocarbons (PFCs) and hydrofluorocarbons (HFCs). The VOF products were longer-chain (hydro)fluorocarbons (C4-C7) at low temperatures (< 500 â„ƒ) and became shorter-chain (C1-C4) at higher temperatures (> 600 â„ƒ). PFOA transformations include decarboxylation, VOF desorption, further organofluorine decomposition and mineralization in ramp heating of PFOA-laden GAC. Decarboxylation initiates at 120 â„ƒ, but other processes require higher temperatures (>200 â„ƒ). These results offer valuable information regarding the thermal regeneration of PFAS-laden GAC and further VOF control with the afterburner or thermal oxidizer.

Oxidative Transformation of Nafion-Related Fluorinated Ether Sulfonates: Comparison with Legacy PFAS Structures and Opportunities of Acidic Persulfate Digestion for PFAS Precursor Analysis.

The total oxidizable precursor (TOP) assay has been extensively used for detecting PFAS pollutants that do not have analytical standards. It uses hydroxyl radicals (HO•) from the heat activation of persulfate under alkaline pH to convert H-containing precursors to perfluoroalkyl carboxylates (PFCAs) for target analysis. However, the current TOP assay oxidation method does not apply to emerging PFAS because (i) many structures do not contain C-H bonds for HO• attack and (ii) the transformation products are not necessarily PFCAs. In this study, we explored the use of classic acidic persulfate digestion, which generates sulfate radicals (SO4-•), to extend the capability of the TOP assay. We examined the oxidation of Nafion-related ether sulfonates that contain C-H or -COO-, characterized the oxidation products, and quantified the F atom balance. The SO4-• oxidation greatly expanded the scope of oxidizable precursors. The transformation was initiated by decarboxylation, followed by various spontaneous steps, such as HF elimination and ester hydrolysis. We further compared the oxidation of legacy fluorotelomers using SO4-• versus HO•. The results suggest novel product distribution patterns, depending on the functional group and oxidant dose. The general trends and strategies were also validated by analyzing a mixture of 100000- or 10000-fold diluted aqueous film-forming foam (containing various fluorotelomer surfactants and organics) and a spiked Nafion precursor. Therefore, (1) the combined use of SO4-• and HO• oxidation, (2) the expanded list of standard chemicals, and (3) further elucidation of SO4-• oxidation mechanisms will provide more critical information to probe emerging PFAS pollutants.

Electrostatic Field in Contact-Electro-Catalysis Driven C-F Bond Cleavage of Perfluoroalkyl Substances.

Perfluoroalkyl substances (PFASs) are persistent and toxic to human health. It is demanding for high-efficient and green technologies to remove PFASs from water. In this study, a novel PFAS treatment technology was developed, utilizing polytetrafluoroethylene (PTFE) particles (1-5 µm) as the catalyst and a low frequency ultrasound (US, 40 kHz, 0.3 W/cm2) for activation. Remarkably, this system can induce near-complete defluorination for different structured PFASs. The underlying mechanism relies on contact electrification between PTFE and water, which induces cumulative electrons on PTFE surface, and creates a high surface voltage (tens of volts). Such high surface voltage can generate abundant reactive oxygen species (ROS, i.e., O2⋅-, HO⋅, etc.) and a strong interfacial electrostatic field (IEF of 109~1010 V/m). Consequently, the strong IEF significantly activates PFAS molecules and reduces the energy barrier of O2⋅- nucleophilic reaction. Simultaneously, the co-existence of surface electrons (PTFE*(e-)) and HO⋅ enables synergetic reduction and oxidation of PFAS and its intermediates, leading to enhanced and thorough defluorination. The US/PTFE method shows compelling advantages of low energy consumption, zero chemical input, and few harmful intermediates. It offers a new and promising solution for effectively treating the PFAS-contaminated drinking water.

Developing a Predictive Model for Minimal or Mild Endometriosis as a Clinical Screening Tool in Infertile Women: Uterosacral Tenderness as a Key Predictor.

STUDY OBJECTIVE: To develop a noninvasive predictive model based on patients with infertility for identifying minimal or mild endometriosis. DESIGN: A retrospective cohort study. SETTING: This study was conducted at a tertiary referral center. PATIENTS: A total of consecutive 1365 patients with infertility who underwent laparoscopy between January 2013 and August 2020 were divided into a training set (n = 910) for developing the predictive model and a validation set (n = 455) to confirm the model's prediction efficiency. The patients were randomly assigned in a 2:1 ratio. INTERVENTIONS: Sensitivities, specificities, area under the curve, the Hosmer-Lemeshow goodness of fit test, Net Reclassification Improvement index, and Integrated Discrimination Improvement index were evaluated in the training set to select the optimum model. In the validation set, the model's discriminations, calibrations, and clinical use were tested for validation. MEASUREMENTS AND MAIN RESULTS: In the training set, there were 587 patients with minimal or mild endometriosis and 323 patients without endometriosis. The combination of clinical parameters in the model was evaluated for both statistical and clinical significance. The best-performing model ultimately included body mass index, dysmenorrhea, dyspareunia, uterosacral tenderness, and serum cancer antigen 125 (CA-125). The nomogram based on this model demonstrated sensitivities of 87.7% and 93.3%, specificities of 68.6% and 66.4%, and area under the curve of 0.84 (95% confidence interval 0.81-0.87) and 0.85 (95% confidence interval 0.80-0.89) for the training and validation sets, respectively. Calibration curves and decision curve analyses also indicated that the model had good calibration and clinical value. Uterosacral tenderness emerged as the most valuable predictor. CONCLUSION: This study successfully developed a predictive model with high accuracy in identifying infertile women with minimal or mild endometriosis based on clinical characteristics, signs, and cost-effective blood tests. This model would assist clinicians in screening infertile women for minimal or mild endometriosis, thereby facilitating early diagnosis and treatment.

New Indole Derivative Heterogeneous System for the Synergistic Reduction and Oxidation of Various Per-/Polyfluoroalkyl Substances: Insights into the Degradation/Defluorination Mechanism.

The hydrated electron (eaq-) system is typically suitable for degrading perfluoroalkyl substances (PFASs). To enhance eaq- utilization, we synthesized a new indole compound (DIHA) that forms stable nanospheres (100-200 nm) in water via a supramolecular assembly. Herein, the DIHA nanoemulsion system exhibits high degradation efficiencies toward a broad category of PFASs, regardless of the headgroup, chain length, and branching structure, under UV (254 nm) irradiation. The strong adsorption of PFAS on the DIHA surface ensures its effective degradation/defluorination. Quenching experiments further demonstrated that the reaction took place on the surface of DIHA nanospheres. This specific heterogeneous surface reaction unveiled novel PFAS degradation and defluorination mechanisms that differ from previously reported eaq- systems. First, the photogenerated surface electrons nonselectively attacked multiple C-F bonds of the -CF2- chain. This plays a dominant degrading/defluorinating role in the DIHA system. Second, abundant hydroxyl radicals (•OH) were also produced, leading to synergistic reduction (by surface electron) and oxidation (by surface •OH) in a single system. This facilitates faster and deeper defluorination of different structured PFASs through multiple pathways. The new mechanism inspires the design of innovative organo-heterogeneous eaq- systems possessing synergistic reduction and oxidation functions, thereby making them potentially effective for treating PFAS-contaminated water.

Enhancing Aqueous Chlorate Reduction Using Vanadium Redox Cycles and pH Control.

Chlorate (ClO3-) is a toxic oxyanion pollutant from industrial wastes, agricultural applications, drinking water disinfection, and wastewater treatment. Catalytic reduction of ClO3- using palladium (Pd) nanoparticle catalysts exhibited sluggish kinetics. This work demonstrates an 18-fold activity enhancement by integrating earth-abundant vanadium (V) into the common Pd/C catalyst. X-ray photoelectron spectroscopy and electrochemical studies indicated that VV and VIV precursors are reduced to VIII in the aqueous phase (rather than immobilized on the carbon support) by Pd-activated H2. The VIII/IV redox cycle is the predominant mechanism for the ClO3- reduction. Further reduction of chlorine intermediates to Cl- could proceed via VIII/IV and VIV/V redox cycles or direct reduction by Pd/C. To capture the potentially toxic V metal from the treated solution, we adjusted the pH from 3 to 8 after the reaction, which completely immobilized VIII onto Pd/C for catalyst recycling. The enhanced performance of reductive catalysis using a Group 5 metal adds to the diversity of transition metals (e.g., Cr, Mo, Re, Fe, and Ru in Groups 6-8) for water pollutant treatment via various unique mechanisms.

Aerobic Biotransformation and Defluorination of Fluoroalkylether Substances (ether PFAS): Substrate Specificity, Pathways, and Applications.

Fluoroalkylether substances (ether PFAS) constitute a large group of emerging PFAS with uncertain environmental fate. Among them, GenX is the well-known alternative to perfluorooctanoic acid and one of the six proposed PFAS to be regulated by the U.S. Environmental Protection Agency. This study investigated the structure-biodegradability relationship for 12 different ether PFAS with a carboxylic acid headgroup in activated sludge communities. Only polyfluorinated ethers with at least one -CH2- moiety adjacent to or a C=C bond in the proximity of the ether bond underwent active biotransformation via oxidative and hydrolytic O-dealkylation. The bioreactions at ether bonds led to the formation of unstable fluoroalcohol intermediates subject to spontaneous defluorination. We further demonstrated that this aerobic biotransformation/defluorination could complement the advanced reduction process in a treatment train system to achieve more cost-effective treatment for GenX and other recalcitrant perfluorinated ether PFAS. These findings provide essential insights into the environmental fate of ether PFAS, the design of biodegradable alternative PFAS, and the development of cost-effective ether PFAS treatment strategies.

Amine-Functionalized A-Center Sphalerite for Selective and Efficient Destruction of Perfluorooctanoic Acid.

Perfluorochemicals (PFCs), especially perfluorooctanoic acid (PFOA), have contaminated the ground and surface waters throughout the world. Efficient removal of PFCs from contaminated waters has been a major challenge. This study developed a novel UV-based reaction system to achieve fast PFOA adsorption and decomposition without addition of sacrificial chemicals by using synthetic photocatalyst sphalerite (ZnS-[N]) with sufficient surface amination and defects. The obtained ZnS-[N] has the capability of both reduction and oxidation due to the suitable band gap and photo-generated hole-trapping properties created by surface defects. The cooperated organic amine functional groups on the surface of ZnS-[N] play a crucial role in the selective adsorption of PFOA, which guarantee the efficient destruction of PFOA subsequently, and 1 µg L-1 PFOA could be degraded to <70 ng L-1 after 3 h in the presence of 0.75 g L-1 ZnS-[N] under 500 W UV irradiation. In this process, the photogenerated electrons (reduction) and holes (oxidation) on the ZnS-[N] surface work in a synergistic manner to achieve complete defluorination of PFOA. This study not only provides promising green technology for PFC-pollution remediation but also highlights the significance of developing a target system capable of both reduction and oxidation for PFC degradation.

Prednisone vs Placebo and Live Birth in Patients With Recurrent Implantation Failure Undergoing In Vitro Fertilization: A Randomized Clinical Trial.

Importance: Implantation failure remains a critical barrier to in vitro fertilization. Prednisone, as an immune-regulatory agent, is widely used to improve the probability of implantation and pregnancy, although the evidence for efficacy is inadequate. Objective: To determine the efficacy of 10 mg of prednisone compared with placebo on live birth among women with recurrent implantation failure. Design, Setting, and Participants: A double-blind, placebo-controlled, randomized clinical trial conducted at 8 fertility centers in China. Eligible women who had a history of 2 or more unsuccessful embryo transfer cycles, were younger than 38 years when oocytes were retrieved, and were planning to undergo frozen-thawed embryo transfer with the availability of good-quality embryos were enrolled from November 2018 to August 2020 (final follow-up August 2021). Interventions: Participants were randomized (1:1) to receive oral pills containing either 10 mg of prednisone (n = 357) or matching placebo (n = 358) once daily, from the day at which they started endometrial preparation for frozen-thawed embryo transfer through early pregnancy. Main Outcomes and Measures: The primary outcome was live birth, defined as the delivery of any number of neonates born at 28 or more weeks' gestation with signs of life. Results: Among 715 women randomized (mean age, 32 years), 714 (99.9%) had data available on live birth outcomes and were included in the primary analysis. Live birth occurred among 37.8% of women (135 of 357) in the prednisone group vs 38.8% of women (139 of 358) in the placebo group (absolute difference, -1.0% [95% CI, -8.1% to 6.1%]; relative ratio [RR], 0.97 [95% CI, 0.81 to 1.17]; P = .78). The rates of biochemical pregnancy loss were 17.3% in the prednisone group and 9.9% in the placebo group (absolute difference, 7.5% [95% CI, 0.6% to 14.3%]; RR, 1.75 [95% CI, 1.03 to 2.99]; P = .04). Of those in the prednisone group, preterm delivery occurred among 11.8% and of those in the placebo group, 5.5% of pregnancies (absolute difference, 6.3% [95% CI, 0.2% to 12.4%]; RR, 2.14 [95% CI, 1.00 to 4.58]; P = .04). There were no statistically significant between-group differences in the rates of biochemical pregnancy, clinical pregnancy, implantation, neonatal complications, congenital anomalies, other adverse events, or mean birthweights. Conclusions and Relevance: Among patients with recurrent implantation failure, treatment with prednisone did not improve live birth rate compared with placebo. Data suggested that the use of prednisone may increase the risk of preterm delivery and biochemical pregnancy loss. Our results challenge the value of prednisone use in clinical practice for the treatment of recurrent implantation failure. Trial Registration: Chinese Clinical Trial Registry Identifier: ChiCTR1800018783.

Preparation and Synergy of Supported Ru0 and Pd0 for Rapid Chlorate Reduction at pH 7.

Chlorate (ClO3-) is a common water pollutant due to its gigantic scale of production, wide applications in agriculture and industry, and formation as a toxic byproduct in various water treatment processes. This work reports on the facile preparation, mechanistic elucidation, and kinetic evaluation of a bimetallic catalyst for highly active ClO3- reduction into Cl-. Under 1 atm H2 and 20 °C, PdII and RuIII were sequentially adsorbed and reduced on a powdered activated carbon support, affording Ru0-Pd0/C from scratch within only 20 min. The Pd0 particles significantly accelerated the reductive immobilization of RuIII as >55% dispersed Ru0 outside Pd0. At pH 7, Ru-Pd/C shows a substantially higher activity of ClO3- reduction (initial turnover frequency >13.9 min-1 on Ru0; rate constant at 4050 L h-1 gmetal-1) than reported catalysts (e.g., Rh/C, Ir/C, Mo-Pd/C) and the monometallic Ru/C. In particular, Ru-Pd/C accomplished the reduction of concentrated 100 mM ClO3- (turnover number > 11,970), whereas Ru/C was quickly deactivated. In the bimetallic synergy, Ru0 rapidly reduces ClO3- while Pd0 scavenges the Ru-passivating ClO2- and restores Ru0. This work demonstrates a simple and effective design for heterogeneous catalysts tailored for emerging water treatment needs.

Accelerating Catalytic Oxyanion Reduction with Inert Metal Hydroxides.

Adding CrIII or AlIII salts into the water suspension of platinum group metal (PGM) catalysts accelerated oxyanion pollutant reduction by up to 600%. Our initial attempts of adding K2CrVIO4, K2CrVI2O7, or KCrIII(SO4)2 into Pd/C enhanced BrO3- reduction with 1 atm H2 by 6-fold. Instrument characterizations and kinetic explorations collectively confirmed the immobilization of reduced CrVI as CrIII(OH)3 on the catalyst surface. This process altered the ζ-potentials from negative to positive, thus substantially enhancing the Langmuir-Hinshelwood adsorption equilibrium constant for BrO3- onto Pd/C by 37-fold. Adding AlIII(OH)3 from alum at pH 7 achieved similar enhancements. The Cr-Pd/C and Al-Pd/C showed top-tier efficiency of catalytic performance (normalized with Pd dosage) among all the reported Pd catalysts on conventional and nanostructured support materials. The strategy of adding inert metal hydroxides works for diverse PGMs (palladium and rhodium), substrates (BrO3- and ClO3-), and support materials (carbon, alumina, and silica). This work shows a simple, inexpensive, and effective example of enhancing catalyst activity and saving PGMs for environmental applications.

Substantial defluorination of polychlorofluorocarboxylic acids triggered by anaerobic microbial hydrolytic dechlorination.

Chlorinated polyfluorocarboxylic acids (Cl-PFCAs) derived from the widely used chlorotrifluoroethylene (CTFE) polymers and oligomers may enter and influence the aquatic environment. Here, we report significant defluorination of Cl-PFCAs by an anaerobic microbial community via novel pathways triggered by anaerobic microbial dechlorination. Cl-PFCAs first underwent microbial reductive, hydrolytic, and eliminative dechlorination, and it was the hydrolytic dechlorination that led to significant spontaneous defluorination. Hydrolytic dechlorination was favored with increased Cl-substitutions. An isolated, highly enriched anaerobic defluorinating culture was dominated by two genomes closest to Desulfovibrio aminophilus and Sporomusa sphaeroides, both of which exhibited active defluorination of CTFE tetramer acid. It implies the critical role played by anaerobic non-respiratory hydrolytic dechlorination in the fate of chlorinated polyfluoro-chemicals in natural and engineered water environments. The greatly enhanced biodegradability by Cl-substitutions also sheds light on the design of cost-effective treatment biotechnologies, as well as alternative PFAS that are readily biodegradable and less toxic.

[Analysis of three Chinese pedigrees affected with recurrent hydatidiform mole due to variants of NLRP7 gene].

OBJECTIVE: To explore the genetic etiology of recurrent hydatidiform mole (RHM) and provide accurate guidance for reproduction. METHODS: Peripheral venous blood samples of the probands with RHM and members from 5 unrelated pedigrees were collected. Genomic DNA was extracted by using routine method, and whole exome sequencing was carried out to detect variants of RHM-associated genes including NLRP7 and KHDC3L. Sanger sequencing and real-time quantitative PCR (RT-qPCR) were used to validate the candidate variants and delineate their parental origin. RESULTS: Homozygous or compound heterozygous variants of the NLRP7 gene were identified in four patients from three pedigrees, which included a homozygous deletion of exon 1 to 4 of NLRP7 in patient P1 and her elder sister, compound heterozygous variants of NLRP7 c.939delG (p.Q314Sfs*6) pat and c.1533delG (p.N512Tfs*4) mat in patient P2, and compound heterozygous variants of NLRP7 c.2389_2390delTC (p.A798Qfs*6) pat and c.2165A>G (p.D722G) mat in patient P4. All variants were interpreted as pathogenic or likely pathogenic according to the American College of Medical and Genomics (ACMG) guidelines. Among these, NLRP7 exons 1 to 4 deletion, c.939delG (p.Q314Sfs*6), c.1533delG (p.N512Tfs*4) and c.2389_2390delTC (p.A798Qfs*6) were unreported previously. CONCLUSION: Variants of the NLRP7 gene probably underlay autosomal recessive RHM in the three pedigrees, and definitive molecular diagnosis is beneficial for accurate genetic counseling. Above finding has also enriched the spectrum of the NLRP7 variants underlying RHM.

Identification and diagnosis of meniscus tear by magnetic resonance imaging using a deep learning model.

Objective: Meniscus tear is a common problem in sports trauma, and its imaging diagnosis mainly relies on MRI. To improve the diagnostic accuracy and efficiency, a deep learning model was employed in this study and the identification efficiency was evaluated. Methods: Standard knee MRI images from 924 individual patients were used to complete the training, validation and testing processes. Mask regional convolutional neural network (R-CNN) was used to build the deep learning network structure, and ResNet50 was adopted to develop the backbone network. The deep learning model was trained and validated with a dataset containing 504 and 220 patients, respectively. Internal testing was performed based on a dataset of 200 patients, and 180 patients from 8 hospitals were regarded as an external dataset for model validation. Additionally, 40 patients who were diagnosed by the arthroscopic surgery were enrolled as the final test dataset. Results: After training and validation, the deep learning model effectively recognized healthy and injured menisci. Average precision for the three types of menisci (healthy, torn and degenerated menisci) ranged from 68% to 80%. Diagnostic accuracy for healthy, torn and degenerated menisci was 87.50%, 86.96%, and 84.78%, respectively. Validation results from external dataset demonstrated that the accuracy of diagnosing torn and intact meniscus tear through 3.0T MRI images was higher than 80%, while the accuracy verified by arthroscopic surgery was 87.50%. Conclusion: Mask R-CNN effectively identified and diagnosed meniscal injuries, especially for tears that occurred in different parts of the meniscus. The recognition ability was admirable, and the diagnostic accuracy could be further improved with increased training sample size. Therefore, this deep learning model showed great potential in diagnosing meniscus injuries. Translational potential of this article: Deep learning model exerted unique effect in terms of reducing doctors' workload and improving diagnostic accuracy. Injured and healthy menisci could be more accurately identified and classified based on training and learning datasets. This model could also distinguish torn from degenerated menisci, making it an effective tool for MRI-assisted diagnosis of meniscus injuries in clinical practice.

Microbial Defluorination of Unsaturated Per- and Polyfluorinated Carboxylic Acids under Anaerobic and Aerobic Conditions: A Structure Specificity Study.

The recently discovered microbial reductive defluorination of two C6 branched and unsaturated fluorinated carboxylic acids (FCAs) provided valuable insights into the environmental fate of per- and polyfluoroalkyl substances (PFASs) and potential bioremediation strategies. However, a systematic investigation is needed to further demonstrate the role of C═C double bonds in the biodegradability of unsaturated PFASs. Here, we examined the structure-biodegradability relationships of 13 FCAs, including nine commercially available unsaturated FCAs and four structurally similar saturated ones, in an anaerobic defluorinating enrichment and an activated sludge community. The anaerobic and aerobic transformation/defluorination pathways were elucidated. The results showed that under anaerobic conditions, the α,ß-unsaturation is crucial for FCA biotransformation via reductive defluorination and/or hydrogenation pathways. With sp2 C-F bonds being substituted by C-H bonds, the reductive defluorination became less favorable than hydrogenation. Moreover, for the first time, we reported enhanced degradability and defluorination capability of specific unsaturated FCA structures with trifluoromethyl (-CF3) branches at the α/ß-carbon. Such FCA structures can undergo anaerobic abiotic defluorination in the presence of reducing agents and significant aerobic microbial defluorination. Given the diverse applications and emerging concerns of fluorochemicals, this work not only advances the fundamental understanding of the fate of unsaturated PFASs in natural and engineered environments but also may provide insights into the design of readily degradable fluorinated alternatives to existing PFAS compounds.

Electrocatalytic Perchlorate Reduction Using an Oxorhenium Complex Supported on a Ti4O7 Reactive Electrochemical Membrane.

An organometallic rhenium catalyst was deposited on a Ti4O7 reactive electrochemical membrane (Re/REM) for the electrocatalytic reduction of aqueous ClO4- to Cl-. Results showed increasing ClO4- reduction upon increasing cathodic potential (i.e., -0.4 to-1.7 V/SHE). A 5 mM ClO4- solution was reduced by ∼21% in a single pass (residence time ∼0.2 s) through the Re/REM at a pH of 7, with >99% Cl- selectivity and a current efficiency of ∼100%. Kinetic analysis indicated that the reaction rate constant increased from 3953 to 7128 L h-1 gRe-1 at pH values of 9 to 3, respectively, and was mass transport-limited at pH < 5. The rate constants were 2 orders of magnitude greater than reported values for an analogous catalytic system using hydrogen as an electron donor. A continuous flow Re/REM system reduced 1 ppm ClO4- in a groundwater sample by >99.9% for the first 93.5 h, and concentrations were lower than the EPA ClO4- guideline (56 ppb) for 374 h of treatment. The fast ClO4- reduction kinetics and high chloride selectivity without the need for acidic conditions and a continual hydrogen electron donor supply for catalyst regeneration indicate the promising ability of the Re/REM for aqueous electrocatalytic ClO4- treatment.

Accelerated Degradation of Perfluorosulfonates and Perfluorocarboxylates by UV/Sulfite + Iodide: Reaction Mechanisms and System Efficiencies.

The addition of iodide (I-) in the UV/sulfite system (UV/S) significantly accelerated the reductive degradation of perfluorosulfonates (PFSAs, CnF2n+1SO3-) and perfluorocarboxylates (PFCAs, CnF2n+1COO-). Using the highly recalcitrant perfluorobutane sulfonate (C4F9SO3-) as a probe, we optimized the UV/sulfite + iodide system (UV/S + I) to degrade n = 1-7 PFCAs and n = 4, 6, 8 PFSAs. In general, the kinetics of per- and polyfluoroalkyl substance (PFAS) decay, defluorination, and transformation product formations in UV/S + I were up to three times faster than those in UV/S. Both systems achieve a similar maximum defluorination. The enhanced reaction rates and optimized photoreactor settings lowered the EE/O for PFCA degradation below 1.5 kW h m-3. The relatively high quantum yield of eaq- from I- made the availability of hydrated electrons (eaq-) in UV/S + I and UV/I two times greater than that in UV/S. Meanwhile, the rapid scavenging of reactive iodine species by SO32- made the lifetime of eaq- in UV/S + I eight times longer than that in UV/I. The addition of I- also substantially enhanced SO32- utilization in treating concentrated PFAS. The optimized UV/S + I system achieved >99.7% removal of most PFSAs and PFCAs and >90% overall defluorination in a synthetic solution of concentrated PFAS mixtures and NaCl. We extended the discussion over molecular transformation mechanisms, development of PFAS degradation technologies, and the fate of iodine species.

Defluorination of Omega-Hydroperfluorocarboxylates (ω-HPFCAs): Distinct Reactivities from Perfluoro and Fluorotelomeric Carboxylates.

Omega-hydroperfluorocarboxylates (ω-HPFCAs, HCF2-(CF2)n-1-COO-) are commercially available in bulk quantities and have been applied in agrochemicals, fluoropolymer production, and semiconductor coating. In this study, we used kinetic measurements, theoretical calculations, model compound experiments, and transformation product analyses to reveal novel mechanistic insights into the reductive and oxidative transformation of ω-HPFCAs. Like perfluorocarboxylates (PFCAs, CF3-(CF2)n-1-COO-), the direct linkage between HCnF2n- and -COO- enables facile degradation under UV/sulfite treatment. To our surprise, the presence of the H atom on the remote carbon makes ω-HPFCAs more susceptible than PFCAs to decarboxylation (i.e., yielding shorter-chain ω-HPFCAs) and less susceptible to hydrodefluorination (i.e., H/F exchange). Like fluorotelomer carboxylates (FTCAs, CnF2n+1-CH2CH2-COO-), the C-H bond in HCF2-(CF2)n-1-COO- allows hydroxyl radical oxidation and limited defluorination. While FTCAs yielded PFCAs in all chain lengths, ω-HPFCAs only yielded -OOC-(CF2)n-1-COO- (major) and -OOC-(CF2)n-2-COO- (minor) due to the unfavorable ß-fragmentation pathway that shortens the fluoroalkyl chain. We also compared two treatment sequences-UV/sulfite followed by heat/persulfate and the reverse-toward complete defluorination of ω-HPFCAs. The findings will benefit the treatment and monitoring of H-containing per- and polyfluoroalkyl substance (PFAS) pollutants as well as the design of future fluorochemicals.