Unraveling the role of Mn(V)/Mn(III) in the enhanced permanganate oxidation under Vis-LED radiation.

A novel approach of visible light-emitting diode (Vis-LED) radiation was employed to activate permanganate (Mn(VII)) for efficient organic micropollutant (OMP) removal. The degradation rates of OMPs by Vis-LED/Mn(VII) were 2-5.29 times higher than those by Mn(VII) except for benzoic acid and atrazine. Increasing wavelengths (445-525 nm) suppressed the degradation of diclofenac (DCF) and 4-chlorophenol (4-CP) owing to the decreased quantum yields of Mn(VII). Comparatively, light intensity and Mn(VII) dosage had a positive effect on the degradation of DCF and 4-CP. Experimental data revealed that Mn(V) dominated the DCF degradation whereas Mn(III) was the active oxidant in the 4-CP degradation. Mn(V) and Mn(III) formed from the photo-decomposition of Mn(VII), meanwhile, Mn(III) also formed from the Mn(V) photo-decomposition. The increase in solution pH inhibited DCF degradation but had a positive impact on 4-CP degradation, mainly due to the changing speciation of DCF and 4-CP. Inorganic anions (Cl- and HCO3-) had little impact on DCF and 4-CP degradation, while humic acid (HA) showed a positive impact because of the π-π interaction between HA and DCF/4-CP. The transformation products of DCF and 4-CP were identified and transformation pathways were proposed. Finally, the Vis-LED/Mn(VII) exhibited great degradation performance in various authentic waters. Overall, this study boosts the development of Mn(VII)-based oxidation processes.

Effect of simethicone for the management of early abdominal distension after laparoscopic cholecystectomy: a multicenter retrospective propensity score matching study.

OBJECTIVE: To investigate whether simethicone expediates the remission of abdominal distension after laparoscopic cholecystectomy (LC). METHODS: This retrospective study involved LC patients who either received perioperative simethicone treatment or not. Propensity score matching (PSM) was employed to minimize bias. The primary endpoint was the remission rate of abdominal distension within 24 h after LC. Univariable and multivariable logistic regression analyses were conducted to identify independent risk factors affecting the early remission of abdominal distension after LC. Subsequently, a prediction model was established and validated. RESULTS: A total of 1,286 patients were divided into simethicone (n = 811) and non-simethicone groups (n = 475) as 2:1 PSM. The patients receiving simethicone had better remission rates of abdominal distension at both 24 h and 48 h after LC (49.2% vs. 34.7%, 83.9% vs. 74.8%, respectively), along with shorter time to the first flatus (14.6 ± 11.1 h vs. 17.2 ± 9.1 h, P < 0.001) compared to those without. Multiple logistic regression identified gallstone (OR = 0.33, P = 0.001), cholecystic polyp (OR = 0.53, P = 0.050), preoperative abdominal distention (OR = 0.63, P = 0.002) and simethicone use (OR = 1.89, P < 0.001) as independent factors contributing to the early remission of abdominal distension following LC. The prognosis model developed for predicting remission rates of abdominal distension within 24 h after LC yielded an area under the curve of 0.643 and internal validation a value of 0.644. CONCLUSIONS: Simethicone administration significantly enhanced the early remission of post-LC abdominal distension, particularly for patients who had gallstones, cholecystic polyp, prolonged anesthesia or preoperative abdominal distention. TRIAL REGISTRATION: ChiCTR2200064964 (24/10/2022).

Physical-Chemical Coupling Coassembly Approach to Branched Magnetic Mesoporous Nanochains with Adjustable Surface Roughness.

Self-assembly processes triggered by physical or chemical driving forces have been applied to fabricate hierarchical materials with subtle nanostructures. However, various physicochemical processes often interfere with each other, and their precise control has remained a great challenge. Here, in this paper, a rational synthesis of 1D magnetite-chain and mesoporous-silica-nanorod (Fe3O4&mSiO2) branched magnetic nanochains via a physical-chemical coupling coassembly approach is reported. Magnetic-field-induced assembly of magnetite Fe3O4 nanoparticles and isotropic/anisotropic assembly of mesoporous silica are coupled to obtain the delicate 1D branched magnetic mesoporous nanochains. The nanochains with a length of 2-3 µm in length are composed of aligned Fe3O4@mSiO2 nanospheres with a diameter of 150 nm and sticked-out 300 nm long mSiO2 branches. By properly coordinating the multiple assembly processes, the density and length of mSiO2 branches can well be adjusted. Because of the unique rough surface and length in correspondence to bacteria, the designed 1D Fe3O4&mSiO2 branched magnetic nanochains show strong bacterial adhesion and pressuring ability, performing bacterial inhibition over 60% at a low concentration (15 µg mL-1). This cooperative coassembly strategy deepens the understanding of the micro-nanoscale assembly process and lays a foundation for the preparation of the assembly with adjustable surface structures and the subsequent construction of complex multilevel structures.

Nucleation-Inhibited Emulsion Interfacial Assembled Polydopamine Microvesicles as Artificial Antigen-Presenting Cells.

Albeit microemulsion systems have emerged as efficient platforms for fabricating tunable nano/microstructures, lack of understanding on the emulsion-interfacial assembly hindered the control of fabrication. Herein, a nucleation-inhibited microemulsion interfacial assembly method is proposed, which deviates from conventional interfacial nucleation approaches, for the synthesis of polydopamine microvesicles (PDA MVs). These PDA MVs exhibit an approximate diameter of 1 µm, showcasing a pliable structure reminiscent of cellular morphology. Through modifications of antibodies on the surface of PDA MVs, their capacity as artificial antigen presentation cells is evaluated. In comparison to solid nanoparticles, PDA MVs with cell-like structures show enhanced T-cell activation, resulting in a 1.5-fold increase in CD25 expression after 1 day and a threefold surge in PD-1 positivity after 7 days. In summary, the research elucidates the influence of nucleation and interfacial assembly in microemulsion polymerization systems, providing a direct synthesis method for MVs and substantiating their effectiveness as artificial antigen-presenting cells.

Spatially Asymmetric Nanoparticles for Boosting Ferroptosis in Tumor Therapy.

Despite its effectiveness in eliminating cancer cells, ferroptosis is hindered by the high natural antioxidant glutathione (GSH) levels in the tumor microenvironment. Herein, we developed a spatially asymmetric nanoparticle, Fe3O4@DMS&PDA@MnO2-SRF, for enhanced ferroptosis. It consists of two subunits: Fe3O4 nanoparticles coated with dendritic mesoporous silica (DMS) and PDA@MnO2 (PDA: polydopamine) loaded with sorafenib (SRF). The spatial isolation of the Fe3O4@DMS and PDA@MnO2-SRF subunits enhances the synergistic effect between the GSH-scavengers and ferroptosis-related components. First, the increased exposure of the Fe3O4 subunit enhances the Fenton reaction, leading to increased production of reactive oxygen species. Furthermore, the PDA@MnO2-SRF subunit effectively depletes GSH, thereby inducing ferroptosis by the inactivation of glutathione-dependent peroxidases 4. Moreover, the SRF blocks Xc- transport in tumor cells, augmenting GSH depletion capabilities. The dual GSH depletion of the Fe3O4@DMS&PDA@MnO2-SRF significantly weakens the antioxidative system, boosting the chemodynamic performance and leading to increased ferroptosis of tumor cells.

Localized Oxidation Embellishing Strategy Enables High-Performance Perovskite Solar Cells.

Perovskite solar cell (pero-SC) has attracted extensive studies as a promising photovoltaic technology, wherein the electron extraction and transfer exhibit pivotal effect to the device performance. The planar SnO2 electron transport layer (ETL) has contributed the recent record power conversion efficiency (PCE) of the pero-SCs, yet still suffers from surface defects of SnO2 nanoparticles which brings energy loss and phase instability. Herein, we report a localized oxidation embellishing (LOE) strategy by applying (NH4 )2 CrO4 on the SnO2 ETL. The LOE strategy builds up plentiful nano-heterojunctions of p-Cr2 O3 /n-SnO2 and the nano-heterojunctions compensate the surface defects and realize benign energy alignment, which reduces surface non-radiative recombination and voltage loss of the pero-SCs. Meanwhile, the decrease of lattice mismatch released the lattice distortion and eliminated tensile stress, contributing to better stability of the devices. The pero-SCs based on α-FAPbI3 with the SnO2 ETL treated by the LOE strategy realized a PCE of 25.72 % (certified as 25.41 %), along with eminent stability performance of T90 >700 h. This work provides a brand-new view for defect modification of SnO2 electron transport layer.

Surface curvature-induced oriented assembly of sushi-like Janus therapeutic nanoplatform for combined chemodynamic therapy.

BACKGROUND: Chemodynamic therapy (CDT) based on Fenton/Fenton-like reaction has emerged as a promising cancer treatment strategy. Yet, the strong anti-oxidation property of tumor microenvironment (TME) caused by endogenous glutathione (GSH) still severely impedes the effectiveness of CDT. Traditional CDT nanoplatforms based on core@shell structure possess inherent interference of different subunits, thus hindering the overall therapeutic efficiency. Consequently, it is urgent to construct a novel structure with isolated functional units and GSH depletion capability to achieve desirable combined CDT therapeutic efficiency. RESULTS: Herein, a surface curvature-induced oriented assembly strategy is proposed to synthesize a sushi-like novel Janus therapeutic nanoplatform which is composed of two functional units, a FeOOH nanospindle serving as CDT subunit and a mSiO2 nanorod serving as drug-loading subunit. The FeOOH CDT subunit is half covered by mSiO2 nanorod along its long axis, forming sushi-like structure. The FeOOH nanospindle is about 400 nm in length and 50 nm in diameter, and the mSiO2 nanorod is about 550 nm in length and 100 nm in diameter. The length and diameter of mSiO2 subunit can be tuned in a wide range while maintaining the sushi-like Janus structure, which is attributed to a Gibbs-free-energy-dominating surface curvature-induced oriented assembly process. In this Janus therapeutic nanoplatform, Fe3+ of FeOOH is firstly reduced to Fe2+ by endogenous GSH, the as-generated Fe2+ then effectively catalyzes overexpressed H2O2 in TME into highly lethal ·OH to achieve efficient CDT. The doxorubicin (DOX) loaded in the mSiO2 subunit can be released to achieve combined chemotherapy. Taking advantage of Fe3+-related GSH depletion, Fe2+-related enhanced ·OH generation, and DOX-induced chemotherapy, the as-synthesized nanoplatform possesses excellent therapeutic efficiency, in vitro eliminating efficiency of tumor cells is as high as ~ 87%. In vivo experiments also show the efficient inhibition of tumor, verifying the synthesized sushi-like Janus nanoparticles as a promising therapeutic nanoplatform. CONCLUSIONS: In general, our work provides a successful paradigm of constructing novel therapeutic nanoplatform to achieve efficient tumor inhibition.

Mesoporous Nano-Badminton with Asymmetric Mass Distribution: How Nanoscale Architecture Affects the Blood Flow Dynamics.

While the nanobio interaction is crucial in determining nanoparticles' in vivo fate, a previous work on investigating nanoparticles' interaction with biological barriers is mainly carried out in a static state. Nanoparticles' fluid dynamics that share non-negligible impacts on their frequency of encountering biological hosts, however, is seldom given attention. Herein, inspired by badmintons' unique aerodynamics, badminton architecture Fe3O4&mPDA (Fe3O4 = magnetite nanoparticle and mPDA = mesoporous polydopamine) Janus nanoparticles have successfully been synthesized based on a steric-induced anisotropic assembly strategy. Due to the "head" Fe3O4 having much larger density than the mPDA "cone", it shows an asymmetric mass distribution, analogous to real badminton. Computational simulations show that nanobadmintons have a stable fluid posture of mPDA cone facing forward, which is opposite to that for the real badminton. The force analysis demonstrates that the badminton-like morphology and mass distribution endow the nanoparticles with a balanced motion around this posture, making its movement in fluid stable. Compared to conventional spherical Fe3O4@mPDA nanoparticles, the Janus nanoparticles with an asymmetric mass distribution have straighter blood flow trails and ∼50% reduced blood vessel wall encountering frequency, thus providing doubled blood half-life and ∼15% lower organ uptakes. This work provides novel methodology for the fabrication of unique nanomaterials, and the correlations between nanoparticle architectures, biofluid dynamics, organ uptake, and blood circulation time are successfully established, providing essential guidance for designing future nanocarriers.

Enhanced hydroxyl radical generation for micropollutant degradation in the In2O3/Vis-LED process through the addition of periodate.

Periodate (PI) as an oxidant has been extensively studied for organic foulants removal in advanced oxidation processes. Here PI was introduced into In2O3/Vis-LED process to enhance the formation of ·OH for promoting the degradation of organic foulants. Results showed that the addition of PI would significantly promote the removal of sulfamethoxazole (SMX) in the In2O3/Vis-LED process (from 9.26% to 100%), and ·OH was proved to be the dominant species in the system. Besides, the process exhibited non-selectivity in the removal of different organic foulants. Comparatively, various oxidants (e.g., peroxymonosulfate, peroxydisulfate, and hydrogen peroxide) did not markedly promote the removal of SMX in the In2O3/Vis-LED process. Electrochemical analyses demonstrated that PI could effectively receive photoelectrons, thus inhibiting the recombination of photogenerated electron-hole (e-/h+) pairs. The holes then oxidized the adsorbed H2O to generate ·OH, and the PI converted to iodate at the same time. Additionally, the removal rate of SMX reduced from 100% to 17.2% as Vis-LED wavelengths increased from 440 to 560 nm, because of the low energy of photons produced at longer wavelengths. Notably, the species of PI do not affect its ability to accept electrons, resulting in the degradation efficiency of SMX irrespective of pH (4.0-10.0). The coexistence of inorganic cations and anions (such as Cl-, CO32-/HCO3-, SO42-, Ca2+, and Mg2+) also had an insignificant effect on SMX degradation. Furthermore, the process also showed excellent degradation potential in real water. The proposed strategy provides a new insight for visible light-catalyzed activation of PI and guidance to explore green catalytic processes for high-efficiency removal of various organic foulants.

Versatile synthesis of metal-compound based mesoporous Janus nanoparticles.

The construction of mesoporous Janus nanoparticles (mJNPs) with controllable components is of great significance for the development of sophisticated nanomaterials with synergistically enhanced functionalities and applications. However, the compositions of reported mJNPs are mainly the functionally inert SiO2 and polymers. The universal synthesis of metal-compound based mJNPs with abundant functionalities is urgently desired, but remains a substantial challenge. Herein, we present a hydrophilicity mediated interfacial selective assembly strategy for the versatile synthesis of metal-compound based mJNPs. Starting from the developed silica-based mJNPs with anisotropic dual-surface of hydrophilic SiO2 and hydrophobic organosilica, metal precursor can selectively deposit onto the hydrophilic SiO2 subunit to form the metal-compound based mJNPs. This method shows good universality and can be used for the synthesis of more than 20 kinds of metal-compound based mJNPs, including alkali-earth metal compounds, transition metal compounds, rare-earth metal compounds etc. Besides, the composition of the metal-compound subunit can be well tuned from single to multiple metal elements, even high-entropy complexes. We believe that the synthesis method and obtained new members of mJNPs provide a very broad platform for the construction and application of mJNPs with rational designed functions and structures.

Emerging enzyme-based nanocomposites for catalytic biomedicine.

With the promising advances in nanomedicine, numerous strategies have emerged for the diagnosis and treatment of diseases. Among them, enzyme-based multifunctional nanocomposites have attracted a great deal of attention in the field of catalytic biomedicine. These nanocomposites with high catalytic activity are capable of converting low/non-toxic substances into therapeutic ones, thus realizing highly efficient, site-specific therapy with minimal side effects. Enzyme-based nanocomposites for catalytic biomedicine are mainly divided into three types: (i) natural-enzyme based nanocomposites; (ii) artificial-nanozyme based nanocomposites; and (iii) nanocomposites of natural-enzymes and nanozymes. In this review, we discuss key aspects of enzyme-based catalytic biomedicine, including the construction of enzyme-based nanocomposites, their unique properties and applications in catalytic biomedicine. We also highlight the main challenges faced in this field, and provide relevant guidelines for the rational design and extensive application of enzyme-based nanocomposites from our point of view.

Emulsion-oriented assembly for Janus double-spherical mesoporous nanoparticles as biological logic gates.

The ability of Janus nanoparticles to establish biological logic systems has been widely exploited, yet conventional non/uni-porous Janus nanoparticles are unable to fully mimic biological communications. Here we demonstrate an emulsion-oriented assembly approach for the fabrication of highly uniform Janus double-spherical MSN&mPDA (MSN, mesoporous silica nanoparticle; mPDA, mesoporous polydopamine) nanoparticles. The delicate Janus nanoparticle possesses a spherical MSN with a diameter of ~150 nm and an mPDA hemisphere with a diameter of ~120 nm. In addition, the mesopore size in the MSN compartment is tunable from ~3 to ~25 nm, while those in the mPDA compartments range from ~5 to ~50 nm. Due to the different chemical properties and mesopore sizes in the two compartments, we achieve selective loading of guests in different compartments, and successfully establish single-particle-level biological logic gates. The dual-mesoporous structure enables consecutive valve-opening and matter-releasing reactions within one single nanoparticle, facilitating the design of single-particle-level logic systems.

Multifunctional Janus Nanoplatform for Efficiently Synergistic Theranostics of Rheumatoid Arthritis.

Progress has been made in the application of nanomedicine in rheumatoid arthritis (RA) treatment. However, the whole process of monitoring and treatment of RA remains a formidable challenge due to the complexity of the chronic autoimmune disease. In this study, we develop a Janus nanoplatform (denoted as Janus-CPS) composed of CeO2-Pt nanozyme subunit on one side and periodic mesoporous organosilica (PMO) subunit on another side for simultaneous early diagnosis and synergistic therapy of RA. The Janus nanostructure, which enables more active sites to be exposed, enhances the reactive oxygen species scavenging capability of CeO2-Pt nanozyme subunit as compared to their core-shell counterpart. Furthermore, micheliolide (MCL), an extracted compound from natural plants with anti-osteoclastogenesis effects, is loaded into the mesopores of PMO subunit to synergize with the anti-inflammation effect of nanozymes for efficient RA treatment, which has been demonstrated by in vitro cellular experiments and in vivo collagen-induced arthritis (CIA) model. In addition, by taking advantage of the second near-infrared window (NIR-II) fluorescent imaging, indocyanine green (ICG)-loaded Janus-CPS exhibits desirable effectiveness in detecting RA lesions at a very early stage. It is anticipated that such a Janus nanoplatform may offer an alternative strategy of functional integration for versatile theranostics.

Site-specific anisotropic assembly of amorphous mesoporous subunits on crystalline metal-organic framework.

As an important branch of anisotropic nanohybrids (ANHs) with multiple surfaces and functions, the porous ANHs (p-ANHs) have attracted extensive attentions because of the unique characteristics of high surface area, tunable pore structures and controllable framework compositions, etc. However, due to the large surface-chemistry and lattice mismatches between the crystalline and amorphous porous nanomaterials, the site-specific anisotropic assembly of amorphous subunits on crystalline host is challenging. Here, we report a selective occupation strategy to achieve site-specific anisotropic growth of amorphous mesoporous subunits on crystalline metal-organic framework (MOF). The amorphous polydopamine (mPDA) building blocks can be controllably grown on the {100} (type 1) or {110} (type 2) facets of crystalline ZIF-8 to form the binary super-structured p-ANHs. Based on the secondary epitaxial growth of tertiary MOF building blocks on type 1 and 2 nanostructures, the ternary p-ANHs with controllable compositions and architectures are also rationally synthesized (type 3 and 4). These intricate and unprecedented superstructures provide a good platform for the construction of nanocomposites with multiple functionalities and understanding of the structure-property-function relationships.

Camouflaged Virus-Like-Nanocarrier with a Transformable Rough Surface for Boosting Drug Delivery.

Due to non-specific strong nano-bio interactions, it is difficult for nanocarriers with permanent rough surface to cross multiple biological barriers to realize efficient drug delivery. Herein, a camouflaged virus-like-nanocarrier with a transformable rough surface is reported, which is composed by an interior virus-like mesoporous SiO2 nanoparticle with a rough surface (vSiO2 ) and an exterior acid-responsive polymer. Under normal physiological pH condition, the spikes on vSiO2 are hidden by the polymer shell, and the non-specific strong nano-bio interactions are effectively inhibited. While in the acidic tumor microenvironment, the nanocarrier sheds the polymer camouflage to re-expose its rough surface. So, the retention ability and endocytosis efficiency of the nanocarrier are great improved. Owing to it's the dynamically variable rough surface, the rationally designed nanocarrier exhibits extended blood-circulation-time and enhanced tumor accumulation.

Discussion on machine learning technology to predict tacrolimus blood concentration in patients with nephrotic syndrome and membranous nephropathy in real-world settings.

BACKGROUND: Given its narrow treatment window, high toxicity, adverse effects, and individual differences in its use, we collected and sorted data on tacrolimus use by real patients with kidney diseases. We then used machine learning technology to predict tacrolimus blood concentration in order to provide a basis for tacrolimus dose adjustment and ensure patient safety. METHODS: This study involved 913 hospitalized patients with nephrotic syndrome and membranous nephropathy treated with tacrolimus. We evaluated data related to patient demographics, laboratory tests, and combined medication. After data cleaning and feature engineering, six machine learning models were constructed, and the predictive performance of each model was evaluated via external verification. RESULTS: The XGBoost model outperformed other investigated models, with a prediction accuracy of 73.33%, F-beta of 91.24%, and AUC of 0.5531. CONCLUSIONS: Through this exploratory study, we could determine the ability of machine learning to predict TAC blood concentration. Although the results prove the predictive potential of machine learning to some extent, in-depth research is still needed to resolve the XGBoost model's bias towards positive class and thereby facilitate its use in real-world settings.

Versatile synthesis of dendritic mesoporous rare earth-based nanoparticles.

Rare earth-based nanomaterials that have abundant optical, magnetic, and catalytic characteristics have many applications. The controllable introduction of mesoporous channels can further enhance its performance, such as exposing more active sites of rare earth and improving the loading capacity, yet remains a challenge. Here, we report a universal viscosity-mediated assembly strategy and successfully endowed rare earth-based nanoparticles with central divergent dendritic mesopores. More than 40 kinds of dendritic mesoporous rare earth-based (DM-REX) nanoparticles with desired composition (single or multiple rare earth elements, high-entropy compounds, etc.), particle diameter (80 to 500 nanometers), pore size (3 to 20 nanometers), phase (amorphous hydroxides, crystalline oxides, and fluorides), and architecture were synthesized. Theoretically, a DM-REX nanoparticle library with 393,213 kinds of possible combinations can be constructed on the basis of this versatile method, which provides a very broad platform for the application of rare earth-based nanomaterials with rational designed functions and structures.

Enzyme-Based Mesoporous Nanomotors with Near-Infrared Optical Brakes.

As one of the most important parameters of the nanomotors' motion, precise speed control of enzyme-based nanomotors is highly desirable in many bioapplications. However, owing to the stable physiological environment, it is still very difficult to in situ manipulate the motion of the enzyme-based nanomotors. Herein, inspired by the brakes on vehicles, the near-infrared (NIR) "optical brakes" are introduced in the glucose-driven enzyme-based mesoporous nanomotors to realize remote speed regulation for the first time. The novel nanomotors are rationally designed and fabricated based on the Janus mesoporous nanostructure, which consists of the SiO2@Au core@shell nanospheres and the enzymes-modified periodic mesoporous organosilicas (PMOs). The nanomotor can be driven by the biofuel of glucose under the catalysis of enzymes (glucose oxidase/catalase) on the PMO domain. Meanwhile, the Au nanoshell at the SiO2@Au domain enables the generation of the local thermal gradient under the NIR light irradiation, driving the nanomotor by thermophoresis. Taking advantage of the unique Janus nanostructure, the directions of the driving force induced by enzyme catalysis and the thermophoretic force induced by NIR photothermal effect are opposite. Therefore, with the NIR optical speed regulators, the glucose-driven nanomotors can achieve remote speed manipulation from 3.46 to 6.49 µm/s (9.9-18.5 body-length/s) at the fixed glucose concentration, even after covering with a biological tissue. As a proof of concept, the cellar uptake of the such mesoporous nanomotors can be remotely regulated (57.5-109 µg/mg), which offers great potential for designing smart active drug delivery systems based on the mesoporous frameworks of this novel nanomotor.

Enhanced removal of organoarsenic by chlorination: Kinetics, effect of humic acid, and adsorbable chlorinated organoarsenic.

In this study, the effective removal of organoarsenic by the combined process of "chlorination + Fe(II)" was achieved. Chlorine could effectively degrade roxarsone (ROX) over pH from 5 to 10. The fitting results of acid-base protonation model proved that the degradation of ROX was mainly attributed to the reaction of HOCl and deprotonated ROX. The transformation of arsenic species conformed to the fitting results of two-channel kinetic model, in which 32.4% of ROX was oxidized to As(V) via electron transfer pathway (ii) and the rest was converted into monochloro-ROX via electrophilic substitution pathway (i). Humic acid inhibited the degradation of ROX due to the competitive consumption of chlorine and the restraint on the pathway ii. Subsequently, an enhanced removal of total arsenic achieved after chlorination, due to that the generating As(V) and monochloro-ROX were easier adsorbed compared with ROX, over 97.8% of total arsenic was removed by ferric (oxyhydr)oxides which in-situ formed from the oxidation of Fe(II). Additionally, toxicity studies indicated that the acute toxicity was significantly eliminated by adding Fe(II) after chlorination, likely due to the removal of As(V) and chlorinated products. Furthermore, organoarsenic was also effectively removed by the combined process of "chlorination + Fe(II)" in real water.

Imparting multi-functionality to covalent organic framework nanoparticles by the dual-ligand assistant encapsulation strategy.

The potential applications of covalent organic frameworks (COFs) can be further developed by encapsulating functional nanoparticles within the frameworks. However, the synthesis of monodispersed core@shell structured COF nanocomposites without agglomeration remains a significant challenge. Herein, we present a versatile dual-ligand assistant strategy for interfacial growth of COFs on the functional nanoparticles with abundant physicochemical properties. Regardless of the composition, geometry or surface properties of the core, the obtained core@shell structured nanocomposites with controllable shell-thickness are very uniform without agglomeration. The derived bowl-shape, yolk@shell, core@satellites@shell nanostructures can also be fabricated delicately. As a promising type of photosensitizer for photodynamic therapy (PDT), the porphyrin-based COFs were grown onto upconversion nanoparticles (UCNPs). With the assistance of the near-infrared (NIR) to visible optical property of UCNPs core and the intrinsic porosity of COF shell, the core@shell nanocomposites can be applied as a nanoplatform for NIR-activated PDT with deep tissue penetration and chemotherapeutic drug delivery.