A protective mechanism of heat inactivation to enhance Levilactobacillus brevis PDD-2 against alcohol-induced chronic liver disease based on proteomic analysis.

A proteomics-based analysis of the effect of heat inactivation on the alleviation of alcoholic liver disease (ALD) using Levilactobacillus brevis PDD-2 is presented, aimed at exploring the potential and mechanisms of postbiotic elements prepared through heat inactivation in the treatment of ALD. It was found that L. brevis PDD-2 and its postbiotic (heat-inactivated L. brevis PDD-2) alleviate chronic ALD via the gut-liver axis. In particular, heat-inactivated L. brevis PDD-2 significantly increased the relative abundance of Erysipelotrichaceae and better facilitated the oxidative stress balance in the liver. The tandem mass tag (TMT)-based quantitative proteomics technique analyses revealed that heat-inactivated L. brevis PDD-2 was associated with up-regulated expression levels of proteins related to the redox system, cellular metabolism, amino acid and oligopeptide transport, and surface proteins with immunomodulatory capacity. These findings provide a theoretical basis for developing novel therapeutic strategies and lay a solid foundation for further revealing its exhaustive mechanisms.

Proteomic Analysis of Milk Fat Globule Membrane Protein Modulation of Differently Expressed Proteins in Lactobacillus plantarum under Bile Salt Stress.

Tolerance to bile stress is a crucial property for lactic acid bacteria (LAB) to survive in the gastrointestinal tract and exert their beneficial effects. Whey powder enriched with milk fat globule membrane proteins (M-WPI) as a functional component is protective for strains under stress conditions. The current study investigated the key mechanisms of action involved in Lactobacillus plantarum (L. plantarum) CGMCC 23701 survival in the presence of bile and the protective mechanism of M-WPI. According to proteomic analysis (proteomics), there could be several reasons for the greater protective effect of M-WPI. These include promoting the synthesis of fatty acids and peptidoglycans to repair the structure of the cell surface, regulating the metabolism of carbohydrates and amino acids to release energy and produce a range of precursors, enabling the expression of the repair system to repair damaged DNA, and promoting the expression of proteins associated with the multidrug efflux pump, which facilitates the exocytosis of intracellular bile salts. This study helps us to better understand the changes in proteome of L. plantarum CGMCC 23701 under bile salt stress and M-WPI protection, which will provide a new method for the protection and development of functional LAB.

Binary probiotic fermentation promotes signal (cyclic AMP) exchange to increases the number of viable probiotics, anthocyanins and polyphenol content, and the odor scores of wolfberry fermented beverages.

The effects and underlying molecular mechanisms of binary probiotics (Lactiplantibacillus plantarum subsp. plantarum CGMCC 1.5953 and Lacticaseibacillus casei CGMCC 1.5956) on the quality of wolfberry fermented beverages (WFB) were investigated. The results indicated that binary probiotics increased the number of probiotics, anthocyanin (89.92 ± 1.64 mg/L), polyphenol content (283.04 ± 3.81 µg/mL), and odor score (24.19) in WFB. Metabolomics found that they could enhance signal exchange (cyclic AMP) between binary probiotics and improve the utilization of citrulline, d-proline, d-glucose, and d-galactose through galactose metabolism and amino acid biosynthesis pathway to promote probiotics growth. Furthermore, HS-SPME-GC-MS and GS-IMS revealed that the improvement in flavor was mainly due to an increase in the content of the aromatic flavor substances 3-heptanol, glutaraldehyde, and 2-heptanone, and a decrease in the content of the off-flavor substances methyl isobutyl ketone-D and 2-undecanone. This is strategically important for the development of WFB with high probiotic content and unique flavor.

Highly Efficient Monolithic Perovskite/Perovskite/Silicon Triple-Junction Solar Cells.

Wide-bandgap metal halide perovskites have demonstrated promise in multijunction photovoltaic (PV) cells. However, photoinduced phase segregation and the resultant low open-circuit voltage (Voc) have greatly limited the PV performance of perovskite-based multijunction devices. Here, a alloying strategy is reported to achieve uniform distribution of triple cations and halides in wide-bandgap perovskites by doping Rb+ and Cl- with small ionic radii, which effectively suppresses halide phase segregation while promoting the homogenization of surface potential. Based on this strategy, a Voc of 1.33 V is obtained from single-junction perovskite solar cells, and a VOC approaching 3.0 V and a power conversion efficiency of 25.0% (obtained from reverse scan direction, certified efficiency: 24.19%) on an 1.04 cm2 photoactive area can be achieved in a perovskite/perovskite/c-Si triple-junction tandem cell, where the certification efficiency is by far the greatest performance of perovskite-based triple-junction tandem solar cells. This work overcomes the performance deadlock of perovskite-based triple-junction tandem cells by setting a materials-by-design paradigm.

Ionic Liquid Modified Polymer Intermediate Layer for Improved Charge Extraction toward Efficient and Stable Perovskite/Silicon Tandem Solar Cells.

Monolithic perovskite/silicon tandem solar cells have been attracted much attention in recent years. Despite their high performances, the stability issue of perovskite-based devices is recognized as one of the key challenges to realize industrial application. When comes to the perovskite top subcell, the interface between perovskite and electron transporting layers (usually C60) significantly affects the device efficiency as well as the stability due to their poor adhesion. Here, different from the conventional interfacial passivation using metal fluorides, a hybrid intermediate layer is proposed-PMMA functionalized with ionic liquid (IL)-is introduced at the perovskite/C60 interface. The application of PMMA essentially improves the interfacial stability due to its strong hydrophobicity, while adding IL relieves the charge accumulation between PMMA and the perovskite. Thus, an optimal wide-bandgap perovskite solar cells achieves power conversion efficiency of 20.62%. These cells are further integrated as top subcells with silicon bottom cells in a monolithic tandem structure, presenting an optimized PCE up to 27.51%. More importantly, such monolithic perovskite/silicon cells exhibit superior stability by maintaining 90% of initial efficiency after 1200 h under continuous illumination.

Screening of an efficient cholesterol-lowering strain of Lactiplantibacillus plantarum 54-1 and investigation of its degradation molecular mechanism.

In this study, an efficient cholesterol-lowering strain of Lactiplantibacillus plantarum 54-1 was screened and its degradation molecular mechanism was investigated. Furthermore, a novel practical MRS medium for screening cholesterol-lowering lactic acid bacteria (LAB) was developed based on ultrasound treatment. L. plantarum 54-1 was found to have the highest ability to eliminate cholesterol (340.69 ± 5.87 µg/mL). According to SEM and the count of viable LAB results, the morphology of LAB in the cholesterol-containing medium developed in this experiment was close to the normal (full and smooth), and it can grow normally. Metabolomics revealed that L. plantarum 54-1 initially converted a portion of cholesterol to 7α-hydroxy-cholesterol and then to the key metabolite taurine, via the phosphotransferase system. These metabolites were further transformed into L-alanine, L-lysine, N6-Acetyl-L-lysine, (R)-b-aminoisobutyric acid, and 2-oxoarginine, through glycine, serine, and threonine metabolism, citrate cycle, D-arginine and D-ornithine metabolism, lysine degradation, and pyruvate metabolism pathways. Prokaryotic reference transcriptomics found that this may be mainly regulated by the bsh, phnE, ptsP, B0667_RS04545, and B0667_RSRS12300 genes, which was further validated by qPCR. Furthermore, molecular docking results demonstrated that 8 differential metabolites might bind to another portion of cholesterol via PI-PI conjugation and hydrophobic interactions and lower cholesterol via co-sedimentation. This study has strategic implications for developing probiotic powder food that lowers cholesterol.

Astaxanthin nanoparticles ameliorate dextran sulfate sodium-induced colitis by alleviating oxidative stress, regulating intestinal flora, and protecting the intestinal barrier.

This study aimed to develop a novel astaxanthin nanoparticle using gum arabic (GA) and whey protein powder enriched with milk fat globule membranes (MFGM-WPI) as carriers and to investigate its effect and alleviation mechanism on colitis in mice. We demonstrated that MFGM-GA-astaxanthin could improve the bioaccessibility of astaxanthin and cope with oxidative stress more effectively in a Caco-2 cell model. In vivo studies demonstrated that MFGM-GA-astaxanthin alleviated colitis symptoms and repaired intestinal barrier function by increasing the expression of mucin 2, occludin, and zonula occludens-1. This was attributed to the alleviating effect of MFGM-GA-astaxanthin on oxidative stress. Moreover, MFGM-GA-astaxanthin restored the abnormalities of flora caused by dextran sulfate sodium, including Lactobacillus, Bacteroides, Ruminococcus, and Shigella. This study provides a basis for the therapeutic effect of astaxanthin nanoparticles on colon diseases.

Protection Mechanism of Metal Ion Pre-Stress on Lactobacillus acidophilus CICC 6074 under Acid Tolerance.

The prerequisite for the probiotic effect of lactic acid bacteria is that they could survive the acid stress environment of production and application. In this experiment, the mechanism for the effect of different metal ion pre-stress on the acid-tolerant survival of Lactobacillus was investigated. Scanning electron microscopy, Fourier infrared spectroscopy, and flow cytometry were used to analyze the condition of bacteria after acid treatment, which revealed that different metal ion pre-stress could improve the survival ability of Lactobacillus acidophilus CICC 6074 under low acid conditions by improving cell morphology, mitigating cell membrane damage, and regulating surface protein expression. Furthermore, Tandem Mass Tags (TMT) proteomic analysis revealed that Mn2+ pre-stress showed relatively more superior protective effects on acid tolerance in L. acidophilus CICC 6074 through activation of DNA replication, RNA synthesis, S-layer protein secretion, H+-ATPase enzyme activity, etc. This study will provide new ideas and a theoretical basis for the development and application of lactic acid bacteria.

Recent Progress in Interfacial Dipole Engineering for Perovskite Solar Cells.

Design and modification of interfaces have been the main strategies in developing perovskite solar cells (PSCs). Among the interfacial treatments, dipole molecules have emerged as a practical approach to improve the efficiency and stability of PSCs due to their unique and versatile abilities to control the interfacial properties. Despite extensive applications in conventional semiconductors, working principles and design of interfacial dipoles in the performance/stability enhancement of PSCs are lacking an insightful elucidation. In this review, we first discuss the fundamental properties of electric dipoles and the specific roles of interfacial dipoles in PSCs. Then we systematically summarize the recent progress of dipole materials in several key interfaces to achieve efficient and stable PSCs. In addition to such discussions, we also dive into reliable analytical techniques to support the characterization of interfacial dipoles in PSCs. Finally, we highlight future directions and potential avenues for research in the development of dipolar materials through tailored molecular designs. Our review sheds light on the importance of continued efforts in this exciting emerging field, which holds great potential for the development of high-performance and stable PSCs as commercially demanded.

Transportation of whey protein-derived peptides using Caco-2 cell model and identification of novel cholesterol-lowering peptides.

Background: The increasing morbidity and mortality of cardiovascular disease have become a major factor in human death. Serum cholesterol is considered to be an important risk factor for inducing coronary heart disease, atherosclerosis and other cardiovascular diseases. To screen intestinal absorbable functional small peptides with cholesterol-lowering activity by enzymatic hydrolysis of whey protein and develop cholesterol-based functional food that may become a substitute for chemically synthesized drugs, providing new ideas for diseases caused by high cholesterol. Objective: This study aimed to evaluate the cholesterol-lowering activity of intestinal absorbable whey protein-derived peptides hydrolyzed by alkaline protease, trypsin and chymotrypsin, respectively. Method: The whey protein hydrolysates acquired by enzymatic hydrolysis under optimal conditions were purified by a hollow fiber ultrafiltration membrane with a molecular weight cutoff of 10 kDa. The fractions obtained by Sephadex G-10 gel filtration chromatography were transported through a Caco-2 cell monolayer. The transported peptides were detected in the basolateral aspect of Caco-2 cell monolayers using ultra- performance liquid chromatography-tandem mass spectrometry (UPLC-MS). Results: His-Thr-Ser-Gly-Tyr (HTSGY), Ala-Val-Phe-Lys (AVFK) and Ala-Leu-Pro-Met (ALPM) were unreported peptides with cholesterol-lowering activity. The cholesterol-lowering activities of the three peptides did not change significantly during simulated gastrointestinal digestion. Conclusion: This study not only provides theoretical support for the development of bioactive peptides that can be directly absorbed by the human body, but also provides new treatment ideas for hypercholesterolemia.

Coherent dual-frequency signal generation in an optoelectronic oscillator.

Coherent dual-frequency microwave signal generation using an optoelectronic oscillator (OEO) is presented and demonstrated. In the proposed OEO, a dual-band bandpass filter (DB-BPF) is utilized to select two oscillation modes. An external signal is injected into the OEO loop with its frequency equaling the frequency interval of the two oscillation modes. Owing to the modulation nonlinearity of the Mach-Zehnder modulator, the two oscillation frequencies interact with the injection frequency. When the phase and gain conditions are satisfied within the loop, injection locking between the two oscillation signals will be established, and their phases will be synchronized. The effect of gain competition in the OEO loop, which leads to single-frequency oscillation, is suppressed. An experiment is carried out, and two frequencies, of 16.083 GHz and 9.998 GHz, are generated at the same time. The phase noise values are -140.1 and -141.0 dBc/Hz @ 10 kHz, respectively. The coherence between the generated signals and sidemode suppression performance are evaluated.

Variation of Charge Carrier Dynamics for Polycrystalline Perovskite Films by One-Step Solution and Vapor-Deposition Methods.

To date, solution-processing and vapor-deposition fabrication methods have achieved huge successes in high-efficiency perovskite solar cells (PSCs) and satisfy special demanding requirements for diverse application purposes, respectively. Although people realize that the fabrication procedure is crucial in device performance, insightful studies of charge carrier dynamics in perovskite films by different methods still lack. In this work, we compare the carrier behaviors in one-step spin-coated and dual-source coevaporated MAPbI3 perovskite films by combining time-resolved photoluminescence spectroscopy and carrier dynamics simulation. We suggest that strains, lattice orientations, and defects at buried side of perovskite films, which are associated with different preparation processes, lead to variations in carrier behaviors. Hence fabrication of perovskite layers should be elaborately designed in order to satisfy the needs of different carrier behaviors in specified device configurations of PSCs such as smooth planar or textured monolithic tandem structures.

How Do Surface Polar Molecules Contribute to High Open-Circuit Voltage in Perovskite Solar Cells?

To date, the improvement of open-circuit voltage (VOC ) offers a breakthrough for the performance of perovskite solar cells (PSCs) toward their theoretical limit. Surface modification through organic ammonium halide salts (e.g., phenethylammonium ions PEA+ and phenmethylammonium ions PMA+ ) is one of the most straightforward strategies to suppress defect density, thereby leading to improved VOC . However, the mechanism underlying the high voltage remains unclear. Here, polar molecular PMA+ is applied at the interface between perovskite and hole transporting layer and a remarkably high VOC of 1.175 V is obtained which corresponds to an increase of over 100 mV in comparison to the control device. It is revealed that the equivalent passivation effect of surface dipole effectively improves the splitting of the hole quasi-Fermi level. Ultimately the combined effect of defect suppression and surface dipole equivalent passivation effect leads to an overall increase in significantly enhanced VOC . The resulted PSCs device reaches an efficiency of up to 24.10%. Contributions are identified here by the surface polar molecules to the high VOC in PSCs. A fundamental mechanism is suggested by use of polar molecules which enables further high voltage, leading ways to highly efficient perovskite-based solar cells.

Multisite Percutaneous Bone Augmentation for the Treatment of Acetabular Osteolytic Metastases Involving the Articular Surfaces: A Randomised Trial.

INTRODUCTION: For patients with acetabular osteolytic metastases involving the articular surfaces, current treatments cannot efficiently rebuild the acetabular bone frame structure and strengthen bone defect area mechanics for weight-bearing. The purpose of this study is to show the operational procedure and clinical outcomes of multisite percutaneous bone augmentation (PBA) for the treatment of incidental acetabular osteolytic metastases involving the articular surfaces. METHODS: According to the inclusion and exclusion criteria, 8 patients (4 males and 4 females) were included in this study. Multisite (3 or 4 sites) PBA was successfully performed in all patients. The pain and function evaluation and imaging observation were examined by VAS and Harris hip joint function scores at the different time points (pre-procedure, 7 days, one month, last follow-up in 5-20 months). RESULTS: There were significant differences (p<0.05) in VAS and Harris scores before and after the surgical procedure. Moreover, these two scores had no obvious changes during the follow-up process (7 days after the procedure, one month after the procedure, and the last follow-up) after the procedure. CONCLUSION: The proposed multisite PBA is an effective and safe procedure for the treatment of acetabular osteolytic metastases involving the articular surfaces.

Effect of lentinan on gelling properties and structural changes of goose myofibrillar protein under oxidative stress.

BACKGROUND: The reduction of protein oxidation is important for maintaining the product quality of reconstituted meat. In this study, the dose-dependent effects of lentinan (LNT) on gelling properties and chemical changes in oxidatively stressed goose myofibrillar protein were investigated. RESULTS: Myofibrillar protein (MP) with 200 µmol g-1 protein LNT increased gel strength by 87.90 ± 9.26% in comparison with LNT-free myofibrillar protein after oxidation. Scanning electron microscopy analysis revealed that the gel network containing LNT was compact, with small pores and uniform distribution. The absolute value of the zeta potential reduced significantly following oxidation of LNT with 200 µmol g-1 protein at 4 °C for 12 h compared with the zeta potential without LNT, according to the laser particle size analyzer. The incorporation of LNT increased protein solubility and -SH content, inhibited carbonyl formation, enhanced α-helix content and tryptophan intrinsic fluorescence intensity, and reduced exposure of hydrophobic groups and protein aggregation. CONCLUSION: The results indicated that adding LNT to myofibrillar protein could improve gel. This is related to its protective effect on conformational changes in the oxidation system. Lentinan is therefore recommended for oxidatively stressed goose meat processing to enhance the MP gelling potential. © 2023 Society of Chemical Industry.

Isolation, identification, and characterization of corn-derived antioxidant peptides from corn fermented milk by Limosilactobacillus fermentum.

Dairy-derived peptides and corn-derived peptides have been identified as essential ingredients for health promotion in the food industry. The hydrolysis based on lactic acid bacteria (LAB) protease system is one of the most popular methods to prepare bioactive peptides. The objectives of this paper are to develop antioxidant fermented milk and to obtain natural antioxidant peptides. In our study, LAB with antioxidant capacity were screened in vitro, and the corn fermented milk with antioxidant capacity was achieved by the traditional fermentation method. Fermented milk was purified by ultrafiltration and molecular sieve, and identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Our findings demonstrate that Limosilactobacillus fermentum L15 had a scavenging capacity of more than 80% of DPPH radicals, Trolox equivalent antioxidant capacity (TEAC) of 0.348 ± 0.005 mmol/L. Meanwhile, the peptide content of corn fermented milk prepared with L. fermentum L15 was 0.914 ± 0.009 mg/mL and TAEC of 0.781 ± 0.020 mmol/L. Particularly important, IGGIGTVPVGR and LTTVTPGSR isolated and extracted from fermented milk were found to have antioxidant capacity for the first time. The synthetic peptides IGGIGTVPVGR and LTTVTPGSR demonstrated a scavenging capacity of 70.07 ± 2.71% and 70.07 ± 2.77% for DPPH radicals and an antioxidant capacity of 0.62 ± 0.01 mmol/L and 0.64 ± 0.02 mmol/L Trolox equivalent, respectively. This research provides ideas and basis for the development and utilization of functional dairy products.

Fully Textured, Production-Line Compatible Monolithic Perovskite/Silicon Tandem Solar Cells Approaching 29% Efficiency.

Perovskite/silicon tandem solar cells are promising avenues for achieving high-performance photovoltaics with low costs. However, the highest certified efficiency of perovskite/silicon tandem devices based on economically matured silicon heterojunction technology (SHJ) with fully textured wafer is only 25.2% due to incompatibility between the limitation of fabrication technology which is not compatible with the production-line silicon wafer. Here, a molecular-level nanotechnology is developed by designing NiOx /2PACz ([2-(9H-carbazol-9-yl) ethyl]phosphonic acid) as an ultrathin hybrid hole transport layer (HTL) above indium tin oxide (ITO) recombination junction, to serve as a vital pivot for achieving a conformal deposition of high-quality perovskite layer on top. The NiOx interlayer facilitates a uniform self-assembly of 2PACz molecules onto the fully textured surface, thus avoiding direct contact between ITO and perovskite top-cell for a minimal shunt loss. As a result of such interfacial engineering, the fully textured perovskite/silicon tandem cells obtain a certified efficiency of 28.84% on a 1.2-cm2 masked area, which is the highest performance to date based on the fully textured, production-line compatible SHJ. This work advances commercially promising photovoltaics with high performance and low costs by adopting a meticulously designed HTL/perovskite interface.

Fermented milk of cheese-derived Lactobacillus delbrueckiisubsp.bulgaricus displays potentials in alleviating alcohol-induced hepatic injury and gut dysbiosis in mice.

An isolate of Lactobacillus delbrueckii subsp. bulgaricus (L. bulgaricus L7) with robust antioxidant capacity was screened from traditional fermented Xinjiang cheese. Here, we focused on evaluating the effect of L. bulgaricus fermented milk on acute alcoholic liver disease prevention using a mice model, with glutathione treated mice as positive control. The results showed that both fermented milk and glutathione feeding could relieve alcohol-induced oxidative stress and inflammatory responses significantly. However, fermented milk feeding seemed to hold more promise in restoring gut dysbiosis relative to glutathione. Enhanced abundance of potential pathogens, Porphyromonas sp. and Enterococcus sp., induced by alcohol was considerably attenuated by additional feeding of fermented milk. Different scenario was firstly observed when additionally fed with glutathione in this study, showing remarkably increased abundance of Bacteroides sp. and Enterococcus sp. Our results suggested the more robust capability of L. bulgaricus fermented milk in restoring alcohol-induced gut dysbiosis relative to glutathione, indicating its potential protective effects on alcohol-induced hepatic injury.

Pre-Buried Additive for Cross-Layer Modification in Flexible Perovskite Solar Cells with Efficiency Exceeding 22.

Halide perovskites have shown superior potentials in flexible photovoltaics due to their soft and high power-to-weight nature. However, interfacial residual stress and lattice mismatch due to the large deformation of flexible substrates have greatly limited the performance of flexible perovskite solar cells (F-PSCs). Here, ammonium formate (HCOONH4 ) is used as a pre-buried additive in electron transport layer (ETL) to realize a bottom-up infiltration process for an in situ, integral modification of ETL, perovskite layer, and their interface. The HCOONH4 treatment leads to an enhanced electron extraction in ETL, relaxed residual strain and micro-strain in perovskite film, along with reduced defect densities within these layers. As a result, a top power conversion efficiency of 22.37% and a certified 21.9% on F-PSCs are achieved, representing the highest performance reported so far. This work links the critical connection between multilayer mechanics/defect profiles of ETL-perovskite structure and device performance, thus providing meaningful scientific direction to further narrowing the efficiency gap between F-PSCs and rigid-substrate counterparts.