Iron-copper bimetallic photo-Fenton system promoted photothermal-hydrogen peroxide production for efficient low-temperature wastewater treatment.

Enhancing the velocity of the oxidation-reduction cycle is crucial for improving the catalytic efficiency of Fenton processes. Therefore, the development of an effective strategy for wastewater degradation at low temperatures is essential. In this context, we present the preparation of an NH2-MIL-88B (Fe)/CuInS2 S-scheme heterojunction. Specifically, CuInS2 nanoparticles are introduced onto the Ferro-organic skeleton, resulting in the exposure of a significant number of active surface sites. Furthermore, NH2-MIL-88B (Fe)/CuInS2 demonstrates an extended photoresponse into the long-wavelength region, which contributes to its excellent photothermal properties. Notably, the degradation rate of tetracycline in low-temperature aqueous environments reaches as high as 99.7 %, several times higher than that of the original sample. Additionally, the hydrogen production of NH2-MIL-88B (Fe)/CuInS2 is 2.23 times that of single NH2-MIL-88B (Fe) and 3.46 times that of single CuInS2. Moreover, the system exhibits good H2O2 evolution performance, forming an efficient photo-Fenton system. The charge transfer process in S-scheme heterojunction is confirmed using in-situ X-ray photoelectron spectroscopy and electron paramagnetic resonance. Both transient photoluminescence and photo electrochemical tests further validate the enhanced photoelectrochemical properties of the NH2-MIL-88B (Fe)/CuInS2 S-scheme heterojunction. The exceptional performance of this system can be attributed to the synergistic effects of the S-scheme heterojunction and the bimetallic codoped photo-Fenton system. This research presents a novel approach for the breakdown of low-temperature wastewater using an improved photocatalytic Fenton system.

Human ß-casein-derived peptide BCCY-1 improved the intestinal barrier integrity by regulating the TLR4/eNOS/3-Nitrotyrosine axis.

Necrotizing enterocolitis (NEC) is a lethal gastrointestinal disease affecting premature infants. Although earlier studies have highlighted protective effects of milk-derived peptides against NEC, the role of the human ß-casein-derived peptide BCCY-1 in intestinal barrier protection has never been investigated. Here, we showed that BCCY-1 alleviated the phenotype of NEC, reduced intestinal expression of Toll-like receptor 4 (TLR4) and interleukin-6, and improved the intestinal barrier integrity. NEC-associated multi-organ injury and impaired bone marrow hematopoiesis were also attenuated by BCCY-1. Metabolic screening revealed significant changes in intestinal metabolites in the NEC and NEC + BCCY-1 groups. Further analysis disclosed inhibition of 3-Nitrotyrosine formation due to the preservation of endothelial nitric oxide synthase (eNOS) activity, which was associated with the interactions between BCCY-1 and lipopolysaccharides, leading to disruption of TLR4 signaling. Our findings suggested that BCCY-1 improved intestinal barrier integrity through modulating the TLR4/eNOS/3-Nitrotyrosine axis, highlighting its potential role in the maintenance of intestinal health.

Near-infrared fluorescent probe visual detection of Hg2+ and its application in biological system and ecological system.

Mercury ion (Hg2+), a heavy metal cation with greater toxicity, is widely present in the ecological environment and has become a serious threat to human health and environmental safety. Currently, developing a solution to simultaneously visualize and monitor Hg2+ in environmental samples, including water, soil, and plants, remains a great challenge. In this work, we created and synthesized a near-infrared fluorescent probe, BBN-Hg, and utilized Hg2+ to trigger the partial cleavage of the carbon sulfate ester in BBN-Hg as a sensing mechanism, and the fluorescence intensity of BBN-Hg was significantly enhanced at 650 nm, thus realizing the visualization of Hg2+ with good selectivity (detection limit, 53 nM). In live cells and zebrafish, the probe BBN-Hg enhances the red fluorescence signal in the presence of Hg2+, and successfully performs 3D imaging on zebrafish, making it a powerful tool for detecting Hg2+ in living systems. More importantly, with BBN-Hg, we are able to detect Hg2+ in actual water samples, soil and plant seedling roots. Furthermore, the probe was prepared as a test strip for on-site determination of Hg2+ with the assistance of a smartphone. Therefore, this study offers an easy-to-use and useful method for tracking Hg2+ levels in living organisms and their surroundings.

Inhibitory effects of nitrite and sulfite/peroxymonosulfate on bacteria are mediated respectively through respiration and intracellular GSH homeostasis.

As nitrite, sulfite has been used in food preservation for centuries but how it inhibits bacterial growth remains underexplored. To address this issue, in this study, we set out to test if cytochrome (cyt) c proteins protect bacteria from the damage of certain reactive sulfur species (RSS) because they do so in the case of reactive nitrogen species (RNS). We show that some reactive sulfur species, such as sulfite and peroxymonosulfate (PMS), inhibit growth of bacterial strains devoid of cytochrome (cyt) c proteins. Subsequent investigations link the inhibition of sulfite/PMS to activity of cbb3-type heme-copper oxidase (cbb3-HCO). However, in vitro comparative analysis rules out that either cbb3-HCO or cyt bd oxidase is the primary target of sulfite/PMS. Instead, we found that sulfite/PMS and the cbb3-HCO loss regulate intracellular redox status in a similar manner, by affecting GSH/GSSG homeostasis. The link between the GSH/GSSG homeostasis and sulfite/PMS is further substantiated by using the mutants with enhanced GSSG generation. Furthermore, we present the data to show that inhibitory effects of nitrite and sulfite/PMS are additive although the overall effects may vary depending on species. Our results open an avenue to control bacteria by developing more robust agents that modulating intracellular redox status, which may be used in combination with nitrite as a promising antimicrobial strategy.

Effect of iron-manganese oxide on the degradation of deoxynivalenol in feed and enhancement of growth performance and intestinal health in weaned piglets.

Deoxynivalenol (DON), a prevalent and highly toxic mycotoxin in animal feed, poses significant risks to livestock health and productivity. This study evaluates the effectiveness of iron-manganese oxide (Fe/Mn oxides) in degrading DON. The DON degradation rate of Fe/Mn oxide reached 98.46 % in a controlled solution under specific conditions (0.2 % concentration, 37-85 °C, pH 6-7, 1-minute reaction time). When applied to actual feed, it reduced DON levels by approximately 49.3 % and remained stable in simulated gastrointestinal environments of weaned piglets. A 28-day trial involving 48 weaned piglets assessed the impacts of Fe/Mn oxides on health and growth. Results indicated that piglets consuming contaminated feed without the treatment exhibited reduced growth and compromised gut integrity, which were significantly mitigated by the addition of Fe/Mn oxides. Therefore, Fe/Mn oxides effectively reduce DON in feed and alleviate adverse health effects in piglets, making them a viable option to enhance safety and performance in mycotoxin-prone environments.

Spatial pattern and compositional distribution of organochlorine pesticides in the black soil region of Shenyang.

Organochlorine pesticides (OCPs) are persistent organic pollutants (POPs) prevalent in soils with carcinogenic, teratogenic and mutagenic hazards that are commonly found in soils and remain in the environment even though they have been banned. In order to fill the gap of fewer studies after the ban, soil samples were collected from 308 agricultural fields of cash crops and grain crops in the black soil area of Shenyang City (Liaozhong District, Faku County, Xinmin City and Kangping County) in this study. The aim was to determine, the use and distribution characteristics of OCPs in agricultural soils in the black soil region of Shenyang City. Compositional analysis showed that the detection rate of banned OCPs in agricultural soils was 71.75%, including contaminants such as technical dichloro-diphenyl-trichloroethane (DDT), chlordane and hexachlorobenzene (HCB), which were widely distributed in Liaozhong District, Faku County, Xinmin City and Kangping County, with 45.25% of the fields having compounded contamination of OCPs, and several areas were involved in the fresh inputs of contaminants such as technical DDT. Among them, Kangping County and Faku County are more seriously polluted, with 66.29% and 60.71% of OCPs exceeding the standard. Soil OCPs is more serious in cabbage and rice farmland among cash and food crop farmland. Based on Chinese policy on control, prevention and other pesticide management measures, it was concluded that the framework should be strengthened to prevent further illegal use of banned OCPs.

Spatial heterogeneity of infiltrating immune cells in the tumor microenvironment of non-small cell lung cancer.

Tumor-infiltrating lymphocytes (TILs) are essential components of the tumor microenvironment (TME) of non-small cell lung cancer (NSCLC). Still, it is difficult to describe due to their heterogeneity. In this study, five cell markers from NSCLC patients were analyzed. We segmented tumor cells (TCs) and TILs using Efficientnet-B3 and explored their quantitative information and spatial distribution. After that, we simulated multiplex immunohistochemistry (mIHC) by overlapping continuous single chromogenic IHCs slices. As a result, the proportion and the density of programmed cell death-ligand 1 (PD-L1)-positive TCs were the highest in the core. CD8+ T cells were the closest to the tumor (median distance: 41.71 µm), while PD-1+T cells were the most distant (median distance: 62.2µm), and our study found that most lymphocytes clustered together within the peritumoral range of 10-30 µm where cross-talk with TCs could be achieved. We also found that the classification of TME could be achieved using CD8+ T-cell density, which is correlated with the prognosis of patients. In addition, we achieved single chromogenic IHC slices overlap based on CD4-stained IHC slices. We explored the number and spatial distribution of cells in heterogeneous TME of NSCLC patients and achieved TME classification. We also found a way to show the co-expression of multiple molecules economically.

Phase Distribution Dictates Charge Transfer and Transport Dynamics in Layered Quasi-2D Perovskite.

Strategic manipulation of spatiotemporal evolution of charge carriers is critical for optimizing performance of quasi-two-dimensional (2D) perovskite-based optoelectronic devices. Nonetheless, the inhomogeneous phase distribution and band alignment engender intricate energy landscapes, complicating internal charge and energy funneling processes. Herein, we integrate high spatiotemporal resolution transient absorption microscopy with multiple time-resolved spectroscopy and find that asynchronous electron and hole transfers rather than direct energy transfer govern the funneling mechanisms. Notably, the charge funneling pathways and transport behaviors can be modifiable by phase manipulation. The accumulation of small-n phases suppresses the electron funneling toward large-n phases and doubles the carrier diffusion rate from 0.085 to 0.20 cm2/s, yielding a 1.5-fold enhancement in diffusion length. Phase order engineering is further corroborated for facilitating charge separation. Our investigation underscores the prospects of manipulating the phase distribution to control internal charge funneling and transport, thereby substantiating the theoretical foundations for optimizing optoelectronic devices.

Efficient photocatalytic degradation of microplastics by constructing a novel Z-scheme Fe-doped BiO2-x/BiOI heterojunction with full-spectrum response: Mechanistic insights and theory calculations.

Recently, microplastics (MPs) have garnered significant attention as a challenging emerging pollutant to address. Here, a full-spectrum light-driven Fe-doping BiO2-x/BiOI (FBI) Z-scheme heterojunction was constructed for efficiently degrading MPs in waters. Compared with BiO2-x, Fe doping BiO2-x, and BiOI, the optimal photocatalyst (40-FBI) can cause deep cracks in the polyethylene terephthalate (PET) within 10 h under the irradiation of full-spectrum light. Meanwhile, FT-IR characterization revealed that the absorption peak intensities of the C-O group, CO group, -CH stretching vibration, and -OH group on the MPs surface gradually increased with degradation time. A series of experiments and theory calculations revealed that the introduction of Fe creates impurity levels, accelerating the separation of photo-generated carriers and reducing the work function of BiO2-x, thereby enhancing the transport of photo-generated carriers between Z-scheme heterojunctions. This study offers a valuable idea for designing an efficient photocatalyst by simultaneously introducing ion doping and constructing heterojunctions for enhancing MPs degradation.

Regulation of Sensitized Phosphorescence in Two-Dimensional Lead Bromine Perovskites by Tuning Excited-State Interactions.

Excited-state interactions within the organic layer play a critical role in sensitized phosphorescence of two-dimensional (2D) perovskites. Herein, we regulate excited-state interactions utilizing isomeric organic ligands 1-naphthylmethylamine (1-NMA) and 1-(2-naphthyl)-methanamine (2-NMA). Transient absorption and first-principles calculations are employed to elucidate the mechanisms of triplet energy transfer (TET) and triplet excimer formation. The results indicate that wave function hybridization and tunneling effect at the inorganic/organic interface contribute to rapid (∼20 ps) and highly efficient (>98%) TET, with the triplet excimer being generated in (1-NMA)2PbBr4 at picosecond time-scale. However, triplet excimer is barely observed in (2-NMA)2PbBr4 due to varying ligand stacking modes. Despite rapid TET, the efficiency of sensitized phosphorescence is low (<0.5%), which is ascribed to pronounced nonradiative decay. By mixing isomeric ligands and optimizing respective ratio, a maximum phosphorescence enhancement of 7.6 folds is achieved. This work provides a detailed mechanistic understanding of triplet excimer sensitization and regulation of sensitized phosphorescence.

Efficacy and safety of perioperative immunotherapy combinations for resectable non-small cell lung cancer: a systematic review and network meta-analysis.

INTRODUCTION: Several trials of perioperative immunotherapy for resectable non-small cell lung cancer (NSCLC) reported positive results. They were designed to adjuvant, neoadjuvant and sandwich (neoadjuvant plus adjuvant) immunotherapy with immune checkpoint inhibitors and chemotherapy (CT). The differences between neoadjuvant and sandwich modalities were unclear. METHOD: We performed a systematic review and Bayesian network meta-analysis by retrieving relevant literature from PubMed, EMBASE, Cochrane Library, Web of Science, ClinicalTrials.gov, WHO ICTRP and major international conferences. RESULTS: We analyzed 8 studies involving 3429 patients, including 6 neoadjuvant plus adjuvant (Neo-Adj) and 2 neoadjuvant (Neo) trials. Neo-Adj had better event-free survival (EFS) (hazard ratio [HR] = 0.57, 95% confidence interval [CI]: 0.45-0.71) than CT. There existed no difference between Neo-Adj and Neo in EFS (HR = 0.87, 95% CI: 0.53-1.46) and overall survival (OS) (HR = 1.04, 95% CI: 0.38-2.57). Neo might have lower incidence of treatment-related adverse events (TRAEs) (relative risk [RR] = 0.96, 95% CI: 0.87-1.12) than Neo-Adj. Subgroup analysis of PD-L1 ≥ 50% suggested that EFS of Neo-Adj (HR = 0.46, 95% CI: 0.27-0.76) and Neo (HR = 0.24, 95% CI: 0.06-0.89) was better than CT, and Neo-Adj potentially caused shorter EFS than Neo (HR = 1.92, 95% CI: 0.46-7.84). CONCLUSIONS: Our results suggest that Neo-Adj and Neo have similar EFS for patients with PD-L1 < 1% or 1-49%. However, patients with PD-L1 ≥ 50% may obtain more EFS benefit from Neo than Neo-Adj. Neo might present a more favorable assessment than Neo-Adj when evaluating OS. Moreover, adding adjuvant immunotherapy may increase toxicity.

Applying machine learning and genetic algorithms accelerated for optimizing ethanol production.

Corn straws can produce bioethanol via simultaneous saccharification and co-fermentation (SSCF). However, identifying optimal combinations of operating parameters from numerous possibilities through a cost-effective strategy to improve SSCF efficiency and yield remains challenging. The eXtreme Gradient Boost (XGB) and deep neural network (DNN) models were constructed to accurately predict ethanol yield from only five input variables, achieving >83 % accuracy. Subsequently, the XGB and the DNN models were merged with the genetic algorithm (GA) as the new optimization strategies. Experimental validation showed that the new strategy optimize the efficiency and yield of the SSCF ethanol production system quickly and accurately. Moreover, the potential optimization mechanism was investigated through the comprehensive interpretability analysis for XGB and the microbial ecology analysis. Enzyme Solution Volume (61.7 %) dominated, followed by time (12.9 %), substrate concentration (10.4 %), temperature (7.7 %), and inoculum volume (7.3 %). This efficient and accurate algorithm design strategy can significantly reduce the time required to optimize biochemical systems.

The JNK/P38 signalling pathway activated by testin protects the intestinal epithelial barrier against Crohn's disease-like colitis.

The unknown mechanism that controls intestinal barrier dysfunction in individuals with Crohn's disease (CD) plays a crucial role in the onset of intestinal inflammation. Testin, an intercellular linker protein, has the potential to protect epithelial barrier function. This study aimed to analyse the effects of Testin on CD-like colitis and explore the possible underlying mechanism. Colon samples from CD patients and trinitrobenzene-sulfonic acid (TNBS)-treated mice were collected to examine changes in Testin expression. To assess the therapeutic effects of Testin on CD-like colitis in mice, we examined the symptoms of enteritis, performed histological analysis, and evaluated intestinal barrier permeability. The ability of Testin to stabilize tight junction (TJ) proteins was investigated via immunofluorescence and western blotting. We conducted in vivo and in vitro experiments using colonic organoids and blocking techniques to explore how Testin safeguards the integrity of the intestinal barrier. Testin expression was downregulated in the colons of CD patients and TNBS-treated mice. Increasing Testin expression led to amelioration of colitis symptoms and reduced the production of inflammatory cytokines in the colons of TNBS-induced colitis model mice. Furthermore, increased Testin expression resulted in decreased depletion of TJ proteins (ZO-1 and Claudin-1) and promoted the effectiveness of the intestinal barrier in mice with TNBS-induced colon damage and in lipopolysaccharide (LPS)-stimulated colonic organoids. Elevated Testin levels inactivated the JNK/P38 signalling pathway, potentially contributing to the beneficial impact of Testin on the intestinal barrier. Testin can inhibit the loss of TJ proteins in CD mice by inactivating the JNK/P38 pathway. These findings help to clarify how Testin alleviates CD-like colitis in mice by protecting intestinal barrier function. These findings could lead to the use of a new treatment approach for CD in clinical practice.

Development of Controllable Hetero-Pauson-Khand Polymerization to Functional Stimuli-Responsive Poly(γ-lactam)s.

Polymers containing lactam structures play a crucial role in both natural biological systems and human life, and their synthesis, functions and applications are of utmost importance for biomimetics and the creation of new materials. In this study, we developed an efficient heterogeneous Pauson-Khand polymerization (h-PKP) method for the controlled synthesis of main-chain poly(γ-lactam)s containing α, ß-unsaturated γ-lactam functionalities using readily available internal alkynes and imines. The molecular weights of the resulting poly(N-Ts/γ-lactam)s can be precisely controlled by adjusting the ratio of phenyl formate and nickel. These polymers exhibit high solid-state luminescence and demonstrate rapid and sensitive dual responsiveness to light and acid stimuli. They further demonstrate strong reactive oxygen species (ROS) generation capability. The unique dual-emission peaks observed in poly(N-H/γ-lactam)s obtained through post-treatment under acidic conditions demonstrate a mechanism of aggregation-induced intermolecular excited-state proton transfer specific to lactam structures. The efficient one-pot synthetic method for poly(γ-lactam) provides a novel strategy for constructing polymers with γ-lactam structures in the main chain and the simple and efficient post-modification method offer a versatile toolbox for functionalizing poly(γ-lactam)s to expand their potential applications.

Acene-Integrated Buckybowls with Near-Infrared II Absorption and over 90 % Photothermal Conversion Efficiency.

Tetracene and pentacene are large, promising building blocks for construction of complex molecular nanocarbons due to their extraordinary photophysical and electronic properties. Herein, two acene-integrated buckybowls, composed of two rows of tetracenes and pentacenes fused through s-indacene unit at the zigzag edges, have been synthesized and characterized. Compared to parent tetracene and pentacene, the buckybowls are extremely stable and show much smaller electrochemical band gaps. Kinetic studies gave the bowl-to-bowl inversion barriers of 11.7 and 13.3 kcal mol-1. Subsequent investigations on magnetic ring currents revealed two local diatropic currents at two rows of acenes and one paratropic current at the s-indacene unit, respectively. Notably, both buckybowls show a broad absorption that reaches into near-infrared II region, and a high photothermal conversion efficiency (>90 %) was achieved when exposed to near-infrared 1064 nm laser photo-irradiation. This study highlights the unusual nature of merging the intrinsic properties of acenes with the inherent properties of buckybowls and showcases a potential avenue for acene utilization for the design of novel complex nanocarbons with a broad range of applications.

π-extended pyrenes: from an antiaromatic buckybowl to doubly curved nanocarbons with gulf architectures.

The synthesis of π-extended pyrenes keeps attracting considerable attention. In particular, frameworks containing nonbenzenoid rings might display intriguing properties. Here, we report a practical synthetic pathway to access a new buckybowl (1), which is composed of four five-membered rings externally fused to a pyrene core. The buckybowl 1 exhibits antiaromaticity involving 22 π-electrons, a rapid bowl-to-bowl interconversion, and a small band gap. Furthermore, this buckybowl could be subjected to Scholl cyclodehydrogenation to prepare the doubly curved nanocarbons (2rac and 2meso), which exist as two diastereomers, as demonstrated by X-ray crystal structure determination. Variable temperature 1H NMR measurements reveal that 2meso can isomerize into 2rac under thermal conditions, with an activation free energy of 27.1 kcal mol-1. Both the enantiomers of 2rac can be separated by chiral HPLC and their chiroptical properties are thoroughly examined. In addition, the nanocarbon 2meso with two gulf architectures facilitates host-guest chemistry with a variety of guests, including PDI, TDI, C60 and C70.

Investigation of Interferences of Wearable Sensors with Plant Growth.

Plant wearable sensors have shown exceptional promise in continuously monitoring plant health. However, the potential adverse effects of these sensors on plant growth remain unclear. This study systematically quantifies wearable sensors' interference with plant growth using two ornamental species, Peperomia tetraphylla and Epipremnum aureum. We evaluated the impacts of four common disturbances-mechanical pressure, hindrance of gas exchange, hindrance of light acquisition, and mechanical constraint-on leaf growth. Our results indicated that the combination of light hindrance and mechanical constraint demonstrated the most significant interference. When the sensor weight was no greater than 0.6 g and the coverage was no greater than 5% of the leaf area, these four disturbances resulted in slight impacts on leaf growth. Additionally, we fabricated a minimally interfering wearable sensor capable of measuring the air temperature of the microclimate of the plant while maintaining plant growth. This research provides valuable insights into optimizing plant wearable sensors, balancing functionality with minimal plant interference.

Rapid elimination of scattering in three-dimensional fluorescence spectra via deep learning.

Three-dimensional fluorescence spectra are often affected by scattering effects, traditional scattering elimination methods rely excessively on parameter settings and cannot automatically eliminate scattering in batches, thereby limiting the application of fluorescence spectroscopy technology in rapid online monitoring and analysis of samples. In this study, we have developed a model based on a deep learning CycleGAN to rapidly eliminate scattering from three-dimensional fluorescence spectra. The proposed model efficiently eliminates scattering by simply inputting single or batches of contaminated fluorescent spectra. By training the CycleGAN using a large dataset of simulated three-dimensional fluorescence spectra and employing data augmentation, to the model can transform fluorescence spectra with scattering into ones without scattering. To validate the effectiveness of the proposed methed, we confirmed its generalization and reliability by eliminating scattering from two sets of previously unseen real experimental three-dimensional fluorescence spectra. We evaluated the effectiveness of scattering elimination across various noise levels and scattering widths, using metrics such as the mean absolute error, peak signal-to-noise ratio, structural similarity and cosine similarity. Furthermore, we conducted a component analysis using PARAFAC on the spectra post-scattering elimination, yielding correlation coefficients of >0.97 when compared to that in case of actual components. Finally, we compared the proposed model with traditional mathematical methods, such as blank subtraction and Delaunay triangulation. Results showed that the proposed model can automatically and efficiently eliminate scattering from fluorescence spectra in batches, substantially improving the efficiency of scattering elimination.

Effect of Industrial Byproduct Gypsum on the Mechanical Properties and Stabilization of Hazardous Elements of Cementitious Materials: A Review.

Industrial byproduct gypsum (BPG) is a secondary product that is mainly composed of calcium sulfate discharged during industrial production. BPG primarily consists of desulfurized gypsum, phosphogypsum, and titanium gypsum, which account for 88% of the total BPG in China. The large-scale utilization of these three types of solid waste is crucial for the safe disposal of BPG. BPG contains various impurities and harmful elements, limiting its applications. The continuous accumulation of BPG poses a serious threat to the safety of the environment. Based on a literature review (2021-2023), it was found that 52% of BPG is used in the preparation of cementitious materials, and the addition of BPG results in an average improvement of 7-30% in the mechanical properties of cementitious materials. Moreover, BPG has a positive impact on the immobilization of hazardous elements in raw materials. Therefore, the utilization of BPG in cementitious materials is beneficial for its large-scale disposal. This study primarily reviews the effects and mechanisms of BPG on the mechanical properties of cementitious materials and the solidification of hazardous elements. Most importantly, the review reveals that BPG positively influences the hydration activity of silica-alumina-based solid waste (such as steel slag and blast furnace slag) and alkaline solid waste (such as carbide slag and red mud). This improves the proportion of solid waste in cement and reduces production costs and carbon emissions. Finally, this article summarizes and proposes the application of BPG in cementitious materials. The application of BPG + silica-alumina solid waste + alkaline solid-waste-based cementitious materials is expected to realize a new type of green ecological chain for the joint utilization of multiple industrial solid wastes and to promote the low-carbon sustainable development of industrial clusters.

The Utilization of Carbonated Steel Slag as a Supplementary Cementitious Material in Cement.

Carbon emission reduction and steel slag (SS) treatment are challenges in the steel industry. The accelerated carbonation of SS and carbonated steel slag (CSS) as a supplementary cementitious material (SCM) in cement can achieve both large-scale utilization of SS and CO2 emission reduction, which is conducive to low-carbon sustainable development. This paper presents the utilization status of CSS. The accelerated carbonation route and its effects on the properties of CSS are described. The carbonation reaction of SS leads to a decrease in the average density, an increase in the specific surface area, a refinement of the pore structure, and the precipitation of different forms of calcium carbonate on the CSS surface. Carbonation can increase the specific surface area of CSS by about 24-80%. The literature review revealed that the CO2 uptake of CSS is 2-27 g/100 g SS. The effects of using CSS as an SCM in cement on the mechanical properties, workability, volume stability, durability, environmental performance, hydration kinetics, and microstructure of the materials are also analyzed and evaluated. Under certain conditions, CSS has a positive effect on cement hydration, which can improve the mechanical properties, workability, bulk stability, and sulfate resistance of SS cement mortar. Meanwhile, SS carbonation inhibits the leaching of heavy metal ions from the solid matrix. The application of CSS mainly focuses on material strength, with less attention being given to durability and environmental performance. The challenges and prospects for the large-scale utilization of CSS in the cement and concrete industry are described.