Serotonin suppresses intraspecific aggression in an agrobiont spider, Pardosa pseudoannulata, without affecting predation on insects.

Spiders are an abundant group of natural enemies preying on insect pests in agroecosystem. But their potential in biological control has not been fully realized due to difficult mass production. One hindrance is the intense intraspecific aggression in spiders. Neurotransmitters such as serotonin play important roles in modulating aggression. Here, we investigated the regulatory function of serotonin (5-hydroxytryptamine [5-HT]) signaling in the intraspecific aggression in a wandering spider Pardosa pseudoannulata (Araneae, Lycosidae). The aggression was quantified with 5 escalated aggression behaviors as approach, chasing, lunging, boxing, and biting. Virgin (VG) females exhibited higher aggression levels but less 5-HT content than post-reproductive (PR) females. Systemic increase of 5-HT via 5-HT injection decreased aggression, while decrease of 5-HT via RNA interference (RNAi) of the tryptophan hydroxylase gene, increased aggression. The involvement of the four 5-HT receptors were determined via individual or combined RNAi. Co-RNAi of the three 5-HT1 genes increased overall aggression with decreased incidents of approach, chasing, lunging, and increased biting. RNAi of 5-HT1B decreased approach and increased biting, whereas RNAi of 5-HT1A or 5-HT1C did not affect aggression. RNAi of 5-HT7 decreased approach only. Therefore, different 5-HT receptor types contribute to different aspects of the inhibitory effects of 5-HT on aggression and provide several pharmacological targets for manipulating spider aggression. 5-HT injection did not affect spiders' predation on their insect prey, the brown planthopper Nilaparvata lugens. The findings reveal 1 neuronal mechanism regulating intraspecific aggression in spiders and provide an insight in developing aggression suppression strategies for spider mass rearing.

Unraveling the Influence of Nafion Content on the Performance of Proton-Exchange Membrane Fuel Cells from the Perspective of Triple-Phase Boundary.

By combining molecular simulations and experimental measurements, the effect of the Nafion content on the performance of proton-exchange membrane fuel cells (PEMFCs) is explained from the perspective of the triple-phase boundary (TPB). The evaporation process of Nafion solvent is simulated on a triple-phase model to mimic the formation of the TPB, and the influence of the Nafion content on the TPB structure is investigated. When the Nafion content is 1.415 mg/m2, the coverages of Nafion on both Pt particles and the carbon carrier are saturated at 42.1% and 32.7%, respectively. With the increase of Nafion content, the amount of water molecules around Pt particles is increased, and the surrounding O2 content is decreased. The experimental PEMFC performance has confirmed such simulation results, which demonstrates a trend of enhancing first and then weakening with the increase of Nafion content and reaches a maximum with the Nafion content of 2.96 mg/m2. Therefore, the correlation between the structure of the TPB and the cell's efficiency has been established at a molecular level, enabling enhancements in the design of the TPB morphology and an increase in PEMFC efficiency.

In Situ-Grown Ultrathin Catalyst Layers for Improving both Proton Exchange Membrane Fuel Cell and Anion Exchange Membrane Fuel Cell Performances.

The mass transport and ion conductivity in the catalyst layer are important for fuel cell performances. Here, we report an in situ-grown ultrathin catalyst layer (UTCL) to reduce the oxygen mass transport and a surface ionomer-coated gas diffusion layer method to reduce the ion conducting resistance. A significantly reduced catalyst layer thickness (ca. 1 µm) is achieved, and coupled with the ionomer introduction method, the ultrathin catalyst layer is in good contact with the membrane, resulting in high ion conductivity and high Pt utilization. This ultrathin catalyst layer is suitable for both proton exchange membrane fuel cells and anion exchange membrane fuel cells, giving peak power densities of 2.24 and 1.11 W cm-2, respectively, which represent an increase of more than 30% compared with the membrane electrode assembly (MEA) fabricated by using traditional Pt/C power catalysts. Electrochemical impedance spectra and limiting current tests demonstrate the reduced charge transfer, mass transfer, and ohmic resistances in the ultrathin catalyst layer membrane electrode assembly, resulting in the promoted fuel cell performances.

Cognatishimia coralii sp. nov., a marine bacterium isolated from seawater surrounding corals.

Coral reefs are declining due to the rising seawater temperature. Bacteria within and surrounding corals play key roles in maintaining the homeostasis of the coral holobiont. Research on coral-related bacteria could provide benefits for coral reef restoration. During the isolation of coral-associated bacteria, a Gram-stain-negative, motile bacterium (D5M38T) was isolated from seawater surrounding corals in Daya Bay, Shenzhen, PR China. Phylogenetic analysis revealed that strain D5M38T represents a novel species in the genus Cognatishimia. The temperature range for strain D5M38T growth was 10-40 °C, and the optimum temperature was 37 °C. The salinity range for the growth of this isolate was from 0 to 4.0 %, with an optimal salinity level of 0.5 %. The pH range necessary for strain D5M38T growth was between pH 5.0 and 9.0, with an optimal pH being 7.5. The predominant fatty acid was summed feature 8 (65.0 %). The major respiratory quinone was Q-10. The DNA G+C content was 56.8 %. The genome size was 3.88 Mb. The average nucleotide identity (ANI), average amino acid identity (AAI) and digital DNA-DNA hybridization (dDDH) values between strain D5M38T and its two closest neighbours, Cognatishimia activa LMG 29900T and Cognatishimia maritima KCTC 23347T, were 73.2/73.6%, 73.2/73.6% and 19.7/19.5%, respectively. Strain D5M38T was clearly distinct from its closest neighbours C. activa LMG 29900T and C. maritima KCTC 23347T, with 16S rRNA gene sequence similarity values of 97.5 and 97.3 %, respectively. The phylogenetic analysis, along with the ANI, AAI, and dDDH values, demonstrated that strain D5M38T is a member of the genus Cognatishimia, and is distinct from the other two recognized species within this genus. The physiological, biochemical and chemotaxonomic characteristics also supported the species novelty of strain D5M38T. Thus, strain D5M38T is considered to be classified as representing a novel species in the genus Cognatishimia, for which the name Cognatishimia coralii sp. nov. is proposed. The type strain is D5M38T (=MCCC 1K08692T=KCTC 8160T).

An all-metallic nanovesicle for hydrogen oxidation.

Vesicle, a microscopic unit that encloses a volume with an ultrathin wall, is ubiquitous in biomaterials. However, it remains a huge challenge to create its inorganic metal-based artificial counterparts. Here, inspired by the formation of biological vesicles, we proposed a novel biomimetic strategy of curling the ultrathin nanosheets into nanovesicles, which was driven by the interfacial strain. Trapped by the interfacial strain between the initially formed substrate Rh layer and subsequently formed RhRu overlayer, the nanosheet begins to deform in order to release a certain amount of strain. Density functional theory (DFT) calculations reveal that the Ru atoms make the curling of nanosheets more favorable in thermodynamics applications. Owing to the unique vesicular structure, the RhRu nanovesicles/C displays excellent hydrogen oxidation reaction (HOR) activity and stability, which has been proven by both experiments and DFT calculations. Specifically, the HOR mass activity of RhRu nanovesicles/C are 7.52 A mg(Rh+Ru)-1 at an overpotential of 50 mV at the rotating disk electrode (RDE) level; this is 24.19 times that of commercial Pt/C (0.31 mA mgPt-1). Moreover, the hydroxide exchange membrane fuel cell (HEMFC) with RhRu nanovesicles/C displays a peak power density of 1.62 W cm-2 in the H2-O2 condition, much better than that of commercial Pt/C (1.18 W cm-2). This work creates a new biomimetic strategy to synthesize inorganic nanomaterials, paving a pathway for designing catalytic reactors.

Novel insights into the rhizosphere and seawater microbiome of Zostera marina in diverse mariculture zones.

BACKGROUND: Seagrasses offer various ecosystem services and possess high levels of primary productivity. However, the development of mariculture has affected the homeostasis of seagrass meadow ecosystems. Plant-microbiome associations are essential for seagrasses health, but little is known about the role of environmental microbiomes and how they affect seagrass in a mariculture environment. In this study, we investigated the influence of mariculture on the rhizosphere and seawater microbiome surrounding Zostera marina and focused on the bacterial, eukaryotic, and fungal components in the composition, diversity, metabolism, and responses to mariculture-related environmental factors. RESULTS: Significant differences in the composition, richness, diversity, and internal relations of the bacterial community between the seawater and rhizosphere sediment surrounding Z. marina were observed, while differences in the eukaryotic and fungal communities were less significant. More complex bacterial and fungal co-occurrence networks were found in the seawater and rhizosphere sediment of the Saccharina japonica (SJ) and sea cucumber (SC) culture zones. The seawater in the SJ zone had higher levels of dissimilatory and assimilatory nitrate reduction, denitrification, and nitrogen fixation processes than the other three zones. The assimilatory sulfate reduction enzymes were higher in the rhizosphere sediments of the SJ zone than in the other three zones. Tetracycline, sulfonamide, and diaminopyrimidine resistance genes were enriched in the mariculture SJ and SC zones. CONCLUSIONS: Our findings might contribute to a better understanding of the effects of mariculture on the seagrass and the meadow ecosystems and thus revealing their potential operating mechanisms. These insights may serve to raise awareness of the effects of human activities on natural ecosystems, regulation of antibiotic usage, and environmental restoration. Video Abstract.

Tuning the apparent hydrogen binding energy to achieve high-performance Ni-based hydrogen oxidation reaction catalyst.

High-performance platinum-group-metal-free alkaline hydrogen oxidation reaction catalysts are essential for the hydroxide exchange membrane fuel cells, which generally require high Pt loadings on the anode. Herein, we report a highly active hydrogen oxidation reaction catalyst, NiCuCr, indicated by the hydroxide exchange membrane fuel cell with a high peak power density of 577 mW cm-2 (18 times as high as the Ni/C anode) and a stability of more than 150 h (a degradation rate slower by 7 times than the Ni/C anode). The spectroscopies demonstrate that the alloy effect from Cu weakens the hydrogen binding, and the surface Cr2O3 species enhance the interfacial water binding. Both effects bring an optimized apparent hydrogen binding energy and thus lead to the high hydrogen oxidation reaction performance of NiCuCr. These results suggest that the apparent hydrogen binding energy determines the hydrogen oxidation reaction performance and that its tuning is beneficial toward high electrocatalytic performance.

Multi-omics analysis reveals the collaboration and metabolisms of the anammox consortia driven by soluble/non-soluble Fe(III) as the sole iron element.

Iron is recognized as a physiological requirement for anammox bacteria (AnAOB), with Fe(II) considered to be the most effective form. However, Fe(III), instead of Fe(II) is the common iron form in natural and artificial ecosystems. In this study, the nitrogen removal performance and metabolic mechanisms in anammox consortia with soluble and non-soluble Fe(III) as the sole iron element were investigated. After the 150-day operation, the soluble (FeCl3) and insoluble (Fe2O3) Fe(III)-fed anammox systems reached nitrogen removal rates of 71.84 ± 0.80% and 50.20 ± 0.98%, respectively. AnAOB could survive with soluble (FeCl3) or insoluble (Fe2O3) Fe(III) as the sole iron element, reaching relative abundances of 18.49% and 13.16%, respectively. The results show that the formation of anammox core consortia can enable AnAOB's survival to adverse external conditions of Fe(II) deficiency. Metagenomic and metatranscriptomic analysis reveal that Ca. Kuenenia can only uptake Fe(II) into the cell for metabolisms either independently through the extracellular electron transfer or with the cross-feeding of symbiotic microbes. This study provides insight into the utilization and metabolic mechanisms of Fe(III) in Ca. Kuenenia-dominated consortia, and deepens the understanding of anammox core consortia in the nitrogen, carbon, and iron cycling, further promoting the practical applications of anammox processes.

Neorhizobium turbinariae sp. nov., a coral-beneficial bacterium isolated from Turbinaria peltata.

Coral reef ecosystems are facing decline due to climate change, overfishing, habitat destruction and pollution. Bacteria play an essential role in maintaining the stability of coral reef ecosystems, influencing the well-being and fitness of coral hosts. The exploitation of coral probiotics has become an urgent issue. A short-rod shaped aerobic bacterium, designated NTR19T, was isolated in a healthy coral Turbinaria peltata from Daya Bay, Shenzhen, PR China. Its cells were Gram-negative, motile with a polar flagellum. The activities of catalase and oxidase were positive. Strain NTR19T grew at 10-41 °C (optimum, 28 °C), with NaCl concentrations of 0-4 % (w/v; optimum, 0.5 %) and at pH 5.0-9.5 (optimum, pH 7.0-7.5). The predominant fatty acids (>10 %) were summed feature 8 (57.6 %), C19 : 0 cyclo ω8c (12.6 %) and C16 : 0 (12.0 %). The polar lipids were diphosphatidylglycerol, phosphatidylglycerol, phospholipid and phosphatidylcholine. The major respiratory quinone was Q-10. The draft genome was 4.68 Mbp with 61.2 mol% DNA G+C content. In total, 4477 coding sequences were annotated and there were 64 RNA genes. The average nucleotide identity (ANI) and average amino acid identity (AAI) values between strain NTR19T and the related Neorhizobium species were 78.23-79.70% and 80.26-80.50 %, respectively. This strain encoded many proteins for the activities of catalase and oxidase in the genome. Strain NTR19T was clearly distinct from its closest neighbours Rhizobium oryzicola ACCC 05753T and Neorhizobium petrolearium ACCC 11238T with the 16S rRNA gene sequence similarity values of 96.86 and 96.36 %, respectively. The results of phylogenetic analysis, as well as ANI and AAI values, revealed that strain NTR19T belongs to Neorhizobium and was distinct from other species of this genus. The physiological, biochemical and chemotaxonomic characteristics also supported the species novelty of strain NTR19T. Thus, strain NTR19T is considered to be classified as a novel species in the genus Neorhizobium, for which the name Neorhizobium turbinariae sp. nov. is proposed. The type strain is NTR19T (=JCM 35342T=MCCC 1K07226T).

Engineering Molecular Heterostructured Catalyst for Oxygen Reduction Reaction.

Introducing a second metal species into atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts to construct diatomic sites (DASs) is an effective strategy to elevate their activities and stabilities. However, the common pyrolysis-based method usually leads to substantial uncertainty for the formation of DASs, and the precise identification of the resulting DASs is also rather difficult. In this regard, we developed a two-step specific-adsorption strategy (pyrolysis-free) and constructed a DAS catalyst featuring FeCo "molecular heterostructures" (FeCo-MHs). In order to rule out the possibility of the two apparently neighboring (in the electron microscopy image) Fe/Co atoms being dispersed respectively on the top/bottom surfaces of the carbon support and thus forming "false" MHs, we conducted in situ rotation (by 8°, far above the critical angle of 5.3°) and directly identified the individual FeCo-MHs. The formation of FeCo-MHs could modulate the magnetic moments of the metal centers and increase the ratio of low-spin Fe(II)-N4 moiety; thus the intrinsic activity could be optimized at the apex of the volcano-plot (a relationship as a function of magnetic moments of metal-phthalocyanine complexes and catalytic activities). The FeCo-MHs catalyst displays an exceptional ORR activity (E1/2 = 0.95 V) and could be used to construct high-performance cathodes for hydroxide exchange membrane fuel cells and zinc-air batteries.

Interfacial assembly of binary atomic metal-Nx sites for high-performance energy devices.

Anion-exchange membrane fuel cells and Zn-air batteries based on non-Pt group metal catalysts typically suffer from sluggish cathodic oxygen reduction. Designing advanced catalyst architectures to improve the catalyst's oxygen reduction activity and boosting the accessible site density by increasing metal loading and site utilization are potential ways to achieve high device performances. Herein, we report an interfacial assembly strategy to achieve binary single-atomic Fe/Co-Nx with high mass loadings through constructing a nanocage structure and concentrating high-density accessible binary single-atomic Fe/Co-Nx sites in a porous shell. The prepared FeCo-NCH features metal loading with a single-atomic distribution as high as 7.9 wt% and an accessible site density of around 7.6 × 1019 sites g-1, surpassing most reported M-Nx catalysts. In anion exchange membrane fuel cells and zinc-air batteries, the FeCo-NCH material delivers peak power densities of 569.0 or 414.5 mW cm-2, 3.4 or 2.8 times higher than control devices assembled with FeCo-NC. These results suggest that the present strategy for promoting catalytic site utilization offers new possibilities for exploring efficient low-cost electrocatalysts to boost the performance of various energy devices.

Atomic-thick metastable phase RhMo nanosheets for hydrogen oxidation catalysis.

Metastable phase two-dimensional catalysts provide great flexibility for modifying their chemical, physical, and electronic properties. However, the synthesis of ultrathin metastable phase two-dimensional metallic nanomaterials is highly challenging, mainly due to the anisotropic nature of metallic materials and their thermodynamically unstable ground-state. Here, we report free-standing RhMo nanosheets with atomic thickness and a unique core/shell (metastable phase/stable phase) structure. The polymorphic interface between the core region and shell region stabilizes and activates metastable phase catalysts; the RhMo Nanosheets/C shows excellent hydrogen oxidation activity and stability. Specifically, the mass activities of RhMo Nanosheets/C is 6.96 A mgRh-1; this is 21.09 times higher than that of commercial Pt/C (0.33 A mgPt-1). Density functional theory calculations suggest that the interface aids in the dissociation of H2 and the H species can then spillover to weak H binding sites for desorption, providing excellent hydrogen oxidation activity for RhMo nanosheets. This work advances the highly controlled synthesis of two-dimensional metastable phase noble metals and provides great directions for the design of high-performance catalysts for fuel cells and beyond.

Atomically Dispersed Zn-Pyrrolic-N4 Cathode Catalysts for Hydrogen Fuel Cells.

To achieve practical application of fuel cell, it is vital to develop highly efficient and durable Pt-free catalysts. Herein, we prepare atomically dispersed ZnNC catalysts with Zn-Pyrrolic-N4 moieties and abundant mesoporous structure. The ZnNC-based anion-exchange membrane fuel cell (AEMFC) presents an ultrahigh peak power density of 1.63 and 0.83 W cm-2 in H2 -O2 and H2 -air (CO2 -free), and also exhibits long-term stability with more than 120 and 100 h for H2 -air (CO2 -free) and H2 -O2 , respectively. Density functional calculations further unveil that the Zn-Pyrrolic-N4 structure is the origin of high activity of as-synthesized ZnNC catalyst, while the Zn-Pyridinic-N4 moiety is inactive for oxygen reduction reaction (ORR), which successfully explain the puzzle why most Zn-metal-organic framework -derived ZnNC catalysts in previous reports did not present good ORR activity because of their Zn-Pyridinic-N4 moieties. This work offers a new route for speeding up development of AEMFCs.

Shape-controlled hollow Cu2O@CuS nanocubes with enhanced photocatalytic activities towards degradation of tetracycline.

In view of recent advances in photodegradation of antibiotics, low cost and stable photocatalyst remain rare. In this article, shape-controlled Cu2O@CuS nanocubes with the larger specific surface area were successfully prepared via a simple template-engaged strategy. Cu2O nanocubes were synthesized through a reduction method as original templates, the core-shelled Cu2O@CuS nanocubes were formed by sulphuration with Na2S as sulphur source, and the Cu2O core can be incompletely removed by Na2S2O3 to generate the Cu2O@CuS nanoboxes. Herein, hierarchical nanoboxes with two-layered Cu2O@CuS were used as photocatalyst materials for photocatalytic degradation of tetracycline (TC). The obtained nanocubes manifested high specific surface area (39.65 m2 g-1) and large pore volume (12.3 cm3 g-1). The degradation performance for TC was investigated in detail, including the effect of parameters such as photocatalyst, pH and catalyst dosage. The results indicated that degradation efficiencies were higher than 90% under visible light. Moreover, the degradation efficiency was 71% after six times.

Nanocomposite of Conducting Polymer and Li Metal for Rechargeable High Energy Density Batteries.

The structure and electrochemical performance of lithium (Li) metal degrade quickly owing to its hostless nature and high reactivity, hindering its practical application in rechargeable high energy density batteries. In order to enhance the electrochemical reversibility of metallic Li, we designed a Li/Li2S-poly(acrylonitrile) (LSPAN) composite foil via a facile mechanical kneading approach using metallic Li and sulfurized poly(acrylonitrile) as the raw materials. The uniformly dispersed Li2S-poly(acrylonitrile) (Li2S-PAN) in a metallic Li matrix buffered the volume change on cycling, and its high Li ion conductivity enabled fast Li ion diffusion behavior of the composite electrode. As expected, the LSPAN electrode showed reduced voltage polarization, enhanced rate capability, and prolonged cycle life compared with the pure Li electrode. It exhibited stable cycling for 600 h with a symmetric cell configuration at 1 mA cm-2 and 1 mA h cm-2, far outperforming the pure metallic Li counterpart (400 h). Also, the LiCoO2||LSPAN full cells with a cathode mass loading of ∼16 mg cm-2 worked stably for 100 cycles at 0.5 C with a high capacity retention of 96.5%, while the LiCoO2||Li full cells quickly failed within only 50 cycles.

A yellow-emitting carbon quantum dot-based fluorescent logic gate for the continuous detection of Au3+ and biothiols.

Yellow-emitting carbon quantum dots, named Y-CQDs, were synthesized from O-phenylenediamine and ethylene glycol via a one-pot hydrothermal method. A fluorescent IMPLICATION logic gate for the continuous and "on-off-on" detection of Au3+ and biothiols in tap water at the nanoscale level was constructed based on these QDs. It showed promise in real sample detection and also as a fluorescent ink.

Genetic mutations and molecular mechanisms of Fuchs endothelial corneal dystrophy.

BACKGROUND: Fuchs endothelial corneal dystrophy is a hereditary disease and the most frequent cause of corneal transplantation in the worldwide. Its main clinical signs are an accelerated decrease in the number of endothelial cells, thickening of Descemet's membrane and formation of guttae in the extracellular matrix. The cornea's ability to maintain stromal dehydration is impaired, causing painful epithelial bullae and loss of vision at the point when the amount of corneal endothelial cells cannot be compensated. At present, apart from corneal transplantation, there is no other effective treatment that prevents blindness. MAIN TEXT: In this review, we first summarized the mutations of COL8A2, TCF4, TCF8, SLC4A11 and AGBL1 genes in Fuchs endothelial corneal dystrophy. The molecular mechanisms associated with Fuchs endothelial corneal dystrophy, such as endoplasmic reticulum stress and unfolded protein response pathway, oxidative stress, mitochondrial dysregulation pathway, apoptosis pathway, mitophagy, epithelial-mesenchymal transition pathway, RNA toxicity and repeat-associated non-ATG translation, and other pathogenesis, were then explored. Finally, we discussed several potential treatments related to the pathogenesis of Fuchs endothelial corneal dystrophy, which may be the focus of future research. CONCLUSIONS: The pathogenesis of Fuchs endothelial corneal dystrophy is very complicated. Currently, corneal transplantation is an important method in the treatment of Fuchs endothelial corneal dystrophy. It is necessary to continuously explore the pathogenesis of Fuchs endothelial corneal dystrophy and establish the scientific foundations for the development of next-generation corneal therapeutics.

Continuous response fluorescence sensor for three small molecules based on nitrogen-doped carbon quantum dots from prunus lannesiana and their logic gate operation.

In this study, an environmentally friendly and water-soluble nitrogen-doped carbon quantum dots (N-CQDs) with quantum yield (QY) of 8.59% were prepared by one-step hydrothermal synthesis without any chemical reagent using the leaves of prunus lannesiana as precursors. The properties and quality of N-CQDs were investigated by Ultraviolet-visible absorption spectroscopy, infrared spectroscopy, X-ray photoelectron spectroscopy, zeta potential, high-resolution transmission electron microscopy and fluorescence spectroscopy. The fluorescence of the prepared N-CQDs can be quenched by Fe3+ through the synergistic effect of the formation of non-fluorescent complex and internal filtration effect (IFE) between Fe3+ and N-CQDs. And the quenched fluorescence can be "turned on" after adding ascorbic acid (AA) because Fe3+ can be released from the surface of N-CQDs through the redox reaction between AA and Fe3+. While the restored fluorescence can be "turned off" again by hydrogen peroxide (H2O2) due to the re-oxidation of Fe2+ to Fe3+. So, the three inputs "logic gate" is achieved and the "on-off-on-off" continuous response fluorescence sensor is formed, which can be applied for the continuous detection of Fe3+, AA and H2O2 with the linear range of 40-260 µM, 10-200 µM and 40-140 µM, respectively. Finally, the sensor was successfully applied to determine Fe3+, AA and H2O2 in real samples with the satisfactory recoveries (95.35%-104.10%) and repeatability (relative standard deviation (RSD) ≤ 1.68%). The continuous response fluorescence sensor prepared by simple green synthesis route has the characteristics of fast response, acceptable sensitivity and good selectivity.

Synthesis of Ag-Ni-Fe-P Multielemental Nanoparticles as Bifunctional Oxygen Reduction/Evolution Reaction Electrocatalysts.

Multielemental nanoparticles (MENPs) provide the possibility to integrate multiple catalytic functions from different elements into one nanoparticle. However, it is difficult to synthesize Ag-based MENPs with transition metals such as Ni and Fe because of the strong phase segregation between Ag and the other metals. Here, we show that nonmetal element P can help the amalgamation of Ag with other metals. Ag-Ni-Fe-P MENPs are successfully synthesized by a solution-phase chemistry, and they demonstrate excellent bifunctional oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) catalytic activities (the potential gap of the potential at 10 mA·cm-2 for OER and half-wave potential for ORR is 630 mV). More important, the synergistic effect from the MENPs endows them with even higher ORR or OER activity than the Ag or NiFeP nanoparticles. A rechargeable Zn-air battery is fabricated by using the Ag-Ni-Fe-P MENPs as the air electrode. The battery has an energy efficiency of ∼60% at 10 mA cm-2. Its performance is almost unchanged during a working period of 250 h, surpassing the Pt/C+IrO2-based battery. These results suggest that the rationally designed MENPs can integrate multiple catalytic functions together and achieve a synergistic effect, which can be used as high-performance multifunctional catalysts.

Rapid microwave-assisted green synthesis of guanine-derived carbon dots for highly selective detection of Ag+ in aqueous solution.

In this work, a simple and green synthetic approach of novel guanine decorated carbon dots (G-CDs) using guanosine 5'-monophosphate and ethylenediamine through a domestic microwave oven was established for the first time. The as-prepared fluorescent G-CDs were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis spectroscopy, and fluorescence spectroscopy. The obtained fluorescent G-CDs with a uniform morphology had desirable functional groups and excellent optical performances. Furthermore, the fluorescence intensity of G-CDs was remarkably quenched by Ag+ than that of other nucleotides-derived CDs. The density functional theory calculations were performed to confirm that the strong interaction of guanine-Ag+ was responsible for the remarkable fluorescence response of G-CDs towards Ag+. In addition, as a label-free fluorescence probe, the G-CDs displayed a good linear detection for highly selective Ag+ sensing over the range of 0-80 µM with the low detection limit of 90 nM. Therefore, the proposed G-CDs had the capacity for Ag+ detection in the real samples.