Evaluation of quality consistency between dispensing granules and traditional decoction of Bombyx batryticatus based on peptidomics and in silico simulations.

The application of traditional Chinese medicine dispensing granules is becoming increasingly prevalent. However, the consistency of dispensing granules with traditional decoction remains controversial. In this study, the consistency of peptide composition and pharmacodynamics between dispensing granules and traditional decoction of Bombyx batryticatus (BB) were assessed. A peptidomics method based on LC-tandem mass spectrometry technology was used to evaluate peptide composition similarity between BB traditional decoction and dispensing granules. The results revealed notable differences in peptide sequences between the two dosage forms, with only 8.55% of peptides shared between them. To evaluate the potential pharmacodynamic effects of the two dosage forms on epilepsy, virtual screening was used to identify potential active peptides, including blood-brain barrier permeability, toxicity prediction, and molecular docking. BB traditional decoction demonstrated a higher number and greater abundance of potential active peptides than BB dispensing granules, suggesting that BB traditional decoction may have a more favorable effect in treating epilepsy compared with BB dispensing granules. Moreover, molecular docking and molecular dynamics simulation studies confirmed the mechanism of action of active peptides to γ-aminobutyric acid transporter 1 (GAT-1). This study provides a scientific basis for the evaluation of quality consistency between BB traditional decoction and dispensing granules.

Correction: A differential-targeting core-shell microneedle patch with coordinated and prolonged release of mangiferin and MSC-derived exosomes for scarless skin regeneration.

Correction for 'A differential-targeting core-shell microneedle patch with coordinated and prolonged release of mangiferin and MSC-derived exosomes for scarless skin regeneration' by Shang Lyu et al., Mater. Horiz., 2024, https://doi.org/10.1039/D3MH01910A.

A differential-targeting core-shell microneedle patch with coordinated and prolonged release of mangiferin and MSC-derived exosomes for scarless skin regeneration.

Microneedles for skin regeneration are conventionally restricted by uncontrollable multi-drug release, limited types of drugs, and poor wound adhesion. Here, a novel core-shell microneedle patch is developed for scarless skin repair, where the shell is composed of hydrophilic gelatin methacryloyl (GelMA) loaded with mangiferin, an anti-inflammatory small molecule, and the core is composed of hydrophobic poly (lactide-co-propylene glycol-co-lactide) dimethacrylates (PGLADMA) loaded with bioactive macromolecule and human mesenchymal stromal cell (hMSC)-derived exosomes. This material choice provides several benefits: the GelMA shell provides a swelling interface for tissue interlocking and rapid release of mangiferin at an early wound healing stage for anti-inflammation, whereas the PGLADMA core offers long-term encapsulation and release of exosomes (30% release in 3 weeks), promoting sustained angiogenesis and anti-inflammation. Our results demonstrate that the core-shell microneedle possesses anti-inflammatory properties and can induce angiogenesis both in vitro in terms of macrophage polarization and tube formation of human umbilical vein endothelial cells (HUVECs), and in vivo in terms of anti-inflammation, re-epithelization, and vessel formation. Importantly, we also observe reduced scar formation in vivo. Altogether, the degradation dynamics of our hydrophilic/hydrophobic materials enable the design of a core-shell microneedle for differential and prolonged release, promoting scarless skin regeneration, with potential for other therapies of long-term exosome release.

Risk stratification of stage II rectal mucinous adenocarcinoma to predict the benefit of adjuvant chemotherapy following neoadjuvant chemoradiation and surgery.

Background: The treatment strategy for stage II rectal mucinous adenocarcinoma (RMA) recommends neoadjuvant chemoradiotherapy (NCR) followed by total mesorectal excision (TME). However, the necessity of adjuvant chemotherapy (AC) remains controversial. Materials and methods: Chi-square test was used to assess the relationship between pathological classification, AC and clinicopathological characteristics. Kaplan-Meier (KM) curves and the log-rank test were utilized to analyze differences in overall survival (OS) and cancer-specific survival (CSS) among different groups. Cox regression identified prognostic factors. Nomogram was established utilizing the independent prognostic factors. X-tile divided patients into three risk subgroups. Results: Compared to RMA, rectal adenocarcinoma (RA) demonstrates longer OS and CSS in all and non-AC stage II patients, with no difference in OS and CSS for AC stage II patients. Propensity score matching analyses yielded similar results. Stratified analysis found that AC both improve OS of RA and RMA patients. Age, gender, pathologic T stage, regional nodes examined, and tumor size were identified as independent prognostic factors for RMA patients without AC. A nomogram was constructed to generate risk scores and categorize RMA patients into three subgroups based on these scores. KM curves revealed AC benefits for moderate and high-risk groups but not for the low-risk group. The external validation cohort yielded similar results. Conclusions: In summary, our study suggests that, compared to stage II RA patients, stage II RMA patients benefit more from AC after NCR. AC is recommended for moderate and high-risk stage II RMA patients after NCR, whereas low-risk patients do not require AC.

Calcium silicate/gelatin composite scaffolds with controllable degradation behavior: Fabrication and evaluation.

Calcium silicate can be used as an excellent material for biodegradable bone scaffolds because it can provide bioactive ions to promote bone regeneration. However, the brittleness and rapid degradation of calcium silicate scaffolds have significantly limited their clinical application. In this work, the calcium silicate scaffolds printed by DLP technology were immersed in a gelatin solution under high vacuum condition to obtain calcium silicate/gelatin composite scaffolds with good mechanical and biological properties. Then, genipin was used as a cross-linker for gelatin to control the degradation properties of the composite scaffolds. The initial compressive strength and toughness of the composite scaffolds were 5.0 times and one order of magnitude higher than those of the pure calcium silicate scaffolds, respectively. The gelatin on the surface of the scaffolds could effectively act as a protective layer to regulate the degradation behaviors of the calcium silicate substrate through controlling the crosslinking degree of the gelatin. After degrading for 14 days, the composite scaffolds at 1.0 % genipin concentration exhibited the highest compressive strength of 8.6 ± 0.8 MPa, much higher than that of the pure ceramic scaffold (1.5 ± 0.3 MPa). It can be found that the toughness of the composite scaffolds were almost over 13.2 times higher than that of the pure ceramic scaffold during degradation, despite the higher toughness loss for the former. Furthermore, the composite scaffolds showed enhanced cell biocompatibility and viability. These results demonstrate that the calcium silicate/gelatin composite scaffolds can be a promising candidate in bone tissue regeneration.

Reproducibility in nontarget screening (NTS) of environmental emerging contaminants: Assessing different HLB SPE cartridges and instruments.

Non-targeted screening (NTS) methods are integral in environmental research for detecting emerging contaminants. However, their efficacy can be influenced by variations in hydrophilic-lipophilic balance (HLB) solid phase extraction (SPE) cartridges and high-resolution mass spectrometry (HRMS) instruments across different laboratories. In this study, we scrutinized the influence of five HLB SPE cartridges (Nano, Weiqi, CNW, Waters, and J&K) and four LC-HRMS platforms (Agilent, Waters, Thermo, and AB SCIEX) on the identification of emerging environmental contaminants. Our results demonstrate that 87.6 % of the target compounds and over 59.6 % of the non-target features were consistently detected across all tested HLB cartridges, with an overall 71.2 % universally identified across the four LC-HRMS systems. Discrepancies in detection rates were primarily attributable to variations in retention time stability, mass stability of precursors and fragments, system cleanliness affecting fold change and p-values, and fragment response. These findings confirm the necessity of refining parameter criteria for NTS. Moreover, our study confirms the efficacy of the PyHRMS tool in analyzing and processing data from multiple instrumental platforms, reinforcing its utility for multi-platform NTS. Overall, our findings underscore the reliability and robustness of NTS methods in identifying potential water contaminants, while also highlighting factors that may influence these outcomes.

ECA-TFUnet: A U-shaped CNN-Transformer network with efficient channel attention for organ segmentation in anatomical sectional images of canines.

Automated organ segmentation in anatomical sectional images of canines is crucial for clinical applications and the study of sectional anatomy. The manual delineation of organ boundaries by experts is a time-consuming and laborious task. However, semi-automatic segmentation methods have shown low segmentation accuracy. Deep learning-based CNN models lack the ability to establish long-range dependencies, leading to limited segmentation performance. Although Transformer-based models excel at establishing long-range dependencies, they face a limitation in capturing local detail information. To address these challenges, we propose a novel ECA-TFUnet model for organ segmentation in anatomical sectional images of canines. ECA-TFUnet model is a U-shaped CNN-Transformer network with Efficient Channel Attention, which fully combines the strengths of the Unet network and Transformer block. Specifically, The U-Net network is excellent at capturing detailed local information. The Transformer block is equipped in the first skip connection layer of the Unet network to effectively learn the global dependencies of different regions, which improves the representation ability of the model. Additionally, the Efficient Channel Attention Block is introduced to the Unet network to focus on more important channel information, further improving the robustness of the model. Furthermore, the mixed loss strategy is incorporated to alleviate the problem of class imbalance. Experimental results showed that the ECA-TFUnet model yielded 92.63% IoU, outperforming 11 state-of-the-art methods. To comprehensively evaluate the model performance, we also conducted experiments on a public dataset, which achieved 87.93% IoU, still superior to 11 state-of-the-art methods. Finally, we explored the use of a transfer learning strategy to provide good initialization parameters for the ECA-TFUnet model. We demonstrated that the ECA-TFUnet model exhibits superior segmentation performance on anatomical sectional images of canines, which has the potential for application in medical clinical diagnosis.

Safety and feasibility of robotic surgery for colon cancer patients with previous abdominal surgery: a propensity score-matching analysis.

Robotic surgery is widely used in gastrointestinal surgery. While the application of robotic surgery for colon cancer patients with previous abdominal surgery (PAS) remains controversial for the fear of intra-abdominal adhesions. This study was aimed to evaluate the safety and feasibility of robotic colectomy for patients with PAS. The medical records of colon cancer patients who underwent robotic surgery at our hospital from June 2015 to August 2020 were extracted and analyzed. Propensity score-matching (PSM) analysis was implemented to minimize selection bias. We compared perioperative outcomes and postoperative complications between the patients with PAS or with no PAS (NPAS). A total of 79 patients (PAS group) and 348 patients (NPAS group) were included in our study. After PSM, 79 patients of PAS group and 79 patients of NPAS group were selected for further analysis. We did not find statistical difference in operative time, estimated blood loss, lymph nodes retrieved, length of hospital stay and hospital costs between the two groups. No difference was noted in the incidence of postoperative complications, conversion to open surgery and mortality between the two groups. According to the results of multivariate analysis, PAS was not identified as risk factor for postoperative complications. Left hemicolectomy and perioperative transfusion were associated with postoperative complications. PAS did not negatively affect the outcomes of robotic colectomy. After individually preoperative assessment, robotic surgery could be performed feasibly and safely for colon cancer patients with PAS.

The benefits of adjuvant chemotherapy are associated with the kind of neoadjuvant therapy in stage ypI rectal cancer: evidence based on population analysis.

PURPOSE: The oncological role of adjuvant chemotherapy (ACT) remains debated in locally advanced rectal cancer (RC) after neoadjuvant therapy (NAT), especially ypI RC. In this study, we used population-based data to evaluate the benefits of ACT in stage ypI RC after NAT and surgery. Moreover, we tried to differentiate what kind of NAT (radiotherapy alone or chemoradiotherapy) was administered because this may affect the further efficacy of ACT. METHODS: All patients with stage ypI primary rectal malignancy were diagnosed in the SEER database between 2004 and 2017. The Kaplan-Meier method was applied to estimate the effects of ACT in survival analysis. Cox regression was performed to calculate the hazard ratio (HR) and the prognosis factors of survival. Propensity score matching (PSM) was used to balance the parameters between therapy groups. RESULTS: The overall cohort's median follow-up time was 105 months. For 5-year OS and CSS, there were no significant differences between the ACT ( +) and ACT (-) groups (p = 0.105; p = 0.788). However, subgroup analyses according to the kind of NAT found that ACT improved overall survival (OS) and cancer-specific survival (CSS) in patients who received neoadjuvant radiotherapy (nRT) (p < 0.001, p = 0.015). Among patients who received neoadjuvant chemoradiotherapy (nCRT), no significant survival benefits were found between the ACT ( +) and ACT (-) groups (p = 0.526, p = 0.288). CONCLUSION: Our population-based cohort study suggested that the efficacy of ACT was associated with the kind of NAT. The ACT provides survival benefits in stage ypI RC for patients who received nRT. However, among patients who received nCRT, ACT did not improve long-term survival.

Adjuvant chemotherapy improves long-term survival in pathologic stage III rectal mucinous adenocarcinoma after pre-operative chemoradiotherapy.

PURPOSE: The benefits of adjuvant chemotherapy remain debated rectal mucinous adenocarcinoma (MC). Our study aims to delve into the efficacy of adjuvant chemotherapy in pathologic stage III rectal MC by a large population-based database. METHODS: The Chi-square test was performed to examine the parameters between treatment groups. The overall survival (OS) and cancer-specific survival (CSS) of treatment groups were conducted by using the Kaplan-Meier method. The impact of factors on survival was assessed using Cox regression analyses. To balance the covariates and reduce the selection bias, we employed propensity score matching (PSM) to narrow the differences between treatment groups. RESULTS: The median follow-up time for overall patients was 80 months. In the pre-operative chemoradiotherapy (pre-CRT) group, patients who received adjuvant chemotherapy had significantly better 5-year OS and CSS. Multivariate analyses found that adjuvant chemotherapy was associated with better OS (p < 0.001, HR (95% CI): 0.66 (0.51-0.86)) and CSS (p = 0.012, HR (95% CI): 0.71 (0.54-0.93)). However, adjuvant chemotherapy was not an independent prognosis factor in both OS (p = 0.149, HR (95% CI): 0.76 (0.53-1.1); Supplement Table 1) and CSS (p = 0.183, HR (95% CI): 0.74 (0.48-1.15)) in patients who did not receive pre-CRT. After PSM, similar results were found in the pre-CRT and the no pre-CRT groups. CONCLUSION: In conclusion, our population-based retrospective cohort study indicates that the effects of adjuvant chemotherapy were associated with the pre-CRT status in patients with stage III rectal MC. In patients who underwent pre-CRT, the receipt of adjuvant chemotherapy was associated with better survival outcomes. Conversely, adjuvant chemotherapy does not seem to confer significant survival benefits to patients without pre-CRT.

Safety and feasibility of robotic surgery for old rectal cancer patients.

Robotic surgery is widely utilized for rectal cancer. Older patients are associated with comorbidity and diminished cardiopulmonary reserve, resulting in uncertainty and reluctance to perform robotic surgery in older patients. The aim of the study was to assess the safety and feasibility of robotic surgery in older rectal cancer patients. We collected the data of patients diagnosed with rectal cancer and operated at our hospital from May 2015 to January 2021. All patients undergoing robotic surgery were classified into two groups: the old group (≥ 70 years) and young group (< 70 years). Perioperative outcomes were analyzed and compared between the two groups. Risk factors related to postoperative complications were also explored. A total of old N = 114 and young N = 324 rectal patients were enrolled in our study. Older patients were prone to exhibit comorbidity than the young and had lower body mass index and higher scores of American Society of Anesthesiologists than the young. No statistical difference was found in operative time, estimated blood loss, lymph nodes retrieved, tumor size, pathological TNM stage, hospital stay after surgery and total hospital cost between the two groups. The incidence of postoperative complications did not show difference between the two groups. On multivariate analyses, male sex and longer operative time could predict postoperative complications, whereas old age was not an independent factor for postoperative complications. After careful preoperative evaluation, robotic surgery is a technically feasible and safe procedure for older rectal cancer patients.

Development of Strong and Tough ß-TCP/PCL Composite Scaffolds with Interconnected Porosity by Digital Light Processing and Partial Infiltration.

Strong and tough ß-TCP/PCL composite scaffolds with interconnected porosity were developed by combining digital light processing and vacuum infiltration. The composite scaffolds were comprised of pure ß-TCP, ß-TCP matrix composite and PCL matrix composite. The porous ß-TCP/PCL composite scaffolds showed remarkable mechanical advantages compared with ceramic scaffolds with the same macroscopic pore structure (dense scaffolds). The composite scaffolds exhibited a significant increase in strain energy density and fracture energy density, though with similar compressive and flexural strengths. Moreover, the composite scaffolds had a much higher Weibull modulus and longer fatigue life than the dense scaffolds. It was revealed that the composite scaffolds with interconnected porosity possess comprehensive mechanical properties (high strength, excellent toughness, significant reliability and fatigue resistance), which suggests that they could replace the pure ceramic scaffolds for degradable bone substitutes, especially in complex stress environments.

In situ Ti assisted graphitization approach for the preparation of graphite foam with light weight and high thermal conductivity.

The state-of-the-art graphite foams (GFs) are afflicted by large bulk density and low thermal conductivity, restricting their practical application. To alleviate the above problem, herein, an issue-oriented scheme, i.e., an in situ titanium (Ti) assisted catalytic graphitization strategy was proposed by using AR mesophase pitch (ARMP) as a precursor. In a typical preparation process, the mixture of Ti and ARMP underwent a pressurized foam, carbonization, and graphitization procedure successively to obtain GFs. The results showed that the Ti content played an important role in the development of the graphitic microcrystal structure due to the catalytic graphitization of Ti. According to the XRD analysis and molecular dynamics (MD) simulation, we confirmed that Ti promoted graphitization mainly by the generation of TiC during the high-temperature graphitization. The GFs obtained with 11 wt% Ti exhibited the most perfect graphitic crystal structure, with the highest graphitization degree. Thanks to the improved graphitization degree, the thermal conductivity of GFs increased with the added amount of Ti increasing from 0 to 11 wt%. The highest thermal conductivity of 60.8 W m-1 K-1 and the low bulk density of 0.36 g cm-3 could be achieved when the addition amount of Ti was 11 wt%. Meanwhile, apart from the optimization of thermal conductivity and bulk density, the compressive strength was also enhanced as the amount of Ti increased from 0 to 15 wt%. Our work provided a facile and scalable approach to preparing GFs with low density and high thermal conductivity.

Coal-Based Semicoke-Derived Carbon Anode Materials with Tunable Microcrystalline Structure for Fast Lithium-Ion Storage.

Fast charging capability is highly desired for new generation lithium-ion batteries used in consumer-grade electronic devices and electric vehicles. However, currently used anodes suffer from sluggish ion kinetics due to limited interlayer distance. Herein, the coal-based semicoke was chosen as precursor to prepare cost-effective carbon anodes with high-rate performance through a facile pyrolytic strategy. The evolution of microstructure and its effect on electrochemical performance are entirely studied. The results show that large number of short-ordered defective structures are generated due to the occurrence of turbostatic-like structures when pyrolyzed at 900 °C, which are propitious to large interlayer distance and developed porous structure. High accessible surface area and large interlayer spacing with short-ordered defective domains endow the sample treated at 900 °C under argon (A900) with accelerated ion dynamics and enhanced ion adsorption dominated surface-induced capacitive processes. As a result, A900 delivers high capacity (331.1 mAh g-1 at 0.1 A g-1) and long life expectancy (94.8% after 1000 cycles at 1 A g-1) as well as good rate capability (153.2 mAh g-1 at 5 A g-1). This work opens a scalable avenue to fabricating cost-effective, high-rate, and long cycling life carbon anodes.

[Rapid screening and identification of 167 illegally added medicines in herbal tea by ultra high performance liquid chromatography-electrostatic field orbitrap high resolution mass spectrometry].

An accurate mass database and a method based on ultra high performance liquid chromatography-electrostatic field orbitrap high resolution mass spectrometry (UHPLC-Orbitrap HRMS) were developed. These were applied in the screening and identification of illegally added medicines in herbal tea. Based on investigations, 167 medicines were selected to build an accurate MS database; these medicines included antipyretic analgesics, glucocorticoids, antibiotics, and antihistamines, among other categories. The database was established using Orbitrap HRMS and TraceFinder software. The database carried information on all selected compounds, including the molecular formula, accurate mass of precursor ions and fragment ions, retention time, and mass spectra. The samples were ultrasonically extracted with a 50% (v/v) methanol aqueous solution. The extracted solutions were separated using a Waters XBrigde BEH C18 column (100 mm×2.1 mm, 2.5 µm). As the mobile phases, 0.1% (v/v) formic acid aqueous solution and acetonitrile containing 0.1% (v/v) formic acid were used, with gradient elution. The sample solutions were analyzed by Orbitrap HRMS in the full-scan MS and data-dependent MS/MS acquisition modes (Full MS/dd-MS2). Positive and negative polarity data were simultaneously acquired. Some parameters were optimized to increase the peak intensity and sensitivity of all compounds. The resolutions in the full-MS scan and dd-MS2 scan were set to 70000 and 17500, respectively. In the full-MS mode, scanning was performed in the range of m/z 100 to 1000. In the MS/MS mode, the normalized collision energy (NEC) was set to 20%, 40%, and 60% for each compound. The inclusion list was not used during the measurement, and the dynamic exclusion time was set to 10.0 s. The loop count was set to 5. After acquiring the sample data with these conditions using Orbitrap MS, they were imported into TraceFinder software, through which the sample information was extracted and automatically matched with the information on compounds in the MS database. Screening and identification were conducted by comparing the retention times as well as the exact masses of precursor ions and fragment ions that were experimentally measured. If the errors between the experimentally and theoretically obtained masses of the precursor ions were below 5×10-6 and the deviations in retention times were less than 20 s, then suspicious positive compounds might be identified. Furthermore, if such compounds possess more than one similar fragment ion with a mass tolerance below 5×10-6, and exhibit similar ion distributions in the MS/MS profiles (compared to those in the database), they could be confirmed to be the same. The validation result showed that all compounds had good linear relationships, with correlation coefficients (r) greater than 0.99. Because pefloxacin, norfloxacin, desloratadine, astemizole and clindamycin had background interference, the method was not suitable for their quantification. Following experiments using three spiked concentrations, the recoveries of the rest 162 compounds were found to be in the range of 66.4%-118.1%, and the relative standard deviations (RSDs, n=6), in the range of 0.1%-16.1%. When the limit of detection (LOD) was 0.2 mg/kg, 83 compounds were detected, while when the LOD was 1.0 mg/kg, 167 compounds were detected. All compounds were matched successfully to the standard added sample with the MS database in TraceFinder software. To lower the likelihood of false positive and false negative results, a quality control method was recommended. The method was applied to analyze 245 herbal tea samples, among which 12 positive samples were detected. Thirteen positive compounds were found, including acetaminophen, diclofenac sodium, chlorpheniramine, brompheniramine, dexamethasone, dexamethasone 21-acetate, prednisone, prednisone 21-acetate, metronidazole, erythromycin, ciprofloxacin, amantadine, and dextromethorphan. In particular, amantadine, dextromethorphan, brompheniramine, and ciprofloxacin were newly detected, compared to standard methods. The developed method is rapid and accurate, and will be useful in the high-throughput screening of illegally added medicines in herbal tea.

3D Bioprinting Photo-Crosslinkable Hydrogels for Bone and Cartilage Repair.

Three-dimensional (3D) bioprinting has become a promising strategy for bone manufacturing, with excellent control over geometry and microarchitectures of the scaffolds. The bioprinting ink for bone and cartilage engineering has thus become the key to developing 3D constructs for bone and cartilage defect repair. Maintaining the balance of cellular viability, drugs or cytokines' function, and mechanical integrity is critical for constructing 3D bone and/or cartilage scaffolds. Photo-crosslinkable hydrogel is one of the most promising materials in tissue engineering; it can respond to light and induce structural or morphological transition. The biocompatibility, easy fabrication, as well as controllable mechanical and degradation properties of photo-crosslinkable hydrogel can meet various requirements of the bone and cartilage scaffolds, which enable it to serve as an effective bio-ink for 3D bioprinting. Here, in this review, we first introduce commonly used photo-crosslinkable hydrogel materials and additives (such as nanomaterials, functional cells, and drugs/cytokine), and then discuss the applications of the 3D bioprinted photo-crosslinkable hydrogel scaffolds for bone and cartilage engineering. Finally, we conclude the review with future perspectives about the development of 3D bioprinting photo-crosslinkable hydrogels in bone and cartilage engineering.

Screening Aptamers that Are Specific for Beclomethasone and the Development of Quantum Dot-Based Assay.

We developed an aptamer that was specific for beclomethasone (BEC) via systematic evolution of ligands by exponential enrichment (SELEX). Development was monitored by real-time quantitative PCR (Q-PCR) and the enriched library was sequenced by high-throughput sequencing. Forty-seven aptamer candidates were obtained; of these, BEC-6 showed the highest affinity (Kd = 0.15 ± 0.02 µM) and did not cross-react with other BEC analogs. We also developed a quantum dot-based assay (QDA) for the detection of BEC that was based upon a quantum dot (QD) composite probe. Under optimized reaction conditions, the linear range of this method for BEC was 0.1 to 10 µM with a low detection limit (LOD) of 0.1 µM. Subsequently, the method was used to detect BEC in Traditional Chinese Medicine (TCM) with a mean recovery of 81.72-91.84%. This is the first report to describe the development of an aptamer against BEC; BEC-6 can also be engineered into QDA for the detection of BEC.

ZrB2-Based "Brick-and-Mortar" Composites Achieving the Synergy of Superior Damage Tolerance and Ablation Resistance.

The intrinsic brittleness and poor damage tolerance of ultrahigh-temperature ceramics are the key obstacles to their engineering applications as nonablative thermal protection materials. Biomimetic layered or "brick-and-mortar" hybrid composites composed of alternative strong/weak interfaces exhibit excellent strength and high toughness; however, the commonly used interfacial materials are weak and have poor thermal stability and ablation resistance, which strictly limit their use in high-temperature and oxidative environments. In this work, ZrB2-based "brick-and-mortar" hybrid ceramics were constructed with a hierarchical biomimetic design to improve the fracture resistance and damage tolerance. ZrB2-20vol %SiC ceramics containing 30 vol % reduced graphene oxide nanosheets were used as the weak interface to increase crack growth resistance without destroying the excellent ablation resistance. Finally, the ZrB2-based "brick-and-mortar" composites achieve the synergy of superior damage tolerance and ablation resistance.

A comparative study unraveling the effects of TNF-α stimulation on endothelial cells between 2D and 3D culture.

Endothelial cell (EC) dysfunction is an important predictor of and contributor to the pathobiology of cardiovascular diseases. However, most in vitro studies are performed using monolayer cultures of ECs on 2D tissue polystyrene plates (TCPs), which cannot reflect the physiological characteristics of cells in vivo. Here, we used 2D TCPs and a 3D culture model to investigate the effects of dimensionality and cardiovascular risk factors in regulating endothelial dysfunction. Cell morphology, oxidative stress, inflammatory cytokines and endothelial function were investigated in human umbilical vein endothelial cells (HUVECs) cultured in 2D/3D. The differentially expressed genes in 2D/3D-cultured HUVECs were analysed using Enrichr, Cytoscape and STRING services. Finally, we validated the proteins of interest and confirmed their relevance to TNF-α and the culture microenvironment. Compared with 2D TCPs, 3D culture increased TNF-α-stimulated oxidative stress and the inflammatory response and changed the mediators secreted by ECs. In addition, the functional characteristics, important pathways and key proteins were determined by bioinformatics analysis. Furthermore, we found that some key proteins, notably ACE, CD40, Sirt1 and Sirt6, represent a critical link between endothelial dysfunction and dimensionality, and these proteins were screened by bioinformatics analysis and verified by western blotting. Our observations provide insight into the interdependence between endothelial dysfunction and the complex microenvironment, which enhances our understanding of endothelial biology or provides a therapeutic strategy for cardiovascular-related diseases.

Development of biodegradable bioactive glass ceramics by DLP printed containing EPCs/BMSCs for bone tissue engineering of rabbit mandible defects.

Bioactive glass ceramics have excellent biocompatibility and osteoconductivity; and can form direct chemical bonds with human bones; thus, these ceramic are considered as "Smart" materials. In this study, we develop a new type of bioactive glass ceramic (AP40mod) as a scaffold containing Endothelial progenitor cells (EPCs) and Mesenchymal stem cells (BMSCs) to repair critical-sized bone defects in rabbit mandibles. For in vitro experiments: AP40mod was prepared by Dgital light processing (DLP) system and the optimal ratio of EPCs/BMSCs was screened by analyzing cell proliferation and ALP activity, as well as the influence of genes related to osteogenesis and angiogenesis by direct inoculation into scaffolds. The scaffold showed suitable mechanical properties, with a Bending strength 52.7 MPa and a good biological activity. Additionally, when EPCs/BMSCs ratio were combined at a ratio of 2:1 with AP40mod, the ALP activity, osteogenesis and angiogenesis were significantly increased. For in vivo experiments: application of AP40mod/EPCs/BMSCs (after 7 days of in vitro spin culture) to repair and reconstruct critical-sized mandible defect in rabbit showed that all scaffolds were successfully accurately implanted into the defect area. As revealed by macroscopically and CT at the end of 9 months, defects in the AP40mod/EPCs/BMSCs group were nearly completely covered by normal bone and the degradation rate was 29.9% compared to 20.1% in the AP40mod group by the 3D reconstruction. As revealed by HE and Masson staining analyses, newly formed blood vessels, bone marrow and collagen maturity were significantly increased in the AP40mod/EPCs/BMSCs group compared to those in the AP40mod group. We directly inoculated cells on the novel material to screen for the best inoculation ratio. It is concluded that the AP40mod combination of EPCs/BMSCs is a promising approach for repairing and reconstructing large load bearing bone defect.