Improved Rigidin-Inspired Antiproliferative Agents with Modifications on the 7-Deazahypoxanthine C7/C8 Ring Systems.

To improve their aqueous solubility characteristics, water-solubilizing groups were added to some antiproliferative, rigidin-inspired 7-deazahypoxanthine frameworks after molecular modeling seemed to indicate that structural modifications on the C7 and/or C8 phenyl groups would be beneficial. To this end, two sets of 7-deazahypoxanthines were synthesized by way of a multicomponent reaction approach. It was subsequently determined that their antiproliferative activity against HeLa cells was retained for those derivatives with a glycol ether at the 4'-position of the C8 aryl ring system, while also significantly improving their solubility behavior. The best of these compounds were the equipotent 6-[4-(2-ethoxyethoxy)benzoyl]-2-(pent-4-yn-1-yl)-5-phenyl-1,7-dihydro-4H-pyrrolo[2,3-d]pyrimidin-4-one 33 and 6-[4-(2-ethoxyethoxy)benzoyl]-5-(3-fluorophenyl)-2-(pent-4-yn-1-yl)-1,7-dihydro-4H-pyrrolo[2,3-d]pyrimidin-4-one 59. Similarly to the parent 1, the new derivatives were also potent inhibitors of tubulin assembly. In treated HeLa cells, live cell confocal microscopy demonstrated their impact on microtubulin dynamics and spindle morphology, which is the upstream trigger of mitotic delay and cell death.

Reversible Phase Transformations in a Double-Walled Diamondoid Coordination Network with a Stepped Isotherm for Methane.

Flexible metal-organic materials (FMOMs) with stepped isotherms can offer enhanced working capacity in storage applications such as adsorbed natural gas (ANG) storage. Unfortunately, whereas >1000 FMOMs are known, only a handful exhibit methane uptake of >150 cm3/cm3 at 65 atm and 298 K, conditions relevant to ANG. Here, we report a double-walled 2-fold interpenetrated diamondoid (dia) network, X-dia-6-Ni, [Ni2L4(µ-H2O)]n, comprising a new azo linker ligand, L- (L- = (E)-3-(pyridin-4-yldiazenyl)benzoate) and 8-connected dinuclear molecular building blocks. X-dia-6-Ni exhibited gas (CO2, N2, CH4) and liquid (C8 hydrocarbons)-induced reversible transformations between its activated narrow-pore ß phase and γ, a large-pore phase with ca. 33% increase in unit cell volume. Single-crystal X-ray diffraction (SCXRD) studies of the as-synthesized phase α, ß, and γ revealed that structural transformations were enabled by twisting of the azo moiety and/or deformation of the MBB. Further insight into these transformations was gained from variable temperature powder XRD and in situ variable pressure powder XRD. Low-temperature N2 and CO2 sorption revealed stepped Type F-II isotherms with saturation uptakes of 422 and 401 cm3/g, respectively. X-dia-6-Ni exhibited uptake of 200 cm3/cm3 (65 atm, 298 K) and a high CH4 working capacity of 166 cm3/cm3 (5-65 bar, 298 K, 33 cycles), the third highest value yet reported for an FMOM and the highest value for an FMOM with a Type F-II isotherm.

Metal cation substitution can tune CO2, H2O and CH4 switching pressure in transiently porous coordination networks.

Compared to rigid physisorbents, switching coordination networks that reversibly transform between closed (non-porous) and open (porous) phases offer promise for gas/vapour storage and separation owing to their improved working capacity and desirable thermal management properties. We recently introduced a coordination network, X-dmp-1-Co, which exhibits switching enabled by transient porosity. The resulting "open" phases are generated at threshold pressures even though they are conventionally non-porous. Herein, we report that X-dmp-1-Co is the parent member of a family of transiently porous coordination networks [X-dmp-1-M] (M = Co, Zn and Cd) and that each exhibits transient porosity but switching events occur at different threshold pressures for CO2 (0.8, 2.1 and 15 mbar, for Co, Zn and Cd, respectively, at 195 K), H2O (10, 70 and 75% RH, for Co, Zn and Cd, respectively, at 300 K) and CH4 (<2, 10 and 25 bar, for Co, Zn and Cd, respectively, at 298 K). Insight into the phase changes is provided through in situ SCXRD and in situ PXRD. We attribute the tuning of gate-opening pressure to differences and changes in the metal coordination spheres and how they impact dpt ligand rotation. X-dmp-1-Zn and X-dmp-1-Cd join a small number of coordination networks (<10) that exhibit reversible switching for CH4 between 5 and 35 bar, a key requirement for adsorbed natural gas storage.

Visible-Light-Triggered Photoswitching of Diphosphene Complexes.

Although diphosphene transition metal complexes are known to undergo E to Z isomerization upon irradiation with UV light, their potential for photoswitching has remained poorly explored. In this study, we present diphosphene complexes capable of reversible photoisomerizations through haptotropic rearrangements. The compounds [(2-κ2 P,κ6 C)Mo(CO)2 ][OTf] (3 a[OTf]), [(2-κ2 P,κ6 C)Fe(CO)][OTf] (3 b[OTf]), and [(2-κ2 P)Fe(CO)4 ][OTf] (4[OTf]) were prepared using the triflate salt [(LC )P=P(Dipp)][OTf] (2[OTf) as a precursor (LC =4,5-dichloro-1,3-bis(2,6-diisiopropylphenyl)-imidazolin-2-yl; Dipp=2,6-diisiopropylphenyl, OTf=triflate). Upon exposure to blue or UV light (λ=400 nm, 470 nm), the initially red-colored η2 -diphosphene complexes 3 a,b[OTf] readily undergo isomerization to form blue-colored η1 -complexes [(2-κ1 P,κ6 C)M(CO)n ][OTf] (5 a,b[OTf]; a: M=Mo, n=2; b: M=Fe, n=1). This haptotropic rearrangement is reversible, and the (κ2 P,κ6 C)-coordination mode gradually reverts back upon dissolution in coordinating solvents or more rapidly upon exposure to yellow or red irradiation (λ=590 nm, 630 nm). The electronic reasons for the reversible visible-light-induced photoswitching observed for 3 a,b[OTf] are elucidated by DFT calculations. These calculations indicate that the photochromic isomerization originates from the S1 excited state and proceeds through a conical intersection.

Programmed Pore-Shape Fixing in a Soft Porous Molecular Crystal-Navigating the Phase Interconversion Landscape.

Pore-shape fixing effects (PSFEs) in soft porous crystals are a relatively unexplored area of materials chemistry. We report the PSFE in the prototypical dynamic van der Waals solid p-tert-butylcalix[4]arene (TBC4). Starting with the high-density guest-free phase, two porous shape-fixed phases were programmed using the stimuli of CO2 pressure and temperature. A suite of complementary in situ techniques, including variable-pressure (VP) single-crystal X-ray diffraction, VP powder X-ray diffraction, VP differential scanning calorimetry, volumetric sorption analysis, and attenuated total reflectance Fourier-transform infrared spectroscopy was used to track dynamic guest-induced transformations, providing molecular-level insight into the PSFE. The interconversion between the two metastable phases is particle size dependent, making this the second example of the PSFE by crystal downsizing, and the first example involving a porous molecular crystal: larger particles undergo reversible transitions while smaller particles remain fixed in the metastable phase. A complete phase interconversion scheme was constructed for the material, thus allowing navigation of the phase interconversion landscape of TBC4 using the easily applied stimuli of CO2 pressure and thermal treatment.

Reversible transformations between the non-porous phases of a flexible coordination network enabled by transient porosity.

Flexible metal-organic materials that exhibit stimulus-responsive switching between closed (non-porous) and open (porous) structures induced by gas molecules are of potential utility in gas storage and separation. Such behaviour is currently limited to a few dozen physisorbents that typically switch through a breathing mechanism requiring structural contortions. Here we show a clathrate (non-porous) coordination network that undergoes gas-induced switching between multiple non-porous phases through transient porosity, which involves the diffusion of guests between discrete voids through intra-network distortions. This material is synthesized as a clathrate phase with solvent-filled cavities; evacuation affords a single-crystal to single-crystal transformation to a phase with smaller cavities. At 298 K, carbon dioxide, acetylene, ethylene and ethane induce reversible switching between guest-free and gas-loaded clathrate phases. For carbon dioxide and acetylene at cryogenic temperatures, phases showing progressively higher loadings were observed and characterized using in situ X-ray diffraction, and the mechanism of diffusion was computationally elucidated.

Adsorption to the Surface of Hemozoin Crystals: Structure-Based Design and Synthesis of Amino-Phenoxazine ß-Hematin Inhibitors.

In silico adsorption of eight antimalarials that inhibit ß-hematin (synthetic hemozoin) formation identified a primary binding site on the (001) face, which accommodates inhibitors via formation of predominantly π-π interactions. A good correlation (r2 =0.64, P=0.017) between adsorption energies and the logarithm of ß-hematin inhibitory activity was found for this face. Of 53 monocyclic, bicyclic and tricyclic scaffolds, the latter yielded the most favorable adsorption energies. Five new amino-phenoxazine compounds were pursued as ß-hematin inhibitors based on adsorption behaviour. The 2-substituted phenoxazines show good to moderate ß-hematin inhibitory activity (<100 µM) and Plasmodium falciparum blood stage activity against the 3D7 strain. N1 ,N1 -diethyl-N4 -(10H-phenoxazin-2-yl)pentane-1,4-diamine (P2a) is the most promising hit with IC50 values of 4.7±0.6 and 0.64±0.05 µM, respectively. Adsorption energies are predictive of ß-hematin inhibitory activity, and thus the in silico approach is a beneficial tool for structure-based development of new non-quinoline inhibitors.

Facile synthesis of a C4-symmetrical inherently chiral calix[4]arene.

Inherently chiral calix[4]arenes with C4-symmetry are extremely rare and difficult to synthesise, severely hampering any effort to expand on their potential as chiral supramolecular catalysts and building blocks. Herein we report a reaction of a tetracarbamate calix[4]arene with NBS which results in a high yield of an inherently chiral calix[4]arenes with C4-symmetry. Furthermore, employing a chiral N-Boc proline moiety allows for separation of the diastereomers formed, thus obtaining the pure enantiomers after hydrolysis. The enantiomers could be assigned based on the CD spectra and DFT calculated values.

Tuning extreme anisotropic thermal expansion in 1D coordination polymers through metal selection and solid solutions.

The thermal expansion behaviour of a series of 1D coordination polymers has been investigated. Variation of the metal centre allows tuning of the thermal expansion behaviour from colossal positive volumetric to extreme anomalous thermal expansion. Preparation of solid solutions increased the magnitude of the anomalous thermal expansion further, producing two species displaying supercolossal anisotropic thermal expansion (ZnCoCPHTαY2 = -712 MK-1, αY3 = 1632 MK-1 and ZnCdCPHTαY2 = -711 MK-1, αY3 = 1216 MK-1).

Solvent-Free Enzyme Activity: Quick, High-Yielding Mechanoenzymatic Hydrolysis of Cellulose into Glucose.

Mechanochemistry enables enzymatic cleavage of cellulose into glucose without bulk solvents, acids, other aggressive reagents, or substrate pre-treatment. This clean mechanoenzymatic process (coined RAging) is also directly applicable to biomass, avoids many limitations associated with the use of cellulases, and produces glucose concentrations greater than three times that obtained by conventional methods.

Towards medicinal mechanochemistry: evolution of milling from pharmaceutical solid form screening to the synthesis of active pharmaceutical ingredients (APIs).

This overview highlights the emergent area of mechanochemical reactions for making active pharmaceutical ingredients (APIs), and covers the latest advances in the recently established area of mechanochemical screening and synthesis of pharmaceutical solid forms, specifically polymorphs, cocrystals, salts and salt cocrystals. We also provide an overview of the most recent developments in pharmaceutical uses of mechanochemistry, including real-time reaction monitoring, techniques for polymorph control and approaches for continuous manufacture using twin screw extrusion, and more. Most importantly, we show how the overlap of previously unrelated areas of mechanochemical screening for API solid forms, organic synthesis by milling, and mechanochemical screening for molecular recognition, enables the emergence of a new research discipline in which different aspects of pharmaceutical and medicinal chemistry are addressed through mechanochemistry rather than through conventional solution-based routes. The emergence of such medicinal mechanochemistry is likely to have a strong impact on future pharmaceutical and medicinal chemistry, as it offers not only access to materials and reactivity that are sometimes difficult or even impossible to access from solution, but can also provide a general answer to the demands of the pharmaceutical industry for cleaner, safer and efficient synthetic solutions.

An infinite catenane self-assembled by π···π interactions.

Phenanthrenyl-based metallocycles are mechanically interlinked to form an infinite catenated chain. The formation of the catenane is governed by an infinite π···π stack involving the phenanthrenyl moieties.

Interconversion between different stoichiometric forms of a three-component crystal via liquid-assisted grinding.

A second polymorphic form of a 1 : 2 : 3 pamoate : DABCO : water salt has been obtained by liquid-assisted grinding, and it is shown that interconversion between this salt and a salt with 1 : 1 : 2 stoichiometry is facile via liquid-assisted grinding with additional amounts of pamoic acid (to generate the 1 : 1 : 2 salt) or DABCO (to generate the 1 : 2 : 3 salt).

Dibenzyl penta-thio-dicarbonate.

In the title compound, C(16)H(14)S(5), the non-bonded intra-molecular distances between the non-terminal S atoms are 2.808 (16) and 2.784 (16) Å, shorter than the typical distance of 2.9 Å. One phenyl ring participates in an offset π-π inter-action with another phenyl ring related by a centre of inversion; the inter-planar distance is 3.41 (2) Å. The crystal structure also exhibits edge-to-face C-H⋯π stacking of the phenyl rings, thus forming a herring-bone packing motif.