RESUMEN
The development of a microneedle-based biosensor array for multiplexed in situ detection of exercise-induced metabolic acidosis, tumor microenvironment, and other variations in tissue chemistry is described. Simultaneous and selective amperometric detection of pH, glucose, and lactate over a range of physiologically relevant concentrations in complex media is demonstrated. Furthermore, materials modified with a cell-resistant (Lipidure(®)) coating were shown to inhibit macrophage adhesion; no signs of coating delamination were noted over a 48-h period.
Asunto(s)
Acidosis/metabolismo , Técnicas Biosensibles/métodos , Glucosa/metabolismo , Ácido Láctico/análisis , Acidosis/diagnóstico , Técnicas Biosensibles/instrumentación , Carbono , Adhesión Celular , Materiales Biocompatibles Revestidos , Técnicas Electroquímicas , Ejercicio Físico , Glucosa Oxidasa/metabolismo , Humanos , Concentración de Iones de Hidrógeno , Ácido Láctico/biosíntesis , Macrófagos/fisiología , Microelectrodos , AgujasRESUMEN
In this study, carbon fiber electrodes were incorporated within a hollow microneedle array, which was fabricated using a digital micromirror device-based stereolithography instrument. Cell proliferation on the acrylate-based polymer used in microneedle fabrication was examined with human dermal fibroblasts and neonatal human epidermal keratinocytes. Studies involving full-thickness cadaveric porcine skin and trypan blue dye demonstrated that the hollow microneedles remained intact after puncturing the outermost layer of cadaveric porcine skin. The carbon fibers underwent chemical modification in order to enable detection of hydrogen peroxide and ascorbic acid; electrochemical measurements were demonstrated using integrated electrode-hollow microneedle devices.
RESUMEN
BACKGROUND: The desire to immobilize, encapsulate, or entrap viable cells for use in a variety of applications has been explored for decades. Traditionally, the approach is to immobilize cells to utilize a specific functionality of the cell in the system. SCOPE OF REVIEW: This review describes our recent discovery that living cells can organize extended nanostructures and nano-objects to create a highly biocompatible nano//bio interface [1]. MAJOR CONCLUSIONS: We find that short chain phospholipids direct the formation of thin film silica mesophases during evaporation-induced self-assembly (EISA) [2], and that the introduction of cells alter the self-assembly pathway. Cells organize an ordered lipid-membrane that forms a coherent interface with the silica mesophase that is unique in that it withstands drying-yet it maintains accessibility to molecules introduced into the 3D silica host. Cell viability is preserved in the absence of buffer, making these constructs useful as standalone cell-based sensors. In response to hyperosmotic stress, the cells release water, creating a pH gradient which is maintained within the nanostructured host and serves to localize lipids, proteins, plasmids, lipidized nanocrystals, and other components at the cellular surface. This active organization of the bio/nano interface can be accomplished during ink-jet printing or selective wetting-processes allowing patterning of cellular arrays-and even spatially-defined genetic modification. GENERAL SIGNIFICANCE: Recent advances in the understanding of nanotechnology and cell biology encourage the pursuit of more complex endeavors where the dynamic interactions of the cell and host material act symbiotically to obtain new, useful functions. This article is part of a Special Issue entitled Nanotechnologies - Emerging Applications in Biomedicine.
Asunto(s)
Membrana Celular/química , Células/química , Lípidos/química , Nanoestructuras/química , Nanotecnología , Animales , HumanosRESUMEN
Herein is described the fabrication and use of a plastic multilayer 3-channel microfluidic fixture. Multilayer devices were produced by laser machining of plastic polymethylmethacrylate and polyethyleneterapthalate laminates by ablation. The fixture consisted of an array of nine individually addressable gold or gold/ITO working electrodes, and a resistive platinum heating element. Laser machining of both the fluidic pathways in the plastic laminates, and the stencil masks used for thermal evaporation to form electrode regions on the plastic laminates, enabled rapid and inexpensive implementation of design changes. Electrochemiluminescence reactions in the fixture were achieved and monitored through ITO electrodes. Electroaddressable aryl diazonium chemistry was employed to selectively pattern gold electrodes for electrochemical multianalyte DNA detection from double stranded DNA (dsDNA) samples. Electrochemical detection of dsDNA was achieved by melting of dsDNA molecules in solution with the integrated heater, allowing detection of DNA sequences specific to breast and colorectal cancers with a non-specific binding control. Following detection, the array surface could be renewed via high temperature (95 °C) stripping using the integrated heating element. This versatile and simple method for prototyping devices shows potential for further development of highly integrated, multi-functional bioanalytical devices.
RESUMEN
We report a unique approach in which living cells direct their integration into 3D solid-state nanostructures. Yeast cells deposited on a weakly condensed lipid/silica thin film mesophase actively reconstruct the surface to create a fully 3D bio/nano interface, composed of localized lipid bilayers enveloped by a lipid/silica mesophase, through a self-catalyzed silica condensation process. Remarkably, this integration process selects exclusively for living cells over the corresponding apoptotic cells (those undergoing programmed cell death), via the development of a pH gradient, which catalyzes silica deposition and the formation of a coherent interface between the cell and surrounding silica matrix. Added long-chain lipids or auxiliary nanocomponents are localized within the pH gradient, allowing the development of complex active and accessible bio/nano interfaces not achievable by other synthetic methods. Overall, this approach provides the first demonstration of active cell-directed integration into a nominally solid-state three-dimensional architecture. It promises a new means to integrate "bio" with "nano" into platforms useful to study and manipulate cellular behavior at the individual cell level and to interface living organisms with electronics, photonics, and fluidics.
Asunto(s)
Lípidos/química , Microscopía Electrónica de Rastreo/métodos , Nanoestructuras/química , Dióxido de Silicio/química , Materiales Biocompatibles , Técnicas Biosensibles , Concentración de Iones de Hidrógeno , Membrana Dobles de Lípidos , Ensayo de Materiales , Microscopía Confocal/métodos , Microscopía Fluorescente/métodos , Nanotecnología/métodos , Saccharomyces cerevisiae/metabolismo , Dispersión de Radiación , Propiedades de SuperficieRESUMEN
It is postulated that in addition to cell density, other factors such as the dimensions and diffusional characteristics of the environment could influence quorum sensing (QS) and induction of genetic reprogramming. Modeling studies predict that QS may operate at the level of a single cell, but, owing to experimental challenges, the potential benefits of QS by individual cells remain virtually unexplored. Here we report a physical system that mimics isolation of a bacterium, such as within an endosome or phagosome during infection, and maintains cell viability under conditions of complete chemical and physical isolation. For Staphylococcus aureus, we show that quorum sensing and genetic reprogramming can occur in a single isolated organism. Quorum sensing allows S. aureus to sense confinement and to activate virulence and metabolic pathways needed for survival. To demonstrate the benefit of confinement-induced quorum sensing to individuals, we showed that quorum-sensing bacteria have significantly greater viability over non-QS bacteria.
Asunto(s)
Percepción de Quorum/genética , Staphylococcus aureus/genética , Endosomas/metabolismo , Eliminación de Gen , Regulación Bacteriana de la Expresión Génica , Proteínas Fluorescentes Verdes/química , Cinética , Modelos Biológicos , Modelos Genéticos , Mutación , Nanotecnología/métodos , Fagocitosis , Fagosomas/metabolismo , Virulencia/genética , Factores de Virulencia/genéticaRESUMEN
A simple procedure for introducing functional exogenous membrane-bound proteins to viable cells encapsulated within a lipid templated silica nanostructure is described. In one method, bacteriorhodopsin (bR) was added directly to a Saccharomyces cerevisiae solution along with short zwitterionic diacylphosphatidylcholines (diC(6) PC) and mixed with equal volumes of a sol precursor solution. Alternatively, bR was first incorporated into liposomes (bR-proteoliposomes) and then added to an S. cerevisiae solution with diC(6) PC, and this was followed by mixing with sol precursor solution. Films prepared from bR added directly to diC(6) PC resulted in bR localization near S. cerevisiae cells in a disordered and diffuse fashion, while films prepared from bR-proteoliposomes added to the diC(6) PC/yeast solution resulted in preferential localization of bR near yeast cell surfaces, forming bR-containing multilayer vesicles. Importantly, bR introduced via proteoliposomes was observed to modulate pH gradients developed at the cell surface, demonstrating both retained functionality and preferential orientation. Localization of liposome lipid or bR did not occur around neutrally charged latex beads acting as cell surrogates, demonstrating that living cells actively organize the multilayered lipid during evaporation-induced self-assembly. We expect this simple procedure for introducing functional and oriented membrane-bound proteins to the surface of cells to be general and adaptable to other membrane-bound proteins. This advance may prove useful in fundamental studies of membrane protein function and cell-cell signaling and in imparting non-native characteristics to arbitrary cells.
Asunto(s)
Bacteriorodopsinas/química , Nanoestructuras/química , Saccharomyces cerevisiae/química , Dióxido de Silicio/química , Bacteriorodopsinas/metabolismo , Liposomas/química , Liposomas/metabolismo , Fosfatidilcolinas/química , Fosfatidilcolinas/metabolismo , Saccharomyces cerevisiae/metabolismoAsunto(s)
Oro/química , Membranas Artificiales , Nanopartículas/química , Nanopartículas/ultraestructura , Nanoestructuras/química , Nanoestructuras/ultraestructura , Fotoquímica/métodos , Cristalización/métodos , Calor , Iones , Sustancias Macromoleculares/química , Conformación Molecular , Nanotecnología/métodos , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
A multifunctional thin film surface capable of immobilizing two diverse molecules on a single gold electrode was prepared by consecutive electrodeposition of nitrophenyl and phenylboronic acid pinacol ester (PBA-PE) diazonium salts. Activation of the stacked film toward binding platinum nanoparticles (PtNPs) and yeast cells occurred via chemical deprotection of the pinacol ester followed by electroreduction of nitro to amino groups. FTIR spectral analysis was used to study and verify film composition at each stage of preparation. The affect of electrodeposition protocol over the thickness of the nitrophenyl and PBA-PE layers was explored and had a profound impact on the film properties. Thicker nitrophenyl films led to diminished PBA-PE diazonium reduction currents during assembly and decreased phenylboronic acid (PBA) layer thickness while allowing for higher PtNP loading and catalytic currents from PtNP-mediated peroxide reduction. Multilayer PBA films could be formed over the nitrophenyl film; however, only submonlayer PBA films permitted access to the underlying layer. The sequence of functional group activation toward binding was also shown to be significant, as perchlorate used to remove pinacol ester also converted aminophenyl groups accessible to the solution to nitrophenyl groups, preventing electrostatic PtNP binding. Finally, SEM images show PtNPs immobilized in close proximity (nanometers) to captured yeast cells on the PBA-aminophenyl-Au film. Such multibinding functionality films that maintain conductivity for subsequent electrochemical measurements hold promise for the development of electrochemical and/or optical platforms for fundamental cell studies, genomic and proteomic analysis, and biosensing.