Biochar-mediated bioremediation: a sustainable strategy to increase Avena sativa L. tolerance to crude oil soil contamination.

The present work investigated the effects of different doses of biochar (2.5%, 5%, 10%), a by-product of the pyrolysis of woody biomass, on the growth of oat plants (Avena sativa L., cv "Danko") grown under different crude oil concentrations (0.5%, 1%, 2%, 3%, 6%) added to the soil, evaluating both biometric (i.e. fresh weight) and biochemical (i.e., content of malondialdehyde and proline, and total antioxidant power) parameters. The findings indicate that biochar positively influences the fresh weight of oat plants across all concentrations of crude oil investigated. On the other hand, regarding oxidative stress, measured by malondialdehyde and proline content, biochar led to a significant reduction, with statistical significance observed at biochar concentrations > 2.5% and crude oil levels > 2% (malondialdehyde: ranging from -25% to -38%; proline ranging from -33% to -52%). Soil amendment with biochar increased the total antioxidant power, particularly at biochar concentrations > 2.5% and crude oil levels > 2% (ranging from + 20% to + 98%). These results suggest that biochar has a great potential in mitigating the negative effects of crude oil contamination on plant growth and oxidative stress levels, thereby highlighting its value as a conditioner in contaminated soils.

Nature-based solutions for monitoring the impact of vehicular particulate matter and for the preventive conservation of the Palatine Hill archaeological site in Rome, Italy.

Magnetic and chemical biomonitoring methodologies were applied to the southern slopes of the Palatine Hill archaeological area in Rome, Italy. Plant leaves and lichen transplants were respectively sampled and exposed between July 2022 and June 2023 to assess the impact of vehicular particulate matter from Via dei Cerchi, a trafficked road coasting Circus Maximus, towards the archaeological area upon the Palatine Hill. The magnetic properties of leaves and lichens, inferred from magnetic susceptibility, hysteresis loops and first order reversal curves, were combined with the concentration of trace elements. It was demonstrated that the bioaccumulation of magnetite-like particles, associated with tracers of vehicular emissions, such as Ba and Sb, decreased with longitudinal distance from the road, without any important influence of elevation from the ground. Lichens demonstrated to be more efficient biomonitors of airborne PM than leaves, irrespective of the plant species. Conversely, leaves intercepted and accumulated all PM fractions, including road dusts and resuspended soil particles. Thus, plant leaves are suitable for providing preventive conservation services that limit the impact of particulate pollution on cultural heritage sites within busy metropolitan contexts.

Suitability of XRF for Routine Analysis of Multi-Elemental Composition: A Multi-Standard Verification.

This study investigated the suitability of X-ray fluorescence (XRF) analysis for routine multi-elemental composition analysis, checking its analytical capabilities by measuring a wide array of certified reference materials of soil and plant origin. A portable XRF analyzer was used to evaluate 32 soil and 12 plant standard materials, using both the Soil and Geochem mode, with sequential beams, allowing the detection of a wide range of elements. Recovery rates were calculated by comparing XRF measurements with certified values, and their correlations were verified through the Spearman coefficient. The results demonstrated the reliability of XRF measurements for soil samples, with a large number of elements showing a good or very good recovery and strong correlations with certified values. For plant samples, XRF largely overestimated the certified values, but the strong statistically significant correlations for almost all tested elements allowed us to correct this systematic bias, using the reported median value for dividing the value obtained via XRF. The Geochem mode emerged as more reliable for a larger number of elements. It was concluded that XRF may be a suitable alternative to ICP-MS in routine multi-elemental composition analysis.

Integration of ecological indicators to assess a multitemporal impact of cement industries.

The present study evaluated an integrated biomonitoring approach based on three different bioindicators: tree rings, lichens, and beetles in a complex environment (urban-industrial-forest). In Central Italy, four sampling sites were selected to assess the anthropogenic impact of cement plants taking into account (1) long-term exposure (1988-2020) through the analysis of trace elements in tree rings of Quercus pubescens; (2) medium-term exposure (2020-2021) through the analysis of trace elements in thalli (outermost portions) of the lichen Xanthoria parietina; (3) short-term exposure in spring 2021 through the bioaccumulation and evaluation of sample vitality in transplants of the lichen Evernia prunastri and a periodic survey of entomological biodiversity carried out during spring and summer 2021. Trace elements of industrial origin were found in tree rings, with different levels of accumulation between 1988 and 2020 and a maximum in 2012. Native thalli of the lichen X. parietina showed an overall low bioaccumulation of trace elements except for Cr, probably reflecting the influence of national lockdown measures. The transplants of E. prunastri showed a weak stress response in the industrial and urban sites, but not in the forest, and identified Tl and V as the main elements contributing to atmospheric contamination, with peaks at the industrial sites. Concerning the beetles, a significantly lower number of species was found at the Semonte industrial site.

Wood Distillate Promotes the Tolerance of Lettuce in Extreme Salt Stress Conditions.

Soil salinization is an adverse phenomenon in agriculture that severely affects crop growth and yield. The use of natural products, such as wood distillate (WD, derived from the pyrolysis of woody biomass), could be a sustainable approach to enhance the tolerance of plants cultivated in the saline soils. Hence, this study aimed to evaluate the potential of WD, a foliar sprayed at 0.2% (v/v), in lettuce plants subjected to grow under both moderate and high soil sodium chloride (NaCl) concentrations (ranging from 0 to 300 mM). The changes in the physiological and biochemical responses of these plants to the varying salt stress conditions allowed the identification of a maximum tolerance threshold (100 mM NaCl), specific to lettuce. Beyond this threshold, levels related to plant defense antioxidant power (antiradical activity) were lowered, while those indicative of oxidative stress (malondialdehyde content and electrolyte leakage) were raised, causing significant losses in leaf fresh biomass. On the other hand, WD significantly improved plant growth, enabling plants to survive high salt conditions >200 mM NaCl. Collectively, these observations highlight that treatments with WD could be of paramount importance in coping with current environmental challenges to have better yields under soil conditions of high salt concentrations.

Hormetic Effect of Wood Distillate on Hydroponically Grown Lettuce.

The addition of biostimulants to nutrient solutions of hydroponically grown crops to speed up plant growth and improve plant yield and quality has been attracting more and more attention. This study investigated the effects of wood distillate (WD) addition to hydroponically grown lettuce (Lactuca sativa L.) plants. Two concentrations of WD, 0.2% and 0.5%, were added to the nutrient solution, and biometric (i.e., leaf fresh weight, root fresh weight, root length and root surface area), photosynthetic (i.e., chlorophyll a, chlorophyll b, and carotenoid content) and biochemical (i.e., electrolyte leakage, total polyphenols, total flavonoids, and total antioxidant power content) parameters were evaluated. The effects of WD were hormetic, as the 0.2% concentration stimulated biometric and biochemical parameters, while the 0.5% concentration inhibited plant growth. Based on these results, it can be suggested that the addition of 0.2% WD to the nutrient solution has a stimulating effect on the growth of lettuce plants, and could be a successful strategy to boost the yield of crops grown hydroponically.

Can lettuce plants grow in saline soils supplemented with biochar?

Salt stress is presently a major environmental concern, given the huge number of soils affected by the presence of dissolved salts. Therefore, it is necessary to find solutions, preferably nature-based ones, to deal with this problem. In this study, biochar, a product made from plant biomass residues through the process of pyrolysis, was tested to alleviate salt stress on lettuce (Lactuca sativa L.) plants. Six different concentrations of NaCl were tested: 0, 50, 100, 200, 300 and 400 mM with and without the addition of 5% (w/w) biochar. Biochar ability to mitigate salinity damage was assessed by means of both biometric (fresh weight), physiological (chlorophyll content), and biochemical (i.e., electrolyte leakage, total antioxidant power, total soluble proteins, free amino acids, and mineral content) parameters. The experiment lasted four weeks. The results showed that NaCl has a negative effect from the concentration of 100-200 mM and that biochar was to some extent effective in mitigating the negative effects of salt on plant physiology; nevertheless, biochar failed to counteract Na accumulation. Similarly, biochar did not influence the content of free amino acids in lettuce leaves, but enhanced the expression of several parameters, such as total antioxidant power, fresh weight, chlorophyll content, total soluble protein, K content, although only clearly evident in some cases. Overall, the present study showed that biochar is a viable solution to counteract the damage caused by high salt concentrations on plant growth.

Traceability and authentication in agri-food production: A multivariate approach to the characterization ofthe Italian food excellence elephant garlic (Allium ampeloprasum L.), a vasoactive nutraceutical.

A research platform for food authentication was set up by combining stable isotope ratio analysis, metabolomics by gas and liquid mass-spectrometry and NMR investigations, chemometric analyses for food excellences. This multi-analytical approach was tested on samples of elephant garlic (Allium ampeloprasum L.), a species belonging to the same genus of common garlic (Allium ampeloprasum L.), mainly produced in southern Tuscany-(Allium ampeloprasum). The isotopic composition allowed the product to be geographically characterized. Flavonoids, like (+)-catechin, cinnamic acids, quercetin glycosides were identified. The samples showed also a significant amount of dipeptides, sulphur-containing metabolites and glutathione, the latter of which could be considered a molecular marker of the analyzed elephant garlic. For nutraceutical profiling to reach quality labels, extracts were investigated in specific biological assays, displaying interesting vasorelaxant properties in rat aorta by mediating nitric oxide release from the endothelium and exhibited positive inotropic and negative chronotropic effects in rat perfused heart.

Accumulation and Release of Cadmium Ions in the Lichen Evernia prunastri (L.) Ach. and Wood-Derived Biochar: Implication for the Use of Biochar for Environmental Biomonitoring.

Biochar (BC) boasts diverse environmental applications. However, its potential for environmental biomonitoring has, surprisingly, remained largely unexplored. This study presents a preliminary analysis of BC's potential as a biomonitor for the environmental availability of ionic Cd, utilizing the lichen Evernia prunastri (L.) Ach. as a reference organism. For this purpose, the lichen E. prunastri and two types of wood-derived biochar, biochar 1 (BC1) and biochar 2 (BC2), obtained from two anonymous producers, were investigated for their ability to accumulate, or sequester and subsequently release, Cd when exposed to Cd-depleted conditions. Samples of lichen and biochar (fractions between 2 and 4 mm) were soaked for 1 h in a solution containing deionized water (control), 10 µM, and 100 µM Cd2+ (accumulation phase). Then, 50% of the treated samples were soaked for 24 h in deionized water (depuration phase). The lichen showed a very good ability to adsorb ionic Cd, higher than the two biochar samples (more than 46.5%), and a weak ability to release the metal (ca. 6%). As compared to the lichen, BC2 showed a lower capacity for Cd accumulation (-48%) and release (ca. 3%). BC1, on the other hand, showed a slightly higher Cd accumulation capacity than BC2 (+3.6%), but a release capacity similar to that of the lichen (ca. 5%). The surface area and the cation exchange capacity of the organism and the tested materials seem to play a key role in their ability to accumulate and sequester Cd, respectively. This study suggests the potential use of BC as a (bio)monitor for the presence of PTEs in atmospheric depositions and, perhaps, water bodies.

Dose-Dependent Effects of a Corn Starch-Based Bioplastic on Basil (Ocimum basilicum L.): Implications for Growth, Biochemical Parameters, and Nutrient Content.

Plastic pollution is a pressing global issue, prompting the exploration of sustainable alternatives such as bioplastics (BPs). In agriculture, BPs have gained relevance as mulching films. This study investigated the effect of the presence in the soil of different concentrations (0-3%, w/w) of a corn starch-based bioplastic on basil (Ocimum basilicum L.). The results showed that increasing bioplastic concentration reduced shoot fresh biomass production. Biochemical analyses revealed changes in the shoot in soluble protein content, biomarkers of oxidative and osmotic stress (malondialdehyde and proline, respectively), anti-radical activity, and antioxidant compounds (phenols, flavonoids, and ascorbic acid), which are indicative of plant adaptive mechanisms in response to stress caused by the presence of the different concentrations of bioplastic in the soil. Macro- and micronutrient analysis showed imbalances in nutrient uptake, with a decreased content of potassium, phosphorus, and manganese, and an increased content of magnesium, iron, and copper in the shoot at high BP concentrations.

Atmospheric pollution by potentially toxic elements: measurement and risk assessment using lichen transplants.

The lichen Usnea articulata collected from an unpolluted area was exposed for 6 months at 26 sites for the sample chosenusing a stratified random design, and the content of potentially toxic elements (PTEs) including As, Cd, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Sn, V, and Zn, was assessed using ICP-MS. The health risk for both adults and children was then calculated using the PTEs concentrations. The results showed that despite the hostile urban conditions, transplanted lichens depicted clear deposition patterns of airborne PTEs, mostly associated with industrial sites, where As and other elements showed remarkably high values. The cumulative hazard index was below the risk threshold, both for adults and children. For the entire population (particularly children) residing in areas surrounding industrial sites, As and Cr appeared to be potentially carcinogenic elements.

Robinia pseudoacacia L. (Black Locust) Leaflets as Biomonitors of Airborne Microplastics.

Here we investigate the suitability of Robinia pseudoacacia L. (black locust) leaflets as a novel biomonitor of airborne microplastics (MPs) including tyre wear particles (TWPs). Leaflets were collected from rural roadside locations (ROs, n = 5) and urban parks (UPs, n = 5) in Siena, Italy. MPs were removed by washing, identified by stereomicroscope, and analysed for polymer type by Fourier transform infrared spectroscopy. Daily MP deposition was estimated from leaf area. The mass magnetic susceptibility and the bioaccumulation of traffic-related potentially toxic elements (PTEs) were also analysed. The total number of MPs at ROs was significantly higher at 2962, dominated by TWPs, compared with 193 in UPs, where TWPs were not found. In contrast, total microfibres were significantly higher in UPs compared with ROs (185 vs. 86). Daily MP deposition was estimated to range from 4.2 to 5.1 MPs/m2/d across UPs and 29.9-457.6 MPs/m2/d across ROs. The polymer types at ROs were dominated by rubber (80%) from TWPs, followed by 15% polyamide (PA) and 5% polysulfone (PES), while in UPs the proportion of PES (44%) was higher than PA (22%) and polyacrylonitrile (11%). The mean mass magnetic susceptibility, a proxy of the bioaccumulation of traffic-related metallic particles, was higher at ROs (0.62 ± 0.01 10-8 m3/kg) than at UPs (-0.50 ± 0.03 10-8 m3/kg). The content of PTEs was similar across sites, except for significantly higher concentrations of Sb, a tracer of vehicle brake wear, at ROs (0.308 ± 0.008 µg/g) compared with UPs (0.054 ± 0.006 µg/g). Our results suggest that the waxy leaflets and easy determination of surface area make Robinia an effective biomonitor for airborne MPs including TWPs.

Resilience of Xanthoria parietina under Mars-like conditions: photosynthesis and oxidative stress response.

MAIN CONCLUSION: Xanthoria parietina survivability in Mars-like conditions was supported by water-lysis efficiency recovery and antioxidant content balancing with ROS production after 30 days of exposure. Xanthoria parietina (L.) Th. Fr. is a widespread lichen showing tolerance against air pollutants and UV-radiation. It has been tested under space-like and Mars-like conditions resulting in high recovery performances. Hereby, we aim to assess the mechanisms at the basis of the thalli resilience against multiple space stress factors. Living thalli of X. parietina were exposed to simulated Martian atmospheric conditions (Dark Mars) and UV radiation (Full Mars). Then, we monitored as vitality indicator the photosynthetic efficiency, assessed by in vivo chlorophyll emission fluorescence measurements (FM; FV/F0). The physiological defense was evaluated by analyzing the thalli antioxidant capacity. The drop of FM and FV/F0 immediately after the exposure indicated a reduction of photosynthesis. After 24 h from exposure, photosynthetic efficiency began to recover suggesting the occurrence of protective mechanisms. Antioxidant concentrations were higher during the exposure, only decreasing after 30 days. The recovery of photosynthetic efficiency in both treatments suggested a strong resilience by the photosynthetic apparatus against combined space stress factors, likely due to the boosted antioxidants at the beginning and their depletion at the end of the exposure. The overall results indicated that the production of antioxidants, along with the occurrence of photoprotection mechanisms, guarantee X. parietina survivability in Mars-like environment.

Nutritionally enriched tomatoes (Solanum lycopersicum L.) grown with wood distillate: chemical and biological characterization for quality assessment.

Bio-based products are nowadays useful tools able to affect the productivity and quality of conventionally cultivated crops. Several bio-based products are currently on the market; one of the newest and most promising is the wood distillate (WD) derived from the pyrolysis process of waste biomass after timber. Its foliar application has been widely investigated and shown to promote the antioxidant profile of cultivated crops. WD was used here as additive for the cultivation of tomato (Solanum lycopersicum L.) plants. The application improved quality (chemical) parameters, minerals, polyphenols, and lycopene contents of tomato fruits. The extracts of WD-treated and untreated tomatoes have been chemically and biologically characterized. The 1 H-NMR and ESI-mass spectrometry analyses of the extracts revealed the presence of different fatty acids, amino acids and sugars. In particular, the WD-treated tomatoes showed the presence of pyroglutamic acid and phloridzin derivatives, but also dihydrokaempferol, naringenin glucoside, cinnamic acid, and kaempferol-3-O-glucoside. When tested in cells, the extracts showed a promising anti-inflammatory profile in lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. Furthermore, the extracts displayed a slight vasorelaxant activity on rat aorta rings (either endothelium-denuded or endothelium-intact) pre-contracted with phenylephrine or potassium chloride. PRACTICAL APPLICATION: Wood distillate has been used for tomato plant growth. Tomatoes showed improved nutritional parameters, and their extracts displayed antioxidant and anti-inflammatory activities.

Climate Change Dependence in Ex Situ Conservation of Wild Medicinal Plants in Crete, Greece.

Over 80% of the global population addresses their primary healthcare needs using traditional medicine based on medicinal plants. Consequently, there's a rising demand for these plants for both household and industrial use at local, regional, national, and international levels. However, wild harvesting has negatively impacted natural ecosystems. Cultivating medicinal species has been proposed as a conservation strategy to alleviate this pressure. Yet, in this age of global climate change concerns, smallholder farmers' views on the benefits of such cultivation clash with the uncertainties of climate change impacts, amplifying their anxieties. In this context, the climate change dependence of ex situ cultivation of ten wild medicinal taxa with significant ethnopharmacological interest in Crete, Greece, were studied, projecting their potential habitat suitability under various future climate scenarios. The results demonstrated species-specific effects. Based on the potential cultivation area gains and losses, these effects can be categorized into three groups. We also outlined the spatial patterns of these gains and losses, offering valuable insights for regional management strategies benefiting individual practitioners.

Tree-rings analysis to reconstruct atmospheric mercury contamination at a historical mining site.

Mercury (Hg) is a global environmental concern due to its toxicity (especially high in methylated form) and the long-range distribution of its gaseous elemental form (GEM). Hg-contaminated areas, such as abandoned mining sites, pose intrinsic difficulties for their management and heavy monitoring costs. In these environments, plant-based solutions may play a key role in the ecosystem quality assessment and support remediation strategies, combining reliability and cost-effectiveness. In this study, we adopted a biomonitoring approach by using tree rings of four different species collected in the proximity of the mining-metallurgical area of Abbadia San Salvatore, central Italy, a major former Hg mining district whose reclamation is currently in progress. Our dendrochemical analysis was aimed at identifying the historical changes of local atmospheric Hg contamination and at singling out, for the first time in the study area, other potentially toxic elements (PTEs) associated with the past mining activity. Collected cores dated back to early as 1940 and provided the temporal patterns of atmospheric Hg emission vs the produced liquid quantities, so reconstructing the historical impact of the mining site on nearby terrestrial ecosystems and resident human population. Current GEM contamination was found about twenty times lower than that of the fully operational mine periods. From a first survey on other PTEs, thallium (Tl) and lead (Pb) appeared to be potentially associated with the mining activity, thus suggesting new working assumptions for further dendrochemical analyses and for the inclusion of Pb in human biomonitoring surveys of the Mt. Amiata area, actually not present in the control list. The results prompt a more thorough assessment by tracking for a longer time span a critical site that is an ideal open-field lab to study the ecophysiology of different tree species in relation to environmental behavior of PTEs for better-assessing wildlife and human exposures.

Dose-Dependent and Species-Specific Effects of Wood Distillate Addition on the Germination Performance of Threatened Arable Plants.

Wood distillate (WD) is a bio-based product applied to crop plants for its known action in terms of growth promotion and yield enhancement, but studies are lacking on its effects on the germination of arable plants. To test such effects, we applied WD at six different concentrations on the diaspores of three threatened arable plants: Bromus secalinus, Centaurea cyanus, and Legousia speculum-veneris. For all the studied species, the effect of WD was dose-dependent and species-specific. In B. secalinus, the germination percentage (GP) decreased at 0.125% WD but then remained stable at higher concentrations up to 1%. At 2% WD, almost no germination was observed. Mean germination time (MGT) was not influenced up to 1% WD but significantly increased at 2% WD. The germination rate index (GRI) and germination energy (GE) remained unaffected up to 1% WD but decreased at 2% WD. In C. cyanus, WD had no effects on GP and GE at any concentration. MGT showed no difference with the control up to 1% WD, but significantly increased at 2% WD. GRI increased only at low concentrations (0.125% and 0.25%). The germination performance of L. speculum-veneris was unaffected up to 0.25% WD for all the tested parameters. From 0.5% WD, a reduction in GP, GRI, and GE and an increase in MGT were observed. At 2% WD, germination was totally blocked. Our results suggest that using WD at low concentrations (<0.5%), those commonly used in arable crops, does not affect the germination of the three investigated plant species.

Exploring sustainable alternatives: Wood distillate alleviates the impact of bioplastic in basil plants.

The growing interest in bioplastics and bio-based crop management products in agriculture is driven by the Sustainable Development Goals of the 2030 Agenda. However, recent research has raised concerns about the sustainability of bioplastics due to their potential negative impact on crop growth and yield, with implications for the environment and human health. In this study, wood distillate (WD) was evaluated as a natural enhancer of plant growth and defence system to mitigate the negative impact of a starch-based bioplastic on basil (Ocimum basilicum L.) plants. The study analyzed physiological and biochemical changes in basil plants subjected for 35 days to single or combined treatments of WD and bioplastic by measuring biomarkers of healthy growth, such as soluble proteins, sugars, vitamin C, and malondialdehyde (MDA). The results showed that WD promoted basil development, whereas the presence of bioplastic hindered it. Interestingly, WD did not affect sugars but increased vitamin C by 12 %, which is considered a positive effect as changes in sugar levels could indicate plant stress. In contrast, bioplastic resulted in reduced sugars (-41 %) and increased (+17 %) MDA level, while vitamin C content remained unchanged. However, when WD was added to plants grown with bioplastic, it elevated the levels of all examined parameters, except for sugars and vitamin C, which experienced reductions (-66 % and 33 %, respectively). Intriguingly, despite this reduction, the observed direct correlation between sugar and vitamin C contents was maintained, indicating that the decrease in sugar content may have reached a critical threshold. This study suggests that the use of WD has the potential to alleviate the adverse effects of bioplastic on basil growth and development and highlights the importance of adopting sustainable practices in agriculture, as well as the need for a critical assessment of the environmental impact of new technologies and products.

Microplastic contamination of lettuces grown in urban vegetable gardens in Lisbon (Portugal).

Urban vegetable gardens are very often a feature of cities that want to offer their citizens a more sustainable lifestyle by producing their own food products. However, cities can have significant pollution levels (or pollution hotspots) due to specific sources of pollution, such as traffic. Among the various pollutants, microplastics (MPs) are emerging as a consensual concern due to the awareness of the environmental contamination, their bioaccumulation potential and human intake, and, consequently unknown human health impacts. The present study compared the content of MPs in lettuce plants cultivated in Lisbon urban gardens with those cultivated in a rural area, as well as samples bought in supermarkets. Microplastics were detected in all washed leaves, with mean levels ranging from 6.3 ± 6.2 to 29.4 ± 18.2 MPs/g. Lettuce grown in urban gardens from areas with high traffic density showed higher MPs levels. Weak positive Spearman's rank correlations were found between MPs content and concentrations of Cu and S (determined by Particle Induced X-Ray Emission, PIXE), suggesting a possible role of traffic contribution to MPs levels, as both elements are considered traffic-source tracers. These results contribute to shed light on the MP contamination of vegetables grown in such urban environments, that may represent a potential MP exposure route through the dietary intake, corresponding to a 70% increase in annual MP intake compared to lettuces bought in supermarkets.

Effect of Biochar Type, Concentration and Washing Conditions on the Germination Parameters of Three Model Crops.

Biochar has been recognized as a promising and efficient material for soil amendment. However, its effects on seed germination are variable due to its alkaline pH and/or the presence of phytotoxic substances. In this study, two types of biochar (B1 and B2) were mixed with soil at different concentrations (0%, 5%, 10%, 25%, 50% and 100%, w:w), and both the solid and liquid fractions of these mixtures were tested on the germination of basil, lettuce and tomato seeds. Furthermore, solid fractions subjected to a pre-washing treatment (B1W and B2W) were also investigated for their effects on seed germination. Three germination parameters were then measured: seed germination number (GN), radicle length (RL) and germination index (GI). Biochar B2W at 10% increased both RL and GI in basil by 50% and 70%, respectively, while B1 at 25% increased these parameters in tomato by 25%. No effects or negative effects were recorded for lettuce. Liquid fractions (L1 and L2) generally hampered seed germination, suggesting the presence of potentially water-soluble phytotoxic compounds in biochar. These results point to biochar as a suitable component for germination substrates and highlight that germination tests are critical to select the best performing biochar according to the target crop.