RESUMEN
The introduction of fifth-generation (5G) mobile networks leads to an increase in energy consumption and higher operational costs for mobile network operators (MNOs). Consequently, the optimization of 5G networks' energy efficiency is crucial, both in terms of reducing MNO costs and in terms of the negative environmental impact. However, many aspects of the 5G mobile network technology itself have been standardized, including the 5G network slicing concept. This enables the creation of multiple independent logical 5G networks within the same physical infrastructure. Since the only necessary resources in 5G networks need to be used for the realization of a specific 5G network slice, the question of whether the implementation of 5G network slicing can contribute to the improvement of 5G and future sixth-generation networks' energy efficiency arises. To tackle this question, this review paper analyzes 5G network slicing and the energy demand of different network slicing use cases and mobile virtual network operator realizations based on network slicing. The paper also overviews standardized key performance indicators for the assessment of 5G network slices' energy efficiency and discusses energy efficiency in 5G network slicing lifecycle management. In particular, to show how efficient network slicing can optimize the energy consumption of 5G networks, versatile 5G network slicing use case scenarios, approaches, and resource allocation concepts in the space, time, and frequency domains have been discussed, including artificial intelligence-based implementations of network slicing. The results of the comprehensive discussion indicate that the different implementations and approaches to network slicing pave the way for possible further reductions in 5G MNO energy costs and carbon dioxide emissions in the future.
RESUMEN
The continuous real-time monitoring of human health using biomedical sensing devices has recently become a promising approach to the realization of distant health monitoring. In this paper, the piezoelectric characteristics of the silk fibroin (SF) natural polymer were analyzed as the material used for obtaining sensing information in the application of distance health monitoring. To enhance the SF piezoelectricity, this paper presents the development of a novel SF-based sensor realized by combining SF with different carbon nanofiber (CNF) densities, and for such newly developed SF-based sensors comprehensive performance analyses have been performed. Versatile methods including the scanning electron microscope, Fourier transform infrared spectroscopy, Raman and X-ray diffraction measurements and impedance analysis were used to study the morphologic, mechanical and electrical properties of the developed SF-based sensor. The SF with CNF samples was analyzed for three different pressure loads (40 N, 60 N and 80 N) in 500 compression test cycles. The analyses thoroughly describe how combining natural polymer SF with different CNF densities impacts the piezoelectricity and mechanical strength of the proposed SF-based sensor. The developed piezoelectric SF-based sensors were further tested on humans in real medical applications to detect generated piezoelectric voltage in versatile body movements. The maximum piezoelectricity equal to 2.95 ± 0.03 V was achieved for the jumping movement, and the SF sample with a CNF density equal to 0.4% was tested. Obtained results also show that the proposed SF-based sensor has an appropriate piezoelectric sensitivity for each of the analyzed body movement types, and that the proposed SF-based sensor can be applied in real medical applications as a biomedical sensing device. The proposed SF-based sensor's practical implementation is further confirmed by the results of cytotoxicity analyses, which show that the developed sensor has a non-toxic and biocompatible nature and can be efficiently used in skin contact for biomedical wearable health monitoring applications.
Asunto(s)
Fibroínas , Nanofibras , Dispositivos Electrónicos Vestibles , Humanos , Carbono/química , Fibroínas/química , Nanofibras/química , PolímerosRESUMEN
Due to the growing impact of the information and communications technology (ICT) sector on electricity usage and greenhouse gas emissions, telecommunication networks require new solutions which will enable the improvement of the energy efficiency of networks. Access networks, which are responsible for the last mile of connectivity and also for one of the largest shares in network energy consumption, are viable candidates for the implementation of new protocols, models and methods which will contribute to the reduction of the energy consumption of such networks. Among the different types of access networks, hybrid fiber-wireless (FiWi) networks are a type of network that combines the capacity and reliability of optical networks with the flexibility and availability of wireless networks, and as such, FiWi networks have begun to be extensively used in modern access networks. However, due to the advent of high-bandwidth applications and Internet of Things networks, the increased energy consumption of FiWi networks has become one of the most concerning challenges required to be addressed. This paper provides a comprehensive overview of the progress in approaches for improving the energy efficiency (EE) of different types of FiWi networks, which include the radio-and-fiber (R&F) networks, the radio-over-fiber networks (RoF), the FiWi networks based on multi-access edge computing (MEC) and the software-defined network (SDN)-based FiWi networks. It also discusses future directions for improving the EE in the FiWi networks.
RESUMEN
Due to the capability of the effective usage of the radio frequency spectrum, a concept known as cognitive radio has undergone a broad exploitation in real implementations. Spectrum sensing as a core function of the cognitive radio enables secondary users to monitor the frequency band of primary users and its exploitation in periods of availability. In this work, the efficiency of spectrum sensing performed with the energy detection method realized through the square-law combining of the received signals at secondary users has been analyzed. Performance evaluation of the energy detection method was done for the wireless system in which signal transmission is based on Multiple-Input Multiple-Output-Orthogonal Frequency Division Multiplexing. Although such transmission brings different advantages to wireless communication systems, the impact of noise variations known as noise uncertainty and the inability of selecting an optimal signal level threshold for deciding upon the presence of the primary user signal can compromise the sensing precision of the energy detection method. Since the energy detection may be enhanced by dynamic detection threshold adjustments, this manuscript analyses the influence of detection threshold adjustments and noise uncertainty on the performance of the energy detection spectrum sensing method in single-cell cognitive radio systems. For the evaluation of an energy detection method based on the square-law combining technique, the mathematical expressions of the main performance parameters used for the assessment of spectrum sensing efficiency have been derived. The developed expressions were further assessed by executing the algorithm that enabled the simulation of the energy detection method based on the square-law combining technique in Multiple-Input Multiple-Output-Orthogonal Frequency Division Multiplexing cognitive radio systems. The obtained simulation results provide insights into how different levels of detection threshold adjustments and noise uncertainty affect the probability of detection of primary user signals. It is shown that higher signal-to-noise-ratios, the transmitting powers of primary user, the number of primary user transmitting and the secondary user receiving antennas, the number of sampling points and the false alarm probabilities improve detection probability. The presented analyses establish the basis for understanding the energy detection operation through the possibility of exploiting the different combinations of operating parameters which can contribute to the improvement of spectrum sensing efficiency of the energy detection method.
Asunto(s)
Redes de Comunicación de Computadores , Tecnología Inalámbrica , Algoritmos , Cognición , IncertidumbreRESUMEN
The Internet of Health Things (IoHT) has emerged as an attractive networking paradigm in wireless communications, integrated devices and embedded system technologies. In the IoHT, real-time health data are collected through smart healthcare sensors and, in recent years, the IoHT has started to have an important role in the Internet of Things technology. Although the IoHT provides comfort in health monitoring, it also imposes security challenges in maintaining patient data confidentiality and privacy. To overcome such security issues, in this paper, a novel blockchain-based privacy-preserving authentication scheme is proposed as an approach for achieving efficient authentication of the patient without the involvement of a trusted entity. Moreover, a secure handover authentication mechanism that ensures avoiding the patient re-authentication in multi-doctor communication scenarios and revoking the possible malicious misbehavior of medical professionals in the IoHT communication with the patient is developed. The performance of the proposed authentication and handover scheme is analyzed concerning the existing state-of-the-art authentication schemes. The results of the performance analyses reveal that the proposed authentication scheme is resistant to different types of security attacks. Moreover, the results of analyses show that the proposed authentication scheme outperforms similar state-of-the-art authentication schemes in terms of having lower computational, communication and storage costs. Therefore, the novel authentication and handover scheme has proven practical applicability and represents a valuable contribution to improving the security of communication in IoHT networks.
Asunto(s)
Cadena de Bloques , Internet de las Cosas , Humanos , Privacidad , Confidencialidad , Seguridad Computacional , InternetRESUMEN
Cognitive radio (CR) technology has the potential to detect and share the unutilized spectrum by enabling dynamic spectrum access. To detect the primary users' (PUs) activity, energy detection (ED) is widely exploited due to its applicability when it comes to sensing a large range of PU signals, low computation complexity, and implementation costs. As orthogonal frequency-division multiplexing (OFDM) transmission has been proven to have a high resistance to interference, the ED of OFDM signals has become an important local spectrum-sensing (SS) concept in cognitive radio networks (CRNs). In combination with multiple-input multiple-output (MIMO) transmissions, MIMO-OFDM-based transmissions have started to become a widely accepted air interface, which ensures a significant improvement in spectral efficiency. Taking into account the future massive implementation of MIMO-OFDM systems in the fifth and sixth generation of mobile networks, this work introduces a mathematical formulation of expressions that enable the analysis of ED performance based on the square-law combining (SLC) method in MIMO-OFDM systems. The analysis of the ED performance was done through simulations performed using the developed algorithms that enable the performance analysis of the ED process based on the SLC in the MIMO-OFDM systems having a different number of transmit (Tx) and receive (Rx) communication branches. The impact of the distinct factors including the PU Tx power, the false alarm probability, the number of Tx and Rx MIMO branches, the number of samples in the ED process, and the different modulation techniques on the ED performance in environments with different levels of signal-to-noise ratios are presented. A comprehensive analysis of the obtained results indicated how the appropriate selection of the analyzed factors can be used to enhance the ED performance of MIMO-OFDM-based CRNs.
RESUMEN
Cognitive radio technology enables spectrum sensing (SS), which allows the secondary user (SU) to access vacant frequency bands in the periods when the primary user (PU) is not active. Due to its minute implementation complexity, the SS approach based on energy detection (ED) of the PU signal has been analyzed in this paper. Analyses were performed for detecting PU signals by the SU in communication systems exploiting multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) transmission technology. To perform the analyses, a new algorithm for simulating the ED process based on a square-law combining (SLC) technique was developed. The main contribution of the proposed algorithm is enabling comprehensive simulation analyses of ED performance based on the SLC method for versatile combinations of operating parameter characteristics for different working environments of MIMO-OFDM systems. The influence of a false alarm on the detection probability of PU signals impacted by operating parameters such as the signal-to-noise ratios, the number of samples, the PU transmit powers, the modulation types and the number of the PU transmit and SU receive branches of the MIMO-OFDM systems have been analyzed in the paper. Simulation analyses are performed by running the proposed algorithm, which enables precise selection of and variation in the operating parameters, the level of noise uncertainty and the detection threshold in different simulation scenarios. The presented analysis of the obtained simulation results indicates how the considered operating parameters impact the ED efficiency of symmetric and asymmetric MIMO-OFDM systems.
RESUMEN
In today's data networks, the main protocol used to ensure reliable communications is the transmission control protocol (TCP). The TCP performance is largely determined by the used congestion control (CC) algorithm. TCP CC algorithms have evolved over the past three decades and a large number of CC algorithm variations have been developed to accommodate various network environments. The fifth-generation (5G) mobile network presents a new challenge for the implementation of the TCP CC mechanism, since networks will operate in environments with huge user device density and vast traffic flows. In contrast to the pre-5G networks that operate in the sub-6 GHz bands, the implementation of TCP CC algorithms in 5G mmWave communications will be further compromised with high variations in channel quality and susceptibility to blockages due to high penetration losses and atmospheric absorptions. These challenges will be particularly present in environments such as sensor networks and Internet of Things (IoT) applications. To alleviate these challenges, this paper provides an overview of the most popular single-flow and multy-flow TCP CC algorithms used in pre-5G networks. The related work on the previous examinations of TCP CC algorithm performance in 5G networks is further presented. A possible implementation of TCP CC algorithms is thoroughly analysed with respect to the specificities of 5G networks, such as the usage of high frequencies in the mmWave spectrum, the frequent horizontal and vertical handovers, the implementation of the 5G core network, the usage of beamforming and data buffering, the exploitation of edge computing, and the constantly transmitted always-on signals. Moreover, the capabilities of machine learning technique implementations for the improvement of TCPs CC performance have been presented last, with a discussion on future research opportunities that can contribute to the improvement of TCP CC implementation in 5G networks. This survey paper can serve as the basis for the development of novel solutions that will ensure the reliable implementation of TCP CC in different usage scenarios of 5G networks.
RESUMEN
Cognitive radio (CR), as a concept based on the ability to detect and share the unutilised spectrum, has been envisioned as a promising candidate to improve the efficiency of frequency spectrum assignments. For the realisation of the CR concept, energy detection (ED), as one of the available spectrum sensing methods, is broadly considered because of its low computational complexity and implementation costs. Due to the vast usage of the orthogonal frequency division multiplexing (OFDM) technique in contemporary communication systems, the ED of OFDM signals in the CR networks has become important for practical realisation. Since the ED accuracy of the OFDM signals can be improved by the sensing threshold adaptation, this paper surveys the impact of noise variations and dynamic threshold (DT) adaptation on the ED performance of OFDM signals. Analyses were performed by the simulation of the ED related to OFDM signals transmitted in the margin or rate adaptive and combined margin and rate adaptive OFDM systems. The results obtained through extensive simulations provide fundamental insights into how different factors, including the transmission power, the signal to noise ratio, the false alarm probability and the sample quantity, affect the ED efficiency. Comprehensive analyses of the obtained results indicate the main ED weaknesses and how the appropriate selection of analysed factors can enhance the ED processes for different OFDM systems. The observed ED weaknesses were further thoroughly surveyed, and the open issues and challenges related to the enhancement of the main ED limitations have been elaborated. The presented survey results can serve as a basis for the improvement of a broadly accepted ED method in CR networks.
RESUMEN
As the rapid growth of mobile users and Internet-of-Everything devices will continue in the upcoming decade, more and more network capacity will be needed to accommodate such a constant increase in data volumes (DVs). To satisfy such a vast DV increase, the implementation of the fifth-generation (5G) and future sixth-generation (6G) mobile networks will be based on heterogeneous networks (HetNets) composed of macro base stations (BSs) dedicated to ensuring basic signal coverage and capacity, and small BSs dedicated to satisfying capacity for increased DVs at locations of traffic hotspots. An approach that can accommodate constantly increasing DVs is based on adding additional capacity in the network through the deployment of new BSs as DV increases. Such an approach represents an implementation challenge to mobile network operators (MNOs), which is reflected in the increased power consumption of the radio access part of the mobile network and degradation of network energy efficiency (EE). In this study, the impact of the expected increase of DVs through the 2020s on the EE of the 5G radio access network (RAN) was analyzed by using standardized data and coverage EE metrics. An analysis was performed for five different macro and small 5G BS implementation and operation scenarios and for rural, urban, dense-urban and indoor-hotspot device density classes (areas). The results of analyses reveal a strong influence of increasing DV trends on standardized data and coverage EE metrics of 5G HetNets. For every device density class characterized with increased DVs, we here elaborate on the process of achieving the best and worse combination of data and coverage EE metrics for each of the analyzed 5G BSs deployment and operation approaches. This elaboration is further extended on the analyses of the impact of 5G RAN instant power consumption and 5G RAN yearly energy consumption on values of standardized EE metrics. The presented analyses can serve as a reference in the selection of the most appropriate 5G BS deployment and operation approach, which will simultaneously ensure the transfer of permanently increasing DVs in a specific device density class and the highest possible levels of data and coverage EE metrics.
Asunto(s)
Conservación de los Recursos Energéticos , Fenómenos FísicosRESUMEN
Remote sensing is commonly performed via airborne platforms such as satellites, specialized aircraft, and unmanned aerial systems (UASs), which perform airborne photography using mounted cameras. However, they are limited by their coverage (UASs), irregular flyover frequency (aircraft), and/or low spatial resolution (satellites) due to their high altitude. In this paper, we examine the utilization of commercial flights as an airborne platform for remote sensing. Namely, we simulate a situation where all aircraft on commercial flights are equipped with a mounted camera used for airborne photography. The simulation is used to estimate coverage, the temporal and spatial resolution of aerial imagery acquired this way, as well as the storage capacity required for storing all imagery data. The results show that Europe is 83.28 percent covered with an average of one aerial photography every half an hour and a ground sampling distance of 0.96 meters per pixel. Capturing such imagery results in 20 million images or four petabytes of image data per day. More detailed results are given in the paper for separate countries/territories in Europe, individual commercial airlines and alliances, as well as three different cameras.
RESUMEN
Although information and communications technologies (ICTs) have the potential of enabling powerful social, economic and environmental benefits, ICT systems give a non-negligible contribution to world electricity consumption and carbon dioxide (CO2) footprint. This contribution will sustain since the increased demand for user's connectivity and an explosion of traffic volumes necessitate continuous expansion of current ICTs services and deployment of new infrastructures and technologies which must ensure the expected user experiences and performance. In this paper, analyses of costs for the global annual energy consumption of telecommunication networks, estimation of ICT sector CO2 footprint contribution and predictions of energy consumption of all connected user-related devices and equipment in the period 2011-2030 are presented. Since presented estimations of network energy consumption trends for main communication sectors by 2030 shows that highest contribution to global energy consumption will come from wireless access networks and data centres (DCs), the rest of the paper analyses technologies and concepts which can contribute to the energy-efficiency improvements of these two sectors. More specifically, different paradigms for wireless access networks such as millimetre-wave communications, Long-Term Evolution in unlicensed spectrum, ultra-dense heterogeneous networks, device-to-device communications and massive multiple-input multiple-output communications have been analysed as possible technologies for improvement of wireless networks energy efficiency. Additionally, approaches related to the DC resource management, DCs power management, green DC monitoring and thermal management in DCs have been discussed as promising approaches to improvement of DC power usage efficiency. For each of analysed technologies, future research challenges and open issues have been summarised and discussed. Lastly, an overview of the accepted papers in the Special Issue dedicated to the green, energy-efficient and sustainable networks is presented.
RESUMEN
Base stations represent the main contributor to the energy consumption of a mobile cellular network. Since traffic load in mobile networks significantly varies during a working or weekend day, it is important to quantify the influence of these variations on the base station power consumption. Therefore, this paper investigates changes in the instantaneous power consumption of GSM (Global System for Mobile Communications) and UMTS (Universal Mobile Telecommunications System) base stations according to their respective traffic load. The real data in terms of the power consumption and traffic load have been obtained from continuous measurements performed on a fully operated base station site. Measurements show the existence of a direct relationship between base station traffic load and power consumption. According to this relationship, we develop a linear power consumption model for base stations of both technologies. This paper also gives an overview of the most important concepts which are being proposed to make cellular networks more energy-efficient.