Botulinum Toxin Type A and Hyaluronic Acid Dermal Fillers in Dentistry: A Systematic Review of Clinical Application and Indications.

Background: Botulinum toxin type A (BoNT-A) and hyaluronic acid (HA) dermal fillers are increasingly utilized in dentistry for therapeutic and aesthetic purposes. However, a comprehensive synthesis of their clinical applications and indications in dentistry is lacking. This systematic review aimed to analyze the clinical application and indications of BoNT-A and HA dermal fillers in dentistry, providing insights into their efficacy, safety profiles, and limitations. Methods: A systematic search was conducted in PubMed/MEDLINE databases to identify relevant studies published between 2018 and 2024. Medical Subject Headings (MeSH) terms and keywords related to BoNT-A, HA dermal fillers, dentistry, clinical applications, and indications were used. Study selection criteria included randomized controlled trials (RCTs) and non-RCTs involving human participants of any age group. Data extraction and synthesis followed established guidelines, focusing on study characteristics, participant demographics, intervention details, outcome measures, and key findings related to BoNT-A and HA dermal fillers' clinical application in dentistry. Results: Systematic searches across electronic databases and grey literature identified 857 records, with an additional 73 from hand searches. After screening titles and abstracts, 542 records were excluded, leaving 374 full-text publications for evaluation. Ultimately, 12 RCTs and 13 non-RCTs were included. The systematic review encompassed diverse geographic locations: Brazil, Italy, Spain, Syria, India, Egypt, Korea, and the Netherlands, involving samples sizes ranging from 14 to 143 participants. The review synthesized findings on HA's efficacy in various areas, including bone repair, gingivitis management, temporomandibular joint disorders, postoperative swelling reduction, periodontal defect treatment, chin and check projection and lips augmentation. BoNT-A exhibited promising efficacy in managing orofacial pain conditions, gummy smile treatment and neuromodulation of the lower third muscles. Safety profiles varied among studies, with some reporting minimal adverse effects while others noted dose-related concerns. Conclusion: BoNT-A and HA dermal fillers offer a wide array of clinical applications in dentistry, ranging from therapeutic interventions to aesthetic enhancements. Despite promising efficacy, careful consideration and monitoring of safety outcomes are essential when integrating these interventions into clinical practice. Further research addressing methodological limitations and safety concerns is warranted to optimize their utilization and improve patient care in dentistry.

Craniofacial morphology in patients with impacted canine: a case control-study.

BACKGROUND: The objective of this study was to evaluate the risk of maxillary canine impaction through cephalometric evaluation. METHODS: One hundred and eighty-two Caucasian patients (80 males and 102 females) with a mean age of 12.4±0.5 were retrospectively enrolled in the present study. Ninety patients with impacted canines were compared with ninety-two patients with physiologically erupted canines. The following cephalometric variables were analyzed: SNA, ANB, SN-GOME, GO-ME, SP-CL, SELLA TURCICA DEPHT, A-Pt LINE, B-Pt LINE, A-Pt LINE°, B-Pt LINE°, A1s-Pt, A1i-Pt, A1s-Pt°, A1i-PT°, A-SN, B-SN and SN-U1. When applicable, a paired sample t-test was performed to investigate the difference in means between the two sample groups, while the Mann-Whitney Test was used as a non-parametric test in the case of a non-normal distribution of data. Statistical significance was set at P<0.05. RESULTS: The group with impacted canines showed an increase in Go-Me distance, SNA angle and A1s-Pt angle compared with the control group. In addition, the same group showed a decrease in A-SN and SP-Cl distance compared with the control group. CONCLUSIONS: An increase in mandibular length (GO-ME) and SNA angle associated with a reduction in A-Sn distance and interclinoid distance (SP-Cl) were observed in patients with impacted canines.

Evaluation of occlusal force in Class II subdivision malocclusion.

BACKGROUND: Class II subdivision is a malocclusion characterized by dental and functional asymmetry that is difficult to manage. Impaired muscle function can result in asymmetrical growth, leading to occlusal instability. OBJECTIVE(S): The study aimed to assess occlusal force in patients with Class II subdivision malocclusion using Innobyte. Additionally, the discrepancies of force generated at the position of maximum intercuspidation between the left and right sides of the arches were evaluated. METHODS: The occlusal force of 66 patients with Class II subdivision malocclusion (group S) was measured and compared with that of 66 patients with Class I (group I) and 66 patients with Class II malocclusion (group II). The S group patients had a Class I molar on the right side and a Class II molar on the left side. ANOVA test, followed by the Games-Howell post hoc test, was performed to compare the mean of the total force among the groups. To assess the difference in force between the right and left arches, one-way ANOVA test followed by Tukey's post hoc comparison was performed. Finally, a boxplot was created to show the trend of occlusal force recorded in the three groups of patients. RESULTS: The occlusal force differed significantly among the groups (p < .001). Post hoc Games-Howell analysis showed significant differences as follows: the total force in group S was 165.24 N greater than in group II and in group I was 218.06 N greater than in group II. The difference (right-left) in total force between the groups was statistically significant (p < .001). Tukey's post hoc test showed following significant correlation: in group S was 53.51 N greater than in group II and 63.12 N greater than in group I. CONCLUSIONS: Among the analysed groups, patients with Class II malocclusion exhibited the lowest value of occlusal force. In patients with Class II subdivision malocclusion, force asymmetry, characterised by a higher value on the Class I side and a lower value on the Class II side was observed.

Skeletal and dental effects of function-generating bite appliance compared to rapid palatal expander and untreated controls.

INTRODUCTION: Maxillary expansion is a fundamental interceptive orthodontic treatment, which can be achieved through either a rapid expansion protocol or functional devices. However, no data exist about the efficacy of functional devices in achieving skeletal expansion. Therefore, the aim of this study was to compare the effects of the rapid palatal expander (RPE) and the function-generating bite type M (FGB-M) on the transversal dimension of the maxilla, and on the maxillary and mandibular dental arch width. METHODS: One hundred eighty-one skeletal Class I patients, aged between 6 and 12 years and with a cervical vertebral maturation stage II or III, with maxillary transversal deficiency were retrospectively enrolled; among these 55 were treated with FGB-M, 73 were treated with RPE and 51 were untreated subjects retrieved from historical databases. The pre-treatment (T0) and post-treatment (T1) frontal cephalograms were retrieved, and the maxillary and mandibular widths, and the distance between upper and lower first molars were measured. T1-T0 interval was of 17.3 months (RPE), 24.6 months (FGB-M) and 18.2 months (controls). RESULTS: The statistical analysis showed that there were no statistically significant differences between the RPE and FGB-M groups regarding skeletal and dental expansion, while the untreated control group differed significantly from the other two groups. CONCLUSION: The comparison between patients treated with RPE and FGB-M showed that there were no statistically significant differences between the RPE and FGB-M groups regarding the amount of skeletal expansion and dental arch width, suggesting that both appliances can be used to achieve similar results.

Curve of Spee modification in different vertical skeletal patterns after clear aligner therapy: a 3D set-up retrospective study.

OBJECTIVE: The purpose of the present study was to evaluate: (1) changes in the curve of Spee (COS) after clear aligner therapy and (2) whether such changes correlated with the patient's skeletal patterns. MATERIALS AND METHODS: Three-dimensional mandibular models of 106 patients (47 males and 59 females; mean age 22.3 SD ± 3.4 years) treated with clear aligners were retrospectively analysed. The perpendicular distance between the occlusal reference plane and the buccal cusp tip of each lateral tooth was measured. Five angular cephalometric measurements (PP-MP, PP-OP, OP-MP, AFH, and PFH) were performed and correlated with the T1-T0 difference in linear distances. The patients were divided into three groups according to facial divergence. Variance analysis with Tukey post hoc correction was performed to evaluate the differences among groups. RESULTS: The one-way ANOVA test showed a statistically significant difference for all analysed variables, except for the change in the distance of the second molar from the occlusal reference plane. Tukey's HSD test showed the following differences: In normodivergents, the T1-T0 difference in the distance of the first molar from the occlusal plane was 1 mm greater than that observed in the hyperdivergent group (p < 0.05); in the normodivergent group, the T1-T0 difference in the distance of the second premolar from the occlusal plane was 1.23 mm greater than that observed in the hyperdivergent group (p < 0.05), while in the hypodivergent group, it was 1.08 mm greater than in the hyperdivergent group (p < 0.05); finally, in normodivergents, the T1-T0 difference in the distance of the first premolar from the occlusal plane was 0.97 mm greater than that observed in the hyperdivergent group (p < 0.05). CONCLUSION: Treatment with aligners did not lead to a clinically significant change in COS depth. However, when dividing the sample into groups based on craniofacial divergence, COS depth change differed significantly between the three groups.

The Correlation between Mandibular Arch Shape and Vertical Skeletal Pattern.

Background and Objectives: The aim of this study was to evaluate the correlation between the mandibular arch shape and the vertical skeletal pattern in growing patients. Materials and Methods: A total of 73 Caucasian patients (33 males and 40 females; mean age 9.4) were retrospectively enrolled from a pool of patients treated in chronological order at the Department of Orthodontics, University of Foggia, Italy, from April 2018 to December 2021. Each patient received a laterolateral radiograph and a digital scan of the dental arch. Eight cephalometric parameters (lower gonial angle, intermaxillary angle, divergence angle, Wits index, Jarabak ratio, OP-MP angle, PP-OP angle, and ANB) and five dental measurements (posterior mandibular arch width, anterior mandibular arch width, mandibular occlusal angle, posterior width on distobuccal molar cusps, and molar angle) were analyzed and then compared. A Spearman's rho correlation test between the cephalometric measurements and the dental measurements was performed. Statistical significance was set at p < 0.05. Results: A negative statistically significant correlation was found between the Jarabak ratio and the intermolar angle; a statistically significant correlation was also observed between the Wits index, the posterior mandibular width, and the occlusal mandibular angle; the ANB angle and the occlusal mandibular angle; the intermaxillary angle (PP-PM) and the mandibular occlusal angle, posterior mandibular width on the disto-vestibular cusp, and the intermolar angle; and the OP-MP angle and mandibular occlusal angle and the posterior mandibular width on the disto-vestibular cusp. Conclusions: The mandibular arch form may be related to certain predisposing features in craniofacial morphology, such as jaw divergence, the Jarabak ratio, and the intermaxillary angle.

Treatment of Mandibular Impacted Canine in a Patient with Class II Division 1 Malocclusion with "Reverse Pin": A Case Report.

This case report presents an orthodontic treatment conducted on a 13-year-old girl with bilateral Class II malocclusion and a mandibular impacted canine. The presence of an impacted tooth necessitates careful consideration of the timing of orthodontic treatment, the appropriate surgical procedure to expose the tooth, the specific orthodontic mechanics involved, and the potential problems that may arise, all of which depend on the type and location of the canine impaction in the jaw. The treatment plan included a surgical procedure to expose the impacted tooth and orthodontic traction to guide it into position. Correction of the Class II Division 1 malocclusion utilized a specialized technique called the "reverse pin", reducing vertical side effects. The revised version maintains clarity and key information about the case report and treatment.

Craniofacial morphology in Obstructive Sleep Apnea patients.

Background: To evaluate the correlation between cephalometric skeletal parameters and Obstructive Sleep Apnea syndrome (OSAs) severity, in adult patients with OSAs. Material and Methods: One hundred patients (94 males,6 females mean age 59,3) with diagnosis of OSAs were retrospectively enrolled. Each patient received Home Sleep Apnea Testing (HSAT) and latero-lateral radiograph. Eight cephalometric parameters (cranial deflection angle, saddle angle, articular angle, divergence angle, cranial base angle, skull base length, mandibular length, maxilla length) were analyzed and then related to Apnea/Hypopnea Index (AHI) and to the Oxygen Desaturation Index (ODI), recorded by HSAT. A Spearman's rho correlation test between cephalometric measurements and HSAT indices was performed. Statistical significance was set at p< 0.05. Results: A negative statistically significant correlation was found between mandibular length (Condilion-Gnathion distance) and AHI (rho= -0,2022; p<0,05) and between maxilla length (Ans-Pns) and AHI (rho= -0,2984; p<0,01) and ODI (rho= -0,2443; p<0,05). A statistically significant correlation was also observed between the divergence angle (S-N^Go-Me) and AHI (rho=0,2263; p<0,05) and between cranial deflection angle (Fh^NBa) and AHI (rho=0,2212; p<0,05) and ODI (rho=0,1970; p<0,05). Conclusions: The OSAs severity may be related to certain predisposing features in craniofacial morphology, such as maxillary and mandibular length, divergence and cranial deflection. Key words:OSAs, Home Sleep Apnea Testing, AHI, ODI, Cephalometry, Airway.