Guiding uniform Zn deposition with a multifunctional additive for highly utilized Zn anodes.

The practical applications of aqueous zinc-ion batteries (AZIBs) have been restricted by the fast growth of Zn dendrites and severe side reactions at the Zn/electrolyte interface. Herein, a multifunctional additive, L-leucine (Leu), is incorporated into a mild acidic electrolyte to stabilize the Zn anode. The Leu molecule, featuring both carboxyl and amino groups, exhibits strong interactions with Zn2+, which can reshape the solvation structure of Zn2+ and facilitate the uniform electrodeposition of Zn. Simultaneously, the Leu molecule exhibits preferential adsorption onto the Zn surface, effectively isolating it from direct contact with water, thus suppressing unwanted side reactions. Consequently, the Zn∥Cu asymmetric cell exhibits a high and stable coulombic efficiency of 99.5% at a current density of 5 mA cm-2 for 1100 h. Importantly, the capacity retention of the Zn∥NH4V4O10 full cell based on the Leu electrolyte reaches 80% after 1200 cycles at a current density of 2 A g-1. The successful application of the low-cost Leu effectively enhances the cycling stability of the AZIBs and accelerates their applications.

Ether-Based Gel Polymer Electrolyte for High-Voltage Potassium Ion Batteries.

Low-concentration ether electrolytes cannot efficiently achieve oxidation resistance and excellent interface behavior, resulting in severe electrolyte decomposition at a high voltage and ineffective electrode-electrolyte interphase. Herein, we utilize sandwich structure-like gel polymer electrolyte (GPE) to enhance the high voltage stability of potassium-ion batteries (PIBs). The GPE contact layer facilitates stable electrode-electrolyte interphase formation, and the GPE transport layer maintains good ionic transport, which enabled GPE to exhibit a wide electrochemical window and excellent electrochemical performance. In addition, Al corrosion under a high voltage is suppressed through the restriction of solvent molecules. Consequently, when using the designed GPE (based on 1 m), the K||graphite cell exhibits excellent cycling stability of 450 cycles with a capacity retention of 91%, and the K||FeFe-Prussian blue cell (2-4.2 V) delivers a high average Coulombic efficiency of 99.9% over 2200 cycles at 100 mA g-1. This study provides a promising path in the application of ether-based electrolytes in high-voltage and long-lasting PIBs.

Biomass-Derived Materials for Advanced Rechargeable Batteries.

Biomass-derived materials generally exhibit uniform and highly-stable hierarchical porous structures that can hardly be achieved by conventional chemical synthesis and artificial design. When used as electrodes for rechargeable batteries, these structural and compositional advantages often endow the batteries with superior electrochemical performances. This review systematically introduces the innate merits of biomass-derived materials and their applications as the electrode for advanced rechargeable batteries, including lithium-ion batteries, sodium-ion batteries, potassium-ion batteries, and metal-sulfur batteries. In addition, biomass-derived materials as catalyst supports for metal-air batteries, fuel cells, and redox-flow batteries are also included. The major challenges for specific batteries and the strategies for utilizing biomass-derived materials are detailly introduced. Finally, the future development of biomass-derived materials for advanced rechargeable batteries is prospected. This review aims to promote the development of biomass-derived materials in the field of energy storage and provides effective suggestions for building advanced rechargeable batteries.

An ionically cross-linked composite hydrogel electrolyte based on natural biomacromolecules for sustainable zinc-ion batteries.

Zinc-ion batteries (ZIBs) are regarded as promising power sources for flexible and biocompatible devices due to their good sustainability and high intrinsic safety. However, their applications have been hindered by the issues of uncontrolled Zn dendrite growth and severe water-induced side reactions in conventional liquid electrolytes. Herein, an ionically cross-linked composite hydrogel electrolyte based on natural biomacromolecules, including iota-carrageenan and sodium alginate, is designed to promote highly efficient and reversible Zn plating/stripping. The abundant functional groups of macromolecules effectively suppress the reactivity of water molecules and facilitate uniform Zn deposition. Moreover, the composite hydrogel electrolyte exhibits a high ionic conductivity of 5.89 × 10-2 S cm-1 and a Zn2+ transference number of 0.58. Consequently, the Zn‖Zn symmetric cell with the composite hydrogel electrolyte shows a stable cycle life of more than 500 h. Meanwhile, the Zn‖NH4V4O10 coin cell with the composite hydrogel electrolyte retains a high specific capacity of approximately 200 mA h g-1 after 600 cycles at 2 A g-1. The Zn‖NVO pouch cell based on the composite hydrogel electrolyte also shows a high specific capacity of 246.1 mA h g-1 at 0.5 A g-1 and retains 70.7% of its initial capacity after 150 cycles. The pouch cell performs well at different bending angles and exhibits a capacity retention rate of 98% after returning to its initial state from 180° folding. This work aims to construct high-performance hydrogel electrolytes using low-cost natural materials, which may provide a solution for the application of ZIBs in flexible biocompatible devices.

Coordination engineering for iron-based hexacyanoferrate as a high-stability cathode for sodium-ion batteries.

Iron-based hexacyanoferrate (Fe-HCF) are promising cathode materials for sodium-ion batteries (SIBs) due to their unique open-channel structure that facilitates fast ion transport and framework stability. However, practical implementation of SIBs has been hindered by low initial Coulombic efficiency (ICE), poor rate performance, and short lifespan. Herein, we report a coordination engineering to synthesize sodium-rich Fe-HCF as cathodes for SIBs through a uniquely designed 10-kg-scale chemical reactor. Our study systematically investigated the relationship between coordination surroundings and the electrochemical behavior. Building on this understanding, the cathode delivered a reversible capacity of 99.3 mAh g-1 at 5 C (1 C = 100 mA g-1), exceptional rate capability (51 mAh g-1 even at 100 C), long lifespan (over 15,000 times at 50 C), and a high ICE of 92.7%. A full cell comprising the Fe-HCF cathode and hard carbon (HC) anode exhibited an impressive cyclic stability with a high-capacity retention rate of 98.3% over 1,000 cycles. Meanwhile, this material can be readily scaled to the practical levels of yield. The findings underscore the potential of Fe-HCF as cathodes for SIBs and highlight the significance of controlling nucleation and morphology through coordination engineering for a sustainable energy storage system.

Spontaneous grain refinement effect of rare earth zinc alloy anodes enables stable zinc batteries.

Irreversible interfacial reactions at the anodes pose a significant challenge to the long-term stability and lifespan of zinc (Zn) metal batteries, impeding their practical application as energy storage devices. The plating and stripping behavior of Zn ions on polycrystalline surfaces is inherently influenced by the microscopic structure of Zn anodes, a comprehensive understanding of which is crucial but often overlooked. Herein, commercial Zn foils were remodeled through the incorporation of cerium (Ce) elements via the 'pinning effect' during the electrodeposition process. By leveraging the electron-donating effect of Ce atoms segregated at grain boundaries (GBs), the electronic configuration of Zn is restructured to increase active sites for Zn nucleation. This facilitates continuous nucleation throughout the growth stage, leading to a high-rate instantaneous-progressive composite nucleation model that achieves a spatially uniform distribution of Zn nuclei and induces spontaneous grain refinement. Moreover, the incorporation of Ce elements elevates the site energy of GBs, mitigating detrimental parasitic reactions by enhancing the GB stability. Consequently, the remodeled ZnCe electrode exhibits highly reversible Zn plating/stripping with an accumulated capacity of up to 4.0 Ah cm-2 in a Zn symmetric cell over 4000 h without short-circuit behavior. Notably, a ∼0.4 Ah Zn||NH4V4O10 pouch cell runs over 110 cycles with 83% capacity retention with the high-areal-loading cathode (≈20 mg cm-2). This refining-grains strategy offers new insights into designing dendrite-free metal anodes in rechargeable batteries.

Interfacial Biomacromolecular Engineering Toward Stable Ah-Level Aqueous Zinc Batteries.

Interfacial instability within aqueous zinc batteries (AZBs) spurs technical obstacles including parasitic side reactions and dendrite failure to reach the practical application standards. Here, an interfacial engineering is showcased by employing a bio- derived zincophilic macromolecule as the electrolyte additive (0.037 wt%), which features a long-chain configuration with laterally distributed hydroxyl and sulfate anion groups, and has the propensity to remodel the electric double layer of Zn anodes. Tailored Zn2+-rich compact layer is the result of their adaptive adsorption that effectively homogenizes the interfacial concentration field, while enabling a hybrid nucleation and growth mode characterized as nuclei-rich and space-confined dense plating. Further resonated with curbed corrosion and by-products, a dendrite-free deposition morphology is achieved. Consequently, the macromolecule-modified zinc anode delivers over 1250 times of reversible plating/stripping at a practical area capacity of 5 mAh cm-2, as well as a high zinc utilization rate of 85%. The Zn//NH4V4O10 pouch cell with the maximum capacity of 1.02 Ah can be steadily operated at 71.4 mA g-1 (0.25 C) with 98.7% capacity retained after 50 cycles, which demonstrates the scale-up capability and highlights a "low input and high return" interfacial strategy toward practical AZBs.

Restructuring Electrolyte Solvation by a Partially and Weakly Solvating Cosolvent toward High-Performance Potassium-Ion Batteries.

Ether-based electrolytes are among the most important electrolytes for potassium-ion batteries (PIBs) due to their low polarization voltage and notable compatibility with potassium metal. However, their development is hindered by the strong binding between K+ and ether solvents, leading to [K+-solvent] cointercalation on graphite anodes. Herein, we propose a partially and weakly solvating electrolyte (PWSE) wherein the local solvation environment of the conventional 1,2-dimethoxyethane (DME)-based electrolyte is efficiently reconfigured by a partially and weakly solvating diethoxy methane (DEM) cosolvent. For the PWSE in particular, DEM partially participates in the solvation shell and weakens the chelation between K+ and DME, facilitating desolvation and suppressing cointercalation behavior. Notably, the solvation structure of the DME-based electrolyte is transformed into a more cation-anion-cluster-dominated structure, consequently promoting thin and stable solid-electrolyte interphase (SEI) generation. Benefiting from optimized solvation and SEI generation, the PWSE enables a graphite electrode with reversible K+ (de)intercalation (for over 1000 cycles) and K with reversible plating/stripping (the K||Cu cell with an average Coulombic efficiency of 98.72% over 400 cycles) and dendrite-free properties (the K||K cell operates over 1800 h). We demonstrate that rational PWSE design provides an approach to tailoring electrolytes toward stable PIBs.

Rational Regulation of High-Voltage Stability in Potassium Layered Oxide Cathodes.

Layered oxide cathode materials may undergo irreversible oxygen loss and severe phase transitions during high voltage cycling and may be susceptible to transition metal dissolution, adversely affecting their electrochemical performance. Here, to address these challenges, we propose synergistic doping of nonmetallic elements and in situ electrochemical diffusion as potential solution strategies. Among them, the distribution of the nonmetallic element fluorine within the material can be regulated by doping boron, thereby suppressing manganese dissolution through surface enrichment of fluorine. Furthermore, in situ electrochemical diffusion of fluorine from the surface into the bulk of the materials after charging reduces the energy barrier of potassium ion diffusion while effectively inhibiting irreversible oxygen loss under high voltage. The modified K0.5Mn0.83Mg0.1Ti0.05B0.02F0.1O1.9 layered oxide cathode exhibits a high capacity of 147 mAh g-1 at 50 mA g-1 and a long cycle life of 2200 cycles at 500 mA g-1. This work demonstrates the efficacy of synergistic doping and in situ electrochemical diffusion of nonmetallic elements and provides valuable insights for optimizing rechargeable battery materials.

Nonflammable Phosphate-Based Electrolyte for Safe and Stable Potassium Batteries Enabled by Optimized Solvation Effect.

Current potassium-ion batteries (PIBs) are limited in safety and lifetime owing to the lack of suitable electrolyte solutions. To address these issues, herein, we report an innovative non-flammable electrolyte design strategy that leverages an optimal moderate solvation phosphate-based solvent which strikes a balance between solvation capability and salt dissociation ability, leading to superior electrochemical performance. The formulated electrolyte simultaneously exhibits the advantages of low salt concentration (only 0.6 M), low viscosity, high ionic conductivity, high oxidative stability, and safety. Our electrolyte also promotes the formation of self-limiting inorganic-rich interphases at the anode surface, alongside robust cathode-electrolyte interphase on iron-based Prussian blue analogues, mitigating electrode/electrolyte side reactions and preventing Fe dissolution. Notably, the PIBs employing our electrolyte exhibit exceptional durability, with 80 % capacity retention after 2,000 cycles at high-voltage of 4.2 V in a coin cell. Impressively, in a larger scale pouch cell, it maintains over 81 % of its initial capacity after 1,400 cycles at 1 C-rate with high average Coulombic efficiency of 99.6 %. This work represents a significant advancement toward the realization of safe, sustainable, and high-performance PIBs.

Insoluble low-impedance organic battery cathode enabled by graphite grafting towards potassium storage.

Organic electrode materials are extensively applied for potassium storage as their sustainability and low cost. However, the organic electrodes' (i) solubility (such as naphthalene-1,4,5,8-tetracarboxylic dianhydride, NTCDA; 2,6-diaminoanthanthraquinone, DAQ, which are easily soluble in organic solvents) and (ii) intrinsic poor conductivity often result in high impedance and inferior electrochemical performance. Herein, the monomers of NTCDA and DAQ were polymerized (PND) to obtain an insoluble organic cathode, and a 5 wt% graphite (G) was also used to graft the PND sheet and increase its conductivity. Consequently, the as-prepared organic cathode (PND-G) achieved a long-life cycling performance of over 1500 cycles at 100 mA g-1. This work may provide guidelines for designing and developing insoluble and high conductive organic electrode materials.

Chloro-Functionalized Ether-Based Electrolyte for High-Voltage and Stable Potassium-Ion Batteries.

Ether-based electrolyte is beneficial to obtaining good low-temperature performance and high ionic conductivity in potassium ion batteries. However, the dilute ether-based electrolytes usually result in ion-solvent co-intercalation of graphite, poor cycling stability, and hard to withstand high voltage cathodes above 4.0 V. To address the aforementioned issues, an electron-withdrawing group (chloro-substitution) was introduced to regulate the solid-electrolyte interphase (SEI) and enhance the oxidative stability of ether-based electrolytes. The dilute (~0.91 M) chloro-functionalized ether-based electrolyte not only facilitates the formation of homogeneous dual halides-based SEI, but also effectively suppress aluminum corrosion at high voltage. Using this functionalized electrolyte, the K||graphite cell exhibits a stability of 700 cycles, the K||Prussian blue (PB) cell (4.3 V) delivers a stability of 500 cycles, and the PB||graphite full-cell reveals a long stability of 6000 cycles with a high average Coulombic efficiency of 99.98 %. Additionally, the PB||graphite full-cell can operate under a wide temperature range from -5 °C to 45 °C. This work highlights the positive impact of electrolyte functionalization on the electrochemical performance, providing a bright future of ether-based electrolytes application for long-lasting, wide-temperature, and high Coulombic efficiency PIBs and beyond.

Sustainable Electrolytes: Design Principles and Recent Advances.

Today, rechargeable batteries are omnipresent and essential for our existence. In order to improve the electrochemical performance of electric fields, the introduction of electrolytes with fluorine (F)-based inorganic elemental compositions is a direction of exploration. However, most fluorocarbons have a high global warming potential and ozone depletion potential, which do not meet the sustainability requirements of the battery industry. Therefore, developing sustainable electrolytes is a viable option for future battery development. Although researchers have made much progress in electrolyte optimization, little attention has been paid to developing low-toxic and safe electrolytes. This review aims to elucidate the design principles and recent advances in this direction for solvents and salts. It concludes with a summary and outlook on future research directions for the molecular design of green electrolytes for practical high-voltage rechargeable batteries.

Single [0001]-oriented zinc metal anode enables sustainable zinc batteries.

The optimization of crystalline orientation of a Zn metal substrate to expose more Zn(0002) planes has been recognized as an effective strategy in pursuit of highly reversible Zn metal anodes. However, the lattice mismatch between substrate and overgrowth crystals has hampered the epitaxial sustainability of Zn metal. Herein, we discover that the presence of crystal grains deviating from [0001] orientation within a Zn(0002) metal anode leads to the failure of epitaxial mechanism. The electrodeposited [0001]-uniaxial oriented Zn metal anodes with a single (0002) texture fundamentally eliminate the lattice mismatch and achieve ultra-sustainable homoepitaxial growth. Using high-angle angular dark-filed scanning transmission electron microscopy, we elucidate the homoepitaxial growth of the deposited Zn following the "~ABABAB~" arrangement on the Zn(0002) metal from an atomic-level perspective. Such consistently epitaxial behavior of Zn metal retards dendrite formation and enables improved cycling, even in Zn||NH4V4O10 pouch cells, with a high capacity of 220 mAh g-1 for over 450 cycles. The insights gained from this work on the [0001]-oriented Zn metal anode and its persistently homoepitaxial mechanism pave the way for other metal electrodes with high reversibility.

Bio-inspired carbon electrodes for metal-ion batteries.

Carbon has been widely used as an electrode material in commercial metal-ion batteries (MIBs) because of its desirable electrical, mechanical, and physical properties. Still, traditional carbon electrodes suffer from limited mechanical stability and electrochemical performance in MIBs. Drawing inspiration from biological species, the carbon allotropes, such as fullerenes, carbon nanotubes, and graphene, can be engineered into mechanically robust, highly conductive frameworks with enhanced ion storage and transport capabilities for MIBs. Here, we present an assortment of bio-inspired carbon electrodes that have enhanced the cycling stability, capacity retention, and overall performance of MIBs. In addition, mimicking the structure and functionality of biological systems has led to the development of flexible MIBs whose performance does not degrade even when stretched, bent, or twisted. Finite element analysis (FEA) is a useful guide in identifying such bio-inspired carbon frameworks because it can simulate and analyze potential failure scenarios, such as stress build-up or structural collapse in MIBs. This review highlights through several examples that there is much scope for improving carbon-based electrode materials through bio-inspired designs for practical high-performance MIBs.

Molecular modulation strategies for two-dimensional transition metal dichalcogenide-based high-performance electrodes for metal-ion batteries.

In the past few decades, great efforts have been made to develop advanced transition metal dichalcogenide (TMD) materials as metal-ion battery electrodes. However, due to existing conversion reactions, they still suffer from structural aggregation and restacking, unsatisfactory cycling reversibility, and limited ion storage dynamics during electrochemical cycling. To address these issues, extensive research has focused on molecular modulation strategies to optimize the physical and chemical properties of TMDs, including phase engineering, defect engineering, interlayer spacing expansion, heteroatom doping, alloy engineering, and bond modulation. A timely summary of these strategies can help deepen the understanding of their basic mechanisms and serve as a reference for future research. This review provides a comprehensive summary of recent advances in molecular modulation strategies for TMDs. A series of challenges and opportunities in the research field are also outlined. The basic mechanisms of different modulation strategies and their specific influences on the electrochemical performance of TMDs are highlighted.

Separator designs for aqueous zinc-ion batteries.

Aqueous zinc-ion batteries (AZIBs) are attracting worldwide attention due to their multiple merits such as extreme safety, low cost, feasible assembly, and environmentally friendly enabled by water-based electrolytes. At present, AZIBs have experienced systematic advances in battery components including cathode, anode, and electrolyte, whereas research involving separators is insufficient. The separator is the crucial component of AZIBs through providing ion transport, forming contact with electrodes, serving as a container for electrolyte, and ensuring the efficient battery operation. Considering this great yet ignored significance, it is timely to present the latest advances in design strategies, the systematic classification and summary of separators. We summarize the separator optimization strategies mainly along two approaches including the modification of the frequently used glass fiber and the exploitation of new separators. The advantages and disadvantages of the two strategies are analyzed from the material types and the characteristics of different strategies. The effects and mechanisms of various materials on regulating the uniform migration and deposition of Zn2+, balancing the excessively concentrated nucleation points, inhibiting the growth of dendrites, and the occurrence of side reactions were discussed using confinement, electric field regulation, ion interaction force, desolvation, etc. Finally, potential directions for further improvement and development of AZIBs separators are proposed, aiming at providing helpful guidance for this booming field.

Covalent Organic Framework with 3D Ordered Channel and Multi-Functional Groups Endows Zn Anode with Superior Stability.

Achieving a highly robust zinc (Zn) metal anode is extremely important for improving the performance of aqueous Zn-ion batteries (AZIBs) for advancing "carbon neutrality" society, which is hampered by the uncontrollable growth of Zn dendrite and severe side reactions including hydrogen evolution reaction, corrosion, and passivation, etc. Herein, an interlayer containing fluorinated zincophilic covalent organic framework with sulfonic acid groups (COF-S-F) is developed on Zn metal (Zn@COF-S-F) as the artificial solid electrolyte interface (SEI). Sulfonic acid group (- SO3H) in COF-S-F can effectively ameliorate the desolvation process of hydrated Zn ions, and the three-dimensional channel with fluoride group (-F) can provide interconnected channels for the favorable transport of Zn ions with ion-confinement effects, endowing Zn@COF-S-F with dendrite-free morphology and suppressed side reactions. Consequently, Zn@COF-S-F symmetric cell can stably cycle for 1,000 h with low average hysteresis voltage (50.5 mV) at the current density of 1.5 mA cm-2. Zn@COF-S-F|MnO2 cell delivers the discharge specific capacity of 206.8 mAh g-1 at the current density of 1.2 A g-1 after 800 cycles with high-capacity retention (87.9%). Enlightening, building artificial SEI on metallic Zn surface with targeted design has been proved as the effective strategy to foster the practical application of high-performance AZIBs.

Validating Operating Stability and Biocompatibility Toward Safer Zinc-Based Batteries.

Wearable and implantable electronics are standing at the frontiers of science and technology, driven by the increasing demands from modernized lifestyles. Zinc-based batteries (ZBs) are regarded as ideal energy suppliers for these biocompatible electronics, but the corresponding biocompatibility validation is still in the initial stage. Meanwhile, complicated working conditions and some extreme electrolyte environments raise strict challenges, leaving less choices for safe ZBs. Toward higher operating stability and biocompatibility, this work proposes a hydrogel electrolyte featuring the moisture maintaining ability and a robust interface, which could further provide a milder environment for Zn-MnO2 batteries and Zn-air batteries. The cytotoxicity and tissue injury of batteries are evaluated with human cell lines and battery implantations on the animal models, which demonstrate the high biocompatibility of ZBs, while preliminary wearable devices implementation further verifies their operating stability. This work may provide a pathway for developing and validating biocompatible ZBs, contributing to their future practical employment in relevant fields.

Building Stable Solid-State Potassium Metal Batteries.

Solid-state potassium metal batteries (SPMBs) are promising candidates for the next generation of energy storage systems for their low cost, safety, and high energy density. However, full SPMBs are not yet reported due to the K dendrites, interfacial incompatibility, and limited availability of suitable solid-state electrolytes. Here, stable SPMBs using a new iodinated solid polymer electrolyte (ISPE) are presented. The functional ions reconstruct ion transport channels, providing efficient potassium ion transport. ISPE shows a combination of high ionic conductivity, superior interfacial compatibility, and electrochemical stability. In situ alloying and iodinated interlayer increase K metal compatibility for prolonged cycling with low polarization. Moreover, the ISPE enables SPMBs with Prussian blue cathode stable operation at a high voltage of 4.5 V, a superior rate capability, and long-term cycling over 3000 cycles (4.2 V vs K+/K) with an ultra-high coulombic efficiency of 99.94%. More importantly, a classic solid-state potassium metal pouch cell achieves 4.2 V stable cycling over 800 cycles with a high retention of 93.6%, presenting a new development strategy for secure and high-performance rechargeable solid-state potassium metal batteries.