Large-Area Near-Infrared Emission Enhancement on Single Upconversion Nanoparticles by Metal Nanohole Array.

Single lanthanide (Ln) ion doped upconversion nanoparticles (UCNPs) exhibit great potential for biomolecule sensing and counting. Plasmonic structures can improve the emission efficiency of single UCNPs by modulating the energy transferring process. Yet, achieving robust and large-area single UCNP emission modulation remains a challenge, which obstructs investigation and application of single UCNPs. Here, we present a strategy using metal nanohole arrays (NHAs) to achieve energy-transfer modulation on single UCNPs simultaneously within large-area plasmonic structures. By coupling surface plasmon polaritons (SPPs) with higher-intermediate state (1D2 → 3F3, 1D2 → 3H4) transitions, we achieved a remarkable up to 10-fold enhancement in 800 nm emission, surpassing the conventional approach of coupling SPPs with an intermediate ground state (3H4 → 3H6). We numerically simulate the electrical field distribution and reveal that luminescent enhancement is robust and insensitive to the exact location of particles. It is anticipated that the strategy provides a platform for widely exploring applications in single-particle quantitative biosensing.

Electronic Flat Band in Distorted Colouring Triangle Lattice.

Dispersionless flat bands (FBs) in momentum space, given rise to electron destructive interference in frustrated lattices, offer opportunities to enhance electronic correlations and host exotic many-body phenomena, such as Wigner crystal, fractional quantum hall state, and superconductivity. Despite successes in theory, great challenges remain in experimentally realizing FBs in frustrated lattices due to thermodynamically structural instability. Here, the observation of electronic FB in a potassium distorted colouring triangle (DCT) lattice is reported, which is supported on a blue phosphorene-gold network. It is verified that the interaction between potassium and the underlayer dominates and stabilizes the frustrated structures. Two-dimensional electron gas is modulated by the DCT lattice, and in turn results in a FB dispersion due to destructive quantum interferences. The FB exhibits suppressed bandwidth with high density of states, which is directly observed by scanning tunneling microscopy and confirmed by the first-principles calculation. This work demonstrates that DCT lattice is a promising platform to study FB physics and explore exotic phenomena of correlation and topological matters.

Strain Dependence of Energetics and Kinetics of Vacancy in Tungsten.

We investigate the influence of hydrostatic/biaxial strain on the formation, migration, and clustering of vacancy in tungsten (W) using a first-principles method, and show that the vacancy behaviors are strongly dependent on the strain. Both a monovacancy formation energy and a divacancy binding energy decrease with the increasing of compressive hydrostatic/biaxial strain, but increase with the increasing of tensile strain. Specifically, the binding energy of divacancy changes from negative to positive when the hydrostatic (biaxial) tensile strain is larger than 1.5% (2%). These results indicate that the compressive strain will facilitate the formation of monovacancy in W, while the tensile strain will enhance the attraction between vacancies. This can be attributed to the redistribution of electronic states of W atoms surrounding vacancy. Furthermore, although the migration energy of the monovacancy also exhibits a monotonic linear dependence on the hydrostatic strain, it shows a parabola with an opening down under the biaxial strain. Namely, the vacancy mobility will always be promoted by biaxial strain in W, almost independent of the sign of strain. Such unexpected anisotropic strain-enhanced vacancy mobility originates from the Poisson effect. On the basis of the first-principles results, the nucleation of vacancy clusters in strained W is further determined with the object kinetic Monte Carlo simulations. It is found that the formation time of tri-vacancy decrease significantly with the increasing of tensile strain, while the vacancy clusters are not observed in compressively strained W, indicating that the tensile strain can enhance the formation of voids. Our results provide a good reference for understanding the vacancy behaviors in W.

Twin and dislocation mechanisms in tensile W single crystal with temperature change: a molecular dynamics study.

Molecular dynamics simulations are performed to investigate the orientation and temperature dependence of tensile response in single crystal W. It is found that W single crystal exhibits distinct temperature-dependent deformation behaviors along different orientations. With increasing temperature, the yield strain in the [001] orientation increases, while those in [110] and [111] orientations first increase and then decrease. The tensile deformations along orientations close to [001] are found to be dominated by twinning; the nucleation and growth of twins are accomplished through the nucleation and glide of ⅙111 partial dislocations on {112} planes. In contrast, the deformations along orientations close to [110] and [111] are found to be dominated by the slip of ½111 full dislocations, which move in a stay-and-go fashion. Moreover, intermediate deformation behaviors, which may become unstable at high temperatures, are observed for some intervening orientations. The distinct deformation behaviors of W along different orientations are rationalized based on the twinning-antitwinning asymmetry of ⅙111 partial dislocations on {112} planes.

Embedded-atom method potential for modeling hydrogen and hydrogen-defect interaction in tungsten.

An embedded-atom method potential has been developed for modeling hydrogen in body-centered-cubic (bcc) tungsten by fitting to an extensive database of density functional theory (DFT) calculations. Comprehensive evaluations of the new potential are conducted by comparing various hydrogen properties with DFT calculations and available experimental data, as well as all the other tungsten-hydrogen potentials. The new potential accurately reproduces the point defect properties of hydrogen, the interaction among hydrogen atoms, the interplay between hydrogen and a monovacancy, and the thermal diffusion of hydrogen in tungsten. The successful validation of the new potential confirms its good reliability and transferability, which enables large-scale atomistic simulations of tungsten-hydrogen system. The new potential is afterward employed to investigate the interplay between hydrogen and other defects, including [1 1 1] self-interstitial atoms (SIAs) and vacancy clusters in tungsten. It is found that both the [1 1 1] SIAs and the vacancy clusters exhibit considerable attraction for hydrogen. Hydrogen solution and diffusion in strained tungsten are also studied using the present potential, which demonstrates that tensile (compressive) stress facilitates (impedes) hydrogen solution, and isotropic tensile (compressive) stress impedes (facilitates) hydrogen diffusion while anisotropic tensile (compressive) stress facilitates (impedes) hydrogen diffusion.

Energetics of vacancy segregation to [100] symmetric tilt grain boundaries in bcc tungsten.

The harsh irradiation environment poses serious threat to the structural integrity of leading candidate for plasma-facing materials, tungsten (W), in future nuclear fusion reactors. It is thus essential to understand the radiation-induced segregation of native defects and impurities to defect sinks, such as grain boundaries (GBs), by quantifying the segregation energetics. In this work, molecular statics simulations of a range of equilibrium and metastable [100] symmetric tilt GBs are carried out to explore the energetics of vacancy segregation. We show that the low-angle GBs have larger absorption length scales over their high-angle counterparts. Vacancy sites that are energetically unfavorable for segregation are found in all GBs. The magnitudes of minimum segregation energies for the equilibrium GBs vary from -2.61 eV to -0.76 eV depending on the GB character, while those for the metastable GB states tend to be much lower. The significance of vacancy delocalization in decreasing the vacancy segregation energies and facilitating GB migration has been discussed. Metrics such as GB energy and local stress are used to interpret the simulation results, and correlations between them have been established. This study contributes to the possible application of polycrystalline W under irradiation in advanced nuclear fusion reactors.

Energetic and kinetic dataset on interaction of the vacancy and self-interstitial atom with the grain boundary in α-iron.

We provide the dataset of the vacancy (interstitial) formation energy, segregation energy, diffusion barrier, vacancy-interstitial annihilation barrier near the grain boundary (GB) in bcc-iron and also the corresponding interactive range. The vacancy-interstitial annihilation mechanisms in the bulk, near the GB and at the GB at across scales were given.

Shear-coupled grain boundary migration assisted by unusual atomic shuffling.

Shear-coupled grain boundary (GB) migration can be an efficacious mechanism to accommodate plastic deformation when the grain size of polycrystalline materials goes small. Nevertheless, how this kind of GB motion comes into play at the atomic level has not been fully revealed. Here, we have investigated the shear-coupled migration (SCM) of typical [100] group symmetrical tilt GBs in bcc W using atomistic simulations. Depending on GB character, the SCM is found to proceed via dislocation slipping in the 〈100〉 or 〈110〉 mode with striking shear strength difference between them. We demonstrate that there exists an unusual atomic shuffling along the tilt axis, which greatly assists SCM to operate in the easier 〈110〉 mode instead of the 〈100〉 one. The present results highlight the significant role of GB character in the atomistic SCM process and contribute to the future design and fabrication of high-performance materials in GB engineering.

Interplay between intrinsic point defects and low-angle grain boundary in bcc tungsten: effects of local stress field.

We have used molecular statics in conjunction with an embedded atom method to explore the interplay between native point defects (vacancies and self-interstitials (SIAs)) and a low-angle grain boundary (GB) in bcc tungsten. The low-angle GB has biased absorption of SIAs over vacancies. We emphasize the significance of phenomena such as vacancy delocalization and SIA instant absorption around the GB dislocation cores in stabilizing the defect structures. Interstitial loading into the GB can dramatically enhance the interaction strength between the point defects and the GB due to SIA clustering (SIA cloud formation) or SIA vacancy recombination. We propose that the 'maximum atom displacement' can complement the 'vacancy formation energy' in evaluating unstable vacancy sites. Calculations of point defect migration barriers in the vicinity of GB dislocation cores show that vacancies and SIAs preferentially migrate along the pathways in the planes immediately above and below the core, respectively.

Critical concentration for hydrogen bubble formation in metals.

Employing a thermodynamic model with previously calculated first-principle energetics as inputs, we determined the hydrogen (H) concentration at the interstitial and monovacancy as well as its dependence on temperature and pressure in tungsten and molybdenum. Based on this, we predicted the critical H concentration for H bubble formation at different temperatures. The critical concentration, defined as the value when the concentration of H at a certain mH-vacancy complex first became equal to that of H at the interstitial, was 24 ppm/7.3 GPa and 410 ppm/4.7 GPa at 600 K in tungsten and molybdenum in the case of a monovacancy. Beyond the critical H concentration, numerous H atoms accumulated in the monovacancy, leading to the formation and rapid growth of H-vacancy complexes, which was considered the preliminary stage of H bubble formation. We expect that the proposed approach will be generally used to determine the critical H concentration for H bubble formation in metals.

Characterization of iron ferromagnetism by the local atomic volume: from three-dimensional structures to isolated atoms.

We present a comprehensive study of the relationship between the ferromagnetism and the structural properties of Fe systems from three-dimensional ones to isolated atoms based on the spin-density functional theory. We have found a relation between the magnetic moment and the volume of the Voronoi polyhedron, determining, in most cases, the value of the total magnetic moment as a function of this volume with an average accuracy of ±0.28 µ(B) and of the 3d magnetic moment with an average accuracy of ±0.07 µ(B) when the atomic volume is larger than 22 ų. It is demonstrated that this approach is applicable for many three-dimensional systems, including high-symmetry structures of perfect body-centered cubic (bcc), face-centered cubic (fcc), hexagonal close-packed (hcp), double hexagonal close-packed (dhcp), and simple cubic (sc) crystals, as well as for lower-symmetry ones, for example atoms near a grain boundary (GB) or a surface, around a vacancy or in a linear chain (for low-dimensional cases, we provide a generalized definition of the Voronoi polyhedron). Also, we extend the validity of the Stoner model to low-dimensional structures, such as atomic chains, free-standing monolayers and surfaces, determining the Stoner parameter for these systems. The ratio of the 3d-exchange splitting to the magnetic moment, corresponding to the Stoner parameter, is found to be I(3d) = (0.998 ± 0.006) eV /µ(B) for magnetic moments up to 3.0 µ(B). Further, the 3d exchange splitting changes nearly linearly in the region of higher magnetic moments (3.0-4.0 µ(B)) and the corresponding Stoner exchange parameter equals I(h)(3d) = (0.272 ± 0.006) eV /µ(B). The existence of these two regions reflects the fact that, with increasing Voronoi volume, the 3d bands separate first and, consequently, the 3d magnetic moment increases. When the Voronoi volume is sufficiently large (≥22 ų), the separation of the 3d bands is complete and the magnetic moment reaches a value of 3.0 µ(B). Then, when the volume further increases, the 4s bands start to separate, increasing thus the 4s magnetic moment. Surprisingly, in the region of higher magnetic moments (≥3.0 µ(B)), there is also a linear relationship between the 4s exchange splitting and the total magnetic moment with a slope of I(h)(4s) = (1.053 ± 0.016) eV /µ(B), which is nearly identical to I(3d) for magnetic moments up to 3.0 µB. These linear relations can be considered as an extension of the Stoner model for low-dimensional systems.

Structure and stability of He and He-vacancy clusters at a Σ5(310)/[001] grain boundary in bcc Fe from first-principles.

We have studied the atomic structure and energetic stability of helium (He) and He-vacancy clusters in an iron (Fe) Σ5(310)/[001] grain boundary (GB) using a first-principles method. The He and He-vacancy clusters in the Fe GB are shown to exhibit high-symmetry structures. The equilibrium He-He distance in the clusters is ~1.70 Å, much smaller than 2.80 Å in the vacuum or 2.94 Å in a face centred cubic (fcc) crystal, indicating the attractive interaction between the He atoms due to the presence of Fe. The charge density surrounding He is demonstrated to decrease with an increasing number of He atoms in the clusters, leading to a positive binding energy of a He atom to the clusters. This suggests He and He-vacancy clusters can energetically trap more He atoms, which is responsible for the growth of the He-related clusters (He and He-vacancy clusters) and thus the He bubbles in the GB. The binding energy of an interstitial He atom to the He-related clusters is found generally lower in the GB than in a bcc crystal. Besides, the binding strengths of small He clusters to the GB and to a vacancy in a bcc matrix are compared, and the latter shows greater trapping strength to an interstitial He and a He(2) cluster. The magnetism of the Fe atoms near the GB as well as its variation caused by the He-related clusters is also investigated. The local magnetic moment variation of the Fe atoms in the system is enhanced to a different extent, depending on the size of the He-related clusters.

Anisotropic strain enhanced hydrogen solubility in bcc metals: the independence on the sign of strain.

When an impurity is doped in a solid, it inevitably induces a local stress, tending to expand or contract the lattice. Consequently, strain can be applied to change the solubility of impurity in a solid. Generally, the solubility responds to strain "monotonically," increasing (decreasing) with the tensile (compressive) strain if the impurity induces a compressive stress or vice versa. Using first-principles calculations, however, we discovered that the H solubility can be enhanced by anisotropic strain in some bcc metals, almost independent of the sign of strain. This anomalous behavior is found to be caused by a continuous change of H location induced by anisotropic strain. Our finding suggests a cascading effect of H bubble formation in bcc metals: the H solution leads to H bubble formation that induces anisotropic strain that in turn enhances H solubility to further facilitate bubble growth.

Effects of O in a binary-phase TiAl-Ti3Al alloy: from site occupancy to interfacial energetics.

We have investigated site occupancy and interfacial energetics of a TiAl-Ti(3)Al binary-phase system with O using a first-principles method. Oxygen is shown to energetically occupy the Ti-rich octahedral interstitial site, because O prefers to bond with Ti rather than Al. The occupancy tendency of O in TiAl alloy from high to low is α(2)-Ti(3)Al to the γ-α(2) interface and γ-TiAl. We demonstrate that O can largely affect the mechanical properties of the TiAl-Ti(3)Al system. Oxygen at the TiAl-Ti(3)Al interface reduces both the cleavage energy and the interface energy, and thus weakens the interface strength but strongly stabilizes the TiAl/Ti(3)Al interface with the O(2) molecule as a reference. Consequently, the mechanical property variation of TiAl alloy due to the presence of O not only depends on the number of TiAl/Ti(3)Al interfaces but also is related to the O concentration in the alloy.

Dissolution, diffusion and permeation behavior of hydrogen in vanadium: a first-principles investigation.

Employing a first-principles method, we have studied the stability, diffusivity, and permeation properties of hydrogen (H) and its isotopes in bcc vanadium (V). A single H atom is found to favor the tetrahedral interstitial site (TIS) in V. The charge density distribution exhibits a strong interaction between H and its neighbor V atoms. Analysis of DOS and Bader charge reveals that the occupation number of H-induced low energy states is directly associated with the stability of H in V. Further, H is shown to diffuse between the neighboring TISs with a diffusion barrier of 0.07 eV. Diffusion coefficients and permeabilities of H isotopes in V are estimated with empirical theory. At a typical temperature of 800 K, the diffusion coefficient and the permeability of H are 2.48 × 10(-4) cm(2) s(-1) and 2.19 × 10(-9) mol m(-1) s(-1) Pa(- 1/2), respectively.

Energy investigation of effects of O on mechanical properties of NiAl intermetallics.

We have investigated effects of O on mechanical properties of NiAl by calculating the cleavage energy (γ(C)) and the unstable stacking fault energy (γ(us)) using a first-principles method. O is shown to reduce γ(C)/γ(us) for the [001](110) and [100](001) slip systems, indicating that the presence of O should be associated with the ductility reduction of NiAl. Further, γ(C)/γ(us) of the NiAl-O system can be increased by Cr, suggesting the possibility to suppress the negative effect of O via alloying elements.

First-principles study of He effects in a bcc Fe grain boundary: site preference, segregation and theoretical tensile strength.

We perform a first-principles calculation to investigate the effects of He in an Fe Σ5(310)/[001] grain boundary (GB) with the SIESTA code, for which the reliability of the pseudopotential and the basis set are systematically tested. We calculate the formation and segregation energies for different substitutional and interstitial cases in order to determine the site preference and the segregation properties of He in the Fe GB. It is demonstrated that the He segregation either breaks (substitution) or weakens (interstitial) the surrounding interfacial Fe-Fe bonds, leading to the GB tensile strength reduction.

Dissolution and diffusion properties of carbon in tungsten.

We have investigated the structure, solution and diffusion behavior of carbon (C) in tungsten (W) based on first-principles calculations. The single C atom is energetically favorable sitting at the octahedral interstitial site (OIS) with a solution energy of 0.78 eV in W. Double C atoms tend to be paired up at the two neighboring OISs along the (210) direction with a distance of ∼ 3.57 Å and a binding energy of + 0.50 eV. This suggests that a positive attractive interaction between C atoms exists, which might lead to a local higher concentration of C in W and form carbide. Kinetically, the C and vacancy diffusion co-efficients as a function of temperature have been determined, and are 1.32 × 10(-19) m(2) s(-1) and 3.11 × 10(-23) m(2) s(-1) at a typical temperature of 600 K, respectively.

Bonding characteristics in NiAl intermetallics with O impurity: a first-principles computational tensile test.

We have performed a first-principles computational tensile test on NiAl intermetallics with O impurity along the [001] crystalline direction on the (110) plane to investigate the tensile strength and the bonding characteristics of the NiAl-O system. We show that the ideal tensile strength is largely reduced due to the presence of O impurity in comparison with pure NiAl. The investigations of the atomic configuration and bond-length evolution show that O prefers to bond with Al, forming an O-Al cluster finally with the break of O-Ni bonds. The O-Ni bonds are demonstrated to be weaker than the O-Al bonds, and the reduced tensile strength originates from such weaker O-Ni bonds. A void-like structure forms after the break of the O-Ni and some Ni-Al bonds. Such a void-like structure can act as the initial nucleation or the propagation path of the crack, and thus produce large effects on the mechanical properties of NiAl.

Formation of a coplanar O-Al bonding cluster: the effect of O impurity on a Σ = 5 NiAl grain boundary from first-principles.

The site occupancy, structure, and bonding properties of O in an NiAl grain boundary (GB) have been investigated by employing a first-principles total energy method based on density functional theory with the generalized gradient approximation and ultrasoft pseudopotential. The Σ5(310)/[001] tilt GB of NiAl has been chosen because (i) the Σ = 5 GB has been observed to be a higher fraction in NiAl experimentally, and (ii) the Σ5(310)/[001] is energetically favorable in comparison with the Σ5(210)/[001]. The NiAl GB is shown to favor the O segregation with a segregation energy of -1.75 eV, indicating that most of the O impurity will distribute in the NiAl GB thermodynamically. Moreover, O is shown to prefer occupying the interstitial sites rather than the substitutional sites in the GB according to the calculated formation energies. The O-Al bond is energetically favorable as compared with the O-Ni bond due to different electronegativity of Al and Ni in reference to O. Charge distribution and the density of states further indicate the intrinsic bonding properties of O-Al that contain obvious covalent characteristics. It is interesting to find that O is coplanar with the surrounding Al atoms in both interstitial and substitutional cases with lower formation energies, forming stronger coplanar O-Al bonding clusters. Such stronger bonding clusters in the GB can embrittle the NiAl intermetallics and thus are not beneficial to the plasticity of NiAl. Our results will provide a useful reference for improving the mechanical properties and for understanding the oxidation effect of the NiAl intermetallics.