Emerging blaNDM-positive Salmonella enterica in Chinese pediatric infections.

Non-typhoidal Salmonella (NTS) is a common zoonotic foodborne pathogen, whose rising antimicrobial resistance has been an urgent threat to global public health. Here, we reported two carbapenem-resistant Salmonella enterica (CRSE) strains (NBFE-049 and NBFE-164) carrying the blaNDM genes, which were recovered from two Chinese children, belonged to Salmonella enterica serovar Typhimurium (S. Typhimurium) monophasic variant (S. 1,4,[5],12:i:-) ST34 (a sequence type) and S. Typhimurium ST19, respectively. Genes blaNDM-5 and blaNDM-13 were detected in NBFE-049 and NBFE-164, respectively. The blaNDM-5 in NBFE-049 was located in an IncHI2-type plasmid, named pNBFE-049. In NBFE-164, the blaNDM-13 was located in an IncI1-type plasmid, named pNBFE-164. The plasmid pNBFE-164 successfully transferred its resistance phenotype into the recipient strain Escherichia coli J53 with a high efficiency of 1.1 × 10-2, while no transconjugants were obtained in pNBFE-049 conjugation assays. We further elucidated the genetic relationships of globally occurring New Delhi Metallo-ß-lactamase (NDM)-positive strains and locally distributed clinical strains within the same serovar. The closest relative of NBFE-049 was clinical Salmonella strain 1722, which was recovered in 2020 and differed by only three Single Nucleotide Polymorphisms (SNPs). No NDM-positive ST19 could be found in the National Center for Biotechnology Information (NCBI) database, and NBFE-164 showed a close genetic relationship with the other ST19 in this area. To sum up, we suggested the potential contributions of clonal spread and plasmid-mediated blaNDM transfer in CRSE dissemination. This study reported the complete genome of two blaNDM-carrying S. Typhimurium isolates, shedding new insights into the antimicrobial resistance mechanisms and dissemination patterns of the emerging CRSE.IMPORTANCENTS is one of the most common zoonotic pathogens that causes foodborne illnesses, while S. Typhimurium is one of the most common serovars. With the rising prevalence of multi-resistant Salmonella worldwide, carbapenems have emerged as the last-line antibiotics for treating severe bacterial infections. In this study, we reported the genomic characteristics of two carbapenem-resistant S. Typhimurium strains, which were recovered from two pediatric patients, carrying blaNDM-5 and blaNDM-13, providing new insights into the antimicrobial resistance deteriminants and transmission risk of blaNDM-positive NTS in China. We suggested the potential contributions of clonal spread and plasmid-mediated blaNDM transfer in CRSE dissemination. Future enhanced surveillance policy should mitigate CRSE spreading, and more importantly, clinical antimicrobial therapeutic regimens should be adjusted accordingly.

A Calculation Method of Bearing Balls Rotational Vectors Based on Binocular Vision Three-Dimensional Coordinates Measurement.

The rotational speed vectors of the bearing balls affect their service life and running performance. Observing the actual rotational speed of the ball is a prerequisite for revealing its true motion law and conducting sliding behavior simulation analysis. To address the need for accuracy and real-time measurement of spin angular velocity, which is also under high-frequency and high-speed ball motion conditions, a new measurement method of ball rotation vectors based on a binocular vision system is proposed. Firstly, marker points are laid on the balls, and their three-dimensional (3D) coordinates in the camera coordinate system are calculated in real time using the triangulation principle. Secondly, based on the 3D coordinates before and after the movement of the marker point and the trajectory of the ball, the mathematical model of the spin motion of the ball was established. Finally, based on the ball spin motion model, the three-dimensional vision measurement technology was first applied to the measurement of the bearing ball rotation vector through formula derivation, achieving the analysis of bearing ball rolling and sliding characteristics. Experimental results demonstrate that the visual measurement system with the frame rate of 100 FPS (frames per second) yields a measurement error within ±0.2% over a speed range from 5 to 50 RPM (revolutions per minute), and the maximum measurement errors of spin angular velocity and linear velocity are 0.25 °/s and 0.028 mm/s, respectively. The experimental results show that this method has good accuracy and stability in measuring the rotation vector of the ball, providing a reference for bearing balls' rotational speed monitoring and the analysis of the sliding behavior of bearing balls.

Lanthanide-Like Contraction Enables the Fabrication of High-Purity Selenium Films for Efficient Indoor Photovoltaics.

The lanthanide contraction involves a reduction in atomic radius among f-block elements below the expected level. A similar contraction is observed in group-16 elements. The atomic radius of Se (117 pm) is slightly larger than that of S (104 pm) arising from the presence of d electrons, compared to the significant increase in atomic radius from O (73 pm) to S. This lanthanide-like contraction contributes to Se's robust oxidative resistance. Here we report a selective oxidation strategy utilizing Se's strong antioxidative property to remove coexisting narrow-bandgap Te impurities from Se feedstocks. This strategy selectively oxidizes volatile Te impurities into involatile TeO2 that remains in the evaporation source, while only volatile Se deposits onto the substrate during the thermal-evaporation deposition process. This enables the fabrication of high-purity Se films possessing a wide bandgap of 1.88 eV, ideally suited to the optimal bandgap for indoor photovoltaics (IPVs). The resulting Se photovoltaics exhibit an efficiency of 20.1% under 1000-lux indoor illumination, outperforming market-dominant amorphous silicon and all types of lead-free perovskite IPVs. Unencapsulated Se devices show no efficiency degradation after 20,000 hours of storage in ambient atmosphere.

Unusual defect properties of the one-dimensional photovoltaic semiconductor selenium.

Defect tolerance is crucial in photovoltaic absorbers. Here we report that trigonal selenium (t-Se) exhibits a perovskite-like antibonding valence band maximum arising from Se p-p coupling. This results in the shallow nature of dominant Se vacancy defects. We further reveal the unique defect self-healing characteristic of Se intrinsic point defects.

A systematic review on electrochemical sensors for the detection of acetaminophen.

Considerable progress has been made in the electrochemical determination of acetaminophen (AP) over the past few decades. Nanomaterials or enzymes as electrode modifiers greatly improve the performance of AP electrochemical sensors. This review focuses on the development potential, detection principles and techniques for the electrochemical analysis of AP. In particular, the design and construction of AP electrochemical sensors are discussed from the perspective of non-enzyme materials (such as nanomaterials, including precious metals, transition metals and non-metals) and enzyme substances (such as aryl acylamidase, polyphenol oxidase and horseradish peroxidase). Moreover, the influencing factors for AP electrochemical sensors and the simultaneous detection of AP and other targets are summarized, and the future prospective of AP electrochemical sensors is outlined. This review provides a reference and guidance for the development and application of electrochemical sensors for AP detection.

SE-FSCNet: full-scale connection network for single-shot phase demodulation.

The accuracy of phase demodulation has significant impact on the accuracy of fringe projection 3D measurement. Currently, researches based on deep learning methods for extracting wrapped phase mostly use U-Net as the subject of network. The connection method between its hierarchies has certain shortcomings in global information transmission, which hinders the improvement of wrapped phase prediction accuracy. We propose a single-shot phase demodulation method for fringe projection based on a novel full-scale connection network SE-FSCNet. The encoder and decoder of the SE-FSCNet have the same number of hierarchies but are not completely symmetrical. At the decoder a full-scale connection method and feature fusion module are designed so that SE-FSCNet has better abilities of feature transmission and utilization compared with U-Net. A channel attention module based on squeeze and excitation is also introduced to assign appropriate weights to features with different scales, which has been proved by the ablation study. The experiments conducted on the test set have demonstrated that the SE-FSCNet can achieve higher precision than the traditional Fourier transform method and the U-Net in phase demodulation.

Genomic investigation and nationwide tracking of pediatric invasive nontyphoidal Salmonella in China.

Invasive nontyphoidal Salmonella (iNTS) causes significant concern with ~15% morbidity, affecting populations mainly in African countries. However, iNTS infections among the Chinese pediatric population remain largely unknown. Here, we conducted a genomic investigation to study pediatric iNTS infections in a Chinese hospital. iNTS isolates accounted for 15.2% (18/119) of all nontyphoidal Salmonella (NTS) strains. Compared to non-iNTS isolates, iNTS isolates harbored a lower prevalence of antimicrobial-resistant genes of fluoroquinolones and ß-lactams, as well as disinfectant determinants and plasmids, but carried a significantly higher prevalence of cdtB, faeCDE, and tcpC genes. Importantly, we detected an emerging serovar Goldcoast as the predominant iNTS serovar locally. By integrating 320 global Goldcoast genomes based on the One Health samplings, we conducted nationwide phylogenomic tracking and detected repeated human-to-human transmission events among iNTS cases caused by an underestimated serovar Goldcoast. Together, our exploratory genomic approach highlights a new trend in pediatric iNTS infections.

Cation vacancy modulated Cu3P-CoP heterostructure electrocatalyst for boosting hydrogen evolution at high current densities and coupling Zn-H2O battery.

Exploiting highly efficient, cost-effective and stable electrocatalysts is key to decreasing hydrogen evolution reaction (HER) kinetics energy barrier. Herein, the alkaline HER kinetics energy barrier can greatly reduce by the joint strategies of the cation vacancy and heterostructure engineering, which is seldom explored and remains ambiguous. In this study, an efficient and stable copper foam-supported Cu3P-CoP heterostructure electrocatalyst with cation vacancy defects (defined as Cu3P-CoP-VAl/CF) was designed for HER via the successive coprecipitation, electrodeposition, alkali etching and phosphorization treatments. As anticipated, the as-obtained Cu3P-CoP-VAl/CF electrocatalyst reveals a remarkable catalytic activity for HER with a low overpotential of 205 mV at a current density of 100 mA·cm-2, a high turnover frequency value of 1.05 s-1 at an overpotential of 200 mV and a small apparent activation energy (Ea) of 9 kJ·mol-1, while shows superior long-term stability at large current densities of 100 and 240 mA·cm-2. Systematic experiment and characterization data demonstrate that the formed cation vacancy could optimize the Ea, leading to the decrease of the kinetic barriers of Cu3P-CoP/CF heterostructure, as well as the established heterogeneous interface induced a synergistic effect between biphasic components on boosting the kinetics toward HER. The results of density functional theory disclose that the synergistic effect of Cu3P-CoP heterostructure could decrease the energy barrier and optimize Gibbs free energy of hydrogen adsorption, resulting in the enhancement of intrinsic catalytic activity of Cu3P-CoP-VAl/CF. More significantly, the alkali-cell assembled by Cu3P-CoP-VAl/CF (cathode) and RuO2/CF (anode) behaves outstanding water splitting performance, delivering a current density of 10 mA·cm-2 at a relatively small applied voltage of 1.58 V, along with encouraging long-term durability. In addition, the alkaline Zn-H2O battery with Cu3P-CoP-VAl/CF as the cathode has been fabricated for the simultaneous generation of electricity and hydrogen, which displays a large power density of up to 4.1 mW·cm-2. The work demonstrates that rational strategy for the design of competent electrocatalysts can effectively accelerate the kinetics of HER, which supplies valuable insights for practical applications in overall water splitting.

PaCS-Toolkit: Optimized Software Utilities for Parallel Cascade Selection Molecular Dynamics (PaCS-MD) Simulations and Subsequent Analyses.

Parallel cascade selection molecular dynamics (PaCS-MD) is an enhanced conformational sampling method conducted as a "repetition of time leaps in parallel worlds", comprising cycles of multiple molecular dynamics (MD) simulations performed in parallel and selection of the initial structures of MDs for the next cycle. We developed PaCS-Toolkit, an optimized software utility enabling the use of different MD software and trajectory analysis tools to facilitate the execution of the PaCS-MD simulation and analyze the obtained trajectories, including the preparation for the subsequent construction of the Markov state model. PaCS-Toolkit is coded with Python, is compatible with various computing environments, and allows for easy customization by editing the configuration file and specifying the MD software and analysis tools to be used. We present the software design of PaCS-Toolkit and demonstrate applications of PaCS-MD variations: original targeted PaCS-MD to peptide folding; rmsdPaCS-MD to protein domain motion; and dissociation PaCS-MD to ligand dissociation from adenosine A2A receptor.

Sustainable Recycling of Selenium-Based Optoelectronic Devices.

Selenium (Se), the world's oldest optoelectronic material, has been widely applied in various optoelectronic devices such as commercial X-ray flat-panel detectors and photovoltaics. However, despite the rare and widely-dispersed nature of Se element, a sustainable recycling of Se and other valuable materials from spent Se-based devices has not been developed so far. Here a sustainable strategy is reported that makes use of the significantly higher vapor pressure of volatile Se compared to other functional layers to recycle all of them from end-of-life Se-based devices through a closed-space evaporation process, utilizing Se photovoltaic devices as a case study. This strategy results in high recycling yields of ≈ 98% for Se and 100% for other functional materials including valuable gold electrodes and glass/FTO/TiO2 substrates. The refabricated photovoltaic devices based on these recycled materials achieve an efficiency of 12.33% under 1000-lux indoor illumination, comparable to devices fabricated using commercially sourced materials and surpassing the current indoor photovoltaic industry standard of amorphous silicon cells.

A Coupled Calibration Method for Dual Cameras-Projector System with Sub-Pixel Accuracy Feature Extraction.

Binocular structured light systems are widely used in 3D measurements. In the condition of complex and local highly reflective scenes, to obtain more 3D information, binocular systems are usually divided into two pairs of devices, each having a Single Camera and a Projector (SCP). In this case, the binocular system can be seen as Dual Cameras-Projector (DCP) system. In the DCP calibration, the Left-SCP and Right-SCP need to be calibrated separately, which leads to inconsistent parameters for the same projector, thus reducing the measurement accuracy. To solve this problem and improve manoeuvrability, a coupled calibration method using an orthogonal phase target is proposed. The 3D coordinates on a phase target are uniquely determined by the binocular camera in DCP, rather than being calculated separately in each SCP. This ensures the consistency of the projector parameters. The coordinates of the projector image plane are calculated through the unwrapped phase, while the parameters are calibrated by the plane calibration method. In order to extract sub-pixel accuracy feature points, a method based on polynomial fitting using an orthogonal phase target is exploited. The experimental results show that the reprojection error of our method is less than 0.033 pixels, which improves the calibration accuracy.

Structure of Amorphous Selenium: Small Ring, Big Controversy.

Selenium (Se) discovered in 1817 belongs to the family of chalcogens. Surprisingly, despite the long history of over two centuries and the chemical simplicity of Se, the structure of amorphous Se (a-Se) remains controversial to date regarding the dominance of chains versus rings. Here, we find that vapor-deposited a-Se is composed of disordered rings rather than chains in melt-quenched a-Se. We further reveal that the main origin of this controversy is the facile transition of rings to chains arising from the inherent instability of rings. This transition can be inadvertently triggered by certain characterization techniques themselves containing above-bandgap illumination (above 2.1 eV) or heating (above 50 °C). We finally build a roadmap for obtaining accurate Raman spectra by using above-bandgap excitation lasers with low photon flux (below 1017 phs m-2 s-1) and below-bandgap excitation lasers measured at low temperatures (below -40 °C) to minimize the photoexcitation- and heat-induced ring-to-chain transitions.

Synthesis of uniformly dispersed Fe2TiO5 nanodisks: a sensitive photoelectrochemical sensor for glucose monitoring in human blood serum.

A novel photoelectrochemical (PEC) sensor was constructed, using Fe2TiO5 nanodisks under visible-light irradiation, for the determination of glucose in human blood serum. The uniformly dispersed Fe2TiO5 nanodisks were synthesized for the first time by an ion exchange method and subsequent heat treatment. As excellent catalysts, the Fe2TiO5 nanodisks can directly catalyze the oxidation of glucose to produce current in the absence of glucose oxidase. Compared with commercial TiO2, the Fe2TiO5 nanodisks exhibit better activity in the electrocatalytic oxidation of glucose and can generate a photocurrent as a signal for glucose detection. The PEC sensor shows a wide linear range (4 µM-10 mM), a low limit of detection (0.588 µM) and a super sensitivity of 2653 µA mM-1 cm-2, which are much better than similar configurations reported previously. This PEC sensor has been successfully used to monitor glucose in human blood serum. Moreover, this PEC glucose sensor based on Fe2TiO5 nanodisks possesses great potential for application in point-of-care clinical diagnosis.

A polyaniline functionalized NiFeP nanosheet array-based electrochemical immunosensor using Au/Cu2O nanocubes as a signal amplifier for the detection of SARS-CoV-2 nucleocapsid protein.

Coronavirus disease 2019 (COVID-19) is an infectious disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which emerged as a novel pathogen in 2019. The virus is responsible for a severe acute respiratory syndrome outbreak, affecting the respiratory system of infected individuals. COVID-19 is a super amplifier of basic diseases, and the disease with basic diseases is often more serious. Controlling the spread of the COVID-19 pandemic relies heavily on the timely and accurate detection of the virus. To resolve the problem, a polyaniline functionalized NiFeP nanosheet array-based electrochemical immunosensor using Au/Cu2O nanocubes as a signal amplifier is fabricated for the detection of SARS-CoV-2 nucleocapsid protein (SARS-CoV-2 NP). Polyaniline (PANI) functionalized NiFeP nanosheet arrays are synthesized as an ideal sensing platform for the first time. PANI is coated on the surface of NiFeP by electropolymerization to enhance biocompatibility, beneficial for the efficient loading of the capture antibody (Ab1). Significantly, Au/Cu2O nanocubes possess excellent peroxidase-like activity and exhibit outstanding catalytic activity for the reduction of H2O2. Therefore, Au/Cu2O nanocubes combine with a labeled antibody (Ab2) through the Au-N bond to form labeled probes, which can effectively amplify current signals. Under optimal conditions, the immunosensor for the detection of SARS-CoV-2 NP shows a wide linear range of 10 fg mL-1-20 ng mL-1 and a low detection limit of 1.12 fg mL-1 (S/N = 3). It also exhibits desirable selectivity, repeatability, and stability. Meanwhile, the excellent analytical performance in human serum samples confirms the practicality of the PANI functionalized NiFeP nanosheet array-based immunosensor. The electrochemical immunosensor based on the Au/Cu2O nanocubes as a signal amplifier demonstrates great potential for application in the personalized point-of-care (POC) clinical diagnosis.

A SERS Biosensor Based on Functionalized Au-SiNCA Integrated with a Dual Signal Amplification Strategy for Sensitive Detection of Telomerase Activity During EMT in Laryngeal Carcinoma.

Purpose: This paper aims to construct a surface-enhanced Raman spectroscopy (SERS) biosensor based on functionalized Au-Si nanocone arrays (Au-SiNCA) using a dual signal amplification strategy (SDA-CHA) to evaluate telomerase activity during epithelial-mesenchymal transition (EMT) in laryngeal carcinoma (LC). Methods: A SERS biosensor based on functionalized Au-SiNCA was designed with an integrated dual-signal amplification strategy to achieve ultrasensitive detection of telomerase activity during EMT in LC patients. Results: Labeled probes (Au-AgNRs@4-MBA@H1) and capture substrates (Au-SiNCA@H2) were prepared by modifying hairpin DNA and Raman signal molecules. Using this scheme, telomerase activity in peripheral mononuclear cells (PMNC) could be successfully detected with a limit of detection (LOD) as low as 10-6 IU/mL. In addition, biological experiments using BLM treatment of TU686 effectively mimicked the EMT process. The results of this scheme were highly consistent with the ELISA scheme, confirming its accuracy. Conclusion: This scheme provides a reproducible, selective, and ultrasensitive assay for telomerase activity, which is expected to be a potential tool for the early screening of LC in future clinical applications.

A Study of the Mechanisms and Characteristics of Fluorescence Enhancement for the Detection of Formononetin and Ononin.

In this work, the origins for the spectral difference between two isoflavones, formononetin (F) and ononin (FG), are revealed via a comparison study of the fluorescence molecular structure. The fluorescence enhancement of FG in hot alkaline conditions is reported for the first time. For F, there is almost no fluorescence under acidic conditions, but when the pH is >4.8, its fluorescence begins to increase due to the deprotonation of 7-OH. Under a pH between 9.3 and 12.0, the anionic form of F produces a strong and stable fluorescence. The fluorescence quantum yield (Yf) of F is measured to be 0.042. FG shows only weak fluorescence in aqueous solutions under a wide range of pH until it is placed in hot alkaline solutions, which is attributed to the cleavage reaction of the γ-pyrone ring in FG. The Yf of FG is determined to be 0.020. Based on the fluorescence sensitization methods of F and FG, the quantitative analysis and detection of two substances can be realized. The limit of the detections for F and FG are 2.60 ng·mL-1 and 9.30 ng·mL-1, respectively. The linear detection ranges of F and FG are 11.7~1860 ng·mL-1 and 14.6~2920 ng·mL-1, respectively. Although the structural relationship between F and FG is glycoside and aglycone, under hot alkaline conditions, the final products after the cleavage and hydrolysis reactions are essentially different. The different fluorescence characteristics between F and FG pave a way for further identification and a quantitative analysis of the corresponding components in Chinese herbal medicine.

Indoor photovoltaics awaken the world's first solar cells.

Selenium (Se) solar cells were the world's first solid-state photovoltaics reported in 1883, opening the modern photovoltaics. However, its wide bandgap (~1.9 eV) limits sunlight harvesting. Here, we revisit the world's oldest but long-ignored photovoltaic material with the emergence of indoor photovoltaics (IPVs); the absorption spectrum of Se perfectly matches the emission spectra of commonly used indoor light sources in the 400 to 700 nm range. We find that the widely used Te adhesion layer also passivates defects at the nonbonded Se/TiO2 interface. By optimizing the Te coverage from 6.9 to 70.4%, the resulting Se cells exhibit an efficiency of 15.1% under 1000 lux indoor illumination and show no efficiency loss after 1000 hours of continuous indoor illumination without encapsulation, outperforming the present IPV industry standard of amorphous silicon cells in both efficiency and stability. We further fabricate Se modules (6.75 cm2) that produce 232.6 µW output power under indoor illumination, powering a radio-frequency identification-based localization tag.

Rapid determination of SARS-CoV-2 nucleocapsid proteins based on 2D/2D MXene/P-BiOCl/Ru(bpy)32+ heterojunction composites to enhance electrochemiluminescence performance.

At the end of 2019, the novel coronavirus disease 2019 (COVID-19), a cluster of atypical pneumonia caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has been known as a highly contagious disease. Herein, we report the MXene/P-BiOCl/Ru(bpy)32+ heterojunction composite to construct an electrochemiluminescence (ECL) immunosensor for SARS-CoV-2 nucleocapsid protein (CoVNP) determination. Two-dimensional (2D) material ultrathin phosphorus-doped bismuth oxychloride (P-BiOCl) is exploited and first applied in ECL. 2D architectures MXene not only act as "soft substrate" to improve the properties of P-BiOCl, but also synergistically work with P-BiOCl. Owing to the inimitable set of bulk and interfacial properties, intrinsic high electrochemical conductivity, hydrophilicity and good biocompatible of 2D/2D MXene/P-BiOCl/Ru(bpy)32+, this as-exploited heterojunction composite is an efficient signal amplifier and co-reaction accelerator in the presence of tri-n-propylamine (TPA) as a coreactant. The proposed MXene/P-BiOCl/Ru(bpy)32+-TPA system exhibits a high and stable ECL signal and achieves ECL emission quenching for "signal on-off" recognition of CoVNP. Fascinatingly, the constructed ECL biosensor towards CoVNP allows a wide linear concentration range from 1 fg/mL to 10 ng/mL and a low limit of detection (LOD) of 0.49 fg/mL (S/N = 3). Furthermore, this presented strategy sheds light on designing a highly efficient ECL nanostructure through the combination of 2D MXene architectures with 2D semiconductor materials in the field of nanomedicine. This ECL biosensor can successfully detect CoVNP in human serum, which can promote the prosperity and development of diagnostic methods of SARS-CoV-2.