Design and optimization of membrane chromatography for monoclonal antibody charge variant separation.

The manufacturing scale implementation of membrane chromatography to purify monoclonal antibodies has gradually increased with the shift in industry focus toward flexible manufacturing and disposable technologies. Membrane chromatography are used to remove process-related impurities such as host cell proteins (HCPs) and DNA, leachates, and endotoxins, with improved productivity and process flexibility. However, application of membrane chromatography to separate product-related variants such as charge variants has not gained major traction due to low-binding capacity. The work reported here demonstrates that a holistic process development strategy to optimize static binding (pH and salt concentration) and dynamic process (membrane loading, flowrate, and gradient length) parameters can alleviate the capacity limitations. The study employed high throughput screening tools and scale-down membranes for intermediate and polishing purification of the model monoclonal antibody. An optimized process consisting of anion exchange and cation exchange membrane chromatography reduced the acidic variants present in Protein A eluate from 89.5% to 19.2% with 71% recovery of the target protein. The membrane chromatography process also cleared HCP to below limit of detection with 6- to 30-fold higher membrane loading, compared to earlier reported values. The results confirm that membrane chromatography is effective in separating closely related product variants when supported by a well-defined process development strategy.

Strategies for developing a recombinant butyrylcholinesterase medical countermeasure for Organophosphorus poisoning.

Organophosphorus nerve agents represent a serious chemical threat due to their ease of production and scale of impact. The recent use of the nerve agent Novichok has re-emphasised the need for broad-spectrum medical countermeasures (MCMs) to these agents. However, current MCMs are limited. Plasma derived human butyrylcholinesterase (huBChE) is a promising novel bioscavenger MCM strategy, but is prohibitively expensive to isolate from human plasma at scale. Efforts to produce recombinant huBChE (rBChE) in various protein expression platforms have failed to achieve key critical attributes of huBChE such as circulatory half-life. These proteins often lack critical features such as tetrameric structure and requisite post-translational modifications. This review evaluates previous attempts to generate rBChE and assesses recent advances in mammalian cell expression and protein engineering strategies that could be deployed to achieve the required half-life and yield for a viable rBChE MCM. This includes the addition of a proline-rich attachment domain, fusion proteins, post translational modifications, expression system selection and optimised downstream processes. Whilst challenges remain, a combinatorial application of these strategies demonstrates potential as a technically feasible approach to achieving a bioactive and cost effective bioscavenger MCM.

Protein Expression Optimization Strategies in E. coli: A Tailored Approach in Strain Selection and Parallelizing Expression Conditions.

Escherichia coli remains a traditional and widely used host organism for recombinant protein production. Its well-studied genome, availability of vectors and strains, cheap and relatively straight-forward cultivation methods paired with reported high protein yields are reasons why E. coli is often the first-choice host expression system for recombinant protein production. The chapter enclosed here details protocols and design strategies in strain selection and methods on how to parallelize expression conditions to optimize for soluble target protein expression in E. coli. The methods described have been validated in a protein production research facility.

Ambient Temperature Stable, Scalable COVID-19 Polymer Particle Vaccines Induce Protective Immunity.

There is an unmet need for safe and effective severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) vaccines that are stable and can be cost-effectively produced at large scale. Here, a biopolymer particle (BP) vaccine technology that can be quickly adapted to new and emerging variants of SARS-CoV-2 is used. Coronavirus antigen-coated BPs are described as vaccines against SARS-CoV-2. The spike protein subunit S1 or epitopes from S and M proteins (SM) plus/minus the nucleocapsid protein (N) are selected as antigens to either coat BPs during assembly inside engineered Escherichia coli or BPs are engineered to specifically ligate glycosylated spike protein (S1-ICC) produced by using baculovirus expression in insect cell culture (ICC). BP vaccines are safe and immunogenic in mice. BP vaccines, SM-BP-N and S1-ICC-BP induced protective immunity in the hamster SARS-CoV-2 infection model as shown by reduction of virus titers up to viral clearance in lungs post infection. The BP platform offers the possibility for rapid design and cost-effective large-scale manufacture of ambient temperature stable and globally available vaccines to combat the coronavirus disease 2019 (COVID-19) pandemic.

Yeast-based bioproduction of disulfide-rich peptides and their cyclization via asparaginyl endopeptidases.

Cyclic disulfide-rich peptides have attracted significant interest in drug development and biotechnology. Here, we describe a protocol for producing cyclic peptide precursors in Pichia pastoris that undergo in vitro enzymatic maturation into cyclic peptides using recombinant asparaginyl endopeptidases (AEPs). Peptide precursors are expressed with a C-terminal His tag and secreted into the media, enabling facile purification by immobilized metal affinity chromatography. After AEP-mediated cyclization, cyclic peptides are purified by reverse-phase high-performance liquid chromatography and characterized by mass spectrometry, peptide mass fingerprinting, NMR spectroscopy, and activity assays. We demonstrate the broad applicability of this protocol by generating cyclic peptides from three distinct classes that are either naturally occurring or synthetically backbone cyclized, and range in size from 14 amino acids with one disulfide bond, to 34 amino acids with a cystine knot comprising three disulfide bonds. The protocol requires 14 d to identify and optimize a high-expressing Pichia clone in small-scale cultures (24 well plates or 50 mL tubes), after which large-scale production in a bioreactor and peptide purification can be completed in 10 d. We use the cyclotide Momordica cochinchinensis trypsin inhibitor II as an example. We also include a protocol for recombinant AEP production in Escherichia coli as AEPs are emerging tools for orthogonal peptide and protein ligation. We focus on two AEPs that preferentially cyclize different peptide precursors, namely an engineered AEP with improved catalytic efficiency [C247A]OaAEP1b and the plant-derived MCoAEP2. Rudimentary proficiency and equipment in molecular biology, protein biochemistry and analytical chemistry are needed.

Intensified Downstream Processing of Monoclonal Antibodies Using Membrane Technology.

The need to intensify downstream processing of monoclonal antibodies to complement the advances in upstream productivity has led to increased attention toward implementing membrane technologies. With the industry moving toward continuous operations and single use processes, membrane technologies show promise in fulfilling the industry needs due to their operational flexibility and ease of implementation. Recently, the applicability of membrane-based unit operations in integrating the downstream process has been explored. In this article, the major developments in the application of membrane-based technologies in the bioprocessing of monoclonal antibodies are reviewed. The recent progress toward developing intensified end-to-end bioprocesses and the critical role membrane technology will play in achieving this goal are focused upon.

Chimeric Murine Polyomavirus Virus-Like Particles Induce Plasmodium Antigen-Specific CD8+ T Cell and Antibody Responses.

An effective vaccine against the Plasmodium parasite is likely to require the induction of robust antibody and T cell responses. Chimeric virus-like particles are an effective vaccine platform for induction of antibody responses, but their capacity to induce robust cellular responses and cell-mediated protection against pathogen challenge has not been established. To evaluate this, we produced chimeric constructs using the murine polyomavirus structural protein with surface-exposed CD8+ or CD4+ T cell or B cell repeat epitopes derived from the Plasmodium yoelii circumsporozoite protein, and assessed immunogenicity and protective capacity in a murine model. Robust CD8+ T cell responses were induced by immunization with the chimeric CD8+ T cell epitope virus-like particles, however CD4+ T cell responses were very low. The B cell chimeric construct induced robust antibody responses but there was no apparent synergy when T cell and B cell constructs were administered as a pool. A heterologous prime/boost regimen using plasmid DNA priming followed by a VLP boost was more effective than homologous VLP immunization for cellular immunity and protection. These data show that chimeric murine polyomavirus virus-like particles are a good platform for induction of CD8+ T cell responses as well as antibody responses.

Synthetic biology for bioengineering virus-like particle vaccines.

Vaccination is the most effective method of disease prevention and control. Many viruses and bacteria that once caused catastrophic pandemics (e.g., smallpox, poliomyelitis, measles, and diphtheria) are either eradicated or effectively controlled through routine vaccination programs. Nonetheless, vaccine manufacturing remains incredibly challenging. Viruses exhibiting high antigenic diversity and high mutation rates cannot be fairly contested using traditional vaccine production methods and complexities surrounding the manufacturing processes, which impose significant limitations. Virus-like particles (VLPs) are recombinantly produced viral structures that exhibit immunoprotective traits of native viruses but are noninfectious. Several VLPs that compositionally match a given natural virus have been developed and licensed as vaccines. Expansively, a plethora of studies now confirms that VLPs can be designed to safely present heterologous antigens from a variety of pathogens unrelated to the chosen carrier VLPs. Owing to this design versatility, VLPs offer technological opportunities to modernize vaccine supply and disease response through rational bioengineering. These opportunities are greatly enhanced with the application of synthetic biology, the redesign and construction of novel biological entities. This review outlines how synthetic biology is currently applied to engineer VLP functions and manufacturing process. Current and developing technologies for the identification of novel target-specific antigens and their usefulness for rational engineering of VLP functions (e.g., presentation of structurally diverse antigens, enhanced antigen immunogenicity, and improved vaccine stability) are described. When applied to manufacturing processes, synthetic biology approaches can also overcome specific challenges in VLP vaccine production. Finally, we address several challenges and benefits associated with the translation of VLP vaccine development into the industry.

Antibody-Binding, Antifouling Surface Coatings Based on Recombinant Expression of Zwitterionic EK Peptides.

Development of antifouling films which selectively capture or target proteins of interest is essential for controlling interactions at the "bio/nano" interface. However, in order to synthesize biofunctional films from synthetic polymers that incorporate chemical "motifs" for surface immobilization, antifouling, and oriented biomolecule attachment, multiple reaction steps need to be carried out at the solid/liquid interface. EKx is a zwitterionic peptide that has previously been shown to have excellent antifouling properties. In this study, we recombinantly expressed EKx peptides and genetically encoded both surface attachment and antibody-binding motifs, before characterizing the resultant biopolymers by traditional methods. These peptides were then immobilized to organosilica nanoparticles for binding IgG, and subsequently capturing dengue NS1 as a model antigen from serum-containing solution. We found that a mixed layer of a short peptide (4.9 kDa) "backfilled" with a longer peptide terminated with an IgG-binding Z-domain (18 kDa) demonstrated selective capture of dengue NS1 protein down to ∼10 ng mL-1 in either PBS or 20% serum.

Progression of continuous downstream processing of monoclonal antibodies: Current trends and challenges.

Rapid advances in intensifying upstream processes for biologics production have left downstream processing as a bottleneck in the manufacturing scheme. Biomanufacturers are pursuing continuous downstream process development to increase efficiency and flexibility, reduce footprint and cost of goods, and improve product consistency and quality. Even after successful laboratory trials, the implementation of a continuous process at manufacturing scale is not easy to achieve. This paper reviews specific challenges in converting each downstream unit operation to a continuous mode. Key elements of developing practical strategies for overcoming these challenges are detailed. These include equipment valve complexity, favorable column aspect ratio, protein-A resin selection, quantitative assessment of chromatogram peak size and shape, holistic process characterization approach, and a customized process economic evaluation. Overall, this study provides a comprehensive review of current trends and the path forward for implementing continuous downstream processing at the manufacturing scale.

Baculovirus-driven protein expression in insect cells: A benchmarking study.

Baculovirus-insect cell expression system has become one of the most widely used eukaryotic expression systems for heterologous protein production in many laboratories. The availability of robust insect cell lines, serum-free media, a range of vectors and commercially-packaged kits have supported the demand for maximizing the exploitation of the baculovirus-insect cell expression system. Naturally, this resulted in varied strategies adopted by different laboratories to optimize protein production. Most laboratories have preference in using either the E. coli transposition-based recombination bacmid technology (e.g. Bac-to-Bac®) or homologous recombination transfection within insect cells (e.g. flashBAC™). Limited data is presented in the literature to benchmark the protocols used for these baculovirus vectors to facilitate the selection of a system for optimal production of target proteins. Taking advantage of the Protein Production and Purification Partnership in Europe (P4EU) scientific network, a benchmarking initiative was designed to compare the diverse protocols established in thirteen individual laboratories. This benchmarking initiative compared the expression of four selected intracellular proteins (mouse Dicer-2, 204 kDa; human ABL1 wildtype, 126 kDa; human FMRP, 68 kDa; viral vNS1-H1, 76 kDa). Here, we present the expression and purification results on these proteins and highlight the significant differences in expression yields obtained using different commercially-packaged baculovirus vectors. The highest expression level for difficult-to-express intracellular protein candidates were observed with the EmBacY baculovirus vector system.

Structural-based designed modular capsomere comprising HA1 for low-cost poultry influenza vaccination.

Highly pathogenic avian influenza (HPAI) viruses cause a severe and lethal infection in domestic birds. The increasing number of HPAI outbreaks has demonstrated the lack of capabilities to control the rapid spread of avian influenza. Poultry vaccination has been shown to not only reduce the virus spread in animals but also reduce the virus transmission to humans, preventing potential pandemic development. However, existing vaccine technologies cannot respond to a new virus outbreak rapidly and at a cost and scale that is commercially viable for poultry vaccination. Here, we developed modular capsomere, subunits of virus-like particle, as a low-cost poultry influenza vaccine. Modified murine polyomavirus (MuPyV) VP1 capsomere was used to present structural-based influenza Hemagglutinin (HA1) antigen. Six constructs of modular capsomeres presenting three truncated versions of HA1 and two constructs of modular capsomeres presenting non-modified HA1 have been generated. These modular capsomeres were successfully produced in stable forms using Escherichia coli, without the need for protein refolding. Based on ELISA, this adjuvanted modular capsomere (CaptHA1-3C) induced strong antibody response (almost 105endpoint titre) when administered into chickens, similar to titres obtained in the group administered with insect cell-based HA1 proteins. Chickens that received adjuvanted CaptHA1-3C followed by challenge with HPAI virus were fully protected. The results presented here indicate that this platform for bacterially-produced modular capsomere could potentially translate into a rapid-response and low-cost vaccine manufacturing technology suitable for poultry vaccination.

Evaluation of three adjuvants with respect to both adverse effects and the efficacy of antibody production to the Bm86 protein.

Cattle tick infestations remain an important burden for farmers in tropical area like in New Caledonia. With the development of acaricide resistance, tick vaccines should be an attractive alternative to control ticks but their efficacy needs to be improved. In this study three adjuvants were studied in an experimental tick vaccine with a Bm86 protein to assess their performance in terms of antibody productions and adverse reactions following vaccinations. The water-in-oil adjuvant ISA 61 VG led to higher antibody titers compared to a water-in-oil-in-water adjuvant ISA 201 VG and an aqueous polymeric adjuvant Montanide Gel 01. Vaccinations with these three adjuvants did not produce severe general reaction but an increase in skin thickness was observed especially with both oil-based emulsions. These results indicated that the water-in-oil adjuvant is the most interesting to use for this vaccine but local adverse reactions remain an issue.

Platform technologies for modern vaccine manufacturing.

Improved understanding of antigenic components and their interaction with the immune system, as supported by computational tools, permits a sophisticated approach to modern vaccine design. Vaccine platforms provide an effective tool by which strategically designed peptide and protein antigens are modularized to enhance their immunogenicity. These modular vaccine platforms can overcome issues faced by traditional vaccine manufacturing and have the potential to generate safe vaccines, rapidly and at a low cost. This review introduces two promising platforms based on virus-like particle and liposome, and discusses the methodologies and challenges.

Is Pichia pastoris a realistic platform for industrial production of recombinant human interferon gamma?

Human interferon gamma (hIFNγ) is an important cytokine in the innate and adaptive immune system, produced commercially in Escherichia coli. Efficient expression of hIFNγ has been reported once for Pichia pastoris (Wang et al., 2014) - a proven heterologous expression system. This study investigated hIFNγ expression in P. pastoris replicating the previous study and expanding by using four different strains (X33: wild type; GS115: HIS-Mut+; KM71H: Arg+, Mut- and CBS7435: MutS) and three different vectors (pPICZαA, pPIC9 and pPpT4αS). In addition, the native sequence (NS) and two codon-optimised sequences (COS1 and COS2) for P. pastoris were used. Methanol induction yielded no expression/secretion of hIFNγ in X33, highest levels were recorded for CBS7435: MutS (∼16 µg. L-1). mRNA copy number calculations acquired from RT-qPCR for GS115-pPIC9-COS1 proved low abundance of mRNA. A 10-fold increase in expression of hIFNγ was achieved by lowering the minimal free energy of the mRNA and 100-fold by MutS phenotypes, substantially lower than reported by Wang et al. (2014). We conclude that commercial production of low cost, eukaryotic recombinant hIFNγ is not an economically viable in P. pastoris. Further research is required to unravel the cause of low expression in P. pastoris to achieve economic viability.

Integrated molecular and bioprocess engineering for bacterially produced immunogenic modular virus-like particle vaccine displaying 18 kDa rotavirus antigen.

A high global burden of rotavirus disease and the unresolved challenges with the marketed rotavirus vaccines, particularly in the developing world, have ignited efforts to develop virus-like particle (VLP) vaccines for rotavirus. While rotavirus-like particles comprising multiple viral proteins can be difficult to process, modular VLPs presenting rotavirus antigenic modules are promising alternatives in reducing process complexity and cost. In this study, integrated molecular and bioprocess engineering approaches were used to simplify the production of modular murine polyomavirus capsomeres and VLPs presenting a rotavirus 18 kDa VP8* antigen. A single construct was generated for dual expression of non-tagged murine polyomavirus capsid protein VP1 and modular VP1 inserted with VP8*, for co-expression in Escherichia coli. Co-expressed proteins assembled into pentameric capsomeres in E. coli. A selective salting-out precipitation and a polishing size exclusion chromatography step allowed the recovery of stable modular capsomeres from cell lysates at high purity, and modular capsomeres were successfully translated into modular VLPs when assembled in vitro. Immunogenicity study in mice showed that modular capsomeres and VLPs induced high levels of VP8*-specific antibodies. Our results demonstrate that a multipronged synthetic biology approach combining molecular and bioprocess engineering enabled simple and low-cost production of highly immunogenic modular capsomeres and VLPs presenting conformational VP8* antigenic modules. This strategy potentially provides a cost-effective production route for modular capsomere and VLP vaccines against rotavirus, highly suitable to manufacturing economics for the developing world. Biotechnol. Bioeng. 2017;114: 397-406. © 2016 Wiley Periodicals, Inc.

Modular virus-like particles for sublingual vaccination against group A streptococcus.

Infection with Group A streptococcus (GAS)-an oropharyngeal pathogen-leads to mortality and morbidity, primarily among developing countries and indigenous populations in developed countries. The development of safe and affordable GAS vaccines is challenging, due to the presence of various unique GAS serotypes, antigenic variation within the same serotype, and potential auto-immune responses. In the present study, we evaluated the use of a sublingual freeze-dried (FD) formulation based on immunogenic modular virus-like particles (VLPs) carrying the J8 peptide (J8-VLPs) as a potential safe and cost-effective GAS vaccine for inducing protective systemic and mucosal immunity. By using in vivo tracing of the sublingual J8-VLPs, we visualized the draining of J8-VLPs into the submandibular lymph nodes, in parallel with its rapid absorption into the systemic circulation, which support the induction of effective immune responses in both systemic and mucosal compartments. The sublingual administration of J8-VLPs resulted in a high serum IgG antibody level, with a good balance of Th1 and Th2 immune responses. Of note, sublingual vaccination with J8-VLPs elicited high levels of IgA antibody in the saliva. The co-administration of mucosal adjuvant cholera toxin (CT) further enhanced the increase in salivary IgA antibody levels induced by the J8-VLPs formulation. Moreover, the levels of salivary IgA and serum IgG observed following the administration of the CT-adjuvanted FD formulation of J8-VLPs (FD-J8-VLPs) and non-FD formulation of J8-VLPs were comparable. In fact, the saliva isolated from mice immunized with J8-VLPs and FD-J8-VLPs with CT demonstrated opsonizing activity against GAS in vitro. Thus, we observed that the sublingually delivered FD formulation of microbially produced modular VLPs could prevent and control GAS diseases in endemic areas in a cost-effective manner.