Nanocomposite microbeads made of recycled polylactic acid for the magnetic solid phase extraction of xenobiotics from human urine.

Nanocomposite microbeads (average diameter = 10-100 µm) were prepared by a microemulsion-solidification method and applied to the magnetic solid-phase extraction (m-SPE) of fourteen analytes, among pesticides, drugs, and hormones, from human urine samples. The microbeads, perfectly spherical in shape to maximize the surface contact with the analytes, were composed of magnetic nanoparticles dispersed in a polylactic acid (PLA) solid bulk, decorated with multi-walled carbon nanotubes (mPLA@MWCNTs). In particular, PLA was recovered from filters of smoked electronic cigarettes after an adequate cleaning protocol. A complete morphological characterization of the microbeads was performed via Fourier-transform infrared (FTIR) spectroscopy, UV-Vis spectroscopy, thermogravimetric and differential scanning calorimetry analysis (TGA and DSC), scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The recovery study of the m-SPE procedure showed yields ≥ 64%, with the exception of 4-chloro-2-methylphenol (57%) at the lowest spike level (3 µg L-1). The method was validated according to the main FDA guidelines for the validation of bioanalytical methods. Using liquid chromatography-tandem mass spectrometry, precision and accuracy were below 11% and 15%, respectively, and detection limits of 0.1-1.8 µg L-1. Linearity was studied in the range of interest 1-15 µg L-1 with determination coefficients greater than 0.99. In light of the obtained results, the nanocomposite microbeads have proved to be a valid and sustainable alternative to traditional sorbents, offering good analytical standards and being synthetized from recycled plastic material. One of the main objectives of the current work is to provide an innovative and optimized procedure for the recycling of a plastic waste, to obtain a regular and reliable microstructure, whose application is here presented in the field of analytical chemistry. The simplicity and greenness of the method endows the procedure with a versatile applicability in different research and industrial fields.

A liquid chromatography-mass spectrometry method for the enantioselective multiresidue determination of nine chiral agrochemicals in urine using an enrichment procedure based on graphitized carbon black.

Many agrochemicals are chiral molecules, and most of them are marketed as racemates or diastereomeric mixtures. Stereoisomers that are not the active enantiomer have little or no pesticidal activity and can exert serious toxic effects towards non-target organisms. Thus, investigating the possible exposure to different isomers of chiral pesticides is an urgent need. The present work was aimed at developing a new enantioselective high-performance liquid chromatography-mass spectrometry method for the simultaneous determination of nine chiral pesticides in urine. Two solid-phase extraction (SPE) procedures, based on different carbon-based sorbents (graphitized carbon black (GCB) and buckypaper (BP)), were developed and compared. By using GCB, all analytes were recovered with yields ranging from 60 to 97%, while BP allowed recoveries greater than 54% for all pesticides except those with acid characteristics. Baseline separation was achieved for the enantiomers of all target agrochemicals on a Lux Cellulose-2 column within 24 min under reversed-phase mode. The developed method was then validated according to the FDA guidelines for bioanalytical methods. Besides recovery, the other evaluated parameters were precision (7-15%), limits of detection (0.26-2.21 µg/L), lower limits of quantitation (0.43-3.68 µg/L), linear dynamic range, and sensitivity. Finally, the validated method was applied to verify the occurrence of the pesticide enantiomers in urine samples from occupationally exposed workers.

An enantioselective high-performance liquid chromatography-mass spectrometry method to study the fate of quizalofop-P-ethyl in soil and selected agricultural products.

In this study, the attention was focused on quizalofop-ethyl, a chiral herbicide whose formulation has recently been marketed as quizalofop-P-ethyl, i.e. the (+)-enantiomer exhibiting herbicidal activity. To verify the real enantiomeric purity of this product as well as to study its environmental fate, the enantioselective separation of the P- and M- enantiomers of quizalofop-ethyl was achieved on Lux Cellulose-2 column (3­chloro,4-methylphenilcarbamate cellulose) under isocratic conditions in polar organic mode. Once established that the commercial formulation contains ˜ 0.6% (enantiomeric fraction) of M as an impurity, an HPLC-MS/MS method was developed, validated and applied to the analysis of soil, carrots and turnips treated with the herbicide. A simple solid-liquid extraction allowed recoveries greater than 70%; limits of detections of P and M enantiomers were below 5 ng g-1. The analyses of the real samples showed a modification of the enantiomeric fraction of quizalofop-M-ethyl between the commercial formulation (EFM = 0.63 ± 0.03%) and the analysed matrices (EFM = 7.6 ± 0.1% for carrots; EFM = 0% for the other matrices). This outcome highlighted the occurrence of an enantioselective biotic dissipation, responsible for a greater persistency of the distomer in carrots. On the other hand, since screening analyses revealed the occurrence of residues of the metabolite quizalofop-acid with the same EFs as the ester precursor, it was concluded that the hydrolytic conversion was an abiotic process.

Carbon nanomaterial-based membranes in solid-phase extraction.

Carbon nanomaterials (CNMs) have some excellent properties that make them ideal candidates as sorbents for solid-phase extraction (SPE). However, practical difficulties related to their handling (dispersion in the atmosphere, bundling phenomena, reduced adsorption capability, sorbent loss in cartridge/column format, etc.) have hindered their direct use for conventional SPE modes. Therefore, researchers working in the field of extraction science have looked for new solutions to avoid the above-mentioned problems. One of these is the design of CNM-based membranes. These devices can be of two different types: membranes that are exclusively composed of CNMs (i.e. buckypaper and graphene oxide paper) and polysaccharide membranes containing dispersed CNMs. A membrane can be used either as a filter, operating under flow-through mode, or as a rotating device, operating under the action of magnetic stirring. In both cases, the main advantages arising from the use of membranes are excellent results in terms of transport rates, adsorption capability, high throughput, and ease of employment. This review covers the preparation/synthesis procedures of such membranes and their potential in SPE applications, highlighting benefits and shortcomings in comparison with conventional SPE materials (especially, microparticles carbonaceous sorbents) and devices. Further challenges and expected improvements are addressed too.

Enantioselective high-performance liquid chromatographic separations to study occurrence and fate of chiral pesticides in soil, water, and agricultural products.

As many as 40% of all plant protection products currently used contain chiral active ingredients. Enantiomers of the same pesticide have identical physicochemical properties in an isotropic medium, but they may display different activity and toxicity because of their interaction with enzymes or other naturally occurring asymmetric molecules. This difference may also lead to variations in biotic degradation rates, making one enantiomer more persistent than the other in natural and agricultural environments. In terms of methodological aspects, this critical review describes the most used chiral stationary phases for HPLC enantioseparations of chiral pesticides, pinpointing their strengths and weaknesses. As far as their applicability is concerned, most research has been carried out by means of columns based on derivatized amylose/cellulose due to their rather universal analyte coverage. The chromatographic compatibility with sensitive detection techniques, such as mass spectrometry, has allowed the trace analysis of stereoisomers, revealing ubiquitous occurrence of some chiral pesticides in surface waters, sediments, plants, agricultural soils, roots, fruit and vegetables. The study of their distribution and degradation in various environmental compartments and agricultural soil-plant systems has highlighted the enrichment with one enantiomer over the other in certain matrices following the enantioselective dissipation catalysed by microorganisms or plant enzymes as well as the phenomenon of chiral inversion in some cases. Irrespective of the reliability of a chiral method, such investigations are often hindered by the lack of pure standards of single enantiomers, which makes it difficult to identify their stereochemical configuration and requires precise strategies of quantification. Surely, the research in this field has been grown over the last few years due to the necessity of assessing and limiting risks related to exposure to chiral pesticides, which can be considered emerging contaminants in all aspects.

The AuSc, AuTi, and AuFe molecules: Determination of the bond energies by Knudsen effusion mass spectrometry experiments combined with ab initio calculations.

The AuTi gaseous molecule was for the first time identified in vapors produced at high temperature from a gold-titanium alloy. The homogeneous equilibria AuTi(g) = Au(g) + Ti(g) (direct dissociation) and AuTi(g) + Au(g) = Au2(g) + Ti(g) (isomolecular exchange) were studied by Knudsen effusion mass spectrometry in the temperature range 2111-2229 K. The so determined equilibrium constants were treated by the "third-law method" of thermodynamic analysis, integrated with theoretical calculations, and the dissociation energy at 0 K was derived as D0K ° (AuTi) = 241.0 ± 5.2 kJ/mol. A similar investigation was carried out for the AuSc and AuFe species, whose dissociation energies were previously reported with large uncertainties. The direct dissociation and the isomolecular exchange with the Au2 dimer were studied in the 1969-2274 and 1842-2092 K ranges for AuSc and AuFe, respectively, and the dissociation energies derived as D0K ° (AuSc) = 240.4 ± 6.0 and D0K ° (AuFe) = 186.2 ± 4.2 kJ/mol. The experimental bond energies are compared with those calculated here by coupled cluster with single, double, and perturbative triple excitations with the correlation-consistent basis sets cc-pVXZ(-PP) and cc-pwCVXZ(-PP) (with X = T, Q, 5), also in the limit of complete basis set, and with those from complete active space self-consistent field-multi-reference configuration interaction calculations, recently available in the literature. The stronger bond of AuTi compared to AuFe parallels the trend observed in monochlorides. This analogy is shown to be more generally observed in the AuM and MCl diatomic series (with M = first row transition metal), in accordance with a picture of "pseudo-halogen" bonding behavior of gold.