Directly printed aligner therapy: A 12-month evaluation of application and effectiveness.

INTRODUCTION: Directly printed aligners (DPAs) are gaining in popularity, potentially streamlining manufacturing, decreasing environmental waste, and offering enhanced adaptation and tailoring. This transition has been facilitated by advances in materials, software, and production. Although DPAs may have enhanced versatility and application in the management of more complex malocclusions, there is little research evaluating their effectiveness. METHODS: A total of 54 patients undergoing treatment with DPAs were evaluated for occlusal improvement, overall treatment duration, and adverse effects. Regression models were fit to evaluate the association between the need for refinement, final peer assessment rating (PAR) score, and independent variables, including the total number of aligners and treatment indications. RESULTS: The mean number of aligners in the initial plan was 7.1 ± 2.9 and 5.1 ± 4.3 in maxillary and mandibular arches. Refinement was required in 40.8% (n = 20). The pretreatment PAR score of 17.01 ± 7.93 showed a significant improvement (86.6%), with a final PAR score of 2.25 ± 1.15. Minor complications were noted in 3 participants. The need for refinement was unrelated to the total number of aligners (odds ratio, 1.05; 95% confidence interval, 0.94-1.18; P = 0.36). There was weak evidence of an association between the final PAR score and the total number of aligners (odds ratio, -0.03; 95% confidence interval, -0.07 to 0.003, P = 0.07). CONCLUSIONS: On the basis of this preliminary retrospective evaluation, DPAs may be used to manage mild-moderate malocclusion, producing a significant reduction in PAR score. Nevertheless, additional prospective research is required to confirm these findings and compare the relative merits of DPAs to alternatives.

Transfer accuracy of 3D printed versus CAD/CAM milled surgical guides for temporary orthodontic implants: A preclinical micro CT study.

OBJECTIVES: Temporary anchorage devices (TADs) have become an integral part of comprehensive orthodontic treatments. This study evaluated the transfer accuracy of three-dimensional (3D) printed and computer-aided design/computer-aided manufacturing (CAD/CAM) milled surgical guides for orthodontic TADs using micro-computed tomography (CT) imaging in a preclinical trial. METHODS: Overall, 30 surgical guides were used to place TADs into typodonts; 3D printing and CAD/CAM milling were used to produce the guides. The virtual target positions of the TADs were compared to the real positions in terms of spatial and angular deviations using digital superimposition. Micro-CT imaging was used to detect the positions. To evaluate reliability, two investigators collected the measurements twice. Intra-rater and inter-rater correlations were tested. RESULTS: In total, 60 palatal TADs were evaluated. The mean coronal deviations in the print group ranged from 0.15 ± 0.20 mm to 0.71 ± 0.22 mm, whereas in the mill group, they ranged from 0.09 ± 0.15 mm to 0.83 ± 0.23 mm. At the apical tip, the overall deviations in the print group ranged from 0.14 ± 0.56 mm to 1.27 ± 0.66 mm, whereas in the mill group, they ranged from 0.15 ± 0.57 mm to 1.09 ± 0.44 mm. The mean intra-class and inter-class correlation coefficients ranged from 0.904 to 0.987. No statistically significant differences were found between the groups. CONCLUSIONS: CAD/CAM milled guides yielded spatial and angular accuracies comparable to those of 3D printed guides with notable deviations in the vertical positioning of TADs. CLINICAL SIGNIFICANCE: Digital planning of orthodontic temporary implants combines clinical predictability and the safety of surrounding tissue. Therefore, the transfer accuracy of the guides is crucial. This preclinical study was the first to evaluate CAD/CAM milling for orthodontic guides and found its accuracy comparable to that of the current "gold standard".

Effect of post-printing curing time on cytotoxicity of direct printed aligners: A pilot study.

INTRODUCTION: The aim of this in vitro study was to examine the potential impact of different curing times of 3D-printed orthodontic aligners on their cytotoxicity. METHOD: Some 60 samples of aligner material were directly 3D printed using Tera Harz TC-85 DAC resin and randomly allocated to three different curing time groups (14, 24 and 50 min). Zendura FLX samples were used as control. The samples were incubated in saliva for 14 days, and then the supernatant was collected. Human gingival fibroblasts (HGF-1)-CRL2014 were used to evaluate potential cytotoxicity. Furthermore, HGF-1 cells were plated on the samples as well as on a glass control sample. After 72 h of growth, their viability was tested. RESULTS: Compared with the glass, only the 50-min curing time markedly reduced fibroblast cell growth. Additionally, a negative linear trend was observed between curing time and fibroblast growth. In comparison with the aligner control group, all samples, including the aligner control samples, exhibited a significant reduction in the viability of human fibroblasts when exposed to saliva. CONCLUSIONS: 3D directly printed aligners showed a cytotoxic effect similar to that of thermoformed conventional aligners in terms of fibroblasts growth. A linear trend was found between curing time and cells growth, indicating that directly printed aligners could exhibit higher cytotoxicity if exposed to a longer curing time. This dependence on curing time underscores the importance of following a strict manufacturing process.

Midpalatal miniscrew insertion: The accuracy of digital planning and surgical placement.

INTRODUCTION: The objective of this study was to investigate the accuracy of palatal miniscrew insertion, evaluating the effect of guide fabrication and surgical placement. METHODS: Guided insertion of bilateral paramedian palatal miniscrews was undertaken using Appliance Designer software (3Shape, Copenhagen, Denmark). A resin surgical guide (P Pro Surgical Guide; Straumann AG, Basel, Switzerland) was used. Superimposition of the miniscrew position relative to the digital design was undertaken using bespoke software (Inspect 3D module, OnyxCeph; Image Instruments GmbH, Chemnitz, Germany) to assess surgical inaccuracy. Miniscrew position relative to the surgical guide was also assessed to isolate the effect of planning inaccuracies. Both horizontal and vertical discrepancies were evaluated at both implant locations. RESULTS: Twenty-seven patients having bilateral palatal insertions were examined. Mean discrepancies were <0.5 mm, both in the horizontal and vertical planes. The mean overall horizontal and vertical discrepancy between the digital design and final miniscrew position on the left side was 0.32 ± 0.15 mm and 0.34 ± 0.17 mm, respectively. The maximum horizontal discrepancy observed was 0.72 mm. No significant differences were observed in relation to the accuracy of mini-implant positioning on the basis of sidedness, either for horizontal (P = 0.29) or vertical (P = 0.86) discrepancy. CONCLUSIONS: High levels of accuracy associated with guided insertion of paramedian palatal implants were recorded with mean discrepancies of less than 0.5 mm both in the horizontal and vertical planes. No difference in accuracy was noted between the left and right sides. Very minor levels of inaccuracy associated both with surgical techniques and surgical guide fabrication were recorded.

An in vitro comparison of the dimensional stability of four 3D-printed models under various storage conditions.

OBJECTIVES: To investigate the dimensional stability of various 3D-printed models derived from resin and plant-based, biodegradable plastics (PLA) under specific storage conditions for a period of up to 21 weeks. MATERIALS AND METHODS: Four different printing materials, including Draft V2, study model 2, and Ortho model OD01 resins as well as PLA mineral, were evaluated over a 21-week period. Eighty 3D-printed models were divided equally into two groups, with one group stored in darkness and the other exposed to daylight. All models were stored at a constant room temperature (20°C). Measurements were taken at 7-week intervals using the Inspect 3D module in OnyxCeph software (Image Instruments GmbH, Chemnitz, Germany). RESULTS: Dimensional change was noted for all of the models with shrinkage of up to 0.26 mm over the study period. Most contraction occured from baseline to T1, although significant further contraction also arose from T1 to T2 (P < .001) and T1 to T3 (P < .001). More shrinkage was observed when exposed to daylight overall and for each resin type (P < .01). The least shrinkage was noted with Ortho model OD01 resin (0.16 mm, SD = 0.06), and the highest level of shrinkage was observed for Draft V2 resin (0.23 mm, SD = 0.06; P < .001). CONCLUSIONS: Shrinkage of 3D-printed models is pervasive, arising regardless of the material used (PLA or resin) and being independent of the brand or storage conditions. Consequently, immediate utilization of 3D printing for orthodontic appliance purposes may be preferable, with prolonged storage risking the manufacture of inaccurate orthodontic retainers and appliances.

Performance of dental students, orthodontic residents, and orthodontists for classification of midpalatal suture maturation stages on cone-beam computed tomography scans - a preliminary study.

BACKGROUND: Assessment of midpalatal suture maturation on cone-beam computed tomography (CBCT) scans is performed by visual inspection and is therefore subjective. The extent to which the assessment of midpalatal suture maturation is affected by rater experience has not been adequately explored in the existing literature, thus limiting the availability of evidence-based findings. This study compared the outcomes of classification by dental students, orthodontic residents, and orthodontists. METHODS: Three different groups of students, orthodontic residents, and orthodontists evaluated 10 randomly chosen CBCT scans regarding midpalatal suture maturation from a pool of 179 patients (98 female and 81 male patients) aged 8 - 40 years which were previously classified by evaluating CBCT scans. The pool was set as benchmark utilizing midpalatal suture maturation classification by one examiner (OsiriX Lite version 11.0; Pixmeo SARL, Bernex, Switzerland). For assessment of intra-rater reliability of the examiners of each group the randomly chosen subjects were reclassified for midpalatal suture maturation after a wash-out period of two weeks by using the same software. Statistical analysis was performed to evaluate intra- and interrater reliability of the three groups with differing experience level. RESULTS: Groupwise intra-rater reliability assessment between the classification and reclassification was weak for examiners with a low level of experience (k = 0.59). Orthodontists had highest degree of agreement with regard to benchmark classification with an inter-rater reliability to be considered as moderate (k = 0.68). CONCLUSIONS: Assessment of midpalatal suture maturation on CBCT scans appears to be a subjective process and is considerably related to the experience level of the examiner. A high level of clinical experience seems to be favorable but does not necessarily ensure accurate results.

Three-dimensional comparison of tooth-borne and tooth-bone-borne RME appliances: a randomized controlled trial with 5-year follow-up.

OBJECTIVES: To compare the long-term skeletal effects of tooth-borne (TB) and tooth-bone-borne (TBB) rapid maxillary expansion in growing children, using 3D imaging. MATERIALS AND METHODS: In total, 52 consecutive patients who met the eligibility criteria were recruited and allocated to either the TB group, mean age 9.3 years (SD 1.3), or the TBB group, mean age 9.5 years (SD 1.2). Cone-beam computed tomography records and plaster models were taken before (T0), directly after (T1), 1 year after (T2), and 5 years after expansion (T3). RANDOMIZATION: Participants were randomly allocated in blocks of different sizes, using the concealed allocation principle in a 1:1 ratio. The randomization list was also stratified by sex to ensure homogeneity between groups. BLINDING: Due to clinical limitations, only the outcome assessors were blinded to the groups to which the patients were allocated. RESULTS: At T1, the midpalatal suture at its anterior part showed a statistically significant difference between the groups with a mean of 0.6 mm (CI 0.2-1.1) more expansion in the TBB group (P < 0.01). This difference was also more evident in boys at T1 with a mean of 0.8 mm (CI 0.2-1.4) (P < 0.01). These differences, however, blotted out at T2 and T3. The nasal width also showed similar differences between the groups, with a significantly larger expansion in the TBB group by a mean of 0.7 mm (CI 0.1-1.4) (P = 0.03). This group difference in favour of the TBB group was maintained at T2 (1.6 mm) and T3 (2.1 mm) (P < 0.01 T2 and T3, respectively). CONCLUSIONS: Skeletal expansion in the midpalatal suture was significantly higher in the TBB group; however, the magnitude of this expansion was around 0.6 mm more and may not be clinically significant. Skeletal expansion at the level of the nasal cavity was significantly higher in the TBB group. There were no differences between boys and girls with regard to skeletal expansion. TRIAL REGISTRATION: This trial was not registered on any external sites.

Advances in orthodontic clear aligner materials.

Rapid technological improvements in biomaterials, computer-aided design (CAD) and manufacturing (CAM) have endorsed clear aligner therapy (CAT) as a mainstay of orthodontic treatment, and the materials employed for aligner fabrication play an all-important role in determining the clinical performance of clear aligners. This narrative review has attempted to comprehensively encompass the entire gamut of materials currently used for the fabrication of clear aligners and elucidate their characteristics that are crucial in determining their performance in an oral environment. Historical developments and current protocols in aligner fabrication, features of contemporary bioactive materials, and emerging trends related to CAT are discussed. Advances in aligner material chemistry and engineering possess the potential to bring about radical transformations in the therapeutic applications of CAT; in the absence of which, clear aligners would continue to underperform clinically, due to their inherent biomechanical constraints. Finally, while innovations in aligner materials such as shape memory polymers, direct three-dimensional (3D) printed clear aligners and bioactive materials combined with clear aligner materials are essential to further advance the applications of CAT; increased awareness of environmental responsibilities among aligner manufacturers, aligner prescribing clinicians and aligner users is essential for better alignment of our climate change goals towards a sustainable planet.

Risk of root damage after using lateral cephalogram and intraoral scan for guided insertion of palatal miniscrews.

BACKGROUND: Guided insertion of palatal miniscrews using a lateral cephalogram instead of cone beam computed tomography (CBCT) significantly reduces the radiation level for the patient. Till now no data are available on the risk of hitting the incisors in this regard, which is one of the worst clinical complications when inserting a paramedian miniscrew. Hence, this study aims to investigate the distance between the mini-implant and the roots of the central and lateral incisors. METHODS: Lateral cephalogram, an intraoral scan, and CBCT of 20 patients were superimposed. After a miniscrew (1.7 × 8 mm) placement based on intraoral scan and lateral cephalogram, the CBCT was used as control for the distance between the miniscrews and the roots of the incisors. RESULTS: The mean value of the shortest distance between the miniscrew and roots of the incisors in the lateral cephalogram was 4.74 ± 1.67 mm. The distance between both miniscrews and the central incisors measured in the CBCT was 5.03 ± 2.22 mm and 5.26 ± 2.21 mm and between the two miniscrews and the lateral incisors was 4.93 ± 1.91 mm and 5.21 ± 2.64 mm. No significant differences between the distances in the CBCT and the lateral cephalogram could be observed. In one case, the CBCT control revealed the penetration of two palatally displaced canines after insertion based on intraoral scan and lateral cephalogram. CONCLUSIONS: The use of an intraoral scan and a lateral cephalogram for guided paramedian insertion of palatal miniscrews can prevent incisor root damage. This may reduce the radiation since no CBCT seems necessary. The current investigation focuses on the anterior paramedian area of the palate. Outside that region and in complex cases with displaced teeth in the palatal area, a CBCT might be indicated.

The Effects of Additional Filtration on Image Quality and Radiation Dose in Cone Beam CT: An In Vivo Preliminary Investigation.

Purpose: The aim of this study was to investigate the effect of reduced radiation doses on the image quality of cone-beam computed tomography scans and the suitability of such imaging for orthodontics, oral surgery, dental implantology, periodontology, and endodontology. Materials and Methods: Cone-beam computed tomography scans of a live patient were performed using seven attenuation filters with increased thickness to decrease the effective radiation dose from 22.4 to 1.8 µSv, and the effects of different radiation doses on image quality were further analysed. Quantitative image quality was calculated using dedicated measures, such as signal and contrast-to-noise ratio and sharpness. A panel of five certified raters assessed the cone-beam computed tomography scans qualitatively. Nine anatomical structures relevant to dentistry were identified, and the overall acceptance was assessed. Results: Linear reduction of the effective radiation dose had a nonlinear effect on image quality. A 5-fold reduction in the effective dose led to acceptable quantitative and qualitative image quality measures, and the identification rate of dental anatomical structures was 80% or greater. The use of less than 40% of the reference dose was unacceptable for all dental specialties. Conclusions: The ideal radiation dose for specific diagnostic requirements remains a patient-related and specialty-related decision that must be made on an individual basis. Based on the results of this study, it is possible to reduce exposure in selected patients, and at the same time obtain sufficient quality of images for clinical purposes.

The World Wide Web of orthodontics- A comprehensive narrative on teledentistry pertaining to the orthodontics of the 21st century.

Teledentistry has proven effective in practically all dental fields. It also allows access to inaccessible and underdeveloped locations. Better treatment outcomes were documented in patients treated by an orthodontist supervised by teledentistry than by a general dentist with minimal orthodontic experience alone. It may also help to focus referrals to specialists and weed out those who do not need them. But, on a critical note, a doctor-patient relationship is much more than a business transaction. A face-to-face initial consultation instills trust that a remote session cannot. Teledentistry includes professional networking of doctors. This contact includes digital information exchange, CPD programs, case discussions, and analysis that bring dentists from all around the world together to improve patient care. Teledentistry has not only spanned the distance between dentists worldwide, but has also served as a conduit between customer (patient) and manufacturer. This spawned Direct to Consumer (DTC) dentistry, sparking substantial debate among dentists worldwide. In DTC dentistry, inadequately trained customers conduct complex procedures on themselves with minimal guidance of a dentist. One of the major issues today is the general availability of clear aligners to patients without the requirement for an intermediary skilled orthodontist. The American Association of Orthodontists (AAO) has publicly questioned the validity of Smile Direct Club, a private firm that dominates the DTC industry. European Federation of Orthodontic Specialists Association, on the other hand, has sponsored a joint declaration with the representative orthodontic associations in Europe to highlight and alert patients about the potential risks of DTC products. Unfortunately, public shaming hasn't slowed commercialization of DTC firms. Teledentistry has been a boon for healthcare, but a nightmare for our profession, raising fundamental questions like what is the difference between a customer and a patient? Is dentistry a just another discipline of cosmetics? Is teledentistry making us less connected with our patients?

Ultra short time to Echo (UTE) MRI for cephalometric analysis-Potential of an x-ray free fast cephalometric projection technique.

OBJECTIVES: A novel magnetic resonance imaging (MRI) scan protocol is presented on the basis of ultra-short time to echo (UTE). By this MRI cephalometric projections (MCPs) can be acquired without the need of post processing in one shot. Different technical parameterizations of the protocol are performed. Their impact on the performance of MCPs is evaluated in comparison to the gold standard-the lateral cephalometric radiography (LCR) for cephalometric analysis (CA) in orthodontics. METHODS: Seven MCPs with various scan parameters influencing the scan duration and one LCR are used from one subject. 40 expert assessors performed CA for 14 predefined cephalometric landmarks. Relative metric distances and absolute angular measurements were calculated. Statistical analysis is presented and the deviations are highlighted to demonstrate the potential of the method for further analysis. RESULTS: The MCPs are acquired in 5-154 seconds, depending on resolution and contrast. Mean relative distances were 2.4-2.7 mm in MCPs and 1.6 mm in LCR, which demonstrate the accuracy and level of agreement of the expert assessors in identifying anatomical landmarks. In comparison to other studies, the presented MCP performed similar in angular analysis and demonstrated on average deviation of 1.2° ±1.1° in comparison to LCR. Despite the point articulare (Ar) and the related gonial angle the calculate distances and angles show outcomes in the range of ±2°/2mm. CONCLUSIONS: MCPs can be acquired much faster in comparison to other techniques known from literature for CA. This study demonstrated the potential of the new method and showed first feasible results. Further research is needed to analyze the performance on a broad range of patients.

Skeletal and dentoalveolar effects using tooth-borne and tooth-bone-borne RME appliances: a randomized controlled trial with 1-year follow-up.

OBJECTIVES: To evaluate and compare the skeletal and dentoalveolar effects of tooth-borne (TB) and tooth-bone-borne (TBB) rapid maxillary expansion (RME). MATERIALS AND METHODS: Fifty-two consecutive patients who met the eligibility criteria were recruited and allocated to either the TB group, mean age 9.3 years [standard deviation (SD) 1.3], or the TBB group, mean age 9.5 years (SD 1.2). Cone-beam computed tomography (CBCT) records and plaster models were taken before (T0), directly after (T1), and 1 year after expansion (T2). Dentoalveolar and skeletal measurements were made on the CBCT images. The dental expansion was also measured on the plaster models. RANDOMIZATION: Participants were randomly allocated in blocks of different sizes using the concealed allocation principle in a 1:1 ratio. The randomization list was also stratified by sex to ensure homogeneity between groups. BLINDING: Due to clinical limitations, only the outcomes assessors were blinded to the groups to which the patients were allocated. RESULTS: Skeletal expansion in the midpalatal suture and at the level of the nasal cavity was significantly higher in the TBB group. However, the magnitude of the expansion in the midpalatal suture was around 1 mm [95 per cent confidence interval (CI) 0.5-1.7, P = 0.001] more and perhaps not clinically significant. The magnitude of the expansion at the level of the nasal cavity was almost two times higher in the TBB group (95 per cent CI 0.7-2.6, P = 0.001). The dental expansion, alveolar bending, tipping of the molars, and stability 1 year post-expansion did not show any statistically significant differences between the groups. The actual direct cost of the treatment for the TBB group was approximately €300 higher than TB group. LIMITATIONS: Double blinding was not possible due to the clinical limitations. CONCLUSIONS: In young preadolescents with constricted maxilla and no signs of upper airway obstruction, it seems that conventional TB RME achieves the same clinical results with good stability 1 year post-expansion at lower cost. TRIAL REGISTRATION: The trial was not registered.

Treating a severe iatrogenic gingival exposure and lip incompetence - a challenge worthwhile.

This case reports the retreatment of a young adult who had a previous orthodontic history of inappropriate biomechanical strategies leading to iatrogenic effects with the formation of a dual occlusal plane causing anterior dental extrusion. As a result, an already severe dento-skeletal malocclusion with a vertical growth pattern, severe gummy smile, increased overjet and a very deep bite along with procumbent and incompetent lips became exaggerated. The high smile line and heavy convex profile were changed to an average smile line and a straight profile by intruding the anterior maxillary segment with anterior miniscrew anchorage and retracting the whole maxillary arch using IZC screws posteriorly. The treatment effect was similar to an anterior surgical impaction, thereby offering patients a viable alternative. Combining intrusion and gingivectomy produced an aesthetically pleasing smile and profile without the cost, morbidity, and potential complications of orthognathic surgery.