Extraction of Nitric Acid and Uranium with DEHiBA under High Loading Conditions.

The mechanism by which high concentrations (1.5 M in n-dodecane) of N,N-di-2-ethylhexyl-isobutyramide (DEHiBA) extracts HNO3 and UO2(NO3)2 is under examination. Most prior studies have examined the extractant and the mechanism at a concentration of 1.0 M in n-dodecane; however, under the higher loading conditions that can be achieved by a higher concentration of extractant, this mechanism could change. Increased extraction of both nitric acid and uranium is observed with an increased concentration of DEHiBA. The mechanisms are examined by thermodynamic modeling of distribution ratios, 15N nuclear magnetic resonance (NMR) spectroscopy, and Fourier transform infrared (FTIR) spectroscopy coupled with principal component analysis (PCA). Speciation diagrams produced through thermodynamic modeling have been qualitatively reproduced through PCA of the FTIR spectra. The predominant extracted species of HNO3(DEHiBA), HNO3(DEHiBA)2, and UO2(NO3)2(DEHiBA)2 are in good agreement with prior literature reports for 1.0 M DEHiBA systems. Evidence for an additional species of either UO2(NO3)2(DEHiBA) or UO2(NO3)2(DEHiBA)2(HNO3) also contributing to the extraction of uranium species is given.

Multiplicity of Th(IV) and U(VI) HEH[EHP] Chelates at Low Temperatures from Concentrated Nitric Acid Extractions.

Organophosphorus extractants have been widely investigated for lanthanide recovery from ore and for application in the reprocessing of spent nuclear fuel, such as in Advanced TALSPEAK schemes. Determining the speciation of the extracted metal complex in the organic phase remains a significant challenge. A better understanding of the variability of HEH[EHP]-actinide complexes and the speciation of chelates for tetra- and hexavalent actinides can improve the predictability of actinide phase transfer in such biphasic systems. In this study, the extraction of Th(IV) and U(VI) from nitric acid media using HEH[EHP] in heptane is examined. The distribution ratio as a function of nitric acid concentration was quantified using UV-vis spectroscopy, and then the speciation of HEH[EHP]-metal complexes in the organic phase was investigated using Fourier transform infrared (FTIR) spectroscopy and low-temperature 31P nuclear magnetic resonance (NMR) spectroscopy. In addition to perturbation of the vibrational modes proximal to the phosphonic moiety in HEH[EHP] in the FTIR spectra, the appearance of a nitrate signal was found in the organic phase following extraction from the highest acidity conditions for U(VI). The 31P NMR spectra of the organic phase at a low temperature (-70 °C) exhibited a surprising number (n) of resonances (n ≥ 7 for Th(IV) and n ≥ 11 for U(VI)), with the distribution between these resonances changing with the initial concentration of nitric acid in the aqueous phase. These results indicate that the compositions of the inner and outer spheres of the extracted actinides in the organic phase are more diverse than initially thought.

Sensor Fusion: Comprehensive Real-Time, On-Line Monitoring for Process Control via Visible, Near-Infrared, and Raman Spectroscopy.

On-line monitoring based on optical spectroscopy provides unprecedented insight into the chemical composition of process streams or batches. Amplifying this approach through utilizing multiple forms of optical spectroscopy in sensor fusion can greatly expand the number and type of chemical species that can be identified and quantified. This is demonstrated herein, on the analysis of used nuclear fuel recycling streams: highly complex processes with multiple target and interfering analytes. The optical techniques of visible absorbance, near-infrared absorbance, and Raman spectroscopy were combined to quantify plutonium(III, IV, VI), uranium(IV, VI), neptunium(IV, V, VI), and nitric acid. Chemometric modeling was used to quantify analytes in process streams in real time, and results were successfully used to enable immediate process control and generation of a product stream at a set composition ratio. This represents a significant step forward in the ability to monitor and control complex chemical processes occurring in harsh chemical environments.

Evolution of Acid-Dependent Am3+ and Eu3+ Organic Coordination Environment: Effects on the Extraction Efficiency.

Coordination of trivalent lanthanide and actinide metal ions by lipophilic diglycolamides and phosphonic acids has been proposed for their separation through extraction from aqueous nitric acid solutions. However, the nature of M3+ coordination complexes in these combined solvent systems is not well understood, resulting in low predictability of their behavior. This work demonstrates that a combination of N,N,N',N'-tetrakis(2-ethylhexyl)diglycolamide (T2EHDGA) and weakly acidic 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) in n-dodecane exhibits a complicated extraction mechanism for Eu3+ and Am3+, which continuously evolves as a function of the aqueous phase acidity. At low aqueous phase nitric acid concentrations, M3+ ions are primarily extracted via exchange of the phosphonic acid proton and coordination with HEH[EHP]. At high aqueous phase nitric acid concentrations, HEH[EHP] remains protonated, and M3+ ions are transported to the organic phase by the coextraction of nitrate anions from the aqueous phase, thus forming complex species with T2EHDGA. At moderate acid regimes, both ligands participate in the coordination of M3+ ions and show a synergistic relationship resulting in considerable enhancement of M3+ transport into the combined solvent system over the simple sum of the individual extractants. The observed synergism is caused by differences in organic phase M3+ speciation and has a significant impact on the performance of the organic solvent. Distribution studies with Eu3+ indicate that nominally two or three T2EHDGA ligands participate in metal extraction in the presence of phosphonic acid, while nominally three diglycolamide ligands participate in the presence or absence of phosphonic acid. While synergistic behavior has been observed in many solvent-extraction processes, this system demonstrates a clear correlation between the continuously changing organic speciation of M3+ and its transport into the organic solvent. This paper reports the spectroscopic characterization of the organic phase M3+ species by IR, X-ray absorption, and visible spectroscopies. Spectroscopic evidence indicates a mixed-ligand complex, i.e., a ternary complex at the moderate acid regime, where the greatest degree of synergism is observed. Differences in synergistic extraction of Am3+ and Eu3+ at the low acid regime were observed, indicating their dissimilar extraction behavior.

Author Correction: Closing the Nuclear Fuel Cycle with a Simplified Minor Actinide Lanthanide Separation Process (ALSEP) and Additive Manufacturing.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Closing the Nuclear Fuel Cycle with a Simplified Minor Actinide Lanthanide Separation Process (ALSEP) and Additive Manufacturing.

Expanded low-carbon baseload power production through the use of nuclear fission can be enabled by recycling long-lived actinide isotopes within the nuclear fuel cycle. This approach provides the benefits of (a) more completely utilizing the energy potential of mined uranium, (b) reducing the footprint of nuclear geological repositories, and (c) reducing the time required for the radiotoxicity of the disposed waste to decrease to the level of uranium ore from one hundred thousand years to a few hundred years. A key step in achieving this goal is the separation of long-lived isotopes of americium (Am) and curium (Cm) for recycle into fast reactors. To achieve this goal, a novel process was successfully demonstrated on a laboratory scale using a bank of 1.25-cm centrifugal contactors, fabricated by additive manufacturing, and a simulant containing the major fission product elements. Americium and Cm were separated from the lanthanides with over 99.9% completion. The sum of the impurities of the Am/Cm product stream using the simulated raffinate was found to be 3.2 × 10-3 g/L. The process performance was validated using a genuine high burnup used nuclear fuel raffinate in a batch regime. Separation factors of nearly 100 for 154Eu over 241Am were achieved. All these results indicate the process scalability to an engineering scale.

Revisiting complexation thermodynamics of transplutonium elements up to einsteinium.

Literature casts einsteinium as a departure from earlier transplutonium actinides, with a decrease in stability constants with aminopolycarboxylate ligands. This report studies transplutonium chemistry - including Am, Bk, Cf, and Es - with aminopolycarboxylate ligands. Es complexation follows similar thermodynamic and structural trends established by the earlier actinides, consistent with first-principle calculations.

Review of the Scientific Understanding of Radioactive Waste at the U.S. DOE Hanford Site.

This Critical Review reviews the origin and chemical and rheological complexity of radioactive waste at the U.S. Department of Energy Hanford Site. The waste, stored in underground tanks, was generated via three distinct processes over decades of plutonium extraction operations. Although close records were kept of original waste disposition, tank-to-tank transfers and conditions that impede equilibrium complicate our understanding of the chemistry, phase composition, and rheology of the waste. Tank waste slurries comprise particles and aggregates from nano to micro scales, with varying densities, morphologies, heterogeneous compositions, and complicated responses to flow regimes and process conditions. Further, remnant or changing radiation fields may affect the stability and rheology of the waste. These conditions pose challenges for transport through conduits or pipes to treatment plants for vitrification. Additionally, recalcitrant boehmite degrades glass quality and the high aluminum content must be reduced prior to vitrification for the manufacture of waste glass of acceptable durability. However, caustic leaching indicates that boehmite dissolves much more slowly than predicted given surface normalized rates. Existing empirical models based on ex situ experiments and observations generally only describe material balances and have not effectively predicted process performance. Recent advances in the areas of in situ microscopy, aberration-corrected transmission electron microscopy, theoretical modeling across scales, and experimental methods for probing the physics and chemistry at mineral-fluid and mineral-mineral interfaces are being implemented to build robustly predictive physics-based models.

Multivariate Analysis for Quantification of Plutonium(IV) in Nitric Acid Based on Absorption Spectra.

Development of more effective, reliable, and fast methods for monitoring process streams is a growing opportunity for analytical applications. Many fields can benefit from online monitoring, including the nuclear fuel cycle where improved methods for monitoring radioactive materials will facilitate maintenance of proper safeguards and ensure safe and efficient processing of materials. Online process monitoring with a focus on optical spectroscopy can provide a fast, nondestructive method for monitoring chemical species. However, identification and quantification of species can be hindered by the complexity of the solutions if bands overlap or show condition-dependent spectral features. Plutonium(IV) is one example of a species which displays significant spectral variation with changing nitric acid concentration. Single variate analysis (i.e., Beer's Law) is difficult to apply to the quantification of Pu(IV) unless the nitric acid concentration is known and separate calibration curves have been made for all possible acid strengths. Multivariate or chemometric analysis is an approach that allows for the accurate quantification of Pu(IV) without a priori knowledge of nitric acid concentration.

Incorporating spectroscopic on-line monitoring as a method of detection for a Lewis cell setup.

A Lewis cell was designed and constructed for investigating solvent extraction systems by spectrophotometrically monitoring both the organic and aqueous phases in real time. This new Lewis cell was tested and shown to perform well compared to other previously reported Lewis cell designs. The advantage of the new design is that the spectroscopic measurement allows determination of not only metal ion concentrations, but also information regarding chemical speciation - information not available with previous Lewis cell designs. For convenience, the new Lewis cell design was dubbed COSMOFLEX (COntinuous Spectroscopic MOnitoring of Forrest's Liquid-liquid EXtraction cell). After construction performance testing was done for establishing the ideal stir speed range, UV-Vis measured concentration and D value determination. Each one of these tests was satisfactorily passed.

Neodymium(III) Complexes of Dialkylphosphoric and Dialkylphosphonic Acids Relevant to Liquid-Liquid Extraction Systems.

The complexes formed during the extraction of neodymium(III) into hydrophobic solvents containing acidic organophosphorus extractants were probed by single-crystal X-ray diffractometry, visible spectrophotometry, and Fourier-transform infrared spectroscopy. The crystal structure of the compound Nd(DMP)3 (1, DMP = dimethyl phosphate) revealed a polymeric arrangement in which each Nd(III) center is surrounded by six DMP oxygen atoms in a pseudo-octahedral environment. Adjacent Nd(III) ions are bridged by (MeO)2POO(-) anions, forming the polymeric network. The diffuse reflectance visible spectrum of 1 is nearly identical to that of the solid that is formed when an n-dodecane solution of di(2-ethylhexyl)phosphoric acid (HA) is saturated with Nd(III), indicating a similar coordination environment around the Nd center in the NdA3 solid. The visible spectrum of the HA solution fully loaded with Nd(III) is very similar to that of the NdA3 material, both displaying hypersensitive bands characteristic of an pseudo-octahedral coordination environment around Nd. These spectral characteristics persisted across a wide range of organic Nd concentrations, suggesting that the pseudo-octahedral coordination environment is maintained from dilute to saturated conditions.

Separating and stabilizing phosphate from high-level radioactive waste: process development and spectroscopic monitoring.

Removing phosphate from alkaline high-level waste sludges at the Department of Energy's Hanford Site in Washington State is necessary to increase the waste loading in the borosilicate glass waste form that will be used to immobilize the highly radioactive fraction of these wastes. We are developing a process which first leaches phosphate from the high-level waste solids with aqueous sodium hydroxide, and then isolates the phosphate by precipitation with calcium oxide. Tests with actual tank waste confirmed that this process is an effective method of phosphate removal from the sludge and offers an additional option for managing the phosphorus in the Hanford tank waste solids. The presence of vibrationally active species, such as nitrate and phosphate ions, in the tank waste processing streams makes the phosphate removal process an ideal candidate for monitoring by Raman or infrared spectroscopic means. As a proof-of-principle demonstration, Raman and Fourier transform infrared (FTIR) spectra were acquired for all phases during a test of the process with actual tank waste. Quantitative determination of phosphate, nitrate, and sulfate in the liquid phases was achieved by Raman spectroscopy, demonstrating the applicability of Raman spectroscopy for the monitoring of these species in the tank waste process streams.

Characterization of high phosphate radioactive tank waste and simulant development.

A sample of high-level radioactive tank waste was characterized to provide a basis for developing a waste simulant. The simulant is required for pilot-scale testing of pretreatment processes in a nonradiological facility. The waste material examined was derived from the bismuth phosphate process, which was the first industrial process implemented to separate plutonium from irradiated nuclear fuel. The bismuth phosphate process sludge is a complex mixture rich in bismuth, iron, sodium, phosphorus,silicon, and uranium.The form of phosphorus in this particular tank waste material is of specific importance because that is the primary component (other than water-soluble sodium salts) that must be removed from the high-level waste solids by pretreatment. This work shows unequivocally that the phosphorus in this waste material is not present as bismuth phosphate. Rather, the phosphorus appears to be incorporated mostly into an amorphous iron(III) phosphate phase. The bismuth in the sludge solids is best described as BiFeO3. The behavior of phosphorus during caustic leaching of the bismuth phosphate process sludge solids is also discussed.

Bicyclic and acyclic diamides: comparison of their aqueous phase binding constants with Nd(III), Am(III), Pu(IV), Np(V), Pu(VI), and U(VI).

This report describes affinity measurements for two, water-soluble, methyl-alkylated diamides incorporating the malonamide functionality, N,N,N',N' tetramethylmalonamide (TMMA) and a bicyclic diamide (1a), toward actinide metal cations (An) in acidic nitrate solutions. Ligand complexation to actinides possessing oxidation states ranging from +3 to +6 was monitored through optical absorbance spectroscopy, and formation constants were obtained from the refinement of the spectrophotometric titration data sets. Species analysis gives evidence for the formation of 1, 4, 1, and 2 spectrophotometrically observable complexes by TMMA to An(III, IV, V, and VI), respectively, while for 1a, the respective numbers are 3, 4, 2, and 2. Consistent with the preorganization of 1a toward actinide binding, a significant difference is found in the magnitudes of their respective formation constants at each complexation step. It has been found that the binding affinity for TMMA follows the well-established order An(V) < An(III) < An(VI) < An(IV). However, with 1a, Np(V) forms stronger complexes than Am(III). The complexation of 1a with Np(V) and Pu(VI) at an acidity of 1.0 M is followed by reduction to Np(IV) and Pu(IV), whereas TMMA does not perturb the initial oxidation state for these dioxocations. These measurements of diamide binding affinity mark the first time single-component optical absorbance spectra have been reported for a span of actinide-diamide complexes covering all common oxidation states in aqueous solution.

Deliberate design of ligand architecture yields dramatic enhancement of metal ion affinity.

Evaluation of the malonamide substructure with respect to binding site preorganization and complementarity for lanthanide metal ions suggests a new ligand architecture specifically designed to enhance lanthanide ion affinity. Consideration of conformational reorganization, restricted bond rotation, and donor group orientation suggests that typical malonamide structures, for example, N,N,N'N'-tetrahexylpropane-1,3-diamide (1), N,N'-dibutyl-N,N'-dimethyl-2-tetradecylpropane-1,3-diamide (2), or N,N,N'N'-tetramethylpropane-1,3-diamide (6), are poorly organized for metal ion complexation. Molecular mechanics analyses show that the unfavorable enthalpic and entropic terms are eliminated by the use of the novel bicyclic architecture found in 3,9-diaza-3,9-dimethylbicyclo[4.4.0]decane-2,10-dione (7). Diamide 7 was prepared, and the X-ray crystal structure of the complex [Eu(7)(2)(NO(3))(3)] exhibits the same chelate conformation predicted by the molecular mechanics model. A hydrophobic derivative, 3,9-diaza-3,9-dioctylbicyclo[4.4.0]decane-2,10-dione (8), was prepared, and solvent extraction studies reveal that the preorganized architecture of 8 gives a dramatic enhancement in binding affinity, exhibiting Eu(3+) distribution coefficients that are 7 orders of magnitude larger than a typical malonamide ligand, 1.

Coordination of Lanthanide Nitrates with N,N,N',N'-Tetramethylsuccinamide.

Two compound classes have been identified from the reaction of trivalent lanthanide nitrates with tetramethylsuccinamide (TMSA). The nature of these Ln-TMSA compounds has been examined in the solid phase by thermogravimetric analysis (TGA) and single-crystal X-ray diffraction and in solution by infrared spectroscopy. Isostructural, 10-coordinate compounds with a 2:1 TMSA:Ln stoichiometry were found for the lanthanides La and Ce. Single-crystal X-ray diffraction analysis of the Ln-TMSA nitrate compounds, Ln = La and Ce, reveals a polymeric structure with each metal center containing one chelating bidentate succinamide and two bridging bidentate succinamides. For the remaining lanthanides Pr, Nd, Gd, Yb, and Lu, a series of isostructural, 9-coordinate compounds containing a 3:2 TMSA:Ln ratio were formed. Single-crystal X-ray diffraction analysis of the Ln-TMSA products, Ln = Ce, Pr, Nd, Gd, and Yb, reveals these compounds to be dimeric, with each metal center containing one chelating bidentate succinamide and two bridging bidentate succinamides. The solution stoichiometries were examined in acetonitrile-water mixtures and support the stoichiometries observed in the solid-state structures. Cerium nitrate appears to be a special (and transitional) lanthanide in its reaction with TMSA. Although infrared and TGA analyses indicate a 2:1 ligand-to-metal product, crystals for both the 2:1 and 3:2 compounds were isolated. No evidence for such multiple forms was found with any of the other lanthanides.