RESUMEN
We demonstrated a 978â nm laser diode (LD) side-pumped YSGG/Er:YSGG/YSGG composite crystal with a size of Ф 3 mm × 65 mm and continuous-wave (CW) mode. By optimizing resonator length and output mirror transmittance, a maximum output power of 28.02 W is generated, corresponding to slope efficiency of 17.55% and optical-optical efficiency of 12.29%, respectively. The thermal focal lengths are obtained by resonator stability condition. The laser wavelength is centered near 2.8â µm. Moreover, the beam quality factors M x2/M y2 are fitted to be 8.14 and 7.35, respectively. The above results indicate that a high-performance 2.8 µm CW laser can be achieved by LD side-pumped YSGG/Er:YSGG/YSGG composite crystal with excellent heat dissipation ability, which promotes effectively the development and applications of the mid-infrared solid-state lasers.
RESUMEN
High-frequency workpieces have the characteristics of complex intra-class textures and small differences between classes, leading to the problem of low recognition rates when existing models are applied to the recognition of high-frequency workpiece images. We propose in this paper a novel high-frequency workpiece image recognition model that uses EfficientNet-B1 as the basic network and integrates multi-level network structures, designated as ML-EfficientNet-B1. Specifically, a lightweight mixed attention module is first introduced to extract global workpiece image features with strong illumination robustness, and the global recognition results are obtained through the backbone network. Then, the weakly supervised area detection module is used to locate the locally important areas of the workpiece and is introduced into the branch network to obtain local recognition results. Finally, the global and local recognition results are combined in the branch fusion module to achieve the final recognition of high-frequency workpiece images. Experimental results show that compared with various image recognition models, the proposed ML-EfficientNet-B1 model has stronger adaptability to illumination changes, significantly improves the performance of high-frequency workpiece recognition, and the recognition accuracy reaches 98.3%.
RESUMEN
Aiming at the engineering problem of roadway deformation and instability of swelling soft rock widely existed in Kailuan mining area, the mineral composition and microstructure of such soft rock were obtained by conducting scanning electron microscopy, X-ray diffraction experiments, uniaxial and conventional triaxial tests, and the law of softening and expanding of such soft rock and the failure mechanism of surrounding rock were identified. The combined support scheme of multi-level anchor bolt, bottom corner pressure relief and fractional grouting is proposed. The roadway supporting parameters are adjusted and optimized by FLAC3D numerical simulation, and three supporting methods of multi-layer anchor bolt, bottom corner pressure relief and fractional grouting are determined and their parameters are optimized. The study results show that: the total amount of clay minerals is 53-75%, pores, fissures, nanoscale and micron layer gaps are developed, providing a penetrating channel for water infiltration to soften the surrounding rock; the three-level anchor pressure-relief and grouting support technology can control the sinking amount of the roof within 170 mm, the bottom drum amount within 210 mm, the bolts of each level is evenly distributed in tension, and the maximum stress and bottom drum displacement in the pressure relief area are significantly reduced; the pressure-relief groove promotes the development of bottom corner cracks, accelerates the secondary distribution of peripheral stress, and weakens the effect of high stress on the shallow area. Using time or displacement as the index, optimizing the grouting time, filling the primary and excavation cracks, blocking the expansion and softening effect of water on the rock mass, realizing the dynamic unity of structural yielding pressure and surrounding rock modification, has guiding significance for the support control of soft rock roadway.
RESUMEN
We demonstrate the thermal, spectroscopy and laser properties of Ho,Pr doped YAP crystal grown successfully by Cz method. The thermal expansion coefficient, thermal conductivity, absorption and emission spectra of Ho,Pr:YAP crystal are investigated in detail. Additionally, the level lifetimes suggest that Pr3+ is a suitable deactivating ion for Ho:YAP crystal. Particularly, the actual laser performance is optimized by doping active ion Ho with high concentrations and introducing deactivated Pr3+, resulting in decreased laser threshold, increased laser output power and slope efficiency. A 3.01â µm laser with output power of 502â mW, slope efficiency of 6.3% and beam quality factors of 1.42/1.43 is achieved in the Ho,Pr:YAP crystal, as far as we know this is the highest â¼3â µm CW laser power realized in Ho3+ doped oxide crystals.
RESUMEN
In this work, we report on investigations of structure, spectroscopic properties and laser performances of, what we believe to be, a novel Er:YGGAG laser crystal. High crystalline quality is proved by an FWHW of XRC of 0.019°. Thermal conductivity of a 30 at.% Er:YGGAG crystal is determined as 4.98 W/(m·K). The refractive index is measured in the range of 400 to 1000â nm and fitting with Sellmeier equation is done. A broad fluorescence emission band is located at 2786â¼2819â nm, suggesting that this crystal is favorable to realize tunable and ultrafast laser. Under the pump at 969â nm with a fiber-coupled diode laser, at 400â Hz repetition rate and 600 µs pulse duration, the 30 at.% Er:YGGAG delivered maximum average power of 506â mW with overall optical-to-optical efficiency of 12.4% and slope efficiency of 16.9%. The laser beam quality was characterized by M2 factors of 1.53 and 1.39 in horizontal and vertical directions, respectively.
RESUMEN
We demonstrate a 968-nm LD side-pumped Er:YAP laser with concave end-faces and a working frequency of 50â¼1000â Hz. The maximum average powers of 26.75 and 13.18 W are obtained at 250 and 1000â Hz, corresponding to the slope efficiency of 16.2% and 9.0%, respectively. The M2 factors of 7.98 and 1.49 are determined under the multi-mode and single-mode, and three laser wavelengths of 2713, 2732 and 2796â nm are observed. The results indicate that the LD side-pumped Er:YAP crystal with negative curvature end-faces is a promising candidate for the high power and high frequency mid-infrared laser device.
RESUMEN
We demonstrate a novel Er:LuSGG active gain medium emitting laser wavelength at 2795 nm for the first time. The Er:LuSGG crystal is grown successfully by the Czochralski method with high crystalline and optical quality. The spectra properties, including absorption and fluorescence emission cross-section are presented in contrast with similar Er-doped garnet crystals. The fluorescence lifetimes of the upper (4I11/2) and lower (4I13/2) laser levels are 1.75 and 4.64â ms, respectively. Under 973â nm laser diode pumping, a maximum output power of 789â mW in continuous-wave mode, corresponding to optical-to-optical efficiency of 20.2% and slope efficiency of 24.4%, is achieved with high laser beam quality. The results show that the Er:LuSGG is a promising MIR laser material operated at 2.8 µm.
RESUMEN
We demonstrate a laser diode (LD) end-pumped Er:YAP laser with dual-wavelength outputs of 2710 and 2728 nm. The maximum average powers of 739 and 738 mW are achieved in the continuous wave (CW) and pulse modes, which corresponds to optical-to-optical efficiencies of 10.1% and 12.3%, and the slope efficiencies of 12.1% and 13.8%, respectively. In addition, a comparison of laser performance on differently sized crystals indicates that the 1 × 1 × 5 mm3 Er:YAP crystal has a best cooling efficiency. This helps to decrease the thermal lensing effect, which contributes to improving laser efficiency and beam quality.
RESUMEN
We demonstrate a 966 nm laser diode (LD) side-pumped Er,Pr:GYSGG laser crystal operated at 2.79 µm under a high repetition rate. The lifetimes of the upper level I11/24 and lower level I13/24 are 0.66 and 0.85 ms, respectively. The laser performance under different repetition rates and pulse widths is experimentally studied with the optimal cavity structure. A maximum output power of 8.86 W is achieved at 125 Hz and 200 µs pulse widths, corresponding to the slope efficiency of 14.8% and electrical-to-optical efficiency of 7.7%. With increasing frequency from 50 to 200 Hz, the slope efficiency varies from 24.7% to 11.7% operated at a 125 µs pulse width. Moreover, the Mx2/My2 factors of 7.52/7.59 and Θx/Θy far-field divergences of 16.1/16.5 mrad are also measured. The results indicate that a high-performance 2.79 µm laser could be realized on the Er,Pr:GYSGG radiation resistant crystal by deactivation and LD side-pumping.
RESUMEN
Primary ovarian cancer is the main cause of gynecological cancer-associated mortality. However, the mechanism behind the spread of ovarian cancer requires elucidation. The present study aimed to investigate the effects of microRNA-126 (miR-126) on differentiation and invasion, and its mechanism in primary ovarian cancer. Ovarian cancer SKOV3 cells transfected with LV3-has-miR-126 mimics and LV3-has-miR-126 inhibitor were produced; it was revealedthatLV-miR-126 mimics could induce cell cycle arrest at G1 phase, suppress cell invasion through Matrigel-coated membranes and downregulate the expression of vascular endothelial growth factor (VEGF). Furthermore, LV-has-miR-126 inhibitor-transfected cells could increase the number of cells in S phase, induce cell invasion and upregulate the expression of VEGF. The present study, to the best of our knowledge, is the first to report that miR-126 may serve tumor suppressor roles by inducing G1 cell cycle arrest and suppressing invasion in ovarian cancer cells, at least in part by targeting VEGF expression.
RESUMEN
We demonstrate the thermal analysis and laser performance of a GYSGG/Cr,Er,Pr:GYSGG composite crystal. The lifetime ratio of lower and upper levels of Er3+ in Cr,Er,Pr:GYSGG crystal is further reduced due to the optimized doping concentrations. The thermal effect of composite crystal is lower than that of Cr,Er,Pr:GYSGG crystal. A maximum pulse energy 342.8 mJ operated at 5 Hz and 2.79 µm is obtained on the composite crystal, corresponding to electrical-to-optical efficiency of 0.86% and slope efficiency of 1.08%. Under the same condition, these values on the Cr,Er,Pr:GYSGG crystal are only 315.8 mJ, 0.79% and 1.04%, respectively. Moreover, the composite crystal has also a relative high laser beam quality, exhibiting obvious advantage in reducing thermal effects and improving laser performances.
RESUMEN
We demonstrate the growth, spectroscopy, and laser performance of a 2.79 µm Cr,Er,Pr:GYSGG radiation-resistant crystal. The lifetimes for the upper laser level (4)I(11/2) and lower laser level (4)I(13/2) are 0.59 and 0.84 ms, respectively, which are due to the doping of the Pr(3+) ions. A maximum pulse energy of 278 mJ operated at 10 Hz and 2.79 µm is obtained when pumped with a flash lamp, which corresponds to the electrical-to-optical efficiency of 0.6% and a slope efficiency of 0.7%. A maximum average power of 2.9 W at 60 Hz is achieved, which corresponds to the electrical-to-optical efficiency of 0.4% and slope efficiency of 0.8%. Compared with a Cr,Er:YSGG crystal, the Cr,Er,Pr:GYSGG crystal can be operated at a higher pulse repetition rate. These results suggest that doping deactivator Pr(3+) ions can effectively decrease the lower laser level lifetime and improve the laser repetition rate. Therefore, the application fields and range of the Cr,Er,Pr:GYSGG laser can be extended greatly due to its properties of radiation resistance and high repetition frequency.
Asunto(s)
Láseres de Estado Sólido , Análisis Espectral , Absorción de RadiaciónRESUMEN
We demonstrate a comparative investigation on Er,Pr:GYSGG and GYSGG/Er,Pr:GYSGG composite crystals at 2.79 µm. Simulating results show the highest temperatures are 369 K and 318 K, respectively. A maximum output power of 825 mW with slope efficiency of 19.2% and maximum laser energy of 3.65 mJ with slope efficiency of 22.7% are obtained in the GYSGG/Er,Pr:GYSGG composite crystal, which have an obvious improvement than those of Er,Pr:GYSGG crystal. The thermal focal lengths are respectively 41 and 62 mm when the pump power is 2.5 W. All these results indicate that the GYSGG/Er,Pr:GYSGG composite crystal has great advantages in reducing the influence of thermal effects and improving laser performances.
RESUMEN
We demonstrate a 968 nm diode end-pumped Er,Pr:GYSGG (Gd1.17Y1.83Sc2Ga3O12) laser at 2.79 µm operated in the pulse and continuous-wave (CW) modes. The lifetimes for the upper laser level 4I11/ 2 and lower level 4I13/2 are 0.52 and 0.60 ms, respectively. The laser produces 284 mW of power in the CW mode, corresponding to the optical-to-optical efficiency of 14.8% and slope efficiency of 17.4%. The maximum laser energy achieved is 2.4 mJ at a repetition rate of 50 Hz and pulse duration of 0.5 ms, corresponding to a peak power of 4.8 W and slope efficiency of 18.3%. These results suggest that doping deactivator Pr3+ ions can effectively decrease the lower-level lifetime and improve the laser efficiency.
RESUMEN
We demonstrate a diode end-pumped Yb, Er, Ho:Gd(1.17)Y(1.83)Sc(2)Ga(3)O(12) (GYSGG) laser operated at 2.79 µm in continuous-wave mode. Spectral analysis shows that Yb(3+) and Ho(3+) act as sensitizer and deactivator ions, respectively. Pumping with a 967 nm laser diode produces the maximum output power of 411 mW, corresponding to optical-optical conversion and slope efficiencies of 11.6% and 13.1%, respectively. The minimum laser threshold is only 81 mW because of Ho(3+) doping. The laser properties are only slightly influenced by 100 mrad gamma irradiation. The Yb, Er, Ho:GYSGG crystal possesses excellent radiation resistance and is a potential laser gain medium in radiant environments.