Enhancing ozone catalytic decomposition through acid treatment of α-MnO2 for improved activity and humidity resistance.

Post-etching method using dilute acid solutions is an effective technology to modulate the surface compositions of metal-oxide catalysts. Here the α-MnO2 catalyst treated with 0.1 mol/L nitric acid exhibits higher ozone decomposition activity at high relative humidity than the counterpart treated with acetic acid. Besides the increases in surface area and lattice dislocation, the improved activity can be due to relatively higher Mn valence on the surface and newly-formed Brønsted acid sites adjacent to oxygen vacancies. The remnant nitro species deposited on the catalyst by nitric acid treatment is ideal hydrophobic groups at ambient conditions. The decomposition route is also proposed based on the DRIFTS and DFT calculations: ozone is facile to adsorb on the oxygen vacancy, and the protonic H of Brønsted acid sites bonds to the terminal oxygen of ozone to accelerate its cleavage to O2, reducing the reaction energy barrier of O2 desorption.

Direct regeneration of LiFePO4 cathode by inherent impurities in spent lithium-ion batteries.

The direct regeneration method, recognized for its cost-effectiveness, has garnered considerable attentions in the field of battery recycling. In this study, a novel direct regeneration strategy is proposed to repair spent LiFePO4 (S-LFP) cathodes without the need for impurity removal. Instead, the residual conductive carbon and polyvinylidene fluoride (PVDF) in S-LFP are employed as inherent reductive agents. Systematic characterization and analysis reveal that the failure of S-LFP primarily originates from a substantial loss of Li+ and the conversion of LiFePO4 to FePO4. Meanwhile, it is demonstrated that both residual conductive carbon and PVDF play positive roles in promoting the regeneration of S-LFP through distinct mechanisms. As a result, the regenerated LFP exhibits significant recovery in crystal structure and chemical composition as compared to S-LFP, which leads to notably improved lithium storage performance. Furthermore, to further enhance the lithium storage property, a specific amount of glucose (10 %) is introduced during the regeneration of S-LFP, yielding a regenerated product that performs comparably to commercial LFP. Clearly, our approach, in contrast to traditional regeneration methods, maximizes the utilization of residual impurities within S-LFP, resulting in effective regeneration of S-LFP, thereby proving both informative and cost-effective.

Stable and antibacterial tannic acid-based covalent polymeric hydrogel for highly selective Pb2+ recovery from lead-acid battery industrial wastewater.

The resource of trace lead (Pb2+) from wastewater bearing intricate components is imperative for sustainable progression of the lead-acid battery industry. Herein, we fabricated a tannic acid-based covalent polymeric hydrogel (TA@PMAM) with antimicrobial properties and stability via facile Michael addition reaction. The incorporation of tannic acid (TA) through robust covalent bond leads to a stable porous 3D covalent polymer network with almost no loss of mechanical properties even after 20 compression cycles. Batch adsorption experiments of TA@PMAM revealed an extraordinary adsorption capacity of Pb2+(Qe =196.6 mg/g), achieving 87.2 % of Pb2+ adsorption within the first 5 min owing to porous structure, numerous adsorption sites and good hydrophilicity. Moreover, TA@PMAM demonstrated a strong affinity for Pb2+ in the presence of the interfere metal ions (Cu2+, Co2+, Mn2+etc.) due to the carbonyl and phenolic hydroxyl that can specifically pair with Pb2+. Stable adsorption properties of TA@PMAM were confirmed in fixed bed column adsorption experiment using lead-acid batteries wastewater, retaining 79.56 % of initial adsorption capacity even after 10 times' reuse. Besides, TA@PMAM possesses a broad spectrum of antimicrobial properties. This study sheds novel light on the design and fabrication of adsorbent, which holds great potential for commercialization in recovering lead from battery industrial wastewater.

Synergistic optimization of baffles and aeration to improve the Light/Dark cycle of microalgae photobioreactor for enhanced nitrogen removal performance: Computational fluid dynamics and experimental verification.

Microalgae photobioreactor (PBR) is a kind of efficient wastewater treatment system for nitrogen removal. However, there is still an urgent need for process optimization of PBR. Especially, the synergistic effect and optimization of light and flow state poses a challenge. In this study, the computational fluid dynamics is employed for simulating the optimization of the number and length of the internal baffles, as well as the aeration rate of PBR, which in turn leads to the optimal growth of microalgae and efficient nitrogen removal. After optimization, the Light/Dark cycle of the reactor B is shortened by 51.6 %, and the biomass increases from 0.06 g/L to 3.94 g/L. In addition, the removal rate of NH4+-N increased by 106.0 % to 1.56 mg L-1 h-1. This work provides a feasible method for optimizing the design and operational parameters of PBR aiming the engineering application.

S-scheme carbon doped-TiO2/ZnIn2S4 heterojunction for enhanced photocatalytic degradation of microcystin-LR and hydrogen evolution.

Photocatalytic degradation of pollutants coupled with hydrogen (H2) evolution has emerged as a promising solution for environmental and energy crises. However, the fast recombination of photoexcited electrons and holes limits photocatalytic activities. Herein, an S-scheme heterojunction carbon doped-TiO2/ZnIn2S4 (C-TiO2/ZnIn2S4) was designed by substituting oxygen sites within C-TiO2 by ZnIn2S4. Under visible light irradiation, the optimal C-TiO2/ZnIn2S4 exhibits a higher degradation efficiency (88.6%) of microcystin-LR (MC-LR), compared to pristine C-TiO2 (72.9%) and ZnIn2S4 (66.8%). Furthermore, the H2 yield of the C-TiO2/ZnIn2S4 reaches 1526.9 µmol g-1 h-1, which is 3.83 times and 2.87 times that of the C-TiO2 and ZnIn2S4, respectively. Experimental and theoretical investigations reveal that an internal electric field (IEF) informed in the C-TiO2/ZnIn2S4 heterojunction, accelerates the separation of photogenerated charge pairs, thereby enhancing photocatalytic efficiency of MC-LR degradation and H2 production. This work highlights a new perspective on the development of high-performance photocatalysts for wastewater treatment and H2 generation.

A new microalgal negative carbon technology for landfill leachate treatment: Simultaneous removal of nitrogen and phosphorus.

Replete with ammonia nitrogen and organic pollutants, landfill leachate typically undergoes treatment employing expensive and carbon-intensive integrated techniques. We propose a novel microalgae technology for efficient, low-carbon simultaneous treatment of carbon, nitrogen, and phosphorus in landfill leachate (LL). The microbial composition comprises a mixed microalgae culture with Chlorella accounting for 82.58%. After seven days, the process with an N/P ratio of approximately 14:1 removed 98.81% of NH4+-N, 88.62 % of TN, and 99.55% of TP. Notably, the concentrations of NH4+-N and TP met the discharge standards, while the removal rate of NH4+-N was nearly three times higher than previously reported in relevant studies. The microalgae achieved a removal efficiency of 64.27% for Total Organic Carbon (TOC) and 99.26% for Inorganic Carbon (IC) under mixotrophic cultivation, yielding a biomass of 1.18 g/L. The treatment process employed in this study results in a carbon emissions equivalent of -8.25 kgCO2/kgNremoved, representing a reduction of 33.56 kgCO2 compared to the 2AO + MBR process. In addition, shake flask experiments were conducted to evaluate the biodegradability of leachate after microalgae treatment. After microalgae treatment, the TOCB (Biodegradable Total Organic Carbon)/TOC ratio decreased from 56.54% to 27.71%, with no significant improvement in biodegradability. It establishes a fundamental foundation for further applied research in microalgae treatment of leachate.

Acyl chloride-mediated synthesis of rhodanine-modified UiO-66 for high-efficiency silver recovery.

Silver (Ag) recovery is essential for ecological protection, human health and economic benefits. Effective capture of Ag(I) from wastewater is still challenging due to insufficient accessible sites of adsorbents. Herein, an acyl chloride-mediated strategy is developed to synthesize rhodanine (Rd) modified UiO-66 derivatives for Ag(I) adsorption. Benefitting from the high grafting density of Rd, the optimal Rd-modified UiO-66-NH2 (UiO-66-NH2@20Rd) features an ultra-high uptake capacity (maximum capacity of 923.9 mg·g-1) and selectivity (maximum selectivity coefficient of 1665.52) for Ag(I). Almost 90 % of Ag(I) could be captured in one minute over UiO-66-NH2@20Rd and maintained a removal rate of 98.9 % even after six cycles. Moreover, a fixed-bed column test demonstrates that approximately 21,780 bed volumes of Ag(I) simulated wastewater can be effectively treated, indicating great promise for practical application. Mechanism investigation illustrates that outstanding performance can be attributed to the synergistic effect of Ag(I) adsorption and reduction on dense rhodanine sites. This study highlights that such a general strategy can provide a valuable avenue toward various functional adsorption materials.

Enhancing the Lewis acidity of single atom Tb via introduction of boron to achieve efficient photothermal synergistic CO2 cycloaddition.

Nowadays, it is becoming increasingly urgent to lower the escalating carbon dioxide (CO2) to reduce greenhouse effect. Fortunately, it is an ideal strategy by using the inexhaustible solar energy as the driving force to manipulate the cycloaddition reaction, the atomic efficiency of which is 100 %. This work represents the first attempt on utilization of rare-earth metal Tb with atomic dispersion, and the structure of Tb coordinated with 4 N-atoms and 2B-atoms was constructed on interconnected carbon hollow spheres. The introduction of electron-deficient B reduces the electron density of Tb, thereby boosting Lewis acidity and promoting the occurrence of ring-opening reaction. The mechanism exploration enunciates that TbN4B2/C is a photothermal synergistic catalyst, the combined action of photogenerated electrons and strong Lewis acidic site of Tb reduces the free energy of the rate-determining step, and then improving the yield of cyclic carbonate up to 739 mmol g-1h-1.

Selective exposure of (111) crystal plane in Pd49Ag30Te4 by Tb doping to weaken Pd - C bond and promote electroreduction of CO2 to CO.

Employing electric energy to convert carbon dioxide (CO2) into valuable small molecules is a potentially practical method in energy storage and greenhouse gas alleviation. A huge challenge for electrocatalytic CO2 reduction is to reduce overpotential to improve energy efficiency. Herein, we demonstrate that doping alloy Pd49Ag30Te4 (PAT) with rare-earth element Tb is beneficial for selective exposure of (111) crystal plane, which is a highly active crystal plane for producing carbon monoxide (CO). The as-prepared Tb2.9PAT exhibited high electrocatalytic performance with 95.7 % CO faradic efficiency at - 0.8 V (vs RHE), far exceeding that of PAT, and coupled with good durability. In situ spectral study and theoretical calculations disclose that the introduction of Tb regulates the d-band center of PAT alloy, weakens the Pd - C bonding ability, and promotes the desorption of *CO in the rate-determining step. This study provides a method for doping induced selective exposure of crystal face, which provides new idea for improving catalytic performance.

Direct Regeneration of Spent Lithium-Ion Battery Cathodes: From Theoretical Study to Production Practice.

Direct regeneration method has been widely concerned by researchers in the field of battery recycling because of its advantages of in situ regeneration, short process and less pollutant emission. In this review, we firstly analyze the primary causes for the failure of three representative battery cathodes (lithium iron phosphate, layered lithium transition metal oxide and lithium cobalt oxide), targeting at illustrating their underlying regeneration mechanism and applicability. Efficient stripping of material from the collector to obtain pure cathode material has become a first challenge in recycling, for which we report several pretreatment methods currently available for subsequent regeneration processes. We review and discuss emphatically the research progress of five direct regeneration methods, including solid-state sintering, hydrothermal, eutectic molten salt, electrochemical and chemical lithiation methods. Finally, the application of direct regeneration technology in production practice is introduced, the problems exposed at the early stage of the industrialization of direct regeneration technology are revealed, and the prospect of future large-scale commercial production is proposed. It is hoped that this review will give readers a comprehensive and basic understanding of direct regeneration methods for used lithium-ion batteries and promote the industrial application of direct regeneration technology.

Integrated influence of sulfide modification on the reactivity of nanoscale zero-valent iron towards decabromodiphenyl ether under an electromagnetic field.

Individual application of sulfide modification and electromagnetic field (EMF) can enhance the reactivity of nanoscale zero-valent iron (nZVI), yet the potential of both in combination is not clear. This work found that the reactivity of nZVI towards decabromodiphenyl ether was significantly enhanced by the combined effect of sulfidation and EMF. The specific reaction rate constant of nZVI increased by 7 to 10 times. A series of characterization results revealed that the sulfidation level not only affects the inherent reactivity but also the magnetic-induced heating (MIH) and corrosion (MIC) of nZVI. These collectively influence the degradation efficiency of nZVI under EMF. Sulfidation generally diminished the MIH effect. The low degree of sulfidation (S/Fe = 0.1) slightly reduced the MIC effect by 21.4%. However, the high degree of sulfidation (S/Fe = 0.4) led to significantly enhanced MIC effect by 107.1%. For S/Fe = 0.1 and 0.4, the overall enhancement in the reactivity resulting from EMF was alternately dominated by the contributions of MIH and MIC. This work provides valuable insights into the MIH and MIC effects about the sulfidation level of nZVI, which is needed for further exploration and optimization of this combined technology.

A Novel Polyfunctional Polyurethane Acrylate Derived from Castor Oil-Based Polyols for Waterborne UV-Curable Coating Application.

Because of its unique molecular structure and renewable properties, vegetable oil has gradually become the focus of researchers. In this work, castor oil was first transformed into a castor oil-based triacrylate structure (MACOG) using two steps of chemical modification, then it was prepared into castor oil-based waterborne polyurethane acrylate emulsion, and finally, a series of coating materials were prepared under UV curing. The results showed that with the increase in MACOG content, the glass transition temperature of the sample was increased from 20.3 °C to 46.6 °C, and the water contact angle of its surface was increased from 73.85 °C to 90.57 °C. In addition, the thermal decomposition temperature, mechanical strength, and water resistance of the samples were also greatly improved. This study not only provides a new idea for the preparation of waterborne polyurethane coatings with excellent comprehensive properties but also expands the application of biomass material castor oil in the field of coating.

Exceptional anti-toxic growth of water spinach in arsenic and cadmium co-contaminated soil remediated using biochar loaded with Bacillus aryabhattai.

Functionalized biochars are crucial for simultaneous soil remediation and safe agricultural production. However, a comprehensive understanding of the remediation mechanism and crop safety is imperative. In this work, the all-in-one biochars loaded with a Bacillus aryabhattai (B10) were developed via physisorption (BBC) and sodium alginate embedding (EBC) for simultaneous toxic As and Cd stabilization in soil. The bacteria-loaded biochar composites significantly decreased exchangeable As and Cd fractions in co-contaminated soil, with enhanced residual fractions. Heavy metal bioavailability analysis showed a maximum CaCl2-As concentration decline of 63.51% and a CaCl2-Cd decline of 50.96%. At a 3% dosage of composite, rhizosphere soil showed improved organic matter, cation exchange capacity, and enzyme activity. The aboveground portion of water spinach grown in pots was edible, with final As and Cd contents (0.347 and 0.075 mg·kg⁻¹, respectively) meeting food safety standards. Microbial analysis revealed the composite's influence on the rhizosphere microbial community, favoring beneficial bacteria and reducing plant pathogenic fungi. Additionally, it increased functional microorganisms with heavy metal-resistant genes, limiting metal migration in plants and favoring its growth. Our research highlights an effective strategy for simultaneous As and Cd immobilization in soil and inhibition of heavy metal accumulation in vegetables.

Salinity-mediated enhancement of quaternary ammonium compounds resistance and removal in endophytic bacteria LSE01.

The widespread usage of quaternary ammonium compounds (QACs) as disinfectants during the COVID-19 pandemic poses significant environmental risks, such as toxicity to organisms and the emergence of superbugs. In this study, different inorganic salts (NaCl, KCl, CaCl2, MgCl2) were used to induce endophytes LSE01 isolated from hyperaccumulating plants. After five generations of cultivation under 80 g/L NaCl, the minimum inhibitory concentration (MIC) of LSE01 to QACs increased by about 3-fold, while its degradation extent increased from 8% to 84% for C12BDMA-Cl and 5%-89% for C14BDMA-Cl. Transmission electron microscopy (TEM) and three-dimensional fluorescence spectra indicated that the cells induced by high concentration of salt caused plasmolysis and secreted more bound extracellular polymeric substances (B-EPS); these changes are likely to be an important reason for the observed increased resistance and enhanced degradation extent of LSE01 to QACs. Our findings suggest that salt-induction could be an effective way to enhance the resistance and removal of toxic organic pollutants by functional microorganisms.

Resourceful application and mechanism of oyster shell-microalgae synergistic system：Sustainable treatment of harsh low carbon nitrogen ratio actual wastewater.

Microalgal technology holds great promise for both low C/N wastewater treatment and resource recovery simultaneously. Nevertheless, the advancement of microalgal technology is hindered by its reduced nitrogen removal efficiency in low C/N ratio wastewater. In this work, microalgae and waste oyster shells were combined to achieve a total inorganic nitrogen removal efficiency of 93.85% at a rate of 2.05 mg L-1 h-1 in low C/N wastewater. Notably, over four cycles of oyster shell reuse, the reactor achieved an average 85% ammonia nitrogen removal extent, with a wastewater treatment cost of only $0.092/ton. Moreover, microbial community analysis during the reuse of oyster shells revealed the critical importance of timely replacement in inhibiting the growth of non-functional bacteria (Poterioochromonas_malhamensi). The work demonstrated that the oyster shell - microalgae system provides a time- and cost-saving, environmental approach for the resourceful treatment of harsh low C/N wastewater.

Bidirectional Enhancement of Nitrogen Removal by Indigenous Synergetic Microalgal-Bacterial Consortia in Harsh Low-C/N Wastewater.

Conventional microalgal-bacterial consortia have limited capacity to treat low-C/N wastewater due to carbon limitation and single nitrogen (N) removal mode. In this work, indigenous synergetic microalgal-bacterial consortia with high N removal performance and bidirectional interaction were successful in treating rare earth tailing wastewaters with low-C/N. Ammonia removal reached 0.89 mg N L-1 h-1, 1.84-fold more efficient than a common microalgal-bacterial system. Metagenomics-based metabolic reconstruction revealed bidirectional microalgal-bacterial interactions. The presence of microalgae increased the abundance of bacterial N-related genes by 1.5- to 57-fold. Similarly, the presence of bacteria increased the abundance of microalgal N assimilation by 2.5- to 15.8-fold. Furthermore, nine bacterial species were isolated, and the bidirectional promotion of N removal by the microalgal-bacterial system was verified. The mechanism of microalgal N assimilation enhanced by indole-3-acetic acid was revealed. In addition, the bidirectional mode of the system ensured the scavenging of toxic byproducts from nitrate metabolism to maintain the stability of the system. Collectively, the bidirectional enhancement system of synergetic microalgae-bacteria was established as an effective N removal strategy to broaden the stable application of this system for the effective treatment of low C/N ratio wastewater.

Functionally responsive hydrogels with salt-alkali sensitivity effectively target soil amelioration.

The long-standing crisis of soil salinization and alkalization poses a significant challenge to global agricultural development. High soil salinity-alkalinity, water dispersion, and nutrient loss present major hurdles to soil improvement. Novel environmentally friendly gels have demonstrated excellent water retention and slow-release capabilities in agricultural enhancement. However, their application for improving saline-alkali soil is both scarce and competitive. This study proposes a new strategy for regulating saline-alkali soil using gel-coated controlled-release soil modifiers (CWR-SRMs), where radical-polymerized gels are embedded on the surface of composite gel beads through spray coating. Characterization and performance analysis reveal that the three-dimensional spatial network structure rich in hydrophilic groups exhibits good thermal stability (first-stage weight loss temperature of 257.7 °C in thermogravimetric analysis) and encapsulation efficiency for fulvic acid­potassium (FA-K), which can enhance soil quality in saline-alkali environments. The molecular chain relaxation under saline-alkali conditions promotes a synergistic effect of swelling and slow release, endowing it with qualifications as a water reservoir, Ca2+ source unit, and slow-release body. The results of a 6 weeks incubation experiment on 0-20 cm saline-alkaline soil with different application gradients showed that the gradient content had a significant effect on the soil improvement effect. Specifically, the T2 (the dosage accounted for 1 % of soil mass) treatment significantly increases water retention (30 % ~ 90 %), and nutrient levels (30 % ~ 50 %), while significantly decreasing soil sodium colloid content (30 % ~ 60 %) and soil pH (10 % ~ 15 %). Furthermore, PCA analysis indicates that the addition of 1 % CWR-SRMs as amendments can significantly adjust the negative aspects of soil salinity and alkalinity. This highlights the excellent applicability of CWR-SRMs in improving saline-alkali agricultural ecosystems, demonstrating the potential value of novel environmentally friendly gels as an alternative solution for soil challenges persistently affected by adverse salinity and alkalinity.

Metal element-based adsorbents for phosphorus capture: Chaperone effect, performance and mechanism.

Excessive phosphorus (P) enters the water bodies via wastewater discharges or agricultural runoff, triggering serious environmental problems such as eutrophication. In contrast, P as an irreplaceable key resource, presents notable supply-demand contradictions due to ineffective recovery mechanisms. Hence, constructing a system that simultaneously reduce P contaminants and effective recycling has profound theoretical and practical implications. Metal element-based adsorbents, including metal (hydro) oxides, layered double hydroxides (LDHs) and metal-organic frameworks (MOFs), exhibit a significant chaperone effect stemming from strong orbital hybridization between their intrinsic Lewis acid sites and P (Lewis base). This review aims to parse the structure-effect relationship between metal element-based adsorbents and P, and explores how to optimize the P removal properties. Special emphasis is given to the formation of the metal-P chemical bond, which not only depends on the type of metal in the adsorbent but also closely relates to its surface activity and pore structure. Then, we delve into the intrinsic mechanisms behind these adsorbents' remarkable adsorption capacity and precise targeting. Finally, we offer an insightful discussion of the prospects and challenges of metal element-based adsorbents in terms of precise material control, large-scale production, P-directed adsorption and effective utilization.

Insight into the Alkali Resistance Mechanism of FeMoTiOx Catalysts for NH3 Selective Catalytic Reduction of NO: Self-Defense Effects of MoOx for Alkali Capture.

The deactivation of selective catalytic reduction (SCR) catalysts caused by alkali metal poisoning remains an insurmountable challenge. In this study, we examined the impact of Na poisoning on the performance of Fe and Mo co-doped TiO2 (FeaMobTiOx) catalysts in the SCR reaction and revealed the related alkali resistance mechanism. On the obtained Fe1Mo2.6TiOx catalyst, the synergistic catalytic effect of uniformly dispersed FeOx and MoOx species leads to remarkable catalytic activity, with over 90% NO conversion achieved in a wide temperature range of 210-410 °C. During the Na poisoning process, Na ions predominantly adsorb on the MoOx species, which exhibit stronger alkali resistance, effectively safeguarding the FeOx species. This preferential adsorption minimizes the negative effect of Na poisoning on Fe1Mo2.6TiOx. Moreover, Na poisoning has little influence on the Eley-Rideal reaction pathway involving adsorbed NHx reacting with gaseous NOx. After Na poisoning, the Lewis acid sites were deteriorated, while the abundant Brønsted acid sites ensured sufficient NHx adsorption. As a benefit from the self-defense effects of active MoOx species for alkali capture, FeaMobTiOx exhibits exceptional alkali resistance in the SCR reaction. This research provides valuable insights for the design of highly efficient and alkali-resistant SCR catalysts.